PubMed Health⌕ Search

Biomedical subjects

C Toyoshima

Publications and source records attributed to C Toyoshima.

At least 19 recordsLinked to original sources
PubMed2001

Organization of cytoplasmic domains of sarcoplasmic reticulum Ca(2+)-ATPase in E(1)P and E(1)ATP states: a limited proteolysis study.

In order to characterize the domain organization of sarcoplasmic reticulum Ca(2+)-ATPase in different physiological states, limited proteolysis using three proteases (proteinase K (prtK), V8 and trypsin) was conducted systematically and quantitatively. The differences between E(2) and E(2)P were examined in our previous study and E(2)P was characterized by the complete resistance to all three proteases (except for trypsin attack at the very top of the molecule (T1 site)). The same strategies were employed in this study for E(1)ATP, E(1)PADP and E(1)P states. Because of the transient nature of these states, they were either stabilized by non-hydrolyzable analogues or made predominant by adjusting buffer conditions. Aluminum fluoride (without ADP) was found to stabilize E(1)P. All these states were characterized by strong (E(1)ATP) to complete (E(1)PADP and E(1)P) resistance to prtK and to V8 but only weak resistance to trypsin at the T2 site. Because prtK and V8 primarily attack the loops connecting the A domain to the transmembrane helices whereas the trypsin T2 site (Arg(198)) is located on the outermost loop in the A domain, these results lead us to propose that the A domain undergoes a large amount of rotation between E(1)P and E(2)P. Combined with previous results, we demonstrated that four states can be clearly distinguished by the susceptibility to three proteases, which will be very useful for establishing the conditions for structural studies.

Adenosine Monophosphate↗
PubMed2001

The role of the M6-M7 loop (L67) in stabilization of the phosphorylation and Ca(2+) binding domains of the sarcoplasmic reticulum Ca(2+)-ATPase (SERCA).

The amino acid sequence (L67) intervening between the M6 and M7 transmembrane segments of the Ca(2+) transport ATPase was subjected to mutational analysis. Mutation of Pro(820) to Ala interferes with protein expression even though transcription occurs at normal levels. Single mutations of Lys(819) or Arg(822) to Ala, Phe, or Glu allow good expression, but produce strong inhibition of ATPase activity. The main defect produced by these mutations is strong interference with enzyme phosphorylation by ATP in the presence of Ca(2+), and also by P(i) in the absence of Ca(2+). The Lys(819) and Arg(822) mutants undergo slight and moderate reduction of Ca(2+) binding affinity, respectively. Reduction of overall steady state ATPase velocity is then due to inhibition of phosphorylated intermediate formation. On the other hand, a cluster of conservative mutations of Asp(813), Asp(815), and Asp(818) to Asn interferes strongly with enzyme activation by Ca(2+) binding and formation of phosphorylated enzyme intermediate by utilization of ATP. Enzyme phosphorylation by Pi in the absence of Ca(2+) undergoes slight or no inhibition by the triple aspartate mutation. Therefore, the triple mutation interferes mainly with the calcium-dependent activation of the ATPase. The effect of the triple mutation can be to a large extent reproduced by single mutation of Asp(813) (but not of Asp(815) or Asp(818)) to Asn. Functional and structural analysis of the experimental data demonstrates that the L67 loop plays an important role in protein folding and function. This role is sustained by linking the cytosolic catalytic domain and the transmembrane Ca(2+) binding domain through a network of hydrogen bonds.

Animals↗
PubMed2001

ADP-insensitive phosphoenzyme intermediate of sarcoplasmic reticulum Ca(2+)-ATPase has a compact conformation resistant to proteinase K, V8 protease and trypsin.

Sarcoplasmic reticulum Ca(2+)-ATPase was digested with proteinase K, V8 protease and trypsin in the absence of Ca(2+). Unphosphorylated enzyme was rapidly degraded. In contrast, ADP-insensitive phosphoenzyme formed with P(i) and phosphorylated state analogues produced by the binding of F(-) or orthovanadate, were almost completely resistant to the proteolysis except for tryptic cleavage at the T1 site (Arg(505)). The results indicate that the phosphoenzyme and its analogues have a very compact form in the cytoplasmic region, being consistent with large domain motions (gathering of three cytoplasmic domains). Results further show that the structure of the enzyme with bound decavanadate is very similar to ADP-insensitive phosphoenzyme. Thapsigargin did not affect the changes in digestion time course induced by the formation of the phosphorylated state analogues.

Adenosine Diphosphate↗
PubMed2000

Structural comparison of dimeric Eg5, Neurospora kinesin (Nkin) and Ncd head-Nkin neck chimera with conventional kinesin.

Cryo-electron microscopy and 3D image reconstruction of microtubules saturated with kinesin dimers has shown one head bound to tubulin, the other free. The free head of rat kinesin sits on the top right of the bound head (with the microtubule oriented plus-end upwards) in the presence of 5'-adenylylimido-diphosphate (AMPPNP) and on the top left in nucleotide-free solutions. To understand the relevance of this movement, we investigated other dimeric plus-end-directed motors: Neurospora kinesin (Nkin); Eg5, a slow non-processive kinesin; and a chimera of Ncd heads attached to Nkin necks. In the AMPPNP (ATP-like) state, all dimers have the free head to the top right. In the absence of nucleotide, the free head of an Nkin dimer appears to occupy alternative positions to either side of the bound head. Despite having the Nkin neck, the free head of the chimera was only seen to the top right of the bound head. Eg5 also has the free head mostly to the top right. We suggest that processive movement may require kinesins to move their heads in alternative ways.

Adenosine Triphosphate↗
PubMed2000

Distinct topologies of mono- and decavanadate binding and photo-oxidative cleavage in the sarcoplasmic reticulum ATPase.

UV irradiation of the sarcoplasmic reticulum (SR) ATPase in the presence of vanadate cleaves the enzyme at either of two different sites. Under conditions favoring the presence of monovanadate, and in the presence of Ca(2+), ADP, and Mg(2+), cleavage results in two fragments of 71- and 38-kDa electrophoretic mobility. On the other hand, under conditions permitting formation of decavanadate, and in the absence of Ca(2+) and ADP, cleavage results in two fragments of 88- and 21-kDa electrophoretic mobility. The amino terminus resulting from cleavage is blocked and resistant to Edman degradation. However, the initial photo-oxidation product can be reduced with NaB(3)H(4,) resulting in incorporation of radioactive (3)H label. Extensive digestion of the labeled protein with trypsin then yields labeled peptides that are specific for the each of the photo-oxidation conditions, and can be sequenced after purification. Collection of the Edman reaction fractional products reveals the radioactive label and demonstrates that Thr(353) is the residue oxidized by monovanadate at the phosphorylation site (i.e. Asp(351)). Correct positioning of monovanadate at the phosphorylation site requires binding of Mg(2+) and ADP to the Ca(2+)-dependent conformation of the enzyme. Subsequent hydrolytic cleavage is likely assisted by the neighboring Asp(601), and yields the 71- and 38-kDa fragments. On the other hand, Ser(186) (and possibly the following three residues: Val(187), Ile(188), and Lys(189)) is the residue that is photo-oxidized by decavanadate in the absence of ADP. Hydrolytic cleavage of the oxidized product at this site is likely assisted by neighboring acidic residues, and yields the 88- and 21-kDa fragments. The bound decavanadate, which we find to produce steric interference with TNP-AMP binding, must therefore extend to the A domain (i.e. small cytosolic loop) in order to oxidize Ser(186). This protein conformation is only obtained in the absence of Ca(2+).

Adenosine Diphosphate↗
PubMed2000

Detailed characterization of the cooperative mechanism of Ca(2+) binding and catalytic activation in the Ca(2+) transport (SERCA) ATPase.

Expression of heterologous SERCA1a ATPase in Cos-1 cells was optimized to yield levels that account for 10-15% of the microsomal protein, as revealed by protein staining on electrophoretic gels. This high level of expression significantly improved our characterization of mutants, including direct measurements of Ca(2+) binding by the ATPase in the absence of ATP, and measurements of various enzyme functions in the presence of ATP or P(i). Mutational analysis distinguished two groups of amino acids within the transmembrane domain: The first group includes Glu771 (M5), Thr799 (M6), Asp800 (M6), and Glu908 (M8), whose individual mutations totally inhibit binding of the two Ca(2+) required for activation of one ATPase molecule. The second group includes Glu309 (M4) and Asn796 (M6), whose individual or combined mutations inhibit binding of only one and the same Ca(2+). The effects of mutations of these amino acids were interpreted in the light of recent information on the ATPase high-resolution structure, explaining the mechanism of Ca(2+) binding and catalytic activation in terms of two cooperative sites. The Glu771, Thr799, and Asp800 side chains contribute prominently to site 1, together with less prominent contributions by Asn768 and Glu908. The Glu309, Asn796, and Asp800 side chains, as well as the Ala305 (and possibly Val304 and Ile307) carbonyl oxygen, contribute to site 2. Sequential binding begins with Ca(2+) occupancy of site 1, followed by transition to a conformation (E') sensitive to Ca(2+) inhibition of enzyme phosphorylation by P(i), but still unable to utilize ATP. The E' conformation accepts the second Ca(2+) on site 2, producing then a conformation (E' ') which is able to utilize ATP. Mutations of residues (Asp813 and Asp818) in the M6/M7 loop reduce Ca(2+) affinity and catalytic turnover, suggesting a strong influence of this loop on the correct positioning of the M6 helix. Mutation of Asp351 (at the catalytic site within the cytosolic domain) produces total inhibition of ATP utilization and enzyme phosphorylation by P(i), without a significant effect on Ca(2+) binding.

Adenosine Triphosphate↗
PubMed2000

Crystal structure of the calcium pump of sarcoplasmic reticulum at 2.6 A resolution.

Calcium ATPase is a member of the P-type ATPases that transport ions across the membrane against a concentration gradient. Here we have solved the crystal structure of the calcium ATPase of skeletal muscle sarcoplasmic reticulum (SERCA1a) at 2.6 A resolution with two calcium ions bound in the transmembrane domain, which comprises ten alpha-helices. The two calcium ions are located side by side and are surrounded by four transmembrane helices, two of which are unwound for efficient coordination geometry. The cytoplasmic region consists of three well separated domains, with the phosphorylation site in the central catalytic domain and the adenosine-binding site on another domain. The phosphorylation domain has the same fold as haloacid dehalogenase. Comparison with a low-resolution electron density map of the enzyme in the absence of calcium and with biochemical data suggests that large domain movements take place during active transport.

Adenosine Triphosphate↗
PubMed2000

Soluble P-type ATPase from an archaeon, Methanococcus jannaschii.

MJ0968 has been proposed to be an ancestor of P-type ATPase, because its primary structure is highly homologous to that of the core catalytic domain of P-type ATPase. However it completely lacks amino acid sequences that possibly constitute transmembrane domains. To examine if MJ0968 is indeed a P-type ATPase, it was overexpressed in Escherichia coli and purified. It did show ATPase activity, autophosphorylation and inhibition by vanadate. All these properties support the idea that MJ0968 is indeed a soluble P-type ATPase.

Adenosine Triphosphatases↗
PubMed2000

Structure determination of tubular crystals of membrane proteins. III. Solvent flattening.

Solvent flattening is considered to be a principal means for improving the data quality in X-ray crystallography. It could be equally effective for tubular crystals of membrane proteins imaged by electron microscopy because of the large empty space inside the tubes. However, tubular crystals are difficult objects for solvent flattening due to lack of electron diffraction amplitudes. Therefore, solvent flattening was used to align images more accurately and to improve the completeness of the data by reducing contributions of noise in the solvent (+ lipid) region. The methods developed were tested with the tubular crystals of Ca2+-ATPase embedded in amorphous ice. The improvement of the data quality was remarkable when solvent flattening was applied to many individual images before averaging. In this way, noises contaminated in the protein region by contrast transfer function were removed effectively. Solvent flattening was far more powerful than simple averaging described in Part II of this series (K. Yonekura, C. Toyoshima, Ultramicroscopy 84 (2000) 15).

Calcium-Transporting ATPases↗
PubMed2000

Structure determination of tubular crystals of membrane proteins. II. Averaging of tubular crystals of different helical classes.

A set of programs has been developed for averaging the data from tubular crystals belonging to different helical classes. This was done either by (i) cutting out molecules constituting a unit cell from density maps, and aligning and averaging them in real space; (ii) transforming the densities in a unit cell to layer-line data according to a (possibly artificial) helical symmetry, aligning and averaging them in reciprocal space. These methods were applied to tubular crystals of Ca2+-ATPase. Either method worked well and substantially improved the data quality. Transforming the reconstructed images to the layer-line data has many advantages and is essential for fully exploiting the power of averaging.

Calcium-Transporting ATPases↗
PubMed2000

Structure determination of tubular crystals of membrane proteins. I. Indexing of diffraction patterns.

Indexing of diffraction patterns is the starting point of every crystallographic analysis. The diffraction patterns from helical particles consist of a series of layer-planes, the indexing of which involves the assignment of the start numbers of the helices that contribute to the layer-planes. The indexing could be challenging if the diameter of the helical particle is large and if the conventional indexing methods based on selection rule is used. Presented here is a tutorial on how to index them using (h, k; n) indexing method, which is particularly useful for tubular crystals of membrane proteins.

Calcium-Transporting ATPases↗
PubMed1998

Structure of the calcium pump from sarcoplasmic reticulum at 8-A resolution.

The calcium pump from sarcoplasmic reticulum (Ca2+-ATPase) is typical of the large family of P-type cation pumps. These couple ATP hydrolysis with cation transport, generating cation gradients across membranes. Ca2+-ATPase specifically maintains the low cytoplasmic calcium concentration of resting muscle by pumping calcium into the sarcoplasmic reticulum; subsequent release is used to initiate contraction. No high-resolution structure of a P-type pump has yet been determined, although a 14-A structure of Ca2+-ATPase, obtained by electron microscopy of frozen-hydrated, tubular crystals, showed a large cytoplasmic head connected to the transmembrane domain by a narrow stalk. We have now improved the resolution to 8A and can discern ten transmembrane alpha-helices, four of which continue into the stalk On the basis of constraints from transmembrane topology, site-directed mutagenesis and disulphide crosslinking, we have made tentative assignments for these alpha-helices within the amino-acid sequence. A distinct cavity leads to the putative calcium-binding site, providing a plausible path for calcium release to the lumen of the sarcoplasmic reticulum.

Amino Acid Sequence↗
PubMed1998

Three-dimensional electron microscopy of the photosystem II core complex.

A three-dimensional image of the spinach photosystem II core complex composed of CP47, D1, D2, cytochrome b-559, and psbI gene product was reconstructed at 20-A resolution from the two-dimensional crystals negatively stained with phosphotungstate. Confirming the previous proposal, the crystal had a p22121 symmetry. One PSII core complex was measured to be 80 x 80 A in the membrane plane and 88 A normal to it. The mass distribution was asymmetric about the lipid bilayer, consistent with predictions from the amino acid sequences. The lumenal mass consisted of three domains forming a characteristic triangular platform with another domain on top of it. Three stromal domains were smaller and linearly arranged. Due to strong stain exclusion in the hydrophobic core part of the lipid bilayer, the transmembrane region appeared to be imaged with a reversed contrast. Inverting the contrast resulted in a reasonable density distribution for that part. Thus, though the information on the transmembrane region is limited, the domain structure of the PSII core complex was revealed and allowed us to propose a model for the arrangement of subunits in the PSII core complex.

Crystallization↗
PubMed1998

Structure of the Ca2+ pump of sarcoplasmic reticulum: a view along the lipid bilayer at 9-A resolution.

We have used multilamellar crystals of the ATP-driven calcium pump from sarcoplasmic reticulum to address the structural effects of calcium binding to the enzyme. They are stacks of disk-shaped two-dimensional crystals. A density map projected along the lipid bilayer was obtained at 9-A resolution by frozen-hydrated electron microscopy. Although only in projection, much more details of the structure were revealed than previously available, especially in the transmembrane region. Quantitative comparison was made with the model obtained from the tubular crystals of this enzyme formed in the absence of calcium. Unexpectedly large differences in conformation were found, particularly in the cytoplasmic domain.

Animals↗
PubMed1997

The ATP-binding site of Ca(2+)-ATPase revealed by electron image analysis.

The location of the ATP-binding site of a P-type ion pump, Ca(2+)-ATPase from rabbit sarcoplasmic reticulum, was examined by cryoelectron microscopy. A nonhydrolyzable analog of ATP, beta, gamma-bidentate chromium (III) complex of ATP (CrATP), was used to stabilize the enzyme in the Ca(2+)-occluded state. Tubular crystals were then induced by vanadate in the presence of EGTA, keeping CrATP bound to the enzyme. The three-dimensional structures of the crystals were determined at 14 A resolution by cryoelectron microscopy and helical image analysis. Statistical comparison of the structures with and without CrATP showed clear and significant differences at the groove proposed previously as the ATP-binding pocket.

Adenosine Triphosphate↗