PubMed Health⌕ Search

Biomedical subjects

C Yiu

Publications and source records attributed to C Yiu.

16 recordsLinked to original sources
PubMed2004

Collagen degradation by host-derived enzymes during aging.

Incompletely infiltrated collagen fibrils in acid-etched dentin are susceptible to degradation. We hypothesize that degradation can occur in the absence of bacteria. Partially demineralized collagen matrices (DCMs) prepared from human dentin were stored in artificial saliva. Control specimens were stored in artificial saliva containing proteolytic enzyme inhibitors, or pure mineral oil. We retrieved them at 24 hrs, 90 and 250 days to examine the extent of degradation of DCM. In the 24-hour experimental and 90- and 250-day control specimens, we observed 5- to 6-microm-thick layers of DCM containing banded collagen fibrils. DCMs were almost completely destroyed in the 250-day experimental specimens, but not when incubated with enzyme inhibitors or mineral oil. Functional enzyme analysis of dentin powder revealed low levels of collagenolytic activity that was inhibited by protease inhibitors or 0.2% chlorhexidine. We hypothesize that collagen degradation occurred over time, via host-derived matrix metalloproteinases that are released slowly over time.

Acid Etching, Dental↗
PubMed2004

In vivo and in vitro permeability of one-step self-etch adhesives.

Adhesive dentistry should effectively restore the peripheral seal of dentin after enamel removal. We hypothesize that non-rinsing, simplified, one-step self-etch adhesives are effective for minimizing dentin permeability after tooth preparation procedures. Crown preparations in vital human teeth were sealed with Adper Prompt, Xeno III, iBond, or One-Up Bond F. Epoxy resin replicas were produced from polyvinyl siloxane impressions for SEM examination. Dentin surfaces from extracted human teeth were bonded with these adhesives and connected to a fluid-transport model for permeability measurements and TEM examination. Dentinal fluid droplets were observed from adhesive surfaces in resin replicas of in vivo specimens. In vitro fluid conductance of dentin bonded with one-step self-etch adhesives was either similar to or greater than that of smear-layer-covered dentin. TEM revealed water trees within the adhesives that facilitate water movement across the polymerized, highly permeable adhesives. Both in vitro and in vivo results did not support the proposed hypothesis.

Acid Etching, Dental↗
PubMed2001

Ultrastructural study of a glass ionomer-based, all-in-one adhesive.

OBJECTIVE: Reactmer Bond (Shofu Inc., Kyoto, Japan) is a glass ionomer (GI) based, tri-curable, all-in-one, filled adhesive. Both fluoroaluminosilicate glass (FASG) and fully pre-reacted glass (F-PRG) are used as fillers. This study examined the ultrastructure and elemental composition of resin-dentine interfaces that were treated with this adhesive. METHODS: Dentine disks prepared from human third molars were abraded with either 600- or 60-grit SiC paper to create smear layers of different thickness. They were bonded using Reactmer Bond. Cryo-fractured dentine surfaces devoid of smear layers were also bonded by chemical-activation and GI reaction without additional light-activation, or allowing the GI reaction to proceed for 1min before the adhesive was applied and light-activated. Undemineralised and demineralised sections were processed for TEM examination and STEM/EDX analysis. RESULTS: Resin-dentine interface from specimens with smear layers consisted of a mineral-dense surface layer that resided on top of a partially demineralised dentine. The partially demineralised zone was considerably thicker in the 600-grit than the 60-grit specimens. In smear layer-free specimens that were cured by chemical-activation/GI modes only, the surface layer concurred with the partially demineralised zone, and appeared as an electron-dense layer over the undemineralised intact dentine. Smear layer-free specimens that were cured by the light-activation of the partially neutralised adhesive contained incomplete amorphous surface layers only. Apart from colloidal silica, FASG fillers were the predominant filler type within the resin matrices. Peripheral hydrogel layers that contained electron-dense "seeds" were found around the FASG fillers. F-PRG fillers were only sparsely observed. In specimens that were laboratory demineralised with formic acid, phase separation of the unstained resin matrices into electron-dense and electron-lucent domains occurred. Artefactual dendritic deposits were found within the electron-dense domains. CONCLUSIONS: The presence of a surface interaction layer on top of a partially demineralised zone along the resin-dentine interface suggests that either a GI-type reaction or precipitation of insoluble carboxylate salts around remnant apatite crystallites may occur when this single-step adhesive interacts with dentine. Appearance of artefactual dendritic deposits suggests that continuous ion movement is possible within the hydrophilic portion of the resin matrix in this fluoride-releasing adhesive.

Aluminum Compounds↗
PubMed2000

Evaluation of treatment and posttreatment changes of protraction facemask treatment using the PAR index.

The purpose of this study was to use the Peer Assesment Rating (PAR) index score to evaluate the treatment and posttreatment changes of Class III patients treated by protraction facemask. The sample consisted of 20 Chinese children, 6 to 11 years old, with Class III skeletal malocclusion who had been treated with maxillary expansion and a protraction facemask. The average treatment time was 8.2 months, followed by 1 year of retention with a Class III functional appliance. Study casts were taken pretreatment (T1), posttreatment (T2), 1 year follow-up (T3), and 2 years follow-up (T4). After treatment, PAR scores were calculated for each time period. Differences among the 4 time periods were analyzed with the Wilcoxin matched-pairs test. Significant reductions in PAR scores were found at T2 (56%), T3 (70%), and T4 (63%) compared with T1. Immediately posttreatment (T2), 17 (85%) of 20 patients had improved PAR scores by a reduction of at least 30%. Reductions were caused primarily by correction of the anterior crossbite. One year after treatment (T3), further reductions in PAR score were noted (P <.01) as a result of better alignment of the anterior segment, improvement of the buccal occlusion, and overbite and midline corrections. Two years after treatment (T4), PAR scores were higher than at the previous time period. The increases were due to relapses in overjet (4 of 20 patients), overbite, and centerline corrections. These results indicate that significant reductions in the severity of Class III malocclusion can be achieved with early orthopedic facemask treatment. In most cases, further improvement in the PAR score can be expected 1 and 2 years after treatment. In a few patients, the benefits of early treatment are negated by relapses in overjet, overbite, and centerline corrections during the follow-up period.

Child↗
PubMed1998

Cephalometric and occlusal changes following maxillary expansion and protraction.

A prospective clinical trial was conducted to determine the cephalometric and occlusal changes following maxillary expansion and protraction. Twenty Southern Chinese patients (eight males and 12 females with a mean age of 8.4 +/- 1.8 years) with skeletal Class III malocclusions were treated consecutively with maxillary expansion and a protraction facemask. Growth adaptation of these patients was followed for 2 years after removal of the appliances and compared with a control group of subjects with no treatment. Lateral cephalometric radiographs were used to quantify the skeletal and dental changes before treatment (T1), immediately after treatment (T2) and 2 years after removal of appliances (T3). With 8 months of treatment (T2-T1), overjet was overcorrected from a -2.0 to 3.5 mm. The maxilla moved forwards by an average of 2.1 mm and the molar relationship was improved to a Class I dental arch relationship. The palatal and occlusal planes were tilted upward 1.0 and 2.0 degrees, respectively. Two years following removal of the appliances (T3-T2), a positive overjet was maintained in 18 out of 20 patients. The maxilla continued to move forwards in the treated subjects similar to the controls. The mandible outgrew the maxilia. In most instances, dental compensation with proclination of the maxillary incisors was observed. The palatal plane returned to pre-treatment value. The occlusal plane continued to tilt upward due to eruption of the molars and proclination of the incisors. Analysis of dental casts showed a significant increase in maxillary intercanine (2.2 mm) and intermolar widths (2.3 mm) with 7 days of rapid palatal expansion followed by maxillary protraction. The percentage relapse in maxillary intermolar widths was 30-45 per cent after 1 year, in most cases with minimal retention. In the mandibular arch, the concurrent increase in intermolar width (2.3 mm) was primarily due to buccal uprighting of the posterior molars when the maxilla was protracted into a Class I skeletal relationship and was stable after 1 year. The results of this study indicate stability of orthopaedic treatment of Class III malocclusions directed at the maxilla. Despite some relapse, a net improvement in maxillomandibular relationship and a positive overjet was maintained in 18 out of 20 patients at the end of the follow-up period.

Cephalometry↗
PubMed1998

Pilomotor seizures.

We report pilomotor seizures in two patients who had piloerection or gooseflesh spreading in a pattern like the 'Jacksonian march', confined ipsilaterally to the lesion side. The first patient presented this in conjunction with complex partial seizures. Left anterior temporal lobectomy abolished pilomotor and other seizures. Pathological study demonstrated hippocampal sclerosis. A meningioma near the left sphenoid region, incompletely removed, is the likely cause of pilomotor seizures in the second patient. Carbamazepine reduced these attacks. To our knowledge, hippocampal sclerosis and meningioma have never been linked to pilomotor seizures.

Adult↗
PubMed1997

Timing for effective application of anteriorly directed orthopedic force to the maxilla.

Class III malocclusion with retrusive maxilla can be orthopedically corrected in the deciduous and mixed dentition, with reverse-pull headgear in combination with rapid palatal expansion. The literature recommends this procedure be carried out before the patient is 8 years old to obtain the optimal orthopedic result. This statement, however, has not been supported by scientific data. The current study examined the treatment effects of patients younger than 8 years old (5 to 8 years) and patients older than 8 years old (9 to 12 years). Thirty patients treated with maxillary protraction and expansion in the Department of Children's Dentistry and Orthodontics, University of Hong Kong were included in this study. Cephalometric radiographs were taken 6 months before the initiation of treatment (T(0)), at the initiation of treatment (T1), and after 6 months of treatment (T2). In this way, (T(2)-T1) represented cephalometric changes during the treatment period and (T1-T0) represented 6 months of growth changes without treatment. Experimental subjects served as their own control in this study. A grid system consisting of maxillary occlusal plane (OL) and a line perpendicular to OL through sella (OLp) was used for linear measurements. A total of 15 linear and 3 angular cephalometric measurements were made. A multivariate analysis of variance (MANOVA), which used age and treatment time as its factors, was used to determine effect of age and/or treatment on each cephalometric parameter. Results indicated strikingly similar therapeutic response between the younger and older age groups. These data suggest that similar skeletal response can be obtained when maxillary protraction was started either before age 8 (5 to 8 years) or after age 8 years (8 to 12 years).

Aging↗
PubMed1997

Treatment response and long-term dentofacial adaptations to maxillary expansion and protraction.

The purpose of this article is to summarize the short-term and long-term results of the authors' clinical prospective study on the treatment of Class III malocclusion using the protraction facemask. An attempt is made to answer questions pertaining to this treatment modality. Twenty patients with skeletal Class III malocclusion were treated consecutively with maxillary expansion and a protraction facemask. A positive overjet was obtained in all cases after 6 to 9 months of treatment. These changes were contributed to by a forward movement of the maxilla, backward and downward rotation of the mandible, proclination of the maxillary incisors, and retroclination of the mandibular incisors. The molar relationship was overcorrected to Class I or Class II dental arch relationship. The overbite was reduced with a significant increase in lower facial height. The treatment was found to be stable 2 years after removal of the appliances. At the end of the 4-year observation period, 15 of the 20 patients maintained a positive overjet or an end-to-end incisal relationship. Patients who reverted back to a negative overjet were found to have excess horizontal mandibular growth that was not compensated by proclination of the maxillary incisors. A review of the literature showed that maxillary expansion in conjunction with protraction produced greater forward movement of the maxilla. Maxillary protraction with a 30 degrees forward and downward force applied at the canine region produced an acceptable clinical response. The reciprocal force from maxillary protraction transmitted to the temporomandibular joint did not increase masticatory muscle pain or activity. Significant soft tissue profile change can be expected with maxillary protraction including straightening of the facial profile and better lip competence and posture. However, one should anticipate individual variations in treatment response and subsequent growth changes. Treatment with the protraction facemask is most effective in Class III patients with a retrusive maxilla and a hypodivergent growth pattern. Treatment initiated at the time of initial eruption of the upper central incisors helps to maintain the anterior occlusion after treatment.

Adaptation, Physiological↗
PubMed1997

Masticatory muscle pain before, during, and after treatment with orthopedic protraction headgear: a pilot study.

Protraction headgear has been used in conjunction with a palatal expansion appliance to correct Class III malocclusion with maxillary deficiency and/or mandibular prognathism. In general, 800 gm of orthopedic force is used to protract the maxilla, and 75% of this force is transmitted to the temporomandibular joint (TMJ) area via the mandible. The effect of this heavy intermittent force on the TMJ has not been reported in the literature. The objectives of this study were to determine the level of masticatory muscle pain and EMG activity in patients treated with maxillary protraction headgear. Ten patients with skeletal Class III malocclusion whose treatment plan called for maxillary protraction headgear treatment participated in this study. Nocturnal masticatory muscle activity was determined using a portable electromyographic (EMG) recording device. Subjects wore the EMG device 14 nights before treatment, 14 nights during treatment, and 14 nights 1 month after active treatment. Masticatory muscle pain level was determined by muscle palpation, scored on a scale of 0 to 3 each period, according to the method of Gross and Gale. The examiner followed a sequence outlined by Burch to examine the masticatory muscles. Results showed no significant differences for masticatory muscle activities before, during, and after treatment. Only a few patients experienced level 1 masticatory pain during treatment. None of the patients experienced masticatory muscle pain 1 month after treatment. These results demonstrate no significant increase in masticatory muscle activity or muscle pain associated with orthopedic treatment using maxillary protraction headgear.

Adolescent↗
PubMed1997

Cephalometric comparisons of Chinese and Caucasian surgical Class III patients.

Pretreatment cephalometric radiographs of 30 Chinese and 30 Caucasian surgical Class III patients were studied to determine if there were skeletal and soft tissue morphology differences between the groups. Nineteen hard tissue and 13 soft tissue measurements were traced and digitized. A two-sample t test was used to analyze sex and ethnic differences between groups. A significant difference between sexes was found in the linear skeletal measurements but not in the angular measurements for both ethnic groups. Ethnic differences were found in the anterior cranial base measurement, which was significantly shorter in the Chinese sample. In addition, a larger posterior cranial base, a smaller gonial angle, and an increase in mandibular length contributed to the increase in mandibular prognathism found in the Chinese sample. Few differences between sexes were found in the soft tissue measurements. However, ethnic differences were found in maxillary and mandibular soft tissue prognathism, upper and lower lip protrusion, and nasolabial angle, which reflected the more severe underlying skeletal disharmony in the Chinese sample. When the surgical samples were compared to a reference population, an increase in skeletal measurements was found with the Chinese sample in maxillary and mandibular prognathism and dentoalveolar protrusion. Soft tissue maxillary prognathism and upper lip protrusion were found to be smaller than the reference population in the Caucasian sample but greater in the Chinese sample.

Adolescent↗
PubMed1996

Cephalometric A point changes during and after maxillary protraction and expansion.

The purpose of this study was to analyze the treatment and posttreatment maxillary changes achieved with maxillary protraction therapy. The cephalometric records of 25 consecutively treated Chinese children with Class III malocclusions (mean age 8.4 years) were analyzed for cephalometric A point changes, which were then compared with an untreated, age and sex matched Class III control sample. A cephalometric maxillary superimposition technique was used to differentiate between the skeletal and the local contributions to the total A point change. Results showed that 6 months of maxillary protraction therapy produced a mean A point advancement of 2.4 mm compared with 0.2 mm in the control group. Of this advancement, 75% was found to be due to skeletal maxillary advancement and 25% was attributed to local remodeling. Significantly less downward movement of A point was found with treatment compared with the controls, which could be related to the direction of force application. No significant differences were found in the horizontal and the vertical movements of A point between the treatment and the control groups during the 12-month posttreatment period, indicating stability of early maxillary protraction in patients with Class III malocclusions.

Case-Control Studies↗
PubMed1996

Soft tissue and dentoskeletal profile changes associated with maxillary expansion and protraction headgear treatment.

One of the goals of early treatment of Class III malocclusion with maxillary expansion and protraction headgear is to significantly improve the dentofacial profile. The objectives of the present study were to determine (1) the interrelationships of the soft tissue and dentoskeletal profiles after maxillary expansion and protraction headgear treatment and (2) which cephalometric variables could contribute to an accurate prediction of the protraction effect on the soft tissue profile. Lateral cephalometric radiographs of 20 consecutively treated Class III patients (10 males, 10 females) by protraction headgear were included in this study. Their ages at the start of protraction headgear treatment ranged from 6 to 11 years, with an average of 8.1 +/- 2.1 years. None of the patients had previous orthodontic treatment. For each patient, the first lateral cephalogram was taken 6 months before the initiation of headgear treatment (T0), and the second radiograph at the start of treatment (T1). Therefore (T1-T0) represented 6 months of growth with no treatment. A third radiograph was taken 6 months after start of treatment (T2). In this way, (T2-T1)-(T1-T0) represented the effect the result of appliance therapy alone and each subject served as his/her own control. A computerized cephalometric analysis was used including variables assessing sagittal and vertical relationships of skeletal and soft tissue profiles, incisal relationships, soft tissue thickness, and lip structure. Data were analyzed by means of paired t tests, Pearson's product-moment coefficient correlation, and multiple regression analyses. The results showed significant improvements in dentofacial profile after 6 months of maxillary protraction. The skeletal and soft tissue facial profiles were straightened and the posture of the lips was improved. The normal incisal relationship (overjet) that was achieved had a significant impact on the soft tissues overlying both upper and lower incisors resulting in better lip competence and posture. Significant correlations were found between changes in the sagittal relationships of skeletal and soft tissue profiles in both the maxilla and the mandible (p < 0.05). The forward movement of the maxilla was accompanied by a corresponding forward movement of the soft tissue profile at 50% to 79% of the hard tissue. In the mandible, the downward and backward movements of the soft tissues were equivalent to 71% to 81% of the corresponding hard tissues. The lack of high r square values in the multiple regression analyses reflected a low prediction value for the maxillary variables, but moderately high prediction value for the mandibular variables that could be used in preorthopedic treatment planning. This study showed that significant dentoskeletal changes and improvements in dentofacial profile resulted from 6 months of treatment with maxillary expansion and protraction.

Cephalometry↗
PubMed1996

Treatment response to maxillary expansion and protraction.

A prospective clinical trial was conducted to determine the skeletal and dental contributions to the correction of overjet and overbite in Class III patients. Thirty patients (12 males and 18 females with a mean age of 8.4 +/- 1.7 years) were treated consecutively with protraction headgear and fixed maxillary expansion appliances. For each patient, a lateral cephalogram was taken 6 months before treatment (T0); immediately before treatment (T1); and 6 months after treatment (T2). The time period (T1-T0) represented changes due to 6 months of growth without treatment; (T2-T1) represented 6 months of growth and treatment. Each patient served as his/her own control. Cephalometric analysis described by Björk (1947) and Pancherz (1982a,b) was used. Sagittal and vertical measurements were made along the occlusal plane (OLs) and the occlusal plane perpendicular (OLp), and superimposed on the mid-sagittal cranial structure. The results revealed the following: with 6 months of treatment, all subjects were treated to Class I or overcorrected to Class I or Class II dental arch relationships. Overjet and sagittal molar relationships improved by an average of 6.2 and 4.5 mm, respectively. This was a result of 1.8 mm of forward maxillary growth, a 2.5-mm of backward movement of the mandible, a 1.7-mm of labial movement of maxillary incisors, a 0.2-mm of lingual movement of mandibular incisors, and a 0.2-mm of greater mesial movement of maxillary than mandibular molars. The mean overbite reduction was 2.6 mm. Maxillary and mandibular molars were erupted occlusally by 0.9 and 1.4 mm, respectively. The mandibular plane angle was increased by 1.5 degrees and the lower facial height by 2.9 mm. Individual variations in response to maxillary protraction was large for most of the parameters tested. Significant differences in treatment changes between male and female subjects were found only in the vertical eruption of mandibular incisors and maxillary and mandibular molars. These results demonstrate that significant overjet and overbite corrections can be obtained with 6 months of maxillary protraction in combination with a fixed expansion appliance.

Cephalometry↗
PubMed1980

The significance of 5'-nucleotide phosphodiesterase isozymes in the diagnosis of liver carcinoma.

The results of determination of the serum 5'-NPDase isozymes in 95 cases of primary liver carcinoma and other kinds of disease are presented. The 5'-NPDase-V was positive in 83.2% of primary liver cancer cases. This test might be a useful supplement to AFP determination, especially in AFP-negative liver cancer patients. In most patients who had undergone successful liver resection for primary carcinoma, the test became negative. A positive 5'NPDase-V test in patients with cancer elsewhere in the body may suggest liver metastasis. In addition, this test may be of some help in the differentiation of primary liver cancer from other kinds of liver disease. The problem of "false-positive" results of this test is discussed.

Diagnosis, Differential↗