PubMed Health⌕ Search

Biomedical subjects

Cameron Alexander

Publications and source records attributed to Cameron Alexander.

15 recordsLinked to original sources
PubMed2007

Synthesis and characterization of variable-architecture thermosensitive polymers for complexation with DNA.

Copolymers of N-isopropylacrylamide with a fluorescent probe monomer were grafted to branched poly(ethyleneimine) to generate polycations that exhibited lower critical solution temperature (LCST) behavior. The structures of these polymers were confirmed by spectroscopy, and their phase transitions before and after complexation with DNA were followed using ultraviolet and fluorescence spectroscopy and light scattering. Interactions with DNA were investigated by ethidium bromide displacement assays, while temperature-induced changes in structure of both polymers and polymer-DNA complexes were evaluated by fluorescence spectroscopy, dynamic light scattering, laser Doppler anemometry, and atomic force microscopy (AFM) in water and buffer solutions. The results showed that changes in polymer architecture were mirrored by variations in the architectures of the complexes and that the overall effect of the temperature-mediated changes was dependent on the graft polymer architecture and content, as well as the solvent medium, concentrations, and stoichiometries of the complexes. Furthermore, AFM indicated subtle changes in polymer-DNA complexes at the microstructural level that could not be detected by light scattering techniques. Uniquely, variable-temperature aqueous-phase AFM was able to show that changes in the structures of these complexes were not uniform across a population of polymer-DNA condensates, with isolated complexes compacting above LCST even though the sample as a whole showed a tendency for aggregation of complexes above LCST over time. These results indicate that sample heterogeneities can be accentuated in responsive polymer--DNA complexes through LCST-mediated changes--a factor that is likely to be important in cellular uptake and nucleic acid transport.

Acrylamides↗
PubMed2007

Enhanced gene expression through temperature profile-induced variations in molecular architecture of thermoresponsive polymer vectors.

BACKGROUND: Successful non-viral gene targeting requires vectors to meet two conflicting needs-strong binding to protect the genetic material during transit and weak binding at the target site to enable release. Responsive polymers could fulfil such requirements through the switching of states, e.g. the chain-extended coil to chain-collapsed globule phase transition that occurs at a lower critical solution temperature (LCST), in order to transport nucleic acid in one polymer state and release it in another. METHODS: The ability of new synthetic polycations based on poly(ethyleneimine) (PEI) with grafted neutral responsive poly(N-isopropylacrylamide) (PNIPAm) chains to condense DNA into particles with architectures varying according to graft polymer LCST was assessed using a combination of fluorescence spectroscopy, dynamic light scattering (DLS), zeta sizing, gel retardation and atomic force microscopy studies. Transfection assays were conducted under experimental conditions wherein the polymer components were able to cycle across their LCST. RESULTS: Two PEI-PNIPAm conjugate polymers with different LCSTs displayed coil-globule transitions when complexed to plasmid DNA, leading to variations in molecular architecture as shown by changes in emission maxima of an environment-sensitive fluorophore attached to the PNIPAm chains. Gel retardation assays demonstrated differences in electrophoretic mobilities of polymer-DNA complexes with temperatures below and above polymer LCSTs. Atomic force micrographs showed changes in the structures of polymer-DNA complexes for a polymer undergoing a phase transition around body temperature but not for the polymer with LCST outside this range. Transfection experiments in C2C12 and COS-7 cells demonstrated that the highest expression of transgene occurred in an assay that involved a 'cold-shock' below polymer LCST during transfection. CONCLUSIONS: Designed changes in thermoresponsive polycation vector configuration via temperature-induced phase transitions enhanced transgene expression. The results indicate that changes in molecular architecture induced by a carefully chosen stimulus during intracellular trafficking can be used to enhance gene delivery.

Acrylic Resins↗
PubMed2006

Design, synthesis and characterization of captopril prodrugs for enhanced percutaneous absorption.

Most drugs are designed primarily for oral administration, but the activity and stability profiles desirable for this route often make them unsuitable for transdermal delivery. We were therefore interested in designing analogues of captopril, a model drug with poor percutaneous penetration, for which the sustained steady-state blood plasma level associated with transdermal delivery (and which is unattainable orally) would be particularly beneficial. Quantitative structure-permeability relationships (QSPRs) predicted that ester and thiol prodrug derivatives of captopril would have lower maximal transdermal flux (J(m)) than the parent drug, since the increases in permeability coefficient (k(p)) of prodrugs would be outweighed by the reductions in aqueous solubility. Therefore, the aim of this study was to synthesize a series of prodrugs of captopril and to determine if a QSPR model could be used to design therapeutically viable prodrugs. Molecules with the highest predicted k(p) values were synthesized and characterized, and J(m) measured in Franz diffusion cells from saturated aqueous donor across porcine skin (fresh and frozen). In-vitro metabolism was also measured. Captopril and the prodrugs crossed the skin relatively freely, with J(m) being highest for ethyl to butyl esters. Substantial first-order metabolism of the prodrugs was observed, suggesting that their enhanced percutaneous absorption was complemented by their metabolic performance. The results suggested that QSPR models provided excellent enhancements in drug delivery. This was not seen at higher lipophilicities, suggesting that issues of solubility need to be considered in conjunction with any such use of a QSPR model.

Administration, Cutaneous↗
PubMed2006

Temperature- and pH-responsive smart polymers for gene delivery.

Biopolymer therapeutics are likely to be the next generation of medicines, and nucleic acids are among the most important of these potential drugs. The challenges of delivering genes are formidable and advanced biomimetic materials are expected to be required. Polymers that can respond to changes in temperature and pH are good candidates for gene delivery vehicles, as the stimulus response can be used to alter their interactions with the drug payload. In this review, the chemistries underlying these responsive polymers are considered, and the possible mechanisms by which nucleic acids, primarily DNA, can be protected during transit and released at target sites are outlined. Sophisticated multicomponent polymers are being developed, with functionalities designed to overcome the barriers to gene delivery at both the systemic and local level; key examples are highlighted. The extension of these materials to yet more advanced therapies, such as cell delivery and regenerative medicine, is outlined as an emerging technology for the future.

Drug Delivery Systems↗
PubMed2005

Molecularly imprinted drug delivery systems.

Imprinted polymers are well established as molecular recognition materials but are now being increasingly considered for active biomedical applications such as drug delivery. In this review some highlights of recent research into molecularly imprinted drug delivery and controlled release systems are presented. The key factors controlling recognition and release by imprinted polymer matrices are discussed, the current limiting factors in their properties arising from the synthesis of these materials are considered, and the future prospects for imprinted polymers in drug delivery are outlined.

Drug Delivery Systems↗
PubMed2005

Thermoresponsive polymers as gene delivery vectors: cell viability, DNA transport and transfection studies.

A range of gene delivery vectors containing the thermoresponsive polymer, poly(N-isopropylacrylamide) (PNIPAm) was evaluated for effects on cell viability, intracellular trafficking and transgene expression in C2C12 mouse muscle cells. Polymers were complexed with plasmid DNA at pH 7.4 and the ability of the resulting particles to transfect cells was assessed via confocal microscopy and protein expression studies in tissue culture. Cell viability assays indicated that these polymers were toxic at high concentrations when not complexed to DNA or at certain polymer:DNA ratios. Poly(ethyleneimine) co-polymers with side-chain grafted PNIPAm were shown to be less toxic than poly(ethyleneimine) alone or PNIPAm-co-(N,N'-dimethylaminoethylmethacrylate) linear co-polymers and the effects were concentration dependent. Confocal micrographs of labeled polymers and DNA indicated rapid cellular entry for all the complexes but expression of Green Fluorescent Protein was achieved only when the branched PEI-PNIPAm co-polymers were used as vectors. The results indicate that design of appropriate co-polymer components and overall polymer architecture can be used to mediate, and perhaps ultimately control, DNA transport and transgene expression.

Acrylic Resins↗
PubMed2005

Grafted thermo- and pH responsive co-polymers: surface-properties and bacterial adsorption.

A series of responsive polymers displaying pH and temperature-mediated phase changes were prepared from N-isopropylacrylamide and omega-carboxylic acid functionalised acrylamides. These polymers were grafted to surfaces and their characteristics probed by atomic force microscopy in aqueous solutions. The effects of pH and temperature induced phase transitions on the short-term adsorption of the bacteria Salmonella typhimurium and Bacillus cereus from pure cultures were assessed. Contact angle studies indicated that pH and temperature-dependent surface properties were exhibited by the graft polymer surfaces. Temperature-dependent surface morphology changes occurred through polymer graft phase transitions as observed in AFM and accompanying changes in adhesion forces underwater were found to correlate with surface properties obtained from contact angle measurements. Adsorption of S. typhimurium and B. cereus was not significantly altered as a function of pH, but attachment of both bacterial strains increased at temperatures above the polymer coil-globule transition indicating the importance of switching surface hydrophobicity in controlling short-term bacterial adsorption.

Bacillus cereus↗
PubMed2005

Stimuli responsive polymers for biomedical applications.

Polymers that can respond to external stimuli are of great interest in medicine, especially as controlled drug release vehicles. In this critical review, we consider the types of stimulus response used in therapeutic applications and the main classes of responsive materials developed to date. Particular emphasis is placed on the wide-ranging possibilities for the biomedical use of these polymers, ranging from drug delivery systems and cell adhesion mediators to controllers of enzyme function and gene expression (134 references).

Biocompatible Materials↗
PubMed2004

Control of a multisubunit DNA motor by a thermoresponsive polymer switch.

The conjugation of thermoresponsive polymers to multisubunit, multifunctional hybrid type 1 DNA restriction-modification (R-M) enzymes enables temperature-controlled "switching" of DNA methylation by the conjugate. Polymers attached to the enzyme at a subunit distal to the methylation subunit allow retention of DNA recognition and ATPase activity while controlling methylation of plasmid DNA. This regulation of enzyme activity arises from the coil-globule phase transitions of the polymer as shown in light scattering and gel retardation assays.

Acrylic Resins↗
PubMed2004

Protein-polymer nano-machines. Towards synthetic control of biological processes.

The exploitation of nature's machinery at length scales below the dimensions of a cell is an exciting challenge for biologists, chemists and physicists, while advances in our understanding of these biological motifs are now providing an opportunity to develop real single molecule devices for technological applications. Single molecule studies are already well advanced and biological molecular motors are being used to guide the design of nano-scale machines. However, controlling the specific functions of these devices in biological systems under changing conditions is difficult. In this review we describe the principles underlying the development of a molecular motor with numerous potential applications in nanotechnology and the use of specific synthetic polymers as prototypic molecular switches for control of the motor function. The molecular motor is a derivative of a TypeI Restriction-Modification (R-M) enzyme and the synthetic polymer is drawn from the class of materials that exhibit a temperature-dependent phase transition.The potential exploitation of single molecules as functional devices has been heralded as the dawn of new era in biotechnology and medicine. It is not surprising, therefore, that the efforts of numerous multidisciplinary teams 12. have been focused in attempts to develop these systems. as machines capable of functioning at the low sub-micron and nanometre length-scales 3. However, one of the obstacles for the practical application of single molecule devices is the lack of functional control methods in biological media, under changing conditions. In this review we describe the conceptual basis for a molecular motor (a derivative of a TypeI Restriction-Modification enzyme) with numerous potential applications in nanotechnology and the use of specific synthetic polymers as prototypic molecular switches for controlling the motor function 4.

Journal Article↗
PubMed2004

Thermo and pH responsive polymers as gene delivery vectors: effect of polymer architecture on DNA complexation in vitro.

Poly(N-isopropylacrylamide) (PNIPAm) co-polymers responsive to temperature and pH were prepared with side chain chemistries in order to exhibit phase transitions under physiologically relevant conditions. Fluorescence spectroscopy, gel retardation assays, dynamic light scattering and atomic force microscopy were used to characterize the binding of plasmid DNA to these materials and to control polymers poly(ethyleneimine) (PEI) and poly(ethyleneimine)-octanamide. Complexes of plasmid DNA with thermoresponsive cationic polymers containing PNIPAm displayed variations in gel retardation behaviour above and below polymer phase transition temperatures, with a high molecular weight linear cationic PNIPAm co-polymer forming complexes with reduced affinity above LCST whereas a branched PEI-PNIPAm co-polymer bound with higher affinity above the PNIPAm phase transition. The thermoresponsive polymers also exhibited changes in particle morphology across the same temperature ranges with polymer DNA complexes prepared at N/P ratios of 2:1 generating spherical particles varying in radius between 30-70 nm at 25 degrees C and 60-100 nm at 40-45 degrees C. The transport of DNA within these complexes to cell nuclei was demonstrated to occur within 24 h in tissue culture via confocal microscopy, and low level transfection of mouse muscle cells by a reporter gene encoding green fluorescent protein was achieved with the branched thermoresponsive PEI-PNIPAm conjugate.

Animals↗
PubMed2003

Adsorbed pluronics on the skin of human volunteers: effects on bacterial adhesion.

An amphiphilic copolymer, Pluronic F127, has been deposited, by adsorption, to the skin of human volunteers and the ability of the coated skin to resist bacterial colonisation has been evaluated. In parallel, the ability of the same copolymer to act as a bacterial release agent has been evaluated. In both cases, F127 proved to be of little added value in formulations designed to suppress the bacterial colonisation of human skin.

Adsorption↗
PubMed2002

Adsorbed poly(ethyleneoxide)-poly(propyleneoxide) copolymers on synthetic surfaces: spectroscopy and microscopy of polymer structures and effects on adhesion of skin-borne bacteria.

Poly(ethyleneoxide)-copoly(propyleneoxide) (PEO-PPO) polymer coatings were evaluated for their resistance to the attachment of the marker organism Serratia marcescens and the skin-borne bacteria Staphylococcus epidermidis. The copolymers were adsorbed onto poly(styrene) films-chosen as simplified physicochemical models of skin surfaces-and their surface characteristics probed by contact angle goniometry, attenuated total reflectance-Fourier transform infrared (ATR-FTIR), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). These functional surfaces were then presented to microbial cultures, bacterial attachment was assessed by fluorescence microscopy and AFM, and the structures of the polymer films examined again spectroscopically. Surface characterization data suggest that the adsorbed copolymer was partially retained at the surface and resisted bacterial attachment for 24 h. Quantitative evaluation of cell attachment was carried out by scintillation counting of (14)C-labeled microorganisms in conjunction with plate counts. The results show that a densely packed layer of PEO-PPO copolymer can reduce attachment of skin commensals by an order of magnitude, even when the coating is applied by a simple adsorptive process. The work supports the hypothesis that adhesion of microorganisms to biological substrates can be reduced if a pretreatment with an appropriate copolymer can be effected in vivo.

Adsorption↗
PubMedDate not supplied

Molecular imprinting science and technology: a survey of the literature for the years up to and including 2003.

Over 1450 references to original papers, reviews and monographs have herein been collected to document the development of molecular imprinting science and technology from the serendipitous discovery of Polyakov in 1931 to recent attempts to implement and understand the principles underlying the technique and its use in a range of application areas. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by papers dealing with fundamental aspects of molecular imprinting and the development of novel polymer formats. Thereafter, literature describing attempts to apply these polymeric materials to a range of application areas is presented.

Biological Assay↗