Biomedical subjects

C Maul

Publications and source records attributed to C Maul.

8 recordsLinked to original sources

PubMed2006

Intermediate state polarization in multiphoton ionization of HCl.

The paper presents the detailed theoretical description of the intermediate state polarization and photofragment angular distribution in resonance enhanced multiphoton ionization (REMPI) of molecules and the experimental investigation of these effects in the E(1)Sigma(+) and V(1)Sigma(+) states of HCl populated by two-photon transitions. It is shown that the intermediate state polarization can be characterized by the universal parameter b which is in general a complex number containing information about the symmetry of the two-photon excitation and possible phase shifts. The photofragment angular distribution produced by one- or multiphoton excitation of the polarized intermediate state is presented as a product of the intermediate state axis spatial distribution and the angular distribution of the photofragments from an unpolarized intermediate state. Experiments have been carried out by two complementary methods: REMPI absorption spectroscopy of rotationally resolved (E,v'=0<--X,v"=0) and (V,v'=12<--X,v"=0) transitions and REMPI via the Q(0) and Q(1) rotational transitions followed by three-dimensional ion imaging detection. The values of the parameter b determined from experiment manifest the mostly perpendicular nature of the initial two-photon transition. The experimentally obtained H(+) -ion fragment angular distributions produced via the Q(1) rotational transition show good agreement with theoretical prediction.

Journal Article↗

PubMed2006

Photoionization and photodissociation of HCl(B 1Sigma+, J=0) near 236 and 239 nm using three-dimensional ion imaging.

The electronically excited states HCl(*)(E,upsilon(')=0,J(')=0) and HCl(*)(V,upsilon(')=12,J(')=0) have been prepared by two-photon resonant absorption of ground state HCl via Q(0) transitions at 238.719 and at 236.000 nm, respectively. The consequent one-or two-photon excitation at the same wavelength results in the production of H(+), Cl(+), and HCl(+) ions. The speed distributions and anisotropy parameters beta for these ions have been determined by three-dimensional photo-fragment ion imaging based on a position-sensitive delay-line anode assembly. Several results are presented: first, we measured velocity (speed and angle) distributions for HCl(+) due to the electron recoil in the photoionization of HCl(*). Such distributions give information on the photoionization process and on the vibrational distribution of HCl(+) after the laser pulse. Second, the measured beta parameters for Cl(+) and H(+) distributions give information on the symmetries of the upper states in the one-photon photoexcitation of HCl(*). Third, the measured speed distributions for H(+) help to understand the mechanism of the photodissociation of HCl(+) ions.

Journal Article↗

PubMed2000

A system to reproduce human breathing patterns: its development and validation.

Studies of aerosol deposition in models of the human respiratory tract play a significant role in developing our understanding of drug delivery by inhalation and particle retention in the lungs during exposure to polluted environments. To use replica casts of human airways and compare the results with in vivo data, a device is required to simulate human breathing. The objective of this study was to simulate human breathing for nasal casts. Breathing through the nose is normally limited to about 50 L/min. Therefore, a system was built to simulate human breathing patterns as well as artificial ones up to this flow rate. The system consists of a reciprocating piston in a cylinder, which is displaced by a synchronous motor via a linear actuator. The desired signal to drive the motor is given in real time by purpose-written software. The rotation and position of the motor are controlled by an electronic position control unit. The validation of the system shows that it simulates breathing up to 50 L/min closely even for complex waveforms. At breathing rates above 50 L/min, a slight difference is apparent between the desired breathing pattern and the simulated one. The breathing simulator has been shown to be a reliable tool for reproducing a wide variety of breathing patterns.

Aerosols↗

PubMed1999

Biomolecular-chemical screening: a novel screening approach for the discovery of biologically active secondary metabolites. III. New DNA-binding metabolites.

Based on the chemical screening technique, biomolecular-chemical screening has been developed which makes use of two-dimensional TLC analysis of microbial extracts and combines thin-layer chromatography (RP-18) with binding studies towards DNA. In the first dimension the metabolites of the crude microbial extract are separated, and in the second dimension binding properties towards DNA are analysed. An initial screening program with 500 microbial extracts prepared by solid-phase extraction with XAD-16 resin resulted in 17 samples which contained metabolites with significant DNA-binding behavior. Fermentation, isolation and structural characterization led to already known metabolites [phenazine-1,6-dicarboxylate (1), phencomycin (2), 11-carboxy-menoxymycin B (3), soyasaponine I (4), and (8S)-3-(2-hydroxypropyl)-cyclohexanone (5)], as well as to new secondary metabolites. Fermentation of the producing organisms of the new DNA-binding metabolites, ent-8,8adihydro-ramulosin (6). (2R,4R)-4-hydroxy-2-(1,3-pentadienyl)-piperidine (7), (5R)-dihydro-5-pentyl-4'-methyl-4'-hydroxy-2(3H)-furanone (8), and seco-4,23-hydroxyoleane-12-en-22-one-3-carboxylic acid (9), as well as isolation, structural characterization, and physico-chemical properties are reported.

Chromatography, Thin Layer↗

PubMed1999

Biomolecular-chemical screening: a novel screening approach for the discovery of biologically active secondary metabolites. I. Screening strategy and validation.

Chemical screening using thin-layer chromatography and various staining reagents offers the opportunity to visualize an almost complete picture of a microbial secondary metabolite pattern (metabolic finger-print). A thorough application of this strategy resulted in a number of biologically active new secondary metabolites, although the screening strategy is per se not correlated to any biological activity. In the present paper we report on a novel approach called biomolecular-chemical screening which combines the chemical screening strategy with binding studies of biological relevance. Making use of thin-layer chromatography (TLC) and subsequent staining, biomolecular-chemical screening allows to examine binding properties of low molecular weight metabolites to certain bio-macromolecules. The screening strategy itself, as well as independent validation of the results using DNA as selected bio-macromolecule are presented. The biomolecular-chemical screening method is useful to screen binding behaviour towards DNA of both, pure metabolites by one-dimensional TLC, and crude extracts by two-dimensional TLC. Investigation of pure secondary metabolites as well as screening of crude microbial extracts and new secondary metabolites obtained with this screening strategy are presented in accompanying papers.

Bacteria↗

PubMed1999

Biomolecular-chemical screening: a novel screening approach for the discovery of biologically active secondary metabolites. II. Application studies with pure metabolites.

The novel screening strategy called "biomolecular-chemical screening" combines the advantages of the chemical screening approach--the analysis of the chromatographic and chemical behaviour of secondary metabolites on TLC plates--with binding studies of these molecules with bio-macromolecules like DNA. This approach was advantageously used to detect the interaction of pure compounds with DNA. In order to prove the reliability of the biomolecular-chemical screening and to examine DNA-binding properties, 470 pure secondary metabolites were analysed by this method. Besides the confirmation of already known binders with the TLC-based method, for a number of natural products DNA-binding properties were discovered for the first time. In consequence, binding of pure compounds can be measured by 1D TLC in a reliable and easy manner, in which DNA is applied together with the test compound at the starting spot. Analysis is performed via differences in Rf-values in comparison to a reference chromatogram without DNA.

Bacteria↗

PubMed1997

Label-free monitoring of DNA-ligand interactions.

We report on the label- and isotope-free monitoring of DNA interactions with low-molecular-weight ligands. An optical technique based on interference at thin layers was used to monitor in real time binding of ligands at DNA which was immobilized by Coulomb interactions at a positively charged surface. Approximately 2 ng DNA/m2 was irreversibly bound to the surface, which remained stable over several days. This result was confirmed by characterization of the layer using spectroscopic ellipsometry. During incubation of immobilized DNA with a variety of intercalators and other DNA-binding compounds in a flow system, interactions were monitored by reflectometric interference spectroscopy. Binding effects between 10 and 400 pg/ mm2 were detected unambiguously. Nonspecific binding effects were excluded by using a negatively charged reference surface. Variation of intercalator concentration allowed the characterization of interaction with respect to kinetics and thermodynamics by the evaluation of binding rate and equilibrium coverage. The affinity constants were determined in the range between 10(5) and 10(6) M-1, in good agreement to those obtained by homogeneous phase assays. Association rate constants between 10(3) and 10(5) M-1 s-1 and dissociation rate constants between 10(-1) and 10(-2) s-1 were determined by evaluation of the binding curves. Both the fast and simple test format and a universal applicability make the new technique described attractive for detecting and characterizing interaction of low-molecular-weight molecules with DNA.

DNA↗

PubMed1997

Specific binding of low molecular weight ligands with direct optical detection.

The characterization of low molecular weight ligand interaction with receptor molecules is of importance for the investigation of biological processes and for drug research. We report on the investigation of the binding of low molecular weight ligands to immobilized receptors by label-free detection. Reflectometric interference spectroscopy, an optical transducer which allows the monitoring of a few picograms per square millimetre changes in surface coverage, was used to study two model systems. In both cases detection of the binding event was successful. High affinity binding of biotin to immobilized streptavidin was clearly detectable at receptor surface concentrations as low as 1-2 x 10(10) binding sites/mm2. Linear correlation between the receptor surface concentration and the response to biotin binding was observed. Using immobilized DNA, we investigated the binding of common intercalators with respect to kinetics and thermodynamics by evaluation of the association and the dissociation part of the binding curve. Bi-exponential increase and decrease of intercalator loading was observed, indicating complex interaction kinetics. The four structurally different intercalators showed significant distinction in binding kinetics and equilibrium signals. Improvement of experimental parameters is required to obtain more reliable kinetic data.

Adsorption↗