PubMed Health⌕ Search

Biomedical subjects

C M Kay

Publications and source records attributed to C M Kay.

At least 55 records · Page 3Linked to original sources
PubMed1997

Bacterial overexpression, isotope enrichment, and NMR analysis of the N-terminal domain of human apolipoprotein E.

The nucleotide sequence encoding the N-terminal domain (residues 1-183) of human apolipoprotein E3 (apoE3) was cloned into the pET expression vector and introduced into Escherichia coli. Induction of protein expression with isopropyl beta-D-thiogalactopyranoside resulted in production of recombinant apoE3(1-183). Immunoblot analysis revealed that recombinant protein was present in both the cell pellet and cell culture supernatant. Analysis revealed that a significant portion of the rApoE3(1-183) in the cell pellet still possessed the bacterial N-terminal pel B leader sequence, encoded by plasmid DNA directly upstream of the apoE3(1-183) coding sequence. By contrast, this hydrophobic leader sequence had been removed from recombinant protein specifically accumulating in the culture medium. This behavior is novel for bacterial expression of apolipoprotein E and its truncated variants and permits efficient overexpression of the recombinant protein (> 100 mg/L cell culture). Recombinant apoE3(1-183) was isolated by a combination of heparin-Sepharose chromatography and reverse-phase HPLC. Electrospray mass spectrometry provided a mass of 21 191 daltons, corresponding directly to that expected from the known sequence. Circular dichroism spectroscopy revealed that the recombinant protein possesses significant amounts of alpha-helical secondary structure. The lipid binding ability of rApoE3(1-183) was evaluated using an in vitro lipoprotein binding assay. It was observed that recombinant apoE3(1-183) protected human low density lipoprotein (LDL) from lipid accumulation induced particle aggregation, indicating that it is capable of associating with lipoprotein surfaces. In addition, rApoE3(1-183) forms disk complexes with the model phospholipid dimyristoylphosphatidylcholine. In competition experiments, it was observed that rApoE3(1-183) phospholipid disks compete with 125I-LDL for binding to the apoB/E receptor on human skin fibroblasts to an extent similar to that observed for intact rApoE3. Taken together, these data show that recombinant apoE3(1-183) is fully functional as an apolipoprotein and receptor ligand. Given the high expression level and its known existence as a monomer in solution, we evaluated the potential for application of NMR spectroscopy to study the structure-function relationship of rApoE3(1-183). Bacteria were cultured in media supplemented with 15NH4Cl or [15N]glycine and the isotopically labeled recombinant apoE3(1-183) was analyzed by heteronuclear single quantum correlation NMR spectroscopy. The data revealed that rApoE3(1-183) is an excellent candidate for solution structure studies by NMR, including conformational adaptations associated with lipid association.

Apolipoprotein E3↗
PubMed1996

The Grb2-mSos1 complex binds phosphopeptides with higher affinity than Grb2.

Epidermal growth factor (EGF) stimulation leads to autophosphorylation of the epidermal growth factor receptor (EGFR) and tyrosine phosphorylation of Shc. The Grb2 SH2 domain binds to Tyr1068 of EGFR and Tyr317 of Shc while its SH3 domains bind to mSos1. Therefore, EGF treatment potentially results in the formation of several multimeric signaling complexes, including EGFR-Grb2-mSos1, EGFR-Shc-Grb2-mSos1, and Shc-Grb2-mSos1, linking the receptor to activation of the Ras GTPase. We have purified Grb2, mSos1, and the Grb2-mSos1 complex to high homogeneity, and used these isolated proteins to obtain binding affinities of mSos1 for Grb2 and of either Grb2 or Grb2-mSos1 for phosphotyrosine-containing peptides. mSos1 bound Grb2 with a KD of 0.4 microM; the stoichiometry of the Grb2-mSos1 complex was 1:1. An EGFR-derived phosphopeptide bound Grb2 with a KD of 0.7 microM, whereas the Shc-derived phosphopeptide bound Grb2 with a KD of 0.2 microM. Since Grb2 exists in a stable complex with mSos1, and both proteins can exist in a constitutive complex in unstimulated cells, we performed phosphopeptide binding studies on the Grb2-mSos1 complex to gain a better understanding of binding events in the intact cell. Grb2-mSos1 bound to both EGFR- and Shc-derived phosphopeptides with higher affinities (KD of 0.3 microM and 31 nM, respectively) than Grb2 alone. These findings suggest that the proximity of mSos1 to Grb2 in the complex can influence the interactions of the Grb2 SH2 domain with phosphopeptides and raise the possibility that in the Grb2-mSos1 complex the SH2 and SH3 domains of Grb2 are not independent of each other but may be indirectly linked by mSos1.

Adaptor Proteins, Signal Transducing↗
PubMed1996

Disulfide bond engineering to monitor conformational opening of apolipophorin III during lipid binding.

Apolipophorin III (apoLp-III) from the Sphinx moth, Manduca sexta, is an exchangeable, amphipathic apolipoprotein that alternately exists in water-soluble and lipid-bound forms. It is organized as a five-helix bundle in solution, which has been postulated to open at putative hinge domains to expose the hydrophobic interior, thereby facilitating interaction with the lipoprotein surface (Breiter, D. R. , Kanost, M. R., Benning, M. M., Wesenberg, G., Law, J. H., Wells, M. A., Rayment, I., and Holden, H. M. (1991) Biochemistry 30, 603-608). To test this hypothesis, we engineered two cysteine residues in apoLp-III, which otherwise lacks cysteine, by site-directed mutagenesis at Asn-40 and Leu-90. Under oxidizing conditions the two cysteines spontaneously form a disulfide bond, which should tether the helix bundle and thereby prevent opening and concomitant lipid interaction. N40C/L90C apoLp-III was overexpressed in Escherichia coli and characterized for disulfide bond formation, secondary structure content, and stability, under both oxidizing and reducing conditions. Functional characterization was carried out by comparing the abilities of the oxidized and reduced protein to associate with modified lipoproteins in vitro. While the reduced form behaved like wild type apoLp-III, the oxidized form was unable to associate with lipoproteins. These results suggest that opening of the helix bundle is required for interaction with lipoproteins and provide a molecular basis for the dual existence of water-soluble and lipid-bound forms of apoLp-III. However, in phospholipid bilayer association assays, wild type, reduced, and oxidized N40C/L90C apoLp-III exhibited similar abilities to transform dimyristoylphosphatidylcholine multilamellar vesicles to disc-like complexes, as judged by electron microscopy. These data emphasize that underlying differences exist in initiating or maintaining a stable interaction of apoLp-III with phospholipid disc complexes versus spherical lipoprotein surfaces.

Animals↗
PubMed1996

Modulation of structure and antibacterial and hemolytic activity by ring size in cyclic gramicidin S analogs.

We have evaluated the effect of ring size of gramicidin S analogs on secondary structure, lipid binding, lipid disruption, antibacterial and hemolytic activity. Cyclic analogs with ring sizes ranging from 4 to 14 residues were designed to maintain the amphipathic character as found in gramicidin S and synthesized by solid phase peptide synthesis. The secondary structure of these peptides showed a definite periodicity in beta-sheet content, with rings containing 6, 10, and 14 residues exhibiting beta-sheet structure, and rings containing 8 or 12 residues being largely disordered. Peptides containing 4 or 6 residues did not bind lipopolysaccharide, whereas longer peptides showed a trend of increasing binding affinity for lipopolysaccharide with increasing length. Destabilization of Escherichia coli outer membranes was only observed in peptides containing 10 or more residues. Peptides containing fewer than 10 residues were completely inactive and exhibited no hemolytic activity. The 10-residue peptide showed an activity profile similar to that of gramicidin S itself, with activity against Gram-positive and Gram-negative microorganisms as well as yeast, but also showed high hemolytic activity. Differential activities were obtained by increasing the size of the ring to either 12 or 14 residues. The 14-residue peptide showed no antibiotic activity but exhibited increased hemolytic activity. The 12-residue peptide lost activity against Gram-positive bacteria, retained activity against Gram-negative microorganisms and yeast, but displayed decreased hemolytic activity. Biological activities in the 12-residue peptide were optimized by a series of substitutions in residues comprising both hydrophobic and basic sites resulting in a peptide that exhibited activities comparable with gramicidin S against Gram-negative microorganisms and yeast but with substantially lower hemolytic activity. Compared with gramicidin S, the best analog showed a 10-fold improvement in antibiotic specificity for Gram-negative microorganisms and a 7-fold improvement in specificity for yeast over human erythrocytes as determined by a therapeutic index. These results indicate that it is possible to modulate structure and activities of cyclic gramicidin S analogs by varying ring sizes and further show the potential for developing clinically useful antibiotics based on gramicidin S.

Amino Acid Sequence↗
PubMed1996

Fluorescence studies of lipid association-induced conformational adaptations of an exchangeable amphipathic apolipoprotein.

The conformational adaptability of Manduca sexta apolipophorin III (apoLp-III) has been evaluated by monitoring the spectroscopic properties of its sole tyrosine residue, Tyr145, present in the fifth helical segment of the protein. M. sexta apoLp-III adopts a globular five-helix bundle structure in solution and has been postulated to undergo an opening at putative hinge domains upon interaction with lipid surfaces. Previous results have shown that the intrinsic fluorescence of Tyr145 is highly quenched in the closed, water-soluble conformation but is dramatically enhanced upon lipid association. We have carried out a spectroscopic characterization of Tyr145 and its microenvironment, to enable its use as a structural probe of lipid-induced conformational changes of apoLp-III. The pKa of Tyr145 in lipid-free apoLp-III was found to be 10.5, as determined from uv-spectrophotometry, indicating that, in the ground state, the tyrosyl phenolic group is not ionized under physiological conditions. Compared to free tyrosine in aqueous buffer (pH 7.0), a red shift (77 nm) in the (lambda)max of absorbance of Tyr145 was observed, suggesting that an H-bonding interaction is responsible for the quenched state of tyrosine fluorescence. In an effort to explain the observed quenching phenomenon, the quantum yield and lifetimes of Tyr145 fluorescence emission were investigated as a function of pH and lipid binding. The quantum yield of Tyr145 in lipid-free apoLp-III was enhanced fivefold upon decreasing the pH, with a half-maximal point around pH 5.5. Time-resolved fluorescence decay analysis showed that Tyr145 exhibits nonexponential emission decay with two components having lifetimes of 3.3 ns (76%) and 0.89 ns (24%) in the lipid-free state. The lifetime and amplitude of Tyr145 remain essentially unaltered upon lipid association or decreasing the pH. This is consistent with the hypothesis that, in the lipid-free helix bundle conformation, a quenching residue exists within H-bonding distance of the phenolic side chain of Tyr145 which, at physiological pH, is responsible for the observed fluorescence quenching. Opening of the helix bundle repositions this acceptor base, possibly a carboxylate or an imidazole side chain, making it unavailable for quenching. Using differential polarized phase and modulation fluorometry, it was seen that the segmental motion of Tyr145 is also altered considerably upon lipid interaction. These spectroscopic and motional properties of Tyr145 distinguish this unique residue as a useful probe to monitor structural flexibility of apoLp-III.

Animals↗
PubMed1996

Kinetic study on the formation of a de novo designed heterodimeric coiled-coil: use of surface plasmon resonance to monitor the association and dissociation of polypeptide chains.

The surface plasmon resonance (SPR) technique was used to study the formation kinetics of a de novo designed coiled-coil (E/K coil). The E/K coil is made up of two distinct peptides (E and K) each with five heptad (g-a-b-c-d-e-f) repeats. The E peptide's heptad sequence is E-V-S-A-L-E-K, and the K peptide's heptad sequence is K-V-S-A-L-K-E. A linker C-nL-G-G-G (nL = norleucine) is present at the C-terminus of the E peptide and at the N-terminus of the K peptide for the SPR studies. Heterodimer formation involves both electrostatic and hydrophobic interactions at the dimer interface. Under conditions that favor the heterodimer formation, the CD signal ([theta]222) varied as a function of peptide concentration. The estimated dissociation constant (Kd) was 2.45 +/- 0.71 nM. Denaturation studies with guanidine-HCI (GdnHC11/2 = 3.9 M) suggested a value of 3.53 +/- 0.48 nM. For the SPR investigation, the peptides were biotinylated and linked to streptavidin in order to increase their effective molecular weight and consequently enhance the signal intensity. Biotinylation in itself did not impede coiled-coil formation based on CD measurements. The biosensor study revealed a slow dissociation rate constant for the heterodimer (kd approximately 2 x 10(-4) s-1) and a moderately fast association rate constant [ka approximately (4.27-4.53) x 10(5) M-1 s-1). This gives a calculated Kd of 0.47-0.50 nM, which agrees reasonably well with the equilibrium CD studies. Therefore, based on the SPR data, the preference for heterodimer formation is due to a combination of moderately fast association and slow dissociation rates.

Amino Acid Sequence↗
PubMed1996

Lactam bridge stabilization of alpha-helices: the role of hydrophobicity in controlling dimeric versus monomeric alpha-helices.

A series of lactam-bridged and linear 14 residue amphipathic alpha-helical peptides based on the sequence Ac-EXEALKKEXEALKK-amide were prepared in order to determine the effect of decreasing the hydrophobicity of the nonpolar face to helical content and stability. This was done by substituting position X by Ile, Val, and Ala. Lactam bridges spaced i to i + 4 were formed between the side chains of Glu3 and Lys7 and Glu10 and Lys14 while the linear noncyclized peptides could potentially form i to i + 4 salt bridges with the same residues. It was found that in all cases the lactam-bridged peptides were substantially more helical than the corresponding linear peptides as determined by CD spectroscopy. Moreover, the helical content approached 100% for the lactam-bridged peptides X = Ile and Ala and was greater than 80% for X = Val. For X = Ile and Val, this was partly due to the ability of the lactam bridges to enhance interchain interactions relative to the linear versions of the same sequence. Size-exclusion chromatography demonstrated that the Ile-based peptide associates as a dimer. The alanine-based lactam-bridged peptide was found to be monomeric as determined by concentration dependency studies and size-exclusion chromatography. Thermal denaturation studies in benign media indicated that the lactam-based peptides were very stable. The conformation of the Ala-based lactam peptide was further characterized by two-dimensional NMR spectroscopy and was found to be highly helical. The results demonstrate the ability of lactam bridges to stabilize the helical conformation and enhance dimerization of peptides based on a 3,4 hydrophobic heptad repeat. The substitution of Ala residues in the hydrophobic face of the alpha-helix can prevent dimerization and specify monomeric helical structure.

Amino Acid Sequence↗
PubMed1996

Formation of parallel and antiparallel coiled-coils controlled by the relative positions of alanine residues in the hydrophobic core.

The orientation of alpha-helical chains in two-stranded coiled-coils has been shown to be determined by the presence of favorable interchain electrostatic interactions. In this study, we used de novo designed 35-residue peptides to show that when interchain electrostatic interactions are not a factor in coiled-coil formation, the relative positions of Ala residues in the middle heptad can control the parallel or antiparallel orientation of alpha-helical chains in coiled-coils. The peptides formed four-stranded coiled-coils where the helices are either all-parallel or all-antiparallel with respect to their nearest neighbor. The common structural element in these four-stranded coiled-coils is an alternating pair of Ala and Leu residues (Ala-Leu-Ala-Leu) in each of the two planes in the middle heptad. These results indicate that both the relative positions of the Ala residues in the hydrophobic core and the interchain electrostatic interactions between charged residues in the e and g positions should be considered in designing coiled-coils with the desired number of strands in the multiple-stranded assembly. These design elements are also important in orienting functional groups or domains attached to the terminals ends of a coiled-coil carrier.

Alanine↗
PubMed1996

Ca(2+)-binding domain VI of rat calpain is a homodimer in solution: hydrodynamic, crystallization and preliminary X-ray diffraction studies.

The 21-kDa calcium-binding domain (VI) of the small subunit of rat calpain II has been expressed in Escherichia coli, purified, and crystallized. Two orthorhombic crystal forms have been obtained: space group P2(1)2(1)2(1) with a = 50.3, b = 56.5, c = 141.3 A; and space group C222(1) with a = 69.4, b = 73.9, c = 157.4 A. Diffraction data have been collected to 2.4 A. Sedimentation equilibrium, dynamic light scattering, and gel-permeation chromatography indicate that domain VI exists as a homodimer in solution. In accordance with the protein's behavior in solution, each crystal form contains two molecules per asymmetric unit. Screening for heavy-atom derivatives is in progress. To decrease the sensitivity to mercurials and to aid in the search for useful derivatives, Cys-to-Ser mutants have been prepared, expressed, and crystallized.

Animals↗
PubMed1996

A natural variant of type I antifreeze protein with four ice-binding repeats is a particularly potent antifreeze.

A 4.3-kDa variant of Type I antifreeze protein (AFP9) was purified from winter flounder serum by size exclusion chromatography and reversed-phase HPLC. By the criteria of mass, amino acid composition, and N-terminal sequences of tryptic peptides, this variant is the posttranslationally modified product of the previously characterized AFP gene 21a. It has 52 amino acids and contains four 11-amino acid repeats, one more than the major serum AFP components. The larger protein is completely alpha-helical at 0 degree C, with a melting temperature of 18 degrees C. It is considerably more active as an antifreeze than the three-repeat winter flounder AFP and the four-repeat yellowtail flounder AFP, both on a molar and a mg/mL basis. Several structural features of the four-repeat winter flounder AFP, including its larger size, additional ice-binding residues, and differences in ice-binding motifs might contribute to its greater activity. Its abundance in flounder serum, together with its potency as an antifreeze, suggest that AFP9 makes a significant contribution to the overall freezing point depression of the host.

Amino Acid Sequence↗
PubMed1996

1H, 15N and 13C resonance assignments and monomeric structure of the amino-terminal extracellular domain of epithelial cadherin.

E-cadherin is a transmembrane protein that provides Ca(2+)-dependent cell adhesion to epithelial cells. The large majority of the 1H, 15N, 13C and 13CO resonances of a 146-amino acid polypeptide from epithelial (E-) cadherin have been assigned using multidimensional NMR spectroscopy. The structure of the amino-terminal 100 amino acids, corresponding to the first extracellular repeat of E-cadherin [Overduin et al. (1995) Science, 267, 386-389], has been refined. The monomeric state of this isolated domain is demonstrated by light scattering and sedimentation analysis. Seven beta-strands and two short helices were identified by patterns of NOE cross-peaks, vicinal coupling constants and chemical shift indices. A novel structural motif termed a quasi-beta-helix found in the crystal structure of a neural (N-) cadherin domain [Shapiro et al. (1995) Nature, 374, 327-337] is characterized in detail for the first time by NMR. Slowly exchanging amides were concentrated in the beta-sheet region and quasi-beta-helix. The beta-barrel fold of the cadherin domain is topologically similar to the immunoglobulin fold. Comparison of this solution structure to the crystallized dimers of the N-terminal pair of E-cadherin domains [Nagar et al. (1996) Nature, 380, 360-364] and of the homologous single domain of N-cadherin reveals a conserved cadherin fold with minor structural differences, which can be accounted for by differences in metal ligation and oligomeric state.

Amino Acid Sequence↗
PubMed1996

The relative positions of alanine residues in the hydrophobic core control the formation of two-stranded or four-stranded alpha-helical coiled-coils.

The objective of this study was to investigate the positional effect of hydrophobic interactions in the alpha-helical interface in controlling the formation of two-stranded and four-stranded coiled-coils. Two disulfide-bridged antiparallel coiled-coils were designed which differ only in the position of a single Ala residue in the middle heptad: in peptide 2H the Ala residues are in register (in the same rung), while in peptide 4H they are not. Data from size-exclusion chromatography and sedimentation equilibrium experiments showed that under benign conditions peptides 2H and 4H were two-stranded and four-stranded coiled-coils respectively. These results, in conjunction with molecular modeling studies, suggests that when four Ala residues are in the same plane of a potential four-stranded coiled-coil, the small side chains of Ala would create a large cavity in the hydrophobic interface of the potential four-stranded structure which is destabilizing and favors the two-stranded, disulfide-bridged coiled-coil. In contrast, an alternating Leu-Ala hydrophobic packing in the two planes distributes the potential cavity over a larger region, which may be partially filled by minor adjustments of the neighboring Leu side chains. As a result, there is still sufficient hydrophobic contact to maintain the four stranded structure.

Alanine↗
PubMed1996

The consequences of engineering an extra disulfide bond in the Penicillium camembertii mono- and diglyceride specific lipase.

The extracellular lipase from Penicillium camembertii has unique substrate specificity restricted to mono- and diglycerides. The enzyme is a member of a homologous family of lipases from filamentous fungi. Four of these proteins, from the fungi Rhizomucor miehei, Humicola lanuginosa, Rhizopus delemar and P. camembertii, have had their structures elucidated by X-ray crystallography. In spite of pronounced sequence similarities the enzymes exhibit significant differences. For example, the thermostability of the P. camembertii lipase is considerably lower than that of the H. lanuginosa enzyme. Since only the P. camembertii enzyme lacks the characteristic long disulfide bridge, corresponding to Cys22-Cys268 in the H. lanuginosa lipase, we have engineered this disulfide into the former enzyme in the hope of obtaining a significantly more stable fold. The properties of the double mutant (Y22C and G269C) were assessed by a variety of biophysical techniques. The extra disulfide link was found to increase the melting temperature of the protein from 51 to 63 degrees C. However, no difference is observed under reducing conditions, indicating an intrinsic instability of the new disulfide. The optimal temperature for catalytic activity decreased by 10 degrees C and the optimum pH was shifted by 0.7 units to more acidic.

Base Sequence↗
PubMed1995

Preferential heterodimeric parallel coiled-coil formation by synthetic Max and c-Myc leucine zippers: a description of putative electrostatic interactions responsible for the specificity of heterodimerization.

The oncoprotein c-Myc must heterodimerize with Max to bind DNA and perform its oncogenic activity. The c-Myc-Max heterodimer binds DNA through a basic helix-loop-helix leucine zipper (b-HLH-zip) motif and it is proposed that leucine zipper domains could, in concert with the HLH regions, provide the specificity and stability of the b-HLH-zip motif. In this context, we have synthesized the peptides corresponding to the leucine zipper domains of Max and c-Myc with a N-terminal Cys-Gly-Gly linker and studied their dimerization behavior using reversed-phase HPLC and CD spectroscopy. The preferential formation of a fully helical parallel c-Myc-Max heterodimeric coiled-coil was observed under air-oxidation and redox conditions at neutral pH. We show that the stability and the helicity of the disulfide-linked c-Myc-Max heterostranded coiled-coil is modulated by pH, with a maximum around pH 4.5, supporting the existence of stabilizing and specific interhelical electrostatic interactions. We present a molecular model of the c-Myc-Max heterostranded coiled-coil describing potential electrostatic interactions responsible for the specificity of the interaction, the main feature being putative buried electrostatic interactions between a histidine side-chain (in the Max leucine zipper) and two glutamic acid side-chains (in the c-Myc leucine zipper) at the heterodimer interface. This model is supported by the fact that the apparent pKa (as determined by [1H]-NMR spectroscopy) of this histidine side-chain at 25 degrees C is 0.42 (+/- 0.05) pKa units higher in the folded form than in the unfolded form. This indicates that the charged histidine side-chain contributes approximately 0.57 (+/- 0.07) kcal/mol (2.38 (+/- 0.30) kJ/mol) of stabilization free energy to the c-Myc-Max heterostranded coiled-coil through favorable electrostatic interaction.

Amino Acid Sequence↗
PubMed1995

The effects of interhelical electrostatic repulsions between glutamic acid residues in controlling the dimerization and stability of two-stranded alpha-helical coiled-coils.

The effects of interhelical electrostatic repulsions in controlling the dimerization and stability of two-stranded alpha-helical coiled-coils have been studied using de novo designed synthetic coiled-coils. A native coiled-coil was snythesized, which consisted of two identical 35-residue polypeptide chains with a heptad repeat QgVaGbAcLdQeKf and a Cys residue at position 2 to allow formation of an interchain 2-2' disulfide bridge. This peptide, designed to contain no intrachain or interchain electrostatic interactions, forms a stable coiled-coil structure at 20 degrees C in benign medium (50 mM KCl, 25 mM PO4, pH 7) with a [urea]1/2 value of 6.1 M. Five mutant coiled-coils were designed in which Gln residues at the e and g positions of the heptad repeat were substituted with Glu systematically from the N terminus toward the C terminus, resulting in each polypeptide chain having 2, 4, 6, 8, or 10 Glu residues. These substituted Glu residues are able to form interchain i to i' +5 electrostatic repulsions across the dimer interface. As the number of interchain repulsions increases, a steady loss of helical content is observed by circular dichroism spectroscopy. The effects of the interchain Glu-Glu repulsions on the coiled-coil structure are partly overcome by the presence of an interchain disulfide bridge; the peptide with six Glu substitutions is only 15% helical in the reduced form but 85% helical in the oxidized form. The stabilities of the coiled-coils were determined by urea and guanidine hydrochloride (GdnHCl) denaturation studies at 20 degrees C. The stabilities of the coiled-coils determined by urea denaturation indicate a decrease in stability, which correlates with an increasing number of interchain repulsions ([urea]1/2 values ranging from 8.4 to 3.7 M in the presence of M KCl). In contrast, all coiled-coils had similar stabilities when determined by GdnHCl denaturation (approximately 2.9 M). KCl could not effectively screen the effects of interchain repulsions on coiled-coil stability as compared to GdnHCl.

Amino Acid Sequence↗
PubMed1995

Spectroscopic and lipid binding studies on the amino and carboxyl terminal fragments of Locusta migratoria apolipophorin III.

The structural basis for the lipid binding capability of Locusta migratoria apolipophorin III (apoLp-III) was assessed by characterizing the amino and carboxyl terminal halves of the protein. The native molecule (approximately 20 kDa) was deglycosylated with endoglycosidase F (molecular mass of deglycosylated species approximately 18 kDa) and cleaved with endoproteinase Arg-C to yield two fragments with molecular masses of approximately 9 kDa each. The two fragments were purified by reversed-phase HPLC and identified by mass spectrometry, amino acid analysis and N-terminal sequencing as the amino terminal (N9) and carboxyl terminal (C9) halves. Due to the apparent discrepancy of the protease digestion pattern obtained compared to that expected from the deduced amino sequence of apoLp-III cDNA, we carried out partial amino acid sequencing of the fragments and cDNA sequencing for the entire protein. Circular dichroism spectroscopy of the N9 and C9 peptides revealed that both exist in buffer in a random coil state. However, addition of trifluoroethanol, a helix-inducing agent, resulted in the formation of an alpha-helix, reflecting an innate propensity of the peptides to adopt a helical conformation. When cosonicated with dimyristoylphosphatidylcholine (DMPC) both peptides assumed an alpha-helical conformation, indicative of interaction with the phospholipid. In the presence of phospholipids, a 22 nm blue shift in Trp fluorescence emission was observed in the case of the C9 peptide, suggesting that the Trp residues are located in a more hydrophobic environment. Electron microscopy revealed that, compared to native apoLp-III, both peptides possessed a reduced ability to transform DMPC vesicles to disklike complexes.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗
PubMed1995

Influence of caltropin on the caldesmon induced polymerization of G-actin.

The effect of caltropin (CaT) on the caldesmon (CaD)-G-actin interaction was monitored by viscosity measurements, bioassays measuring the release of inorganic phosphate (Pi) following G-actin polymerization and fluorescence studies using acrylodan labelled G-actin. CaD induced polymerization of G-actin into filaments in the absence of salt was accompanied by an increase in relative viscosity. This effect of CaD was essentially abolished by CaT in the presence of Ca2+. In bioassays the rate of Pi release was reduced significantly in the presence of Ca2+/CaT. Acrylodan labelled G-actin when excited at 375 nm exhibited an emission maximum at 478 nm. Polymerization of G-actin resulted in shifting the emission maximum to 465 nm. When CaD was added to G-actin containing Ca2+/CaT, the rate of G-actin polymerization was reduced considerably, suggesting that CaT interferes in the CaD-G-actin interaction.

Actins↗