Biomedical subjects

Carlos C Romão

Publications and source records attributed to Carlos C Romão.

9 recordsLinked to original sources

PubMed2006

Dioxomolybdenum(VI) complexes as catalysts for the hydrosilylation of aldehydes and ketones.

The dioxomolybdenum(VI) complexes [MoO2Cl2] (1), [MoO2(acac)2] (2), [MoO2(S2CNEt2)2] (3), [CpMoO2Cl] (4), [MoO2(mes)2] (5) and the polymeric organotin-oxomolybdates [(R3Sn)2MoO4] [R = n-Bu (6), t-Bu (7), Me (8)] were examined as catalysts for the hydrosilylation of aldehydes and ketones with dimethylphenylsilane. Of these, [MoO2Cl2] (1) was the most efficient catalyst, affording quantitative yields of the corresponding silylated ethers at room temperature in acetonitrile. Complexes 2, 4-8 also catalyzed the same reaction but required heating at 80 degrees C and longer reaction times compared with 1. Compound 3 is inactive. The wide scope of molybdenum oxide-mediated hydrosilylation was established with a variety of aldehydes and ketones. Counter intuitively, the activity of is 1 highest in NCMe. In the absence of a carbonyl substrate, [MoO2Cl2(NCBu(t))] (10) reacts with HSiMe2Ph affording [MoO(OSiMe2Ph)Cl2]2 (11) which has been fully characterized by NMR and IR spectroscopy, elemental analyses and mass spectrometry. Addition of radical scavengers strongly slows down the [MoO2Cl2]-based hydrosilylation suggesting the intermediacy of oxygen-centered radicals.

Aldehydes↗

PubMed2006

Olefin epoxidation with tert-butyl hydroperoxide catalyzed by MoO2X2L complexes: a DFT mechanistic study.

DFT calculations suggest that the catalytic epoxidation of olefins by Mo(vi) complexes, modeled by MoO2Br2(MeN=C(H)-C(H)=NMe), in the presence of MeOOH, the model for tert-butyl hydroperoxide, starts with a hydrogen transfer from the peroxide to one of the terminal Mo=O oxygen atoms and the remaining MeOO anion binds as a seventh ligand, forming a five-membered Mo-O(alpha)-O(beta)(Me)...H-O-Mo ring held together by a hydrogen bond. In the second step, a concerted approach of ethylene to the Mo-O(alpha) bond gives rise to an intermediate containing a seven-membered Mo-C-C-O(alpha)-O(beta)(Me)...H-O-Mo ring. In the final step, decomposition of the intermediate leads to the starting complex, alcohol and the epoxide. The activation energy for the addition of the olefin (second step) is the highest one, in agreement with available kinetic studies showing that the catalyst formation is not always a rate-limiting step. DFT calculations also show that the alcohol by-product (MeOH) can react with the starting complex, competing with ROOH and hence leading to the progressive catalyst poisoning, which has been observed experimentally.

Alcohols↗

PubMed2004

Oxorhenium complexes as aldehyde-olefination catalysts.

Several oxorhenium compounds in the formal oxidation states V and VII are examined as catalysts for the aldehyde-olefination starting from diazo compounds, phosphines, and aldehydes. Of these, [ReMeO2(eta2-alkyne)] complexes provide the simplest catalysts to study, although [ReOCl3(PPh3)2] still remains the most efficient rhenium catalyst for aldehyde-olefination described to date. Prior to the reaction with the Re catalysts the phosphine and the diazo compound react to form a phosphazine. No catalytic reaction occurs in cases where no phosphazine formation is observed. The first step of the catalytic cycle involves the formation of a carbene intermediate by the reaction of phosphazine and catalyst under extrusion of phosphine oxide and dinitrogen. In a second step the carbene reacts with aldehyde under olefin formation and catalyst regeneration. Excess of alkyne as well as the presence of ketones slows down the catalytic reaction. The olefination of 4-nitrobenzaldehyde with diazomalonate is possible with these Re catalysts. In contrast, this reaction does not take place either in the classical Wittig fashion from Ph3P=C(CO2Et)2 and aldehyde or by use of all other catalysts for aldehyde olefination reactions reported to date. Catalytic ylide formation from diazo compounds seems therefore not to be the only pathway through which catalytic aldehyde-olefination reactions can proceed.

Journal Article↗

PubMed2003

Preparation and characterization of organotin-oxomolybdate coordination polymers and their use in sulfoxidation catalysis.

The organotin-oxomolybdates [(R(3)Sn)(2)MoO(4)].n H(2)O (R=methyl, n-butyl, cyclohexyl, phenyl, benzyl) have been prepared and tested as catalysts for the oxidation of benzothiophene with aqueous hydrogen peroxide, at 35 degrees C and atmospheric pressure. In all cases, the 1,1-dioxide was the only observed product. The kinetic profiles depend on the nature of the tin-bound R group and also on the addition of a co-solvent. For the tribenzyltin derivative, the apparent activation energies for sulfoxidation as a function of the co-solvent are in the order 1,2-dichloroethane (5 kcal mol(-1))<ethanol<acetonitrile<water (27 kcal mol(-1)). The solid could be recovered by centrifugation from the three-phase (solid-liquid-liquid) system containing 1,2-dichloroethane. The catalyst was reused in a second reaction cycle with no significant loss of activity. Increasing the oxidant/substrate ratio from 2:1 to 6:1 allows the corresponding sulfone to be obtained in quantitative yield within 24 h. Changing the nature of the tin-bound R group in the catalyst precursors modifies their physical properties and hence their catalytic performance. The variation in hydrophobic/hydrophilic character is important, since the Me, nBu and Cy derivatives crystallize as anhydrous compounds, whereas the other two derivatives are hydrates. The polymers also have different structures, as evidenced by Xray powder diffraction. Mo K-edge and Sn K-edge EXAFS spectroscopy confirmed that the structures arise from the self-assembly of tetrahedral [MoO(4)](2-) subunits and [R(3)Sn](+) spacers. The Mo...Sn separation in the trimethyltin derivative is a uniform 3.84 A. By contrast, the EXAFS results revealed the coexistence of short (3.67-3.79 A) and long (3.93-4.07 A) Mo.Sn separations in the other coordination polymers. The catalyst precursors were also characterized in the solid state by thermogravimetric analysis, FTIR, and Raman spectroscopy, and MAS NMR ((13)C, (119)Sn) spectroscopy.

Journal Article↗

PubMed2003

Encapsulation of sodium nimesulide and precursors in beta-cyclodextrin.

Crystalline 1:1 inclusion complexes with beta-cyclodextrin (beta-CD) and the sodium salt of nimesulide (4-nitro-2-phenoxymethanesulfonanilide), and the sodium salt of the derivative 2-phenoxymethanesulfonanilide, have been prepared by co-precipitation from aqueous solution. The presence of true inclusion complexes was supported by elemental analysis, thermogravimetry and powder X-ray diffraction. FTIR and 13C CP MAS NMR spectroscopy confirmed that no chemical modification of the guests occurred upon formation of inclusion complexes. The reaction of the precursors 2-phenoxynitrobenzene and 2-phenoxyaniline with beta-CD was also studied and crystalline inclusion complexes with a 2:1 (host-to-guest) stoichiometry were isolated. The interaction of the different guest species with beta-CD host molecules was studied theoretically by carrying out ab initio calculations. Favourable inclusion geometries were obtained for the four guests mentioned above. On the other hand, it was found that the inclusion of the neutral guests nimesulide and 2-phenoxymethanesulfonanilide was considerably less favourable. This is in agreement with the experimentally observed difficulty in isolating true inclusion complexes containing these guests and beta-CD. The calculated lower stability is attributed to the different steric hindrance arising from the different conformational preferences of neutral and anionic forms.

Cyclodextrins↗

PubMed2003

(Eta2-alkyne)methyl(dioxo)rhenium complexes as aldehyde-olefination catalysts.

Complexes CH3ReO2L (L = 2-butyne, 3-hexyne, diphenylacetylene) are catalysts for the olefination of aldehydes, using 4-nitrobenzaldehyde (4-nba) as the standard aldehyde and ethyldiazoacetate (eda) as the diazo compound. Spectroscopic studies including in situ 31P, 17O, 13C, and 1H NMR spectroscopy are used to elucidate the mechanism and the nature of the active species. One of the key steps of the mechanism is the rapid formation of phosphazine at the beginning of the cycle and its subsequent reaction with the metal dioxide complex to form the catalytically active carbene species.

Journal Article↗

PubMed2002

Synthesis and catalytic application of octahedral lewis base adducts of dichloro and dialkyl dioxotungsten(VI).

Complexes of the composition W(O)(2)(Cl)(2)L(2) and W(O)(2)(R)(2)L(2) (R = Me, Et; L(2) = bidentate Lewis base ligand) have been prepared and are fully characterized (including an exemplary X-ray crystal structure of W(O)(2)(Cl)(2)(4,4'-di-tert-butyl-2,2'-bipyridine)). This latter compound crystallizes in the orthorhombic space group P2(1)2(1)2(1) with a = 8.3198(1) A, b = 13.3224(2) A, c = 18.0415(2) A, and Z = 4. The title complexes are applied as catalysts in olefin epoxidation catalysis with tert-butyl hydroperoxide (TBHP) as the oxidizing agent. The W(VI) complexes display only moderate turnover frequencies but can be reused several times without loss of catalytic activity. The highest activity can be achieved at reaction temperatures of ca. 90 degrees C. Chloro derivatives are somewhat more active than alkyl complexes, and sterically less crowded complexes show also higher activities than their congeners with bulky ligands L(2). Kinetic examinations show that the catalyst formation is the rate determining step and it is observed that tert-butyl alcohol, the byproduct of the epoxidation reaction, acts as a competitor for TBHP, thus lowering the reaction velocity during the course of the reaction but not irreversibly destroying the catalyst.

Journal Article↗

PubMed2002

Octahedral bipyridine and bipyrimidine dioxomolybdenum(VI) complexes: characterization, application in catalytic epoxidation, and density functional mechanistic study.

Complexes of the general formula [MoO(2)X(2)L(2)] (X=Cl, Br, Me; L(2)=bipy, bpym) have been prepared and fully characterized, including X-ray crystallographic investigations of all six compounds. Additionally, the highly soluble complex [MoO(2)Cl(2)(4,4'-bis(hexyl)-2,2'-bipyridine)] has been synthesized. The reaction of the complexes with tert-butyl hydroperoxide (TBHP) is an equilibrium reaction, and leads to MoV(I) eta(1)-alkylperoxo complexes that selectively catalyze the epoxidation of olefins. Neither the Mo-X bonds nor the Mo-N bonds are cleaved during this reaction. These experimental results are supported by theoretical calculations, which show that the attack of TBHP at the Mo center through the X-O-N face is energetically favored and the TBHP hydrogen atom is transferred to a terminal oxygen of the Mo=O moiety. After the attack of the olefin on the Mo-bound peroxo oxygen atom, epoxide and tert-butyl alcohol are formed. The latter compound acts as a competitive inhibitor for the TBHP attack, and leads to a significant reduction in the catalytic activity with increasing reaction time.

Journal Article↗

PubMed2002

The nature of the indenyl effect.

The eta(5)-to-eta(3) coordination shift of cyclopentadienyl (Cp=C(5)H(5)(-)) and indenyl (Ind=C(9)H(7)(-)) ligands in molybdenocene complexes, [(eta(5)-Cp')(eta(5)-Cp)Mo(CO)(2)](2+) (Cp'=Cp or Ind), driven by a two-electron reduction of those species, was studied and compared by means of molecular orbital calculations (B3LYP HF/DFT hybrid functional, DZP basis sets). The results obtained, in terms of optimized geometries, relative energies, and bond analysis parameters, compare well with the experimental data, and verify the well-known indenyl effect, that is, a significantly more facile eta(5)-to-eta(3) rearrangement for the indenyl ligand when compared to cyclopentadienyl. However, the study of the folding of free Cp and Ind, combined with the (eta(5/3)-Cp')-M bond analysis, shows that the observed difference is not the result of an intrinsic characteristic of the indenyl ligand, such as the traditionally accepted aromaticity gain in the benzene ring formed in eta(3)-Ind complexes. Instead, it is directly related to the Cp'-M bond strength. While the difference in the energy required to fold the two free ligands is negligible (< or =1 kcal mol(-1) for folding angles up to 20 degrees), the (eta(5)-Cp)-M bond is stronger than that of (eta(5)-Ind)-M; however, the opposite situation is found for the eta(3) coordination mode. The net result, for Cp'=Ind, is a destabilization of the eta(5) complexes and a stabilization of the eta(3) intermediates or transition states yielding smaller activation energies and faster reaction rates for processes in which that is the rate-determining step.

Journal Article↗