PubMed Health⌕ Search

Biomedical subjects

C Steinkühler

Publications and source records attributed to C Steinkühler.

At least 37 records · Page 2Linked to original sources

Design of selective eglin inhibitors of HCV NS3 proteinase.

Hepatitis C virus (HCV) infection is a major health problem that leads to cirrhosis and hepatocellular carcinoma in a substantial number of infected individuals, estimated to be 100-200 million worldwide. Unfortunately, immunotherapy or other effective treatments for HCV infection are not yet available, and interferon administration has limited efficacy. Different approaches to HCV therapy are being explored, and these include inhibition of the viral proteinase, helicase, and RNA-dependent RNA polymerase and development of a vaccine. Here we present the design of selective inhibitors with nanomolar potencies of HCV NS3 proteinase based on eglin c. These eglin c mutants were generated by reshaping the inhibitor active site-binding loop, and the results emphasize the role played by residues P5-P4' in enzyme recognition. In addition, alanine scanning experiments provide evidence that the N terminus of eglin c also contributes to NS3 binding. These eglin inhibitors offer a unique tool for accurately assessing the requirements for effective inhibition of the enzymatic activity of NS3 and at the same time can be considered lead compounds for the identification of other NS3 inhibitors in targeted design efforts.

Animals↗

The metal binding site of the hepatitis C virus NS3 protease. A spectroscopic investigation.

The NS3 region of the hepatitis C virus encodes for a serine protease activity, which is necessary for the processing of the nonstructural region of the viral polyprotein. The minimal domain with proteolytic activity resides in the N terminus, where a structural tetradentate zinc binding site is located. The ligands being been identified by x-ray crystallography as being three cysteines (Cys97, Cys99, and Cys145) and one histidine residue (His149), which is postulated to coordinate the metal through a water molecule. In this article, we present an analysis of the role of metal coordination with respect to enzyme activity and folding. Using NMR spectroscopy, the resonances of His149 were assigned based on their isotropic shift in a Co(II)-substituted protein. Data obtained with 15N-labeled NS3 protease were compatible with the involvement of the delta-N of His149 in metal coordination. pH titration experiments showed that the cooperative association of at least two protons is required in the protonation process of His149. Changes in the NMR signals of this residue between pH 7 and 5 are interpreted as evidence for a structural change at the metal binding site, which switches from a "closed" to an "open" conformation. Site-directed mutagenesis of His149 has shown the importance of this residue in the metal incorporation pathway and for achieving an active fold. The metal coordination of the protease was also investigated by circular dichroism and electronic absorption spectroscopies using a Co(II)-substituted enzyme. We show evidence for rearrangements of the metal coordination geometry induced by complex formation with an NS4A peptide cofactor. No such changes were observed upon binding to a substrate peptide. Also, CN- and N3- induced Co(II) ligand field perturbations, which went along with an 1.5-fold enhancement of protease activity.

Amino Acid Substitution↗

Product inhibition of the hepatitis C virus NS3 protease.

The nonstructural protein NS3 of the hepatitis C virus (HCV) harbors a serine protease domain that is responsible for most of the processing events of the nonstructural region of the polyprotein. Its inhibition is presently regarded as a promising strategy for coping with the disease caused by HCV. In this work, we show that the NS3 protease undergoes inhibition by the N-terminal cleavage products of substrate peptides corresponding to the NS4A-NS4B, NS4B-NS5A, and NS5A-NS5B cleavage sites, whereas no inhibition is observed with a cleavage product of the intramolecular NS3-NS4A junction. The Ki values of the hexamer inhibitory products [Ki(NS4A) = 0.6 microM, Ki(NS5A) = 1.4 microM, and Ki(NS4B) = 180 microM] are lower than the Km values of the respective substrate peptides [Km(NS4A-NS4B) = 10 microM, Km(NS5A-NS5B) = 3.8 microM, and Km(NS4B-NS5A) > 1000 microM]. Mutagenesis experiments have identified Lys136 as an important determinant for product binding. The phenomenon of product inhibition can be exploited to optimize peptide inhibitors of NS3 protease activity that may be useful in drug development.

Amino Acid Sequence↗

Potent peptide inhibitors of human hepatitis C virus NS3 protease are obtained by optimizing the cleavage products.

In the absence of a broadly effective cure for hepatitis caused by hepatitis C virus (HCV), much effort is currently devoted to the search for inhibitors of the virally encoded protease NS3. This chymotrypsin-like serine protease is required for the maturation of the viral polyprotein, cleaving it at the NS3-NS4A, NS4A-NS4B, NS4B-NS5A, and NS5A-NS5B sites. In the course of our studies on the substrate specificity of NS3, we found that the products of cleavage corresponding to the P6-P1 region of the substrates act as competitive inhibitors of the enzyme, with IC50s ranging from 360 to 1 microM. A detailed study of product inhibition by the natural NS3 substrates is described in the preceding paper [Steinkühler, C., et al. (1997) Biochemistry 37, 8899-8905]. Here we report the results of a study of the structure-activity relationship of the NS3 product inhibitors, which suggest that the mode of binding of the P region-derived products is similar to the ground-state binding of the corresponding substrates, with additional binding energy provided by the C-terminal carboxylate. Optimal binding requires a dual anchor: an "acid anchor" at the N terminus and a "P1 anchor" at the C-terminal part of the molecule. We have then optimized the sequence of the product inhibitors by using single mutations and combinatorial peptide libraries based on the most potent natural product, Ac-Asp-Glu-Met-Glu-Glu-Cys-OH (Ki = 0.6 microM), derived from cleavage at the NS4A-NS4B junction. By sequentially optimizing positions P2, P4, P3, and P5, we obtained several nanomolar inhibitors of the enzyme. These compounds are useful both as a starting point for the development of peptidomimetic drugs and as structural probes for investigating the substrate binding site of NS3 by modeling, NMR, and crystallography.

Amino Acid Sequence↗

Rational design and functional expression of a constitutively active single-chain NS4A-NS3 proteinase.

BACKGROUND: The proteinase domain of the hepatitis C virus NS3 protein is involved in the maturation of the viral polyprotein. A central hydrophobic domain of the NS4A protein is required as a cofactor for its proteolytic activity. The three-dimensional structure of the proteinase domain alone and complexed with an NS4A-derived peptide has been solved recently and revealed that the N terminus of the proteinase is in near proximity to the C terminus of the cofactor. To study the molecular basis of the enzyme activation by its cofactor and to overcome the difficulties of structural and functional investigation associated with a two-species complex, we rationally designed a link to bridge the two molecules in order to have a single polypeptide construct. RESULTS: The engineered construct led to the production of a stable, monomeric protein with proteolytic activity that is independent from the addition of a synthetic peptide representing the cofactor domain of the NS4A protein. The protein is active on both protein and synthetic peptide substrates. Spectroscopic and kinetic analysis of the recombinant NS4A-NS3 single-chain proteinase demonstrated features superimposable with the isolated NS3 proteinase domain complexed with the NS4A cofactor. CONCLUSIONS: We designed a very tight connection between the NS3 and NS4A polypeptide chains with the rationale that this would allow a more stable structure to be formed. The engineered single-chain enzyme was indistinguishable from the NS3 proteinase complexed with its NS4A cofactor in all enzymatic and physico-chemical properties investigated.

Base Sequence↗

Engineering, characterization and phage display of hepatitis C virus NS3 protease and NS4A cofactor peptide as a single-chain protein.

The polyprotein encoded by hepatitis C virus (HCV) genomic RNA is processed into functional polypeptides by both host- and virus-encoded proteases. The HCV-encoded NS3 protease and its cofactor peptide NS4A form a non-covalent complex, which participates in processing the viral polyprotein. This proteolytic activity is believed to be essential for virus proliferation and thus the NS3 protease is a prime target for developing anti-HCV pharmacological agents. Recent X-ray crystallography structural studies have revealed the nature of this non-covalent complex between NS3 protease and the 'active' central segment of NS4A, providing the opportunity to design a single-chain polypeptide. To this end, the DNA sequence encoding for the NS4A peptide (residues 21-34) was genetically fused via a short linker, capable of making a beta-turn, to the N-terminus of the NS3 protease domain. This engineered single-chain NS3-protease (scNS3) is fully active with kinetic parameters virtually identical with those of the NS3/ NS4A non-covalent complex. Moreover, the scNS3 protease can be displayed on filamentous phage and affinity selected using an immobilized specific inhibitor. The scNS3 expressed as a soluble protein and in a phage-display format facilitates enzyme engineering for further structural studies and in vitro selection of potential drug-resistant mutants. These are important steps towards developing effective anti-protease compounds.

Amino Acid Sequence↗

Multiple enzymatic activities associated with recombinant NS3 protein of hepatitis C virus.

The hepatitis C virus (HCV) nonstructural 3 protein (NS3) contains at least two domains associated with multiple enzymatic activities; a serine protease activity resides in the N-terminal one-third of the protein, whereas RNA helicase activity and RNA-stimulated nucleoside triphosphatase activity are associated with the C-terminal portion. To study the possible mutual influence of these enzymatic activities, a full-length NS3 polypeptide of 67 kDa was expressed as a nonfusion protein in Escherichia coli, purified to homogeneity, and shown to retain all three enzymatic activities. The protease activity of the full-length NS3 was strongly dependent on the activation by a synthetic peptide spanning the central hydrophobic core of the NS4A cofactor. Once complexed with the NS4A-derived peptide, the full-length NS3 protein and the isolated N-terminal protease domain cleaved synthetic peptide substrates with comparable efficiency. We show that, as in the case of the isolated protease domain, the protease activity of full-length NS3 undergoes inhibition by the N-terminal cleavage products of substrate peptides corresponding to the NS4A-NS4B and NS5A-NS5B. We have also characterized and quantified the NS3 ATPase, RNA helicase, and RNA-binding activities under optimized reaction conditions. Compared with the isolated N-terminal and C-terminal domains, recombinant full-length NS3 did not show significant differences in the three enzymatic activities analyzed in independent in vitro assays. We have further explored the possible interdependence of the NS3 N-terminal and C-terminal domains by analyzing the effect of polynucleotides on the modulation of all NS3 enzymatic functions. Our results demonstrated that the observed inhibition of the NS3 proteolytic activity by single-stranded RNA is mediated by direct interaction with the protease domain rather than with the helicase RNA-binding domain.

Adenosine Triphosphatases↗

The hepatitis C virus NS3 proteinase: structure and function of a zinc-containing serine proteinase.

The hepatitis C virus (HCV) NS3 protein contains a serine proteinase domain implicated in the maturation of the viral polyprotein. NS3 forms a stable heterodimer with NS4A, a viral membrane protein that acts as an activator of the NS3 proteinase. The three-dimensional structure of the NS3 proteinase complexed with an NS4A-derived peptide has been determined. The NS3 proteinase adopts a chymotrypsin-like fold. A beta-strand contributed by NS4A is clamped between two beta-strands within the N terminus of NS3. Consistent with the requirement for extraordinarily long peptide substrates (P6-P4'), the structure of the NS3 proteinase reveals a very long, solvent-exposed substrate-binding site. The primary specificity pocket of the enzyme is shallow and closed at its bottom by Phe-154, explaining the preference of the NS3 proteinase for cysteine residues in the substrate P1 position. Another important feature of the NS3 proteinase is the presence of a tetrahedral zinc-binding site formed by residues Cys-97, Cys-99, Cys-145 and His-149. The zinc-binding site has a role in maintaining the structural stability and guiding the folding of the NS3 serine proteinase domain. Inhibition of the NS3 proteinase activity is regarded as a promising strategy to control the disease caused by HCV. Remarkably, the NS3 proteinase is susceptible to inhibition by the N-terminal cleavage products of substrate peptides corresponding to the NS4A/NS4B, NS4B/NS5A and NS5A/NS5B cleavage sites. The Ki values of the inhibitory products are lower than the K(m) values of the respective substrates and follow the order NS4A < NS5A < NS4B. Starting from the observation that the NS3 proteinase undergoes product inhibition, very potent, active site-directed inhibitors have been generated using a combinatorial peptide chemistry approach.

Amino Acid Sequence↗

Complex formation between the hepatitis C virus serine protease and a synthetic NS4A cofactor peptide.

The NS3 protein of the hepatitis C virus contains a serine protease that, upon binding to its cofactor, NS4A, is responsible for maturational cleavages that occur in the nonstructural region of the viral polyprotein. We have studied in vitro complex formation between the NS3 protease domain expressed in Escherichia coli and a synthetic peptide spanning the minimal domain of the NS4A cofactor. Complex dissociation constants in the low micromolar range were measured using different techniques such as activity titration, fluorescence titration, and pre-equilibrium analysis of complex formation. Cofactor binding was strictly dependent on the glycerol content of buffer solutions and was not significantly influenced by substrate saturation of the enzyme. NS4A peptide binding to NS3 was accompanied by changes in the circular dichroism spectrum in the region between 270 and 290 nm, as well as by an enhancement of tryptophan fluorescence. Conversely, no changes in the far UV region of the circular dichroism spectrum were detectable. These data are indicative of induced tertiary structure changes and suggest that the secondary structure content of the uncomplexed enzyme does not differ significantly from that of the NS3-cofactor complex. Pre-equilibrium measurements of complex formation showed very low values for k(on), suggesting conformational transitions to be rate limiting for the association reaction.

Amino Acid Sequence↗

Substrate specificity of the hepatitis C virus serine protease NS3.

The substrate specificity of a purified protein encompassing the hepatitis C virus NS3 serine protease domain was investigated by introducing systematic modifications, including non-natural amino acids, into substrate peptides derived from the NS4A/NS4B cleavage site. Kinetic parameters were determined in the absence and presence of a peptide mimicking the protease co-factor NS4A (Pep4A). Based on this study we draw the following conclusions: (i) the NS3 protease domain has an absolute requirement for a small residue in the P1 position of substrates, thereby confirming previous modelling predictions. (ii) Optimization of the P1 binding site occupancy primarily influences transition state binding, whereas the occupancy of distal binding sites is a determinant for both ground state and transition state binding. (iii) Optimized contacts at distal binding sites may contribute synergistically to cleavage efficiency.

Alanine↗

Characterization of engineered hepatitis C virus NS3 protease inhibitors affinity selected from human pancreatic secretory trypsin inhibitor and minibody repertoires.

Given the extent of hepatitis C virus (HCV) infection as a worldwide health problem and the lack of effective treatment, the development of anti-HCV drugs is an important and pressing objective. Previous studies have indicated that proteolytic events mediated by the NS3 protease of HCV are fundamental to the generation of an active viral replication apparatus, as unequivocably demonstrated for flaviviruses. As a result, the NS3 protease has become a major target for discovering anti-HCV drugs. To gain further insight into the biochemical and biophysical properties of the NS3 enzyme binding pocket(s) and to generate biological tools for developing antiviral strategies, we decided to engineer macromolecular ligands of the NS3 protease domain. Phage-displayed repertoires of minibodies ("minimized" antibody-like proteins) and human pancreatic secretory trypsin inhibitor were sampled by using the recombinant NS3 protease domain as a ligate molecule. Two protease inhibitors were identified and characterized biochemically. These inhibitors show marked specificity for the viral protease and potency in the micromolar range but display different mechanisms of inhibition. The implications for prospective development of low-molecular-weight inhibitors of this enzyme are discussed.

Amino Acid Sequence↗

The nonstructural proteins of the hepatitis C virus: structure and functions.

The hepatitis C virus is the major causative agent of nonA-nonB hepatitis worldwide. Although this virus cannot be cultivated in cell culture, several of its features have been elucidated in the past few years. The viral genome is a single-stranded, 9.5kb long RNA molecule of positive polarity. The viral genome is translated into a single polyprotein of about 3000 amino acids. The virally encoded polyprotein undergoes proteolytic processing by a combination of cellular and viral proteolytic enzymes in order to yield all the mature viral gene products. The gene order of HCV has been determined to be C-E1-E2-p7-NS2-NS3-NS4A-NS4B-NS5A-NS5B. The mature structural proteins, C, E1 and E2 have been shown to arise from the viral polyprotein via proteolytic processing by host signal peptidases. Conversely, generation of the mature nonstructural proteins relies on the activity of viral proteases. Thus, cleavage at the NS2/NS3 junction is accomplished by a metal-dependent autoprotease encoded within NS2 and the N-terminus of NS3. The remaining cleavages downstream from this site are effected by a serine protease contained within the N-terminal region of NS3. Besides the protease domain, NS3 also contains an RNA helicase domain at its C-terminus. NS3 forms a heterodimeric complex with NS4A. The latter is a membrane protein that has been shown to act as a cofactor of the protease. Whereas the NS5B protein has been shown to be the viral RNA-dependent RNA polymerase, no function has yet been attributed to NS4B and NS5A. The latter is a cytoplasmic phosphoprotein and appears to be involved in mediating the resistance of the hepatitis C virus to the action of interferon.

Hepacivirus↗

A zinc binding site in viral serine proteinases.

The NS3 protein of hepatitis C virus contains a chymotrypsin-like serine proteinase domain. We built a homology model of this domain which predicts the presence of a tetradentate metal binding site formed by three cysteines and one histidine. These residues are strictly conserved in all known hepatitis C viral genotypes as well as in other recently discovered related hepatitis viruses. We show that the hepatitis C virus enzyme does indeed contain a Zn2+ ion with S3N ligation and that the metal is required for structural integrity and activity of the enzyme. Strikingly, the residues forming the metal binding site are also conserved in the chymotrypsin-like 2A cysteine proteinases of picornaviruses. Remarkably, in these highly variable viral genomes the metal binding site is more conserved than the catalytic residues and thus allows us to define a novel class of zinc binding chymotrypsin-like proteinases and to identify a new attractive target for antiviral therapy.

Amino Acid Sequence↗

A continuous assay of hepatitis C virus protease based on resonance energy transfer depsipeptide substrates.

Hepatitis C virus (HCV) is the major causative agent of non-A non-B hepatitis, an important health problem with an estimated 50 million people infected worldwide. Among the possible targets for therapeutic intervention, the serine protease contained within the N-terminal region of nonstructural protein 3 (NS3 protease) is so far the best characterized. In vitro characterization of synthetic substrates based on all the natural cleavage sites (as well as a series of analogs) has consistently revealed poor kinetic parameters, making them unsuitable for sensitive high-throughput screening. To overcome these difficulties, we have recently developed depsipeptide substrates incorporating an ester bond between residues P1 and P&prime1. Due to ready transesterification of the scissile bond to the acyl-enzyme intermediate, these substrates showed very high kcat/Km values, enabling detection of activity with subnanomolar NS3 concentrations. We have used the same principle to synthesize internally quenched depsipeptide fluorogenic substrates based on resonance energy transfer between the donor/acceptor couple 5-[(2'-aminoethyl)amino]naphthalene sulfonic acid/4-[[4'-(dimethylamino)phenyl]azo]benzoic acid, and developed a continuous assay for NS3 activity. Substrate cleavage is linear with enzyme concentration: depending on the conditions chosen, we estimated a detection limit for NS3 between 1 nM and 250 pM. The suitability of the assay for evaluation of inhibitors was established using as competitor a tridecapeptide corresponding to the natural NS4A/4B cleavage site; this gave an IC50 of 30 microM, well in agreement with the previously found Km value (40 microM).

Chromatography, High Pressure Liquid↗

Synthetic depsipeptide substrates for the assay of human hepatitis C virus protease.

Hepatitis C virus (HCV) is the major etiological agent of both parenterally transmitted and sporadic non-A, non-B hepatitis. The disease is a major health problem with an estimated 50 million people infected worldwide, a high percentage of whom become chronically infected and are at high risk for liver cirrhosis. The serine protease contained within the N-terminal region of the nonstructural protein 3 (NS3 protease) of HCV is considered a promising target for the development of an antiviral therapy. A prime requisite to study in detail the biochemistry of the protease as well as develop inhibitors is the availability of a fast and sensitive in vitro assay of enzyme activity. However, due to their low kcat/Km values, synthetic peptide substrates based on the natural cleavage sites appear unsuitable for this purpose. We show here that appropriate substrates can be obtained by substituting the scissile amide bond with an ester linkage. The resulting depsipeptides show >100-fold improvement in kcat/Km values, up to 13,000 M-1 s-1, enabling detection of activity with subnanomolar NS3 concentrations. The ester substrates are obtained in high yield entirely by solid-phase synthesis using commercially available materials, without the need for any preassembled building blocks.(c) 1996 Academic Press, Inc.

Amino Acid Sequence↗

In vitro activity of hepatitis C virus protease NS3 purified from recombinant Baculovirus-infected Sf9 cells.

A recombinant Baculovirus expression system was used for the production of a 20-kDa protein encompassing the hepatitis C virus NS3 protease domain. The protein was purified to apparent homogeneity after detergent extraction of cell homogenates. It was shown to be a monomer in solution and to cleave the in vitro translated precursor proteins NS4A-NS4B and NS5A-NS5B, but not the NS4B-NS5A or the NS3-NS4A precursors. The enzyme also cleaved a 20-mer peptide corresponding to the NS4A-NS4B junction with kcat/Km = 174 m(-1) s(-1). Peptides harboring NS4A sequences comprising amino acids 21-54 (Pep4A21-54) and 21-34 (Pep4A21-34) were found to induce an up to 2.8-fold acceleration of cleavage. Kinetic analysis revealed that this acceleration was due to an increase in kcat whereas no significant effect on Km could be detected. Pep4A21-54 was also an absolute requirement for cleavage of in vitro translated NS4B-NS5A by the purified protease. From these data we conclude that: (i) the purified protease domain shows substrate specificity and cleavage requirements similar to those previously reported on the basis of transfection experiments, (ii) activation of the purified protease by the NS4A co-factor can be mimicked by synthetic peptide analogs, and (iii) a central hydrophobic region of NS4A with a minimum core of 14 amino acids is responsible for the interaction with NS3.

Amino Acid Sequence↗

Copper-glutathione complexes under physiological conditions: structures in solution different from the solid state coordination.

The physiologically important copper complexes of oxidized glutathione have been examined by electron spin resonance (ESR) spectroscopy in aqueous solution at neutral pH. Low temperature measurements show that the Cu(II) binding site in oxidized glutathione has the same ligand arrangement as in copper complexes of S-methylglutathione, glutamine, glutamate and glycine. The site is composed of the amino nitrogens and the carboxyl oxygens of two gamma-glutamyl residues; there is no interaction with amide nitrogens, the sulphur bond or the glycyl carboxyl groups. At high metal to ligand ratios a binuclear species exists, in which each Cu(II) binds only to one gamma-glutamyl residue. The previously reported forbidden transition detected at g = 4 is due to non-specific aggregation and not to spin coupling of intramolecular sites. Liquid solution ESR spectra show the Cu(II)-glutathione complex has a lower mobility than the corresponding Cu(II)-S-methylglutathione species. From the degree of spectral anisotropy the complex with glutathione is calculated to exist as a dimer. These results demonstrate that the physiologically relevant complex between copper and oxidized glutathione in solution is completely different from the known solid state structure determined by crystallography.

Binding Sites↗

Activity of purified hepatitis C virus protease NS3 on peptide substrates.

The protease domain of the hepatitis C virus (HCV) protein NS3 was expressed in Escherichia coli, purified to homogeneity, and shown to be active on peptides derived from the sequence of the NS4A-NS4B junction. Experiments were carried out to optimize protease activity. Buffer requirements included the presence of detergent, glycerol, and dithiothreitol, pH between 7.5 and 8.5, and low ionic strength. C- and N-terminal deletion experiments defined a peptide spanning from the P6 to the P4' residue as a suitable substrate. Cleavage kinetics were subsequently measured by using decamer P6-P4' peptides corresponding to all intermolecular cleavage sites of the HCV polyprotein. The following order of cleavage efficiency, in terms of kcat/Km, was determined: NS5A-NS5B > NS4A-NS4B >> NS4B-NS5A. A 14-mer peptide containing residues 21 to 34 of the protease cofactor NS4A (Pep4A 21-34), when added in stoichiometric amounts, was shown to increase cleavage rates of all peptides, the largest effect (100-fold) being observed on the hydrolysis of the NS4B-NS5A decamer. From the kinetic analysis of cleavage data, we conclude that (i) primary structure is an important determinant of the efficiency with which each site is cleaved during polyprotein processing, (ii) slow cleavage of the NS4B-NS5A site in the absence of NS4A is due to low binding affinity of the enzyme for this site, and (iii) formation of a 1:1 complex between the protease and Pep4A 21-34 is sufficient and required for maximum activation.

Amino Acid Sequence↗