Biomedical subjects
Publications and source records attributed to Cees Dekker.
Noble metal nanoparticles can be electrodeposited on carbon nanotubes under potential control. The nanotube sidewalls serve both as the electrodeposition template and as the wire electrically connecting the deposited nanoparticles.
The assembly of RecA onto a torsionally constrained double-stranded DNA molecule was followed in real time using magnetic tweezers. Formation of a RecA-DNA filament on the DNA tether was stalled owing to different physical processes depending on the applied stretching force. For forces up to 3.6 pN, the reaction stalled owing to the formation of positive plectonemes in the remaining DNA molecule. Release of these plectonemes by rotation of the magnets led to full coverage of the DNA molecule by RecA. At stretching forces larger than 3.6 pN, the twist induced during filament formation caused the reaction to stall before positive supercoils were generated. We deduce a maximum built-up torsion of 10.1 +/- 0.7 k(b)T. In vivo this built-up torsion may be used to favor regression of a stalled replication fork or to free the chromosomal DNA in E.coli from its condensing proteins.
Topoisomerases relieve the torsional strain in DNA that is built up during replication and transcription. They are vital for cell proliferation and are a target for poisoning by anti-cancer drugs. Type IB topoisomerase (TopIB) forms a protein clamp around the DNA duplex and creates a transient nick that permits removal of supercoils. Using real-time single-molecule observation, we show that TopIB releases supercoils by a swivel mechanism that involves friction between the rotating DNA and the enzyme cavity: that is, the DNA does not freely rotate. Unlike a nicking enzyme, TopIB does not release all the supercoils at once, but it typically does so in multiple steps. The number of supercoils removed per step follows an exponential distribution. The enzyme is found to be torque-sensitive, as the mean number of supercoils per step increases with the torque stored in the DNA. We propose a model for topoisomerization in which the torque drives the DNA rotation over a rugged periodic energy landscape in which the topoisomerase has a small but quantifiable probability to religate the DNA once per turn.
Progress in the fabrication of nanometre-scale electronic devices is opening new opportunities to uncover deeper aspects of the Kondo effect--a characteristic phenomenon in the physics of strongly correlated electrons. Artificial single-impurity Kondo systems have been realized in various nanostructures, including semiconductor quantum dots, carbon nanotubes and individual molecules. The Kondo effect is usually regarded as a spin-related phenomenon, namely the coherent exchange of the spin between a localized state and a Fermi sea of delocalized electrons. In principle, however, the role of the spin could be replaced by other degrees of freedom, such as an orbital quantum number. Here we show that the unique electronic structure of carbon nanotubes enables the observation of a purely orbital Kondo effect. We use a magnetic field to tune spin-polarized states into orbital degeneracy and conclude that the orbital quantum number is conserved during tunnelling. When orbital and spin degeneracies are present simultaneously, we observe a strongly enhanced Kondo effect, with a multiple splitting of the Kondo resonance at finite field and predicted to obey a so-called SU4 symmetry.
We report a new technique for fabricating electrodes for electrochemical applications with lateral dimensions in the range 15-200 nm and a reproducible, well-defined geometry. This technique allows determining the electrode size by electron microscopy prior to electrochemical measurements and without contamination of the metal electrode. We measured the diffusion-limited current with stepped-current voltammetry and showed that its dependence on electrode size can be quantitatively understood if the known geometry of the electrodes is explicitly taken into account.
We report experiments and modeling of translocation of double-strand DNA through a siliconoxide nanopore. Long DNA molecules with different lengths ranging from 6500 to 97000 base pairs have been electrophoretically driven through a 10 nm pore. We observe a power-law caling of the translocation time with the length, with an exponent of 1.27. This nonlinear scaling is strikingly different from the well-studied linear behavior observed in similar experiments performed on protein pores. We present a theoretical model where hydrodynamic drag on the ection of the polymer outside the pore is the dominant force counteracting the electrical driving force. We show that this applies to our experiments, and we derive a power-law scaling with an exponent of 1.22, in good agreement with the data.
We demonstrate the use of individual single-walled carbon nanotubes (SWNTs) as nanoelectrodes for electrochemistry. SWNTs were contacted by nanolithography, and cyclic voltammetry was performed in aqueous solutions. Interestingly, metallic and semiconducting SWNTs yielded similar steady-state voltammetric curves. We clarify this behavior through a model that considers the electronic structure of the SWNTs. Interfacial electron transfer to the SWNTs is observed to be very fast but can nonetheless be resolved due to the nanometer critical dimension of SWNTs. These studies demonstrate the potential of using a SWNT as a model carbon nanoelectrode for electrochemistry.
We demonstrate localized electrical control of the docking of microtubules onto engineered kinesin-coated structures. After applying a voltage to a gold electrode, we observe an enhanced transport of microtubules from solution toward the surface and a subsequent increase of the amount of moving microtubule shuttles. Switching off the voltage leads to a partial detachment of microtubules from the surface. The surface coverage of microtubules, during both the docking and undocking events, follows an exponential time dependence. We provide a simple kinetic model, incorporating the equilibrium between free and surface-bound microtubules, that explains these data.
A method to produce metal electrodes with a gap of a few nanometers with a highly focused electron beam in a transmission electron microscope (TEM) is described. With this method the electrical and geometrical characterization of the same particle is possible. The I-V characteristics of a gold particle trapped between such electrodes showed the expected single-electron tunneling behavior, with a Coulomb gap corresponding to the geometry of the particle as observed with high-resolution TEM.
We demonstrate highly efficient rectification of microtubule motility on gold nanofabricated structures. First, we present a novel nanofabrication process for the creation of gold tracks for microtubule motility recessed in silicon oxide. This approach is particularly useful because it enables the use of the well-understood PEG-silane chemistry on SiO2 for the blocking of kinesin, whereas the gold tracks allow possible electrical control. We demonstrate excellent confinement of microtubule motility to the gold nanostructures and that microtubules move on the gold with speeds comparable to that on glass. Second, we present designs of three advanced rectifier geometries. We analyze the microtubule pathways through the geometries, and we demonstrate highly efficient rectification with up to 92% efficiency. As a result, we find that up to 97% of the microtubules move unidirectionally.
We demonstrate that the ionic current through a solid-state nanopore can be used to measure at single nanometer resolution the three-dimensional intensity profile of a laser directly in the focus of a microscope objective. We find a linear dependence of the ionic current on the incident laser power since the laser-induced heat increases the temperature locally in the solution. Our data show a temperature increase of up to 20 K in the center of the focus for a laser wavelength of 1064 nm. Measurements of the two-dimensional temperature profiles at different positions along the optical axis allow us to reconstruct the three-dimensional temperature profile of the laser focus, similar to tomography. Our new technique does not rely on the help of any optical elements and allows quantitative measurement of optical intensity or temperature distributions in aqueous environments with nanometer resolution.
Recognition of 'foreign' DNA by Type I restriction-modification (R-M) enzymes elicits an ATP-dependent switch from methylase to endonuclease activity, which involves DNA translocation by the restriction subunit HsdR. Type I R-M enzymes are composed of three (Hsd) subunits with a stoichiometry of HsdR2:HsdM2:HsdS1 (R2-complex). However, the EcoR124I R-M enzyme can also exist as a cleavage deficient, sub-assembly of HsdR1:HsdM2:HsdS1 (R1-complex). ATPS was used to trap initial translocation complexes, which were visualized by Atomic Force Microscopy (AFM). In the R1-complex, a small bulge, associated with a shortening in the contour-length of the DNA of 8 nm, was observed. This bulge was found to be sensitive to single-strand DNA nucleases, indicative of non-duplexed DNA. R2-complexes appeared larger in the AFM images and the DNA contour length showed a shortening of approximately 11 nm, suggesting that two bulges were formed. Disclosure of the structure of the first stage after the recognition-translocation switch of Type I restriction enzymes forms an important first step in resolving a detailed mechanistic picture of DNA translocation by SF-II DNA translocation motors.
Cyclic voltammetry shows that yeast iso-1-cytochrome c (YCC), chemisorbed on a bare gold electrode via Cys102, exhibits fast, reversible interfacial electron transfer (k(0) = 1.8 x 10(3) s(-1)) and retains its native functionality. Vectorially immobilized YCC relays electrons to yeast cytochrome c peroxidase, and to both cytochrome cd(1) nitrite reductase (NIR) and nitric oxide reductase from Paracoccus denitrificans, thereby revealing the mechanistic properties of these enzymes. On a microelectrode, we measured nitrite turnover by approximately 80 zmol (49 000 molecules) of NIR, coadsorbed on 0.65 amol (390 000 molecules) of YCC.
Type I restriction enzymes bind sequence-specifically to unmodified DNA and subsequently pull the adjacent DNA toward themselves. Cleavage then occurs remotely from the recognition site. The mechanism by which these members of the superfamily 2 (SF2) of helicases translocate DNA is largely unknown. We report the first single-molecule study of DNA translocation by the type I restriction enzyme EcoR124I. Mechanochemical parameters such as the translocation rate and processivity, and their dependence on force and ATP concentration, are presented. We show that the two motor subunits of EcoR124I work independently. By using torsionally constrained DNA molecules, we found that the enzyme tracks along the helical pitch of the DNA molecule. This assay may be directly applicable to investigating the tracking of other DNA-translocating motors along their DNA templates.
A study of ion transport in aqueous-filled silica channels as thin as 70 nm reveals a remarkable degree of conduction at low salt concentrations that departs strongly from bulk behavior: In the dilute limit, the electrical conductances of channels saturate at a value that is independent of both the salt concentration and the channel height. Our data are well described by an electrokinetic model parametrized only by the surface-charge density. Using chemical surface modifications, we further demonstrate that at low salt concentrations, ion transport in nanochannels is governed by the surface charge.
Optical and electronic phenomena in solids arise from the behaviour of electrons and holes (unoccupied states in a filled electron sea). Electron-hole symmetry can often be invoked as a simplifying description, which states that electrons with energy above the Fermi sea behave the same as holes below the Fermi energy. In semiconductors, however, electron-hole symmetry is generally absent, because the energy-band structure of the conduction band differs from the valence band. Here we report on measurements of the discrete, quantized-energy spectrum of electrons and holes in a semiconducting carbon nanotube. By applying a voltage to a gate electrode, an individual nanotube is filled controllably with a precise number of either electrons or holes, starting from one. The discrete excitation spectrum for a nanotube with N holes is strikingly similar to the corresponding spectrum for N electrons. This observation of near-perfect electron-hole symmetry demonstrates that a semiconducting nanotube can be free of charged impurities, even in the limit of few electrons or holes. We furthermore find an anomalously small Zeeman spin splitting and an excitation spectrum indicating strong electron-electron interactions.
The nucleoid-associated protein HU is one of the most abundant proteins in Escherichia coli and has been suggested to play an important role in bacterial nucleoid organization and regulation. Although the regulatory aspects of HU have been firmly established, much less is understood about the role of HU in shaping the bacterial nucleoid. In both functions (local) modulation of DNA architecture seems an essential feature, but information on the mechanical properties of this type of sequence-independent nucleoprotein complex is scarce. In this study we used magnetic tweezers and atomic force microscopy to quantify HU-induced DNA bending and condensation. Both techniques revealed that HU can have two opposing mechanical effects depending on the protein concentration. At concentrations <100 nM, individual HU dimers induce very flexible bends in DNA that are responsible for DNA compaction up to 50%. At higher HU concentrations, a rigid nucleoprotein filament is formed in which HU appears to arrange helically around the DNA without inducing significant condensation.
Protein structural features are usually determined by defining regularities in a large population of homogeneous molecules. However, irregular features such as structural variation and flexibility are likely to be missed, despite their vital role for their biological function. In this paper, we report the observation of striking irregularities in the flexibility of the coiled-coil region of the human Rad50 DNA repair protein. Existing methods to quantitatively analyze flexibility are applicable to homogeneous polymers only. Because protein coiled-coils cannot be assumed to be homogeneous, we develop a method to quantify the local flexibility from high-resolution atomic force microscopy images. Indeed, in Rad50 coiled-coils, two positions of increased flexibility are observed. We discuss how this dynamic structural feature is integral to Rad50 function.