PubMed Health⌕ Search

Biomedical subjects

Carlos A Barrios

Publications and source records attributed to Carlos A Barrios.

6 recordsLinked to original sources

Evaluation of toxicity of capsaicin and zosteric acid and their potential application as antifoulants.

The toxicity of two natural product antifoulants, capsaicin and zosteric acid, was evaluated using the Microtox assay and a static toxicity test. The EC50 values obtained from the Microtox assay for capsaicin and zosteric acid were 11.75 +/- 1.02 and 442 +/- 100 mg/L, respectively. The static toxicity test, conducted with freshwater organisms, yielded capsaicin EC50 values of 5.5 +/- 0.5 and 23 +/- 2.0 mg/L for P. putida and Lake Erie bacteria, respectively. Zosteric acid EC50 values were 167 +/- 3.9 and 375 +/- 10 mg/L for P. putida and Lake Erie bacteria, respectively. Tests with marine organisms resulted in capsaicin EC50 values of 6.9 +/- 0.2 and 15.6 +/- 0.4 mg/L for V. natriegens and V. parahaemolyticus, respectively; whereas zosteric acid EC50 values were 7.4 +/- 0.1 and 18 +/- 0.6 mg/L for V. natriegens and V. parahaemolyticus, respectively. These results indicate that zosteric acid is much less toxic than capsaicin and that both are substantially less toxic than the currently used antifoulants, such as TBT (EC50 < 0.01 ppb). Their effectiveness as natural antifoulants was demonstrated by preliminary attachments studies. As the aqueous antifoulant concentration increased, significant inhibition of bacteria attachment or prevention of biofilm formation was achieved. Hence, both capsaicin and zosteric acid could be attractive alternatives as new antifouling compounds.

Bacterial Adhesion↗

Assessment of antifouling effectiveness of two natural product antifoulants by attachment study with freshwater bacteria.

UNLABELLED: GOAL, SCOPE, BACKGROUND: The traditional solution for keeping unwanted organisms from attaching to submerged surfaces is to apply anti-fouling coatings. The most common antifoulant was tributyltin (TBT). TBT systems were highly effective but were also toxic to non-target organisms. The use of the TBT based coatings will be completely banned by January 1, 2008. Therefore, there is an urgent need to seek out suitable non-toxic alternatives. METHODS: The aim of this work was to evaluate the effectiveness of capsaicin and zosteric acid as natural product antifoulants (NPAs) in deterring bacterial attachment. Two fresh water bacteria systems Pseudomonas putida (Pp) and bacteria isolated from Lake Erie (LE) were used to assess the attachment when the NPAs dispersed in the water. Effectiveness was ascertained based on the decrease in microbial attachment, limited toxicity, and minimum alteration of the coatings properties. RESULTS AND DISCUSSION: A significant inhibition of bacteria attachment was achieved when aqueous capsaicin concentration was increased from 0 to 40 mg/L. For instance, after 14 days the LE system depicted 93.5% and 98.5% less biofilm coverage for 20 mg/L and 40 mg/L capsaicin, respectively when pared to systems without NPA. Biofilm coverage was reduced by 92.5% and 98.2%, respectively with 50 mg/L and 500 mg/L zosteric acid. CONCLUSIONS: Both capsaicin and zosteric acid was effective at preventing bacteria attachment. As the NPA aqueous concentration increased, biofilm formation decreased. Evaluating changes in aqueous pH, conductivity, dissolved oxygen, aqueous microbial population and biofilm formation suggested that the primary antifoulant mechanism of these two NPAs was to block the bacteria's active sites versus posing a lethal level. RECOMMENDATION AND PERSPECTIVE: From the attachment study, zosteric acid appeared to be more effective in preventing bacterial attachment when the NPAs were dispersed in the aqueous environment. For practical applications, the antifoulant needs to be incorporated into a coating and have a slow release rate. Thus the ability to successfully incorporate zosteric acid into a coating, without deterring bacterial attachment, needs to be investigated.

Biofilms↗

Incorporating zosteric acid into silicone coatings to achieve its slow release while reducing fresh water bacterial attachment.

Biofouling has posed serious problems in maritime industry including increased fuel consumptions, economic loss from ship-hull maintenances, contamination of drinking water, and serious corrosion for mechanical instruments. Minimizing the attachment of bacteria and formation of biofilm could be advantageous in reducing the early stages of biofouling. Zosteric acid, a natural product present in eelgrass, was found to have ability for preventing the attachment of some bacteria and barnacles. In this study, the antifouling ability of zosteric acid during the early stages of fouling was evaluated using attachment studies of fresh water bacteria. Simultaneously, various methods were sought for incorporating zosteric acid into silicone to prolong the release of the compound. The main results from this study were that zosteric acid exhibited anti-bacterial attachment regardless of whether it dispersed in water or incorporated into a coating. In addition, the release rate of zosteric acid from the incorporated coatings, particularly those where zosteric acid was uniformly dispersed with aggregates size of 4 microm or less, was orders of magnitude slower than those of previous reports. The release results indicate that the service life of our coatings could be far extended even with a small amount of zosteric acid incorporated.

Bacterial Adhesion↗

All-optical switching on a silicon chip.

We present an experimental demonstration of fast all-optical switching on a silicon photonic integrated device by employing a strong light-confinement structure to enhance sensitivity to small changes in the refractive index. By use of a control light pulse with energy as low as 40 pJ, the optical transmission of the structure is modulated by more than 97% with a time response of 450 ps.

Journal Article↗

All-optical control of light on a silicon chip.

Photonic circuits, in which beams of light redirect the flow of other beams of light, are a long-standing goal for developing highly integrated optical communication components. Furthermore, it is highly desirable to use silicon--the dominant material in the microelectronic industry--as the platform for such circuits. Photonic structures that bend, split, couple and filter light have recently been demonstrated in silicon, but the flow of light in these structures is predetermined and cannot be readily modulated during operation. All-optical switches and modulators have been demonstrated with III-V compound semiconductors, but achieving the same in silicon is challenging owing to its relatively weak nonlinear optical properties. Indeed, all-optical switching in silicon has only been achieved by using extremely high powers in large or non-planar structures, where the modulated light is propagating out-of-plane. Such high powers, large dimensions and non-planar geometries are inappropriate for effective on-chip integration. Here we present the experimental demonstration of fast all-optical switching on silicon using highly light-confining structures to enhance the sensitivity of light to small changes in refractive index. The transmission of the structure can be modulated by up to 94% in less than 500 ps using light pulses with energies as low as 25 pJ. These results confirm the recent theoretical prediction of efficient optical switching in silicon using resonant structures.

Journal Article↗

Guiding and confining light in void nanostructure.

We present a novel waveguide geometry for enhancing and confining light in a nanometer-wide low-index material. Light enhancement and confinement is caused by large discontinuity of the electric field at high-index-contrast interfaces. We show that by use of such a structure the field can be confined in a 50-nm-wide low-index region with a normalized intensity of 20 microm(-2). This intensity is approximately 20 times higher than what can be achieved in SiO2 with conventional rectangular waveguides.

Journal Article↗