Biomedical subjects

Cees W M Bastiaansen

Publications and source records attributed to Cees W M Bastiaansen.

6 recordsLinked to original sources

PubMed2006

Molecular machines: nanomotor rotates microscale objects.

Nanomachines of the future will require molecular-scale motors that can perform work and collectively induce controlled motion of much larger objects. We have designed a synthetic, light-driven molecular motor that is embedded in a liquid-crystal film and can rotate objects placed on the film that exceed the size of the motor molecule by a factor of 10,000. The changes in shape of the motor during the rotary steps cause a remarkable rotational reorganization of the liquid-crystal film and its surface relief, which ultimately causes the rotation of submillimetre-sized particles on the film.

Journal Article↗

PubMed2006

Large area liquid crystal monodomain field-effect transistors.

Butyl, hexyl, and decyl derivatives of the liquid-crystalline organic semiconductor 5,5' '-bis(5-alkyl-2-thienylethynyl)-2,2':5',2' '-terthiophene were synthesized and studied with respect to their structural, optical, and electrical properties. By means of an optimized thermal annealing scheme the hexyl and decyl compounds could be processed into self-assembled monodomain films of up to 150 mm in diameter. These were investigated with X-ray diffractometry, which revealed a clearly single-crystalline monoclinic morphology with lamellae parallel to the substrate. Within the lamellae the molecules were found to arrange with a tilt of about 50 degrees with the rubbing direction of the polyimide alignment layer. The resulting, close side-to-side packing was confirmed by measurements of the UV/vis absorption, which showed a dichroic ratio of 19 and indicated H-aggregation. AFM analyses revealed self-affinity in the surface roughness of the monodomain. The compounds showed bipolar charge transport in TOF measurements, with hole mobilities reaching up to 0.02 cm(2)/Vs and maximum electron mobilities around 0.002 cm(2)/Vs. The hexyl derivative was processed into large-area monodomain top-gate field-effect transistors, which were stable for months and showed anisotropic hole mobilities of up to 0.02 cm(2)/Vs. Compared to multidomain bottom-gate transistors the monodomain formation allowed for a mobility increase by 1 order of magnitude.

Journal Article↗

PubMed2005

Self-assembled polymer films for controlled agent-driven motion.

Reliable stimuli-responsive materials make up a vital part of molecular medicine and on-chip diagnostics. Here, we describe such a material which exhibits rapid, large-amplitude, reversible deformations and which is formed in a simple, one-material, one-step, self-assembly process. The material is a polymer network comprised of discrete molecular actuators which anisotropically expand in response to their driving stimuli. Tuning the relative orientation of the actuators with respect to one another creates expansion variations throughout a sample, and this is exploited to induce macroscopic motion. The deformation directions are pre-engineered by the molecular positioning, and extremely fast response times and high sensitivity are observed. We describe water- and pH-controlled motion, and we anticipate that the techniques are extendable to other biologically or industrially relevant agents.

Hydrogen-Ion Concentration↗

PubMed2004

Hydrophilic elastomers for microcontact printing of polar inks.

A moderately hydrophilic, thermoplastic elastomer (poly(ether-ester)) was investigated as a stamp material for microcontact printing of a polar ink: pentaerythritol-tetrakis-(3-mercaptopropionate). Stamps with a relief structure were produced from this polymer by hot embossing, and a comparison was made with conventional poly(dimethylsiloxane) (PDMS) and oxygen-plasma-treated PDMS. It is shown that the hydrophilic stamps can be used for the repetitive printing (without re-inking) of at least 10 consecutive patterns, which preserve their etch resistance, and this in rather sharp contrast to conventional and oxygen plasma-treated PDMS stamps. It is argued that these enhanced printing characteristics of the hydrophilic stamps originate from an improved wetting and solubility of polar inks in the hydrophilic stamp.

Journal Article↗

PubMedDate not supplied

Optimizing photo-embossed gratings: a gradient library approach.

Methodologies for the rapid screening of coating systems were developed and applied to photopolymer lacquers for photoembossing applications. Continuous and discrete gradient libraries were prepared with a gradient in grating period along the short axis and along the long axis, a gradient in exposure energy, development temperature, film thickness, photoinitiator concentration, or monomer to polymer mass ratio. Discrete gradient libraries consisted of arrays of rectangular films made by pipetting a certain amount of sample onto a chemically patterned substrate consisting of hydrophilic patches surrounded by hydrophobic, fluorinated barriers. The shape and height of the photoembossed gratings were measured using an automated AFM. Optimum grating height was obtained for a 20-microm period at intermediate exposure energies, photoinitiator concentrations, or both. Height improves with development temperature (max 110 degrees C), monomer-to-polymer ratio (max 55 wt % monomer), and film thickness. Surface topography can also be optimized, depending on any specific application.

Calorimetry, Differential Scanning↗

PubMedDate not supplied

High-throughput screening and optimization of photoembossed relief structures.

A methodology for the rapid design, screening, and optimization of coating systems with surface relief structures, using a combination of statistical experimental design, high-throughput experimentation, data mining, and graphical and mathematical optimization routines was developed. The methodology was applied to photopolymers used in photoembossing applications. A library of 72 films was prepared by dispensing a given amount of sample onto a chemically patterned substrate consisting of hydrophilic areas separated by fluorinated hydrophobic barriers. Film composition and film processing conditions were determined using statistical experimental design. The surface topology of the films was characterized by automated AFM. Subsequently, models explaining the dependence of surface topologies on sample composition and processing parameters were developed and used for screening a virtual 4000-membered in silico library of photopolymer lacquers. Simple graphical optimization or Pareto algorithms were subsequently used to find an ensemble of formulations, which were optimal with respect to a predefined set of properties, such as aspect ratio and shape of the relief structures.

Automation↗