PubMed Health⌕ Search

Biomedical subjects

C Russell Middaugh

Publications and source records attributed to C Russell Middaugh.

At least 37 records · Page 2Linked to original sources

Biophysical characterization of polymeric and liposomal gene delivery systems using empirical phase diagrams.

A major problem with the pharmaceutical use of nonviral gene delivery systems arises from their limited characterization due to their size and heterogeneity. In this study, we provide a more intuitive view of their structure and behavior employing an empirically based phase diagram approach. Complexes formed between plasmid DNA and four cationic carriers (a monovalent lipid, the same monovalent lipid combined with a helper lipid, polylysine, and a branched form of polyethyleneimine), at both positive and negative nitrogen/phosphorous ratios, are characterized employing dynamic light scattering, circular dichroism, and extrinsic dye fluorescence as methods sensitive to various aspects of the structure of the complexes. These measurements were performed as a function of pH and ionic strength to perturb the electrostatic contacts that are key to complex formation. Using a multidimensional eigenvalue approach, the data are presented in the form of a colored, five dimensional diagram. The resultant eight empirical phase diagrams display three to five variably resolved phases. In contrast, the phase diagram of the plasmid alone showed only two to three such phases. Each state is assigned to a particular form of the complex in terms of their size, extent of collapse and conformation of the associated DNA component. The utility of this approach is then briefly discussed.

Biophysical Phenomena↗

Physical characterization of MxiH and PrgI, the needle component of the type III secretion apparatus from Shigella and Salmonella.

Shigella and Salmonella use similar type III secretion systems for delivering effector proteins into host cells. This secretion system consists of a base anchored in both bacterial membranes and an extracellular "needle" that forms a rod-like structure exposed on the pathogen surface. The needle is composed of multiple subunits of a single protein and makes direct contact with host cells to facilitate protein delivery. The proteins that make up the needle of Shigella and Salmonella are MxiH and PrgI, respectively. These proteins are attractive vaccine candidates because of their essential role in virulence and surface exposure. We therefore isolated, purified, and characterized the monomeric forms of MxiH and PrgI. Their far-UV circular dichroism spectra show structural similarities with hints of subtle differences in their secondary structure. Both proteins are highly helical and thermally unstable, with PrgI having a midpoint of thermal unfolding (Tm) near 37 degrees C and MxiH having a value near 42 degrees C. The two proteins also have comparable intrinsic stabilities as measured by chemically induced (urea) unfolding. MxiH, however, with a free energy of unfolding (DeltaG degrees 0,un) of 1.6 kcal/mol, is slightly more stable than PrgI (1.2 kcal/mol). The relatively low m-values obtained for the urea-induced unfolding of the proteins suggest that they undergo only a small change in solvent-accessible surface area. This argues that when MxiH and PrgI are incorporated into the needle complex, they obtain a more stable structural state through the introduction of protein-protein interactions.

Amino Acid Sequence↗

IpaD localizes to the tip of the type III secretion system needle of Shigella flexneri.

Shigella flexneri, the causative agent of shigellosis, is a gram-negative bacterial pathogen that initiates infection by invading cells within the colonic epithelium. Contact with host cell surfaces induces a rapid burst of protein secretion via the Shigella type III secretion system (TTSS). The first proteins secreted are IpaD, IpaB, and IpaC, with IpaB and IpaC being inserted into the host cell membrane to form a pore for translocating late effectors into the target cell cytoplasm. The resulting pathogen-host cross talk results in localized actin polymerization, membrane ruffling, and, ultimately, pathogen entry. IpaD is essential for host cell invasion, but its role in this process is just now coming to light. IpaD is a multifunctional protein that controls the secretion and presentation of IpaB and IpaC at the pathogen-host interface. We show here that antibodies recognizing the surface-exposed N terminus of IpaD neutralize Shigella's ability to promote pore formation in erythrocyte membranes. We further show that MxiH and IpaD colocalize on the bacterial surface. When TTSS needles were sheared from the Shigella surface, IpaD was found at only the needle tips. Consistent with this, IpaD localized to the exposed tips of needles that were still attached to the bacterium. Molecular analyses then showed that the IpaD C terminus is required for this surface localization and function. Furthermore, mutations that prevent IpaD surface localization also eliminate all IpaD-related functions. Thus, this study demonstrates that IpaD localizes to the TTSA needle tip, where it functions to control the secretion and proper insertion of translocators into host cell membranes.

Animals↗

A stopped-flow kinetic study of the assembly of nonviral gene delivery complexes.

Stopped-flow circular dichroism and fluorescence spectroscopy are used to characterize the assembly of complexes consisting of plasmid DNA bound to the cationic lipids dimethyldioctadecylammonium bromide and 1, 2-dioleoyl- 3-trimethylammonium-propane and a series of polyamidoamine dendrimers. The kinetics of complexation determined from the stopped-flow circular dichroism measurements suggests complexation occurs within 50 ms. Further analysis, however, was precluded by the presence of mixing (shear) artifacts. Stopped-flow fluorescence employing the high-affinity DNA dyes Hoechst 33258 and YOYO-1 was able to resolve two sequential steps in the assembly of complexes that are assigned to binding/dehydration and condensation events. The rates of each process were determined over the temperature range of 10-50 degrees C and activation energies were determined from the slope of Arrhenius plots. The behavior of polyamidoamine dendrimers can be separated into two classes based on their differing binding modes: generation 2 and the larger generations (G4, G7, and G9). The larger generations have activation energies for binding that follow the trend G4 > G7 > G9. The activation energies for condensation (compaction) of complexes composed of these same dendrimers have the opposite trend G9 > G7 > G4. It is postulated that a balance between a more energetically favorable condensation and less favorable binding may prove beneficial in enhancing gene delivery.

Benzoxazoles↗

Effects of adsorption to aluminum salt adjuvants on the structure and stability of model protein antigens.

The effect of adsorption onto aluminum salt adjuvants on the structure and stability of three model protein antigens was studied using fluorescence and Fourier transform infrared spectroscopies, as well as isothermal titration and differential scanning calorimetric techniques. Lysozyme was preferentially adsorbed to aluminum phosphate (Adju-Phos), whereas ovalbumin and bovine serum albumin were better adsorbed to aluminum hydroxide (Alhydrogel). A linearized Langmuir adsorption isotherm was used to obtain information regarding the binding interactions between proteins and adjuvants. Binding energetics and stoichiometry data obtained from isothermal titration calorimetry measurements were complex. Based on the spectroscopic and differential scanning calorimetry studies, the structure of all three proteins, when adsorbed to the surface of an aluminum salt, was altered in such a way as to render the proteins less thermally stable. Besides the pharmaceutical significance of this destabilization, we consider the possibility that this phenomenon may facilitate the presentation of antigens and thus contribute to the adjuvant activity of the aluminum salts.

Adjuvants, Immunologic↗

Structure/function relationships of polyamidoamine/DNA dendrimers as gene delivery vehicles.

PAMAM dendrimers are members of a class of polyamine polymers that demonstrate significant gene delivery ability. In this study, a selection of PAMAM dendrimers, spanning a range of sizes (generations 2, 4, 7, and 9) and transfection efficiencies, are characterized by various biophysical methods to search for structural properties that correlate with transfection. Measurements of colloidal properties (size and zeta potential) as a function of charge ratio reveal that highly transfecting dendrimer/DNA complexes have size/zeta potential values between 4 and 8. Circular dichroism (CD) and FTIR spectroscopy of complexes confirm the DNA component remains in B form when associated with all dendrimer generations up to a 5:1 charge ratio (+/-). Isothermal titration calorimetry and differential scanning calorimetry detect changes that are related to polymer structure and charge ratio but do not directly correlate with transfection efficiency. Despite DNA structural and stability changes detected by CD, FTIR, DSC, and ITC that are similar to those seen with other cationic delivery vehicles [e.g., cationic lipids, peptoids/lipitoids, peptides, polyethyleneimines (PEIs), etc.], clear correlations with transfection activity are not readily apparent. This may be due, at least in part, to the heterogeneity of the complexes.

Animals↗

Silicone oil induced aggregation of proteins.

Prior to delivery to the patient, protein pharmaceuticals often come in contact with a variety of surfaces (e.g., syringes and stoppers), which are treated to facilitate processing or to inhibit protein binding. One such coating, silicone oil, has previously been implicated in the induction of protein aggregation. We have investigated the propensity of model proteins to aggregate when silicone oil is present in solution and find significant induction of aggregation in four proteins of various molecular weights and isoelectric points in the presence of 0.5% oil. The ability of silicone oil to induce conformational changes that might be responsible for this aggregation was also examined by a combination of circular dichroism (CD) and derivative UV spectroscopy. Neither method produces evidence of large conformational changes or alterations in thermal stability although in a limited number of cases some small changes suggest the possibility of minor structural alterations. The most probable explanation for silicone oil induced aggregation is that the oil has direct effects on intermolecular interactions responsible for protein association through interaction with protein surfaces or indirectly through effects on the solvent.

Circular Dichroism↗

Lipid binding region (2303-2332) is involved in aggregation of recombinant human FVIII (rFVIII).

Factor VIII (FVIII) is a multi-domain protein that is important in the clotting cascade. Its deficiency causes Hemophilia A, a bleeding disorder. The unfolding of protein domains can lead to physical instability such as aggregation, and hinder their use in replacement therapy. It has been shown that the aggregation of rFVIIII is initiated by small fluctuations in the protein's tertiary structure (Grillo et al., 2001, Biochemistry 40:586-595). We have investigated the domain(s) involved in the initiation of aggregation using circular dichroism (CD), size exclusion chromatography (SEC), fluorescence anisotropy, domain specific antibody binding, and clotting activity studies. The studies indicated that aggregation may be initiated as a result of conformational change in the C2 domain encompassing the lipid-binding region (2303-2332). The presence of O-phospho-L-Serine (OPLS), which binds to the lipid-binding region of FVIII, prevented aggregation of the protein.

Binding Sites↗

Solution behavior of IFN-beta-1a: an empirical phase diagram based approach.

An empirical phase diagram approach has been developed as a practical tool to aid macromolecular preformulation/formulation studies. This method employs an eigenvector based procedure to visualize and interpret complex data sets. Human Inteferon-beta-1a, an important therapeutic protein, was used to further develop the method and test its utility. The protein was characterized in solution as a function of pH (2-8), temperature (10 degrees C-85 degrees C) and ionic strength (I = 0.1 and 1.0) using intrinsic and ANS fluorescence, Far-UV circular dichroism (Far-UV CD), Fourier Transform Infrared spectroscopy (FTIR) and derivative UV absorbance spectroscopies, as well as differential scanning calorimetry (DSC) to supplement spectroscopic thermal stability studies. Derivative UV absorbance data were initially used to construct a pH-temperature phase diagram at each ionic strength. Three distinctive phases at I = 0.1 and two major phases at I = 1.0 were identified corresponding to different conformation/aggregation states of the protein. For the first time, heterogeneous data sets (i.e., data from different techniques) including Far-UV CD, fluorescence and UV absorbance results were used to generate empirical phase diagrams. Results from different data sets are compared; precautions in applying the method and its overall utility are discussed.

Calorimetry, Differential Scanning↗

Aggregation kinetics of recombinant human FVIII (rFVIII).

The physical phenomenon of aggregation can have profound impact on the stability of therapeutic proteins. This study focuses on the aggregation behavior of recombinant human FVIII (rFVIII), a multi-domain protein used as the first line of therapy for hemophilia A, a bleeding disorder caused by the deficiency or dysfunction of factor VIII (FVIII). Thermal denaturation of rFVIII was investigated using circular dichroism (CD) spectroscopy and size exclusion chromatography (SEC). The dependence of unfolding on heating rate indicated that the thermal denaturation of the protein was at least partly under kinetic control. The data was interpreted in terms of a simple two-state kinetic model, N(Native) k --> A(Aggregated), where k is a first-order kinetic constant that changes with temperature, as given by the Arrhenius equation. Analysis of the data in terms of the above scheme suggested that under the experimental conditions used in this study, the rate-controlling step in the aggregation of rFVIII may be a unimolecular reaction involving conformational changes.

Animals↗

Spectroscopic analysis of highly concentrated suspensions of bovine somatotropin in sesame oil.

Spectroscopy was employed to analyze the structural and thermal stability of highly concentrated oil suspensions of bovine somatotropin (bST). These methods were then compared with more dilute aqueous solutions (1 and 10 mg/mL). All oil suspensions were opaque, viscous, and highly concentrated in bST (>300 mg/mL) and thus provided unique analytical challenges. Using front surface fluorescence and ATR-FTIR spectroscopy, protein structure and stability could be directly monitored in this environment. Differences were detected in structure between concentrated oil and dilute aqueous formulations. Fluorescence spectroscopy found that bST was highly thermally stabile within oil suspensions, since minimal changes in emission peak maxima and emission intensity were observed with increasing temperature when compared to dilute solutions. It was also observed that the amount of aggregate in a sample had some effect on the fluorescence spectra. As the amount of aggregated protein increased, the emission peak maximum and emission intensity changed. Employing ATR-FTIR, the secondary structure was examined with increasing temperature. The secondary structure of bST was also found to be very thermally stabile since no change in relative amount of helix/random structure is observed up to 70 degrees C while significant losses are observed in aqueous solution. This study demonstrates that conformational stability can be directly analyzed within highly concentrated, opaque environments using slight modifications of conventional methods.

Animals↗

Deamidation of model beta-turn cyclic peptides in the solid state.

To investigate the importance of secondary structure on peptide deamidation in the solid state, two cyclic beta-turn peptides and their linear analogs were used as models of Asn residues in structured and unstructured domains, and incorporated into poly(vinyl pyrrolidone) (PVP)-based lyophilized solids. The secondary structure of the model peptides was determined in solution and the solid state using a combination of nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD), and Fourier transform infrared (FTIR) spectroscopy. The model beta-turn cyclic peptides were found to be type II beta-turns while the linear analogs were determined to be predominantly unstructured. Quantitatively, the cyclic peptides consisted of approximately 80% beta-turn while the linear analogs contained only 30%-35% beta-turn. To characterize the solid environment, T(g), and moisture content of the solid-state formulations were determined. Accelerated stability studies were conducted in the solid state at 37 degrees C using formulations lyophilized from solutions at pH 8.8 (0.1 M borate buffer). The effect of matrix mobility on solid-state deamidation was investigated by altering the moisture content through variation of relative humidity or the addition of a plasticizer. Cyclic peptides degraded 1.2-8 times slower than the linear analogs under all of the conditions studied. The observed rate constants, however, for all of the peptides decreased dramatically (four orders of magnitude) in the glassy solids. This suggests the greater importance of matrix mobility in solid-state degradation. Molecular dynamics (MD) simulations were also performed to explore the low energy, preferred state of the peptides, and determine the structure around the beta-turn.

Amides↗

Analytical and biological characterization of supercoiled plasmids purified by various chromatographic techniques.

Supercoiled plasmids are an important component of gene-based delivery vehicles. A number of production methods for clinical applications have been developed, each resulting in very high-quality product with low levels of residual contaminants. There is, however, no consensus on the optimal methods to characterize plasmid quality, and further, to determine if these methods are predictive of either product stability or biological activity. We have produced two plasmids using four production purification methodologies based on PolyFlo and hydrophobic interaction chromatography (HIC), either alone or in tandem processes. In each case, the product was analyzed using standard molecular biological methods. We also performed a number of biophysical analyses such as dynamic light scattering (DLS), circular dichroism (CD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Minimal differences were detected among the preparations based on the more standard molecular biological methods. Some small differences were detected, however, using biophysical techniques, particularly FTIR and DSC, which may reflect small variations in plasmid tertiary structure and thermal stability. Stability after heat exposure at 60 degrees C, exposure to fetal bovine serum and long-term storage at 4 degrees C varied between plasmids. One plasmid showed no difference in stability depending on the production process, but the other showed significant differences. Evaluation in vivo in models for gene immunization and gene therapy showed significant differences in the response depending on the method of purification. Preparations using a tandem process of PolyFlo used in two separation modes provided higher biological activity compared to a tandem HIC/PolyFlo process or either resin used alone in a single column process. These data indicate that the process by which supercoiled plasmids are made can influence plasmid stability and biological activity and emphasize the need for more rigorous methods to evaluate supercoiled plasmids as gene-delivery vehicles.

Biophysical Phenomena↗

Polyanions and the proteome.

The behavior of the proteome reflects spatial and temporal organization both within and without cells. We propose that various macromolecular entities possessing polyanionic character such as proteoglycans, lipid bilayer surfaces, microtubules, microfilaments, and polynucleotides may provide a functional network that mediates a variety of cellular phenomena. The interaction of proteins with this array of polyanions is characterized by a lower degree of specificity than seen with most commonly recognized macromolecular interactions. In this commentary, potential roles for this polyanion network in diverse functions such as protein/protein interactions, protein folding and stabilization, macromolecular transport, and various disease processes are all considered, as well as the use of polyanions as therapeutic agents. The role of small polyanions in the regulation of protein/polyanion interactions is also postulated. We provide preliminary experimental analysis of the extent to which proteins interact with polyanions inside cells using a combination of two-dimensional chromatographic and electrophoretic methods and antibody arrays. We conclude that many hundreds to thousands of such interactions are present in cells and argue that future understanding of the proteome will require that the "polyanion world" be taken into account.

Animals↗

Compositional effects of cationic lipid/DNA delivery systems on transgene expression in cell culture.

Studies of the contribution of various physical properties of cationic lipid/DNA complexes (CLDCs) to their observed transgene expression in vitro were conducted using cationic liposomes composed of the cationic lipids 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and dimethyldioctadecylammonium bromide (DDAB), with or without equimolar amounts of cholesterol (CHOL) or 1,2-dioleoylphosphatidylethanolamine (DOPE). The relative degree of luciferase expression by CLDCs is dependent on a complex relationship between net charge of the CLDC as well as previously reported properties, such as membrane fluidity and curvature of the cationic bilayer. Assessments were made of the role of these physical properties on CLDC stability in the extracellular medium, the extent of DNA cellular association, and membrane disruption activity. The efficiency of luciferase expression from negatively charged CLDCs is greatly improved by incorporation of DOPE. This result correlates with enhanced resistance to inhibition of gene delivery by heparan sulfate, increased cellular association of DNA, and enhanced membrane disruption activity. Luciferase expression by positively charged CLDCs is greatly reduced by incorporating equimolar amounts of CHOL and DOPE. This result occurs is in spite of increased resistance to heparan sulfate-mediated inhibition of gene delivery, increased DNA cellular association, and enhanced membrane disruption activity. The observed CLDC compositional effects on luciferase expression along with observed effects on the delivery process suggest that a better understanding of the kinetics and specific routes of gene delivery is necessary.

Animals↗

Effect of metal cations on the conformation and inactivation of recombinant human factor VIII.

Heavy metals have been implicated in the aggregation of proteins and the pathophysiology of several neurodegenerative diseases. Herein, we describe the interaction of recombinant human factor VIII (rhFVIII) with Al(+3), Tb(+3), Co(+2), and Fe(+3) using a combination of intrinsic fluorescence, circular dichroism, and high-resolution fourth-derivative absorbance analysis. rhFVIII in solution was titrated with the metal cations and the properties of the resulting complexes were examined. rhFVIII has a tendency to aggregate and inactivate slowly over time under physiological conditions, but this aggregation process is greatly accelerated in the presence of metals with Al(+3) being the most efficient. This leads to a complete loss of activity of the protein. Al(+3)-induced conformational changes in the protein were small but detectable with limited changes seen in secondary and tertiary structure. Because rhFVIII is a multidomain protein with subunits linked through divalent metal cations, the small intramolecular changes seen may be attributed to rearrangements of the subunits to an aggregation-competent conformer that is very similar to that of the native form.

Aluminum↗

Thermodynamic analysis of binding and protonation in DOTAP/DOPE (1:1): DNA complexes using isothermal titration calorimetry.

A better understanding of the nature of the interaction between various cationic lipids used for gene delivery and DNA would lend insight into their structural and physical properties that may modulate their efficacy. We therefore separated the protonation and binding events which occur upon complexation of 1:1 DOTAP (1,2-dioleoyl-3-trimethylammonium propane):DOPE (1,2-dioleoylphosphatidylethanolamine) liposomes to DNA using proton linkage theory and isothermal titration calorimetry (ITC). The enthalpy of DOPE protonation was estimated as -45.0+/-0.7 kJ/mol and the intrinsic binding enthalpy of lipid to DNA as +2.8+/-0.3 kJ/mol. The pK(a) of DOPE was calculated to shift from 7.7+/-0.1 in the free state to 8.8+/-0.1 in the complex. At physiological ionic strength, proton linkage was not observed upon complex formation and the buffer-independent binding enthalpy was +1.0+/-0.4 kJ/mol. These studies indicate that the intrinsic interaction between 1:1 DOTAP/DOPE and DNA is an entropy-driven process and that the affinities of cationic lipids that are formulated with and without DOPE for DNA are controlled by the positive entropic changes that occur upon complex formation.

Binding Sites↗

Insulin containing polyethylenimine-dextran sulfate nanoparticles.

An aqueous nanoparticle delivery system has been developed which employs the oppositely charged polymers polyethylenimine (PEI) and dextran sulfate (DS) with zinc as a stabilizer. It is found that the pH of PEI solutions, the weight ratio of the two polymers, and zinc sulfate concentrations all play significant roles in controlling particle size. Spherical particles of 250 nm mean diameter were produced under optimal conditions which have a zeta potential of approximately +30 mV. Up to 90% drug entrapment efficiency was observed when insulin was used as a model protein drug. No degradation products were detected during in vitro dissolution or in potency studies. Circular dichroism (CD) spectra showed no significant conformational changes compared to free insulin under optimized formulation conditions. Rapid release characteristics were observed in in vitro dissolution studies. Biological activity in steptozotocin-induced diabetic rats, however, exhibited a prolonged hypoglycemic effect. This system offers the following advantages: (1) ease of manufacturing under mild preparation conditions; (2) employment of completely aqueous processing conditions; (3) use of biocompatible polymers which can be prepared aseptically; (4) ability to control particle size; (5) a high level of drug entrapment and (6) an ability to preserve protein secondary structure and biological activity.

Animals↗