PubMed Health⌕ Search

Biomedical subjects

Chandrasekhar Kesavan

Publications and source records attributed to Chandrasekhar Kesavan.

7 recordsLinked to original sources
PubMed2006

Identification of genetic loci that regulate bone adaptive response to mechanical loading in C57BL/6J and C3H/HeJ mice intercross.

Strain-dependent differences in bone adaptive responses to loading among inbred mouse strains suggest that genetic background contributes significantly to adaptation to exercise. To explore the genetic regulation of response to loading, we performed a genome-wide search for linkage in a cross between two strains, a good responder, C57BL6/J (B6), and a poor responder, C3H/HeJ (C3H). Using a four-point bending model, the right tibia was loaded by applying 9 N force for 36 cycles for 12 days in 10-week-old female B6xC3H F2 mice. Changes in bone density (BMD) and bone size were evaluated in vivo by pQCT. Measurements from non-loaded left tibia were used as an internal control to calculate loading-induced percent increase in BMD and bone size, thus excluding the possibility of identifying background QTL(s) due to natural allelic variation in mapping strains. A genome-wide scan was performed using 111 microsatellite markers in DNA samples collected from 329 F2 mice. Heritability of bone adaptive response to loading was between 70 and 80%. The mean increase, expressed as percent of unloaded tibia, was 5% for BMD, 9% for periosteal circumference (PC), and 14% for cortical thickness in F2 mice (n = 329). All these phenotypes showed normal distributions. Absence of significant correlation between BMD response to four-point bending and body weight or bone size suggested that the bone adaptive response was independent of bone size. Interval mapping revealed that BMD response to four-point bending was influenced by three significant loci on Chrs 1 (log-of-odds ratio score (LOD) 3.4, 91.8 cM), 3 (LOD 3.6, 50.3 cM), and 8 (LOD 4.2, 60.1 cM) and one suggestive QTL on Chr 9 (LOD 2.5, 33.9 cM). Loading-induced increases in PC and Cth were influenced by four significant loci on Chrs 8 (LOD 3.0, 68.9 cM), 9 (LOD 3.0, 13.1 cM), 17 (LOD 3.0, 39.3 cM), and 18 (LOD 3.0, 0 cM) and two suggestive loci on Chr 9 (LOD 2.2, 24 cM) and 11 (LOD 2.1, 69.9 cM). Pairwise analysis showed the presence of several significant and suggestive interactions between loci on Chrs 1, 3, 8, and 13 for BMD trait. This is the first study that provides evidence for the presence of multiple genetic loci regulating bone anabolic responses to loading in the B6xC3H intercross. Knowledge of the genes underlying these loci could provide novel approaches to improve skeletal mass.

Adaptation, Biological↗
PubMed2006

Up-regulation of the Wnt, estrogen receptor, insulin-like growth factor-I, and bone morphogenetic protein pathways in C57BL/6J osteoblasts as opposed to C3H/HeJ osteoblasts in part contributes to the differential anabolic response to fluid shear.

C57BL/6J (B6), but not C3H/HeJ (C3H), mice responded to mechanical loading with an increase in bone formation. A 30-min steady fluid shear of 20 dynes/cm(2) increased [(3)H]thymidine incorporation and alkaline phosphatase activity and up-regulated the expression of early mechanoresponsive genes (integrin beta1 (Igtb1) and cyclooxygenase-2 (Cox-2)) in B6 but not C3H osteoblasts, indicating that the differential mechanosensitivity was intrinsic to osteoblasts. In-house microarray analysis with 5,500 gene fragments revealed that the expression of 669 genes in B6 osteoblasts and 474 genes in C3H osteoblasts was altered 4 h after the fluid shear. Several genes associated with the insulin-like growth factor (IGF)-I, the estrogen receptor (ER), the bone morphogenetic protein (BMP)/transforming growth factor-beta, and Wnt pathways were differentially up-regulated in B6 osteoblasts. In vitro mechanical loading also led to up-regulation of these genes in the bones of B6 but not C3H mice. Pretreatment of B6 osteoblasts with inhibitors of the Wnt pathway (endostatin), the BMP pathway (Noggin), or the ER pathway (ICI182780) blocked the fluid shear-induced proliferation. Inhibition of integrin and Cox-2 activation by echistatin and indomethacin, respectively, each blocked the fluid shear-induced up-regulation of genes associated with these four pathways. In summary, up-regulation of the IGF-I, ER, BMP, and Wnt pathways is involved in mechanotransduction. These four pathways are downstream to the early mechanoresponsive genes, i.e. Igtb1 and Cox-2. In conclusion, differential up-regulation of these anabolic pathways may in part contribute to the good and poor response, respectively, in the B6 and C3H mice to mechanical loading.

Animals↗
PubMed2005

Global gene expression analysis in the bones reveals involvement of several novel genes and pathways in mediating an anabolic response of mechanical loading in mice.

To identify the genes and signal pathways responsible for mechanical loading-induced bone formation, we evaluated differential gene expression on a global basis in the tibias of C57BL/6J (B6) mice after four days of four-point bending. We applied mechanical loads to the right tibias of the B6 mice at 9 N, 2 Hz for 36 cycles per day, with the left tibias used as unloaded controls. RNA from the tibias was harvested 24 h after last stimulation and subjected to microarray. Of the 20,280 transcripts hybridized to the array, 346 were differentially expressed in the loaded bones compared to the controls. The validity of the microarray data was established with the increased expression of bone-related genes such as pleiotrophin, osteoglycin, and legumain upon four-point bending and confirmation of increased expression of selected genes by real-time PCR. The list of differentially expressed genes includes genes involved in cell growth, differentiation, adhesion, proteolysis, as well as signaling molecules of receptors for growth factors, integrin, Ephrin B2, endothelin, and adhesion G protein coupled receptor. Pathway analyses suggested that 28 out of the 346 genes exhibited a direct biological association. Among the biological network, fibronectin and pleitrophin function as important signaling molecules in regulating periosteal bone formation and resorption in response to four-point bending. Furthermore, some expressed sequence tags (ESTs) with no prior known function have been identified as potential mediators of mechanotransduction signaling pathways. Further studies on these previously unknown genes will improve our understanding of the molecular pathways and mechanisms involved in bone's response to mechanical stress.

Anabolic Agents↗
PubMed2005

Mechanical loading-induced gene expression and BMD changes are different in two inbred mouse strains.

Our goal is to evaluate skeletal anabolic response to mechanical loading in different age groups of C57B1/6J (B6) and C3H/HeJ (C3H) mice with variable loads using bone size, bone mineral density (BMD), and gene expression changes as end points. Loads of 6-9 N were applied at 2 Hz for 36 cycles for 12 days on the tibia of 10-wk-old female B6 and C3H mice. Effects of a 9-N load on 10-, 16-, and 36-wk-old C3H mice were also studied. Changes in bone parameters were measured using peripheral quantitative computed tomography, and gene expression was determined by real-time PCR. Total volumetric BMD was increased by 5 and 15%, respectively, with 8- and 9-N loads in the B6, but not the C3H, mice. Increases of 20 and 12% in periosteal circumference were reflected by dramatic 44 and 26% increases in total area in B6 and C3H mice, respectively. The bone response to bending showed no difference in the three age groups of B6 and C3H mice. At 2 days, mechanical loading resulted in significant downregulation in expression of bone resorption (BR), but not bone formation (BF) marker genes. At 4 and 8 days of loading, expression of BF marker genes (type I collagen, alkaline phosphatase, osteocalcin, and bone sialoprotein) was increased two- to threefold and expression of BR marker genes (matrix metalloproteinase-9 and thrombin receptor-activating peptide) was decreased two- to fivefold. Although expression of BF marker genes was upregulated four- to eightfold at 12 days of training, expression of BR marker genes was upregulated seven- to ninefold. Four-point bending caused significantly greater changes in expression of BF and BR marker genes in bones of the B6 than the C3H mice. We conclude that mechanical loading-induced molecular pathways are activated to a greater extent in the B6 than in the C3H mice, resulting in a higher anabolic response in the B6 mice.

Alkaline Phosphatase↗
PubMed2005

Morphological and growth altering effects of Cisplatin in C. albicans using fluorescence microscopy.

Changes in morphology and growth curve of Candida albicans in response to treatment by Cisplatin has been studied using fluorescence staining with ethidium bromide. Treatment with Cisplatin was found to markedly inhibit hyphae and ovoid growth as revealed by ethidium bromide staining of drug treated cells. These changes were concomitant with inhibitory effects on the growth curve with respect to untreated cells. Presence of Cisplatin not only caused suppression in the limiting values in the growth curve, but also caused a slight left shift in the EC50 values. Some of the ovoid cells undergoing poisoning with cisplatin were found to be unusually enlarged before undergoing their natural fate thus suggesting formation of similar cytotoxic end products with DNA.

Candida albicans↗
PubMed2004

HSV-1 amplicon-mediated transfer of 128-kb BMP-2 genomic locus stimulates osteoblast differentiation in vitro.

In previous studies, we developed mouse genetic models and discovered genetic components of quantitative trait loci on mouse chromosomes that contribute to phenotypes such as bone size, bone density, and fracture healing. However, these regions contain dozens of genes in several overlapping bacterial artificial chromosomes (BACs) and are difficult to clone by physical cloning strategies. A feasible and efficient approach of identifying candidate genes is to transfer the genomic loci in BAC clones into mammalian cells for functional studies. In this study, we retrofitted a BAC construct into herpes simplex virus-1 amplicon and packaged it into an infectious BAC (iBAC) to test gene function in a cell-based system, using a 128-kb clone containing the complete bone morphogenetic protein-2 (BMP-2) gene. We transduced MC3T3-E1 cells with the iBAC bearing BMP-2 gene and examined transgene expression and function. Our results have demonstrated that an iBAC can efficiently deliver a BMP-2 genomic locus into preosteoblast cells and express functional BMP-2 protein, inducing a phenotype of cell differentiation, as indicated by an increase in alkaline phosphatase activity. Therefore, this experimental system provides a rapid, efficient cell-based model of high-throughput phenotypic screening to identify the BAC clones from physically mapped regions that are important for osteoblast differentiation. It also illustrates the potential of iBAC technology in functional testing of single nucleotide polymorphisms located in the distal promoter or/and intron regions responsible for low bone density.

3T3 Cells↗