Putting it all together: building a prereplicative complex.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to C S Newlon.
Explore the source record for details and available documents.
Autonomously replicating sequence (ARS) elements, which function as the cis-acting chromosomal replicators in the yeast Saccharomyces cerevisiae, depend upon an essential copy of the 11-bp ARS consensus sequence (ACS) for activity. Analysis of the chromosome III replicator ARS309 unexpectedly revealed that its essential ACS differs from the canonical ACS at two positions. One of the changes observed in ARS309 inactivates other ARS elements. This atypical ACS binds the origin recognition complex efficiently and is required for chromosomal replication origin activity. Comparison of the essential ACS of ARS309 with the essential regions of other ARS elements revealed an expanded 17-bp conserved sequence that efficiently predicts the essential core of ARS elements.
Replication fork pause (RFP) sites transiently arresting replication fork movement were mapped to transfer RNA (tRNA) genes of Saccharomyces cerevisiae in vivo. RFP sites are polar, stalling replication forks only when they oppose the direction of tRNA transcription. Mutant tRNA genes defective in assembly of transcription initiation complexes and a temperature-sensitive RNA polymerase III mutant (rpc160-41) defective in initiation of transcription do not stall replication forks, suggesting that transcription is required for RFP activity.
A Kluyveromyces lactis chromosomal sequence of 913 bp is sufficient for replication in Saccharomyces cerevisiae and K. lactis. This fragment contains a 12 bp sequence 5'-ATTTATTGTTTT-3' that is related to the S. cerevisiae ACS (ARS consensus sequence). This dodecamer was removed by site-directed mutagenesis and the effect on K. lactis and S. cerevisiae ARS (autonomous replicating sequence) activity was determined. The dodecamer is essential for S. cerevisiae ARS function but only contributes to K. lactis ARS activity; therefore, its role in K. lactis is unlikely to be the same as that of the essential S. cerevisiae ACS. A 103 bp subclone was found to retain ARS activity in both yeasts, but the plasmid was very unstable in S. cerevisiae. Deletion and linker substitution mutagenesis of this fragment was undertaken to define the DNA sequence required for K. lactis ARS function and to test whether the sequence required for ARS activity in K. lactis and S. cerevisiae coincide. We found a 39 bp core region essential for K. lactis ARS function flanked by sequences that contribute to ARS efficiency. The instability of the plasmid in S. cerevisiae made a fine-structure analysis of the S. cerevisiae ARS element impossible. However, the sequences that promote high-frequency transformation in S. cerevisiae overlap the essential core of the K. lactis ARS element but have different end-points.
All recombination models postulate one or more recombination intermediates that are joint molecules containing two homologous parental molecules. A spike of branched DNA molecules not seen in DNA from mitotic cells was found in the two-dimensional gel analysis of meiotic DNA from S. cerevisiae. The mass of molecules in the spike, the timing of its appearance and disappearance, and its absence from a recombination-defective spo11 mutant are consistent with the hypothesis that it contains recombination intermediates. The spike changes in mass as predicted for joint molecules containing DNA from homologous chromosomes rather than sister chromatids in a strain heterozygous for an RFLP. Finally, joint molecules containing DNA from homologous chromosomes were not found, suggesting that the block to recombination between homologous sequences occurs prior to the formation of joint molecules.
We have tested the clones used in the European Yeast Chromosome III Sequencing Programme for possible artefacts that might have been introduced during cloning or passage through Escherichia coli. Southern analysis was performed to compare the BamHI, EcoRI, HindIII and PstI restriction pattern for each clone with that of the corresponding locus on chromosome III in the parental yeast strain. In addition, further enzymes were used to compare the restriction maps of most clones with the map predicted by the nucleotide sequence (Oliver et al., 1992). Only four of 506 6-bp restriction sites predicted by the sequence were not observed experimentally. No significant cloning artefacts appear to disrupt the published sequence of chromosome III. The restriction patterns of six yeast strains have also been compared. In addition to two previously identified sites of Ty integration on chromosome III (Warmington et al., 1986; Stucka et al., 1989; Newlon et al., 1991), a new polymorphic site involving Ty retrotransposition (the Far Right-Arm transposition Hot-Spot, FRAHS) has been identified close to CRY1. On the basis of simple restriction polymorphisms, the strains S288C, AB972 and W303-1b are closely related, while XJ24-24a and J178 are more distant relatives of S288C. A polyploid distillery yeast is heterozygous for many polymorphisms, particularly on the right arm of the chromosome.
ARS307 is highly active as a replication origin in its native location on chromosome III of Saccharomyces cerevisiae. Its ability to confer autonomous replication activity on plasmids requires the presence of an 11-bp autonomously replicating sequence (ARS) consensus sequence (ACS), which is also required for chromosomal origin function, as well as approximately 100 bp of sequence flanking the ACS called domain B. To further define the sequences required for ARS function, a linker substitution mutagenesis of domain B was carried out. The mutations defined two sequences, B1 and B2, that contribute to ARS activity. Therefore, like ARS1, domain B of ARS307 is composed of functional subdomains. Constructs carrying mutations in the B1 element were used to replace the chromosomal copy of ARS307. These mutations caused a reduction in chromosomal origin activity, demonstrating that the B1 element is required for efficient chromosomal origin function.
Autonomously replicating sequence (ARS) elements are identified by their ability to promote high-frequency transformation and extrachromosomal replication of plasmids in the yeast Saccharomyces cerevisiae. Six of the 14 ARS elements present in a 200-kb region of Saccharomyces cerevisiae chromosome III are mitotic chromosomal replication origins. The unexpected observation that eight ARS elements do not function at detectable levels as chromosomal replication origins during mitotic growth suggested that these ARS elements may function as chromosomal origins during premeiotic S phase. Two-dimensional agarose gel electrophoresis was used to map premeiotic replication origins in a 100-kb segment of chromosome III between HML and CEN3. The pattern of origin usage in premeiotic S phase was identical to that in mitotic S phase, with the possible exception of ARS308, which is an inefficient mitotic origin associated with CEN3. CEN3 was found to replicate during premeiotic S phase, demonstrating that the failure of sister chromatids to disjoin during the meiosis I division is not due to unreplicated centromeres. No origins were found in the DNA fragments without ARS function. Thus, in both mitosis and meiosis, chromosomal replication origins are coincident with ARS elements but not all ARS elements have chromosomal origin function. The efficiency of origin use and the patterns of replication termination are similar in meiosis and in mitosis. DNA replication termination occurs over a broad distance between active origins.
Explore the source record for details and available documents.
The past year has seen significant advances in our understanding of the structure and function of yeast ARS elements. These elements, some of which function as chromosomal origins of DNA replication, are modular in structure. An essential domain, the ARS consensus sequence, binds a multiprotein complex that might be the long-sought initiator protein. The flanking domain contains a DNA unwinding element and a binding site for a multifunctional protein that acts as a replication enhancer.
Explore the source record for details and available documents.
The observed spacing between chromosomal DNA replication origins in Saccharomyces cerevisiae is at least four times shorter than should be necessary to ensure complete replication of chromosomal DNA during the S phase. To test whether all replication origins are required for normal chromosome stability, the loss rates of derivatives of chromosome III from which one or more origins had been deleted were measured. In the case of a 61-kb circular derivative of the chromosome that has two highly active origins and one origin that initiates only 10 to 20% of the time, deletion of either highly active origin increased its rate of loss two- to fourfold. Deletion of both highly active origins caused the ring chromosome to be lost in approximately 20% of cell divisions. This very high rate of loss demonstrates that there are no efficient cryptic origins on the ring chromosome that are capable of ensuring its replication in the absence of the origins that are normally used. Deletion of the same two origins from the full-length chromosome III, which contains more than six replication origins, had no effect on its rate of loss. These results suggest that the increase in the rate of loss of the small circular chromosome from which a single highly active origin was deleted was caused by the failure of the remaining highly active origin to initiate replication in a small fraction (approximately 0.003) of cell cycles.
Explore the source record for details and available documents.
Using two-dimensional agarose gel electrophoresis, we determined the replication map of a 61-kb circular derivative of Saccharomyces cerevisiae chromosome III. The three sites of DNA replication initiation on the ring chromosome are specific and coincide with ARS elements. The three origins are active to different degrees; two are used > 90% of the time, whereas the third is used only 10-20% of the time. The specificity of these origins is shown by the fact that only ARS elements were competent for origin function, and deletion of one of the ARS elements removed the corresponding replication origin. The activity of the least active origin was not increased by deletion of the nearby highly active origin, demonstrating that the highly active origin does not repress function of the relatively inactive origin. Replication termination on the ring chromosome does not occur at specific sites but rather occurs over stretches of DNA ranging from 3 to 10 kb. A new region of termination was created by altering the sites of initiation. The position of the new termination site indicates that termination is not controlled by specific cis-acting DNA sequences, but rather that replication termination is determined primarily by the positions at which replication initiates. In addition, two sites on the ring chromosome were found to slow the progression of replication forks through the molecule: one is at the centromere and one at the 3' end of a yeast transposable element.
Replication origins have been mapped to positions that coincide, within experimental error (several hundred base pairs), with ARS elements. To determine whether the DNA sequences required for ARS function on plasmids are required for chromosomal origin function, the chromosomal copy of ARS306 was deleted and the chromosomal copy of ARS307 was replaced with mutant derivatives of ARS307 containing single point mutations in domain A within the ARS core consensus sequence. The chromosomal origin function of these derivatives was assayed by two-dimensional agarose gel electrophoresis. Deletion of ARS306 deleted the associated replication origin. The effects on chromosomal origin function of mutations in domain A paralleled their effects on ARS function, as measured by plasmid stability. These results demonstrate that chromosomal origin function is a property of the ARS element itself.
Two-dimensional gel electrophoretic replicon mapping techniques were used to identify all functional DNA replication origins and termini in a 26.5-kbp stretch in the left arm of yeast chromosome III. Only one origin was detected; it coincided with an ARS element (ARS306), as have all previously mapped yeast origins. A replication termination region was identified in a 4.3-kbp stretch at the telomere-proximal end of the investigated region, between the origin identified in this paper and the neighboring, previously mapped, ARS305-associated origin (previously called the A6C origin). Termination does not occur at a specific site; instead, it appears to be the consequence of replication forks converging in a stretch of DNA of at least 4.3 kbp.
The 120 bp of yeast centromeric DNA is tightly complexed with protein to form a nuclease-resistant core structure 200 to 240 bp in size. We have used two-dimensional agarose gel electrophoresis to analyze the replication of the chromosomal copies of yeast CEN1, CEN3, and CEN4 and determine the fate of replication forks that encounter the protein-DNA complex at the centromere. We have shown that replication fork pause sites are coincident with each of these centromeres and therefore probably with all yeast centromeres. We have analyzed the replication of plasmids containing mutant derivatives of CEN3 to determine whether the replication fork pause site is a result of an unusual structure adopted by centromere DNA or a result of the protein-DNA complex formed at the centromere. The mutant centromere derivatives varied in function as well as the ability to form the nuclease-resistant core structure. The data obtained from analysis of these derivatives indicate that the ability to cause replication forks to pause correlates with the ability to form the nuclease-resistant core structure and not with the presence or absence of a particular DNA sequence. Our findings further suggest that the centromere protein-DNA complex is present during S phase when replication forks encounter the centromere and therefore may be present throughout the cell cycle.
DNA was isolated from a circular derivative of chromosome III to prepare a library of recombinant plasmids enriched in chromosome III sequences. An ordered set of recombinant plasmids and bacteriophages carrying the contiguous 210-kilobase region of chromosome III between the HML and MAT loci was identified, and a complete restriction map was prepared with BamHI and EcoRI. Using the high frequency transformation assay and extensive subcloning, 13 ARS elements were mapped in the cloned region. Comparison of the physical maps of chromosome III from three strains revealed that the chromosomes differ in the number and positions of Ty elements and also show restriction site polymorphisms. A comparison of the physical map with the genetic map shows that meiotic recombination rates vary at least tenfold along the length of the chromosome.