Biomedical subjects

C T Hanks

Publications and source records attributed to C T Hanks.

At least 37 records · Page 2Linked to original sources

PubMed1995

In vitro reaction of macrophages to metal ions from dental biomaterials.

OBJECTIVES: This study was conducted to 1) measure the sensitivity of human and mouse macrophages to metal ions which are released from dental biomaterials, 2) compare these sensitivities with those of other cell types in the oral cavity, and 3) determine if metal ions alter the metabolism and synthetic processes of these cells at lower concentrations than are required to lyse the cells. This information will help define the biological risks associated with the release of metal ions into the oral cavity. METHODS: Macrophages were exposed to a range of concentrations of Ag1+, Au3+, Cu2+, Hg2+, Ni2+, Pd2+, Pt4+, and Zn2+ for 24 h in cell culture. The concentrations which caused a 50% decrease in succinic dehydrogenase (SDH) activity, protein production, and lactate dehydrogenase (LDH) release were measured and compared with these values for fibroblasts and osteoblasts. RESULTS: Most metal ions caused alteration in SDH activity and protein production at lower concentrations than were required to induce LDH release. There were exceptions to this trend, and the differences were not always statistically significant. Furthermore, although the macrophages sometimes had statistically different sensitivities to metal ions than fibroblasts or osteoblasts, these differences were less than one order of magnitude. Macrophage response to the metal ions was highly dependent on the metal ion and the species of macrophage. SIGNIFICANCE: Macrophages react adversely to metal ions at similar concentrations as other cell types found in the oral cavity. Furthermore, the concentrations which affect cell metabolism and protein production are generally lower than those which lyse the cells. Thus, non-lethal concentrations of metal ions may alter the secretion of protein inflammatory mediators such as cytokines which direct the inflammatory response in tissues.

Analysis of Variance↗

PubMed1995

Effects of unpolymerized resin components on the function of accessory cells derived from the rat incisor pulp.

Monomeric resin components from dental composites are toxic to fibroblasts in culture and thus may interfere with the local immune system of the pulp, reducing its effective defense potential, either by cytotoxicity or by a more specific immune mechanism. Therefore, the present study was undertaken to observe the cytotoxic effects elicited by certain unpolymerized components of resin composites upon the function of accessory pulp cells in mitogen-induced proliferation of T-lymphocytes. Accessory cells from the rat incisor pulp were released following enzymatic digestion with collagenase. The assay included incubation of these cells with purified T-lymphocytes from cervical lymph nodes for 72 h in the presence of different concentrations of the resin components. The proliferative T-lymphocyte response was monitored by 3H-thymidine incorporation. Initially, we conducted experiments on spleen cells to determine the proper concentration intervals for suitable testing of the resin components. To assess the individual susceptibility of accessory cells and T-lymphocytes, we pre-treated each of these cells with some of the test materials prior to assay. At low concentrations, urethane dimethacrylate (UDMA), bisglycidyl methacrylate (bis-GMA), triethylene glycol dimethacrylate (TEGDMA), and bis-phenol A (BPA) increased spleen cell proliferation to concanavalin A (con A). Purified T-lymphocytes stimulated by pulpal cells did not show enhanced responses to UDMA, bis-GMA, glycidyl mehtacrylate (GMA), or N,N,-dihydroxyethyl-p-toluidine (DHEpT). At higher concentrations, all substances except camphoroquinone (CAMP) showed inhibitory effects in both test systems. The in vitro study shows that resin components can evoke either immunosuppression or immunostimulation on mitogen-driven proliferation of purified T-lyumphocytes and spleen cells.

Animals↗

PubMed1995

Cytotoxic interactive effects of dentin bonding components on mouse fibroblasts.

Previous studies have shown a wide range of pulpal reactions to dentin bonding systems and a poor correlation between in vitro and in vivo toxicity of dentin bonding agents. Because dentin bonding agents are composed of multiple components which may diffuse through dentin, we hypothesized that these components may cause cytotoxicity through interactive (synergistic) effects. We investigated the cytotoxicities of four dentin bonding components--HEMA, Bis-GMA, TEGDMA, and UDMA--and interactive effects for three binary combinations of the dentin bonding components--HEMA and Bis-GMA, Bis-GMA and TEGDMA, and TEGDMA and UDMA. Cytotoxicities to Balb/c 3T3 mouse fibroblasts were measured by the MTT assay. Concentrations which caused 50% toxicity compared with controls (TC50 values) were compared, and the interactive effects were determined by evaluation of the differences between observed and expected MTT activities of the cells. The ranks of toxicity of the dentin bonding components in terms of TC50 values were as follows: Bis-GMA > UDMA > TEGDMA >>> HEMA (least toxic) after 24- and 72-hour exposures. As binary combinations, the three combinations of dentin bonding components interacted in three ways--synergism, additivism, and antagonism--which were influenced by the concentrations of both components. The longer period of exposure resulted in a significant increase in the cytotoxicity of the dentin bonding components and combinations. The findings indicate that both exposure time and the interactions between the dentin bonding components may be important parameters in determining the cytotoxicity of dentin bonding agents in vivo.

3T3 Cells↗

PubMed1994

Application of flow cytometry to determine the cytotoxicity of urethane dimethacrylate in human cells.

The effects of an oligomer, urethane dimethacrylate (UDMA), on two human cell lines were studied using flow cytometry (FCM). Untreated and treated cultures of propidium iodine-stained KB (epidermal oral carcinoma cells) and human foreskin fibroblast (HFF) cells were analyzed for cellular DNA content. Concentrations of 10 and 25 microM of UDMA slightly perturbed the KB cell cycle progression at 24 and 48 h of incubation. However, the effect of 50 microM was more pronounced at the latter incubation time period. In cell growth experiments, the sublethal concentrations (10 and 25 microM) produced inhibition of KB cell growth rate at a moderate level, which resulted in the prolongation of cell population doubling time. Significant inhibition of cell growth occurred when 50 microM (lethal concentration) was used. Data obtained from the cell cycle perturbation analysis, evidenced by FCM, correlated with the extent of inhibition in KB cell growth rates. The effects of sublethal concentrations were reversible during a 24 h period of oligomer withdrawal from culture medium. In contrast, the effects of 50 microM were not reversible. In HFF cells the depletion of S phase in the cell cycle was the major effect of 50 microM of UDMA. It was concluded that FCM technology is an ideal and practical approach for studying the cytotoxicity of components of dental composites.

Carcinoma↗

PubMed1994

In vitro effects of metal ions on cellular metabolism and the correlation between these effects and the uptake of the ions.

The effects of Ag+1, Au+3, Cd+2, Cu+2, Ga+3, In+3, Ni+2, Pd+2, and Zn+2 on DNA synthesis, protein synthesis, succinic dehydrogenase activity, and total cellular protein of mammalian fibroblasts were measured for exposures less than 12 h. The rates at which these cellular functions responded to metal ion exposure were compared and related to the uptake rate of the ions into the cells. These rates of response were significantly different: DNA synthesis decreased the fastest, followed by protein synthesis, succinic dehydrogenase activity, and total protein. This order of response was similar for most metal ions. At 4 h, the rate of uptake of the metal ions correlated most closely with depression of succinic dehydrogenase activity, whereas at 8 h, the uptake correlated most closely with depression of protein synthesis. The similar response of cells to all metal ions may imply that these ions act on cells by similar mechanisms. The rates of uptake of Ag+1, Cu+2, and Zn+2 were sufficiently fast that in vivo exposures of tissues to these metals for periods less than 12 h would be capable of disrupting cellular metabolism.

Animals↗

PubMed1994

Effect of cell line on in vitro metal ion cytotoxicity.

OBJECTIVES: The choice of cell line for in vitro biological tests which assess the cytotoxicity of dental materials remains controversial, yet this issue is important because these tests are widely used to rate the biocompatibility of new and existing materials, and many different cell lines are commonly used. The purpose of the current study was to quantify the responses of four cell lines (Balb/c 3T3, L929, ROS 17/2.8 and WI-38) to 14 metal ions which are released from dental materials, and relate these responses to the metabolic activity and population doubling times of these cells. METHODS: Succinic dehydrogenase (SDH) activity was used to monitor metabolic activity and cytotoxic response. RESULTS: The cell lines responded differently to most metal ions. In general, the Balb/c 3T3 line was the most sensitive, and the WI-38 line was the least sensitive. However, there were many exceptions depending on the metal ion. The passage number of the cells also affected the cytotoxic response. It was concluded that the cytotoxicity of materials which release metal ions will be significantly different depending on which cell line is selected and its passage number. SIGNIFICANCE: Based on the findings that cell lines ranked the toxicities of the metal ions similarly, it seems reasonable to use these types of in vitro tests to rank the cytotoxicities of materials. However, if these types of tests are used to predict in vivo cytotoxicity, care should be taken to choose conditions and cells which are relevant.

3T3 Cells↗

PubMed1994

Correlation of cytotoxicity with element release from mercury- and gallium-based dental alloys in vitro.

OBJECTIVES: An in vitro screening test was used to compare the cytotoxicity and elemental release from mercury- and gallium-based dental restorative materials. METHODS: The test employed three sequential extractions of the samples into cell-culture medium which were then used to evaluate the cytotoxicity of the samples and the release of elements from the samples. Cytotoxicity was measured by placing the extract in contact with Balb/c mouse fibroblasts for 24 h and measuring the succinic dehydrogenase activity of the cells. The release of elements was measured by means of atomic absorption spectrophotometry. RESULTS: Samples of Tytin (Kerr) showed no cytotoxicity compared to Teflon controls. Dispersalloy (Johnson and Johnson) was severely cytotoxic initially when Zn release was greatest, but was less toxic between 48 and 72 h as Zn release decreased. Gallium Alloy GF (Tokuriki Honten) was moderately cytotoxic after 8 h, and increased in cytotoxicity thereafter, which correlated with a substantial and persistent release of Ga from this material. SIGNIFICANCE: The results of the current study concurred with in vivo assessments of these materials, and the use of sequential extractions was useful in determining trends in the cytotoxicity and elemental release from these materials.

3T3 Cells↗

PubMed1994

Cytotoxicity of components of resins and other dental restorative materials.

Cytotoxicity testing of dental restorative materials must be viewed as an assessment of hazards, that is the potential of the material to cause pulpal problems. In this context, composites, glass ionomers, amalgams, zinc-based cements and peroxide bleaching agents are all possible hazards to the pulp. The risks that these materials will cause pulpal toxicity in vivo can be partly estimated by assessing the cytotoxicity of the substances which are released from these materials in vitro and comparing these cytotoxic concentrations with those concentrations that are present in vivo. The resin components of composites, metal ions and hydrogen peroxide, all of which are released from dental restorative materials, have been shown to be cytotoxic in vitro in sufficient concentrations. The potencies of these substances are quite diverse. However, the cytotoxicity of these substances in usage tests, and therefore the risks of pulpal toxicity, depends on their ability to diffuse through the dentine and accumulate in the pulp.

Animals↗

PubMed1994

Permeability of biological and synthetic molecules through dentine.

The diffusion through dentine by a number of biological and synthetic molecules, including resins and dyes, is reported. In vitro measurements were derived by experiments with a modified 'split-chamber device'. Diffusion was found to be indirectly proportional to dentine thickness for all molecules. Permeability of water-soluble molecules and ethanol-soluble molecules was proportional to the molecular weights, except for fluorescein, hydrogen peroxide (H2O2) and urethane dimethacrylate. The resin components tested are not soluble enough in an aqueous medium to diffuse through 0.5 mm dentine at sufficient concentrations to cause cytotoxicity to pulpal cells.

Blood Proteins↗

PubMed1993

Uptake of metal cations by fibroblasts in vitro.

Atomic absorption spectroscopy was used to assess uptake of Ag+1, Au+4, Cd+2, Cu+2, In+3, Ni+2, Pd+2, and Zn+2 by in vitro cultures of Balb/c 3T3 fibroblasts as a function of concentration of the cations in cell-culture medium. Reversibility of this uptake was also measured. Metal cations exhibited a 400-fold difference in their tendency to accumulate in the cells; In+3 tended to accumulate the most, whereas Pd+2 accumulated the least. Uptake of the cations in the cells increased linearly with the concentration of the cation in the medium for all cations up to their 50% toxicity concentrations. Reversal of this uptake was slower than that of the initial uptake for three cations studied in more detail (Cd+2, In+3, and Ni+2). The duration of the initial exposure affected the proportion of the metal cations that were retained by the cells 5 h after the cations were removed from the medium. The proportion of retained Cd+2 did not change when the initial exposure was increased from 2 h to 6 h, whereas the proportion of retained In+3 decreased and Ni+2 increased over the same period. The tendency of the cells to accumulate these cations correlated with their cytotoxic potency (measured previously).

Animals↗

PubMed1993

Autoradiographic study of the effects of pulsed electromagnetic fields on bone and cartilage growth in juvenile rats.

Application of pulsed electromagnetic fields (PEMF) has been used in growth and repair of non-union bone fractures. The similarities between the fibrocartilage callus in non-union bone fractures and the secondary cartilage in the mandibular condyle, both histologically and functionally, lead naturally to study the effects of PEMFs on growth in the condyle. The purposes of this study were: (1) to describe the effects of PEMFs on the growth of the condyle using autoradiography, [3H]-proline and [3H]-thymidine, and (2) to differentiate between the effects of the magnetic and electrical components of the field. Male pre-adolescent Sprague-Dawley rats (28 days old) were divided into three experimental groups of five animals each: (1) PEMF-magnetic (M), (2) PEMF-electrical (E) and (3) control, and were examined at three different times-3, 7 and 14 days of exposure. Each animal was exposed to the field for 8 h per day. Histological coronal sections were processed for quantitative autoradiography to determine the mitotic activity of the condylar cartilage and the amount of bone deposition. The PEMF (magnetic or electrical) had statistically significant effects only on the thickness of the articular zone, with the thickness in the PEMF-M group being the most reduced. Length of treatment was associated with predictable significant changes in the thickness of the condylar cartilage zones and the amount of bone deposition.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMed1993

The effect of cell monolayer density on the cytotoxicity of metal ions which are released from dental alloys.

The effect of cell density (number of cells per unit area of a monolayer culture) on the in vitro cytotoxicity of metal ions which are known to be released from dental materials was investigated. The effects of cell density (1) may explain previous discrepancies in in vitro tests, (2) may be important in wound healing where cell density changes over time, and (3) may help clarify the mechanisms of cytotoxicity of metal ions. Balb/c 3T3 fibroblasts were plated at cell densities ranging from 10,000-80,000 cells/cm2 and were exposed to 8 concentrations of 10 different metal ions. After 24 h, the succinic dehydrogenase activity and DNA synthesis were measured to quantify the cytotoxic effect. Higher cell densities markedly reduced the sensitivity of these fibroblasts to all metal ions except Al+3 and Zn+2, but the magnitude of the reduction was metal dependent. In addition, the DNA synthesis was inhibited more than the succinic dehydrogenase activity for all metal ions except Zn+2. The unique effect of cell density on each metal ion supported the hypothesis that the effect was not simply caused by a dilution of the number of metal ions per cell. Given these results, the effect of cell density should be carefully selected in in vitro cytotoxicity tests.

3T3 Cells↗

PubMed1993

Cytotoxicity and dentin permeability of carbamide peroxide and hydrogen peroxide vital bleaching materials, in vitro.

There has been recent concern about the inadvertent exposure of dentin with patent tubules as well as gingiva to bleaching systems containing 10-15% carbamide peroxide or 2-10% hydrogen peroxide for more than a few minutes. The aims of the present study were: (1) to determine the cytotoxicity of dilutions of hydrogen peroxide in cell culture; (2) to measure hydrogen peroxide diffusion from bleaching agents through dentin in vitro; and (3) to determine the risk of hydrogen peroxide-induced cytotoxicity from exposure of dentin to these vital bleaching agents. The 50% inhibitory dose (ID50) of hydrogen peroxide to succinyl dehydrogenase activity in cultured cells was found to be 0.58 mmol/L after 1 h. All bleaching materials demonstrated diffusion of hydrogen peroxide through dentin in an "in vitro pulp chamber" device. The one- and six-hour diffusates of all bleaching agents through 0.5-mm dentin exceeded the ID50 in monolayer cultures. Inhibition of succinyl dehydrogenase activity corresponded to the amount of hydrogen peroxide that can rapidly diffuse through dentin in vitro and reach concentrations which are toxic to cultured cells in less than 1 h.

3T3 Cells↗

PubMed1992

In vitro synergistic, antagonistic, and duration of exposure effects of metal cations on eukaryotic cells.

Effects of duration of exposure of single metal cations (Ag+1, Cd+2, Cu+2, Ga+3, Ni+2, and Zn+2) on 3H-thymidine (3H-Tdr) incorporation and 3-[4,5-dimethyl-thiazol-2yl-]-2,5-diphenyl tetrazolium bromide-formazan (MTT-f) production in cultured murine fibroblasts (Balb/c 3T3) were investigated, and the synergistic and antagonistic effects of two metal cations applied simultaneously to the fibroblasts were assessed. The effects of duration of exposure were quantified using TC50 values (concentration of an element required to cause 50% toxicity compared with controls) measured after 24, 48, or 72 h. Using MTT-f production, Cd+2, Cu+2, Ga+3, and Ni+2 showed significantly lower TC50 values with increasing time of exposure, whereas the TC50 values for Ag+1 and Zn+2 remained constant. The TC50 values using 3H-Tdr incorporation exhibited a similar pattern with time of exposure, but the effects were less pronounced. The TC50 values for 3H-Tdr and MTT-f tended to equalize at 72 h. All combinations of cations tested (Ag-Cu, Ag-Zn, Ag-Ni, Cu-Zn, Cu-Ni, Ga-Ni, and Cu-Cd) exhibited synergistic and antagonistic effects as measured by MTT-f production. Synergistic and antagonistic effects were not necessarily mutually exclusive in the same system.

3T3 Cells↗

PubMed1992

Precision of and new methods for testing in vitro alloy cytotoxicity.

Previous studies have utilized in vitro alloy cytotoxicity tests to evaluate dental casting alloys. The purposes of this study were to: (1) evaluate the precision of the optical density and visual tests previously used, (2) evaluate a new test measuring absorbance of solubilized formazan dyes, and (3) test the correlation between these tests for cytotoxicity. Balb/c 3T3 cells were plated in 24-well culture trays at 25,000 cells/cm2 around ten types of dental casting alloys (six samples/alloy) and incubated for 72 h. Cells were histochemically stained with MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide)/succinate for 2 h, then fixed, washed, and dried. Toxicity was measured by optical densitometer (OD) scanning, visual assessment, and 560-nm absorbance of DMSO-solubilized dyes. Measurements of rings of inhibition were not used, because they did not provide precise data, and correlated poorly with the other methods. The results were analyzed by ANOVA, Tukey intervals, and coefficients of variation (CV's). MTT required shorter incubation times for adequate staining, allowed for solubilization of the monolayers, and was less expensive than NBT (2,2'-di-p-nitro-phenyl-5,5'-diphenyl-3,3'-dimethoxy-[3,3'-dimethoxy-4,4 '-biphenylene] ditetrazolium chloride). Results showed that all three methods ranked alloy toxicities similarly (p = 0.05). The solubilization method was most discriminating due to lower CV's. Correlation between densitometer and solubilization methods was excellent (R2 = 0.96). Between-experiment CV's were generally less than 20%, and often less than 10%. Between-sample CV's were generally less than 20%.(ABSTRACT TRUNCATED AT 250 WORDS)

Analysis of Variance↗

PubMed1992

Delineation of cytotoxic concentrations of two dentin bonding agents in vitro.

Until adhesiveness of dentin bonding agents and other restorative materials to dental structures can be assured, microleakage into resulting "gaps" and dentin permeability will remain major concerns in cases of pulpal irritation. The objectives of the present study were to (a) delineate the kinds and levels of metabolic cytotoxicity of the GLUMA and Scotchbond 2 systems as well as glutaraldehyde and 2-hydroxyethylmethacrylate, and (b) compare the effects of these same materials after diffusion through dentin discs approximately 0.5-mm thick. In monolayer cultures, glutaraldehyde was much more cytotoxic than 2-hydroxyethylmethacrylate. However, GLUMA sealer and Scotchbond 2 adhesive exhibited similar cytotoxicity in monolayer cultures. After diffusion through dentin, glutaraldehyde and 2-hydroxyethylmethacrylate effects were diluted 14.7 and 26.7 times, respectively. The postdiffusional effects of the GLUMA and Scotchbond 2 systems were not significantly different and less than those effects in monolayer cultures. This study should help in the evaluation of possible causes of pulpal irritation following restorative procedures.

3T3 Cells↗

PubMed1992

The effects of cleaning on the kinetics of in vitro metal release from dental casting alloys.

The kinetics of the release of elements from six dental casting alloys into cell-culture medium was assessed by means of atomic absorption spectroscopy. Alloys were evaluated in the polished and polished-cleaned conditions so that the effects of cleaning could be determined. Auger scanning microscopy was used for analysis of the surfaces of selected alloys before and after exposure to the cell-culture medium. Release patterns for each element were characterized by the shape of the dissolution vs. time curve, concentration of the element at 12 h as a percentage of the 72-hour concentration, and the relative slope of the curve from 48 to 72 h. Three patterns of release were observed for elements in these alloys. Type I patterns had logarithmic shapes with relatively large 12-hour concentrations and low 48-72-hour slopes. Type II patterns had logarithmic shapes but with moderate 12-hour concentrations and 48-72-hour slopes. Type III patterns were polynomial in shape, had relatively low 12-hour concentrations, and had large 48-72-hour slopes. Cleaning did not change the pattern of release but did generally significantly decrease the quantities of elements released (p = 0.05). The type of dissolution vs. time curve appeared to be dependent upon the element and the composition of the alloy. When cleaning reduced dissolution, surface analyses showed that the cleaning process increased the abundance of elements such as Au and Pd and reduced the abundance of Ag and Cu. Elements which were released from the alloys were more abundant on the surface than in the bulk in both polished and polished-cleaned conditions.(ABSTRACT TRUNCATED AT 250 WORDS)

Cadmium↗

PubMed1991

Cytotoxicity of a BIS-GMA dental composite before and after leaching in organic solvents.

Cell culture techniques were used to determine the source of cytotoxic agents in a commercial BIS-GMA composite. The material was polymerized according to the manufacturer's directions and leachable components were removed by room temperature extraction in ethanol, chloroform, or toluene. The leachable components in the extracts were identified using infrared spectrographic analysis. Thin layer chromatographic analysis was used to determine the number of constituents. These constituents were separated by gas chromatography and then identified by mass spectrographic analysis. Succinic dehydrogenase activity and radioactive labeling with tritiated leucine were used to evaluate cell metabolism and protein synthesis, respectively. The infrared analysis of the extracts showed that the primary component was unreacted BIS-GMA. Trace amounts of 2-hydroxy-4-methoxy-benzophenone, a light stabilizer, as well as a phenyl ester of benzoic acid which was probably degraded from BIS-GMA, were detected by the mass spectrographic method. The removal of leachable components caused a 90% decrease in toxicity compared to the nonextracted BIS-GMA samples. The extracted BIS-GMA samples showed no cellular response compared to the Teflon negative control.

Animals↗