Biomedical subjects

Charles A Haynes

Publications and source records attributed to Charles A Haynes.

At least 19 recordsLinked to original sources

PubMed2007

The influence of grafted polymer architecture and fluid hydrodynamics on protein separation by entropic interaction chromatography.

Entropic interaction chromatography (EIC) provides efficient size-based separation of protein mixtures through the entropy change associated with solute partitioning into a layer of hydrophilic homopolymer that has been end-grafted within the pores of a macroporous chromatography support. In this work, surface-initiated atom-transfer radical polymerization (ATRP) is used to prepare a library of EIC stationary phases covering a wide range of grafted-chain densities and molecular weights. Exhaustive chain cleavage and analysis by saponification and GPC-MALLS, respectively, show that the new ATRP synthesis procedure allows for excellent control over graft molecular weight and polydispersity. The method is used to prepare high-density grafts (up to 0.164 +/- 0.005 chains/nm(2)) that extend the range of EIC applications to include efficient buffer-exchange and desalting of protein preparations. Reducing the graft density allows for greater partitioning of high molecular weight solutes, extending the linear range of the selectivity curve. Increasing graft molecular weight also alters selectivity, but more directly affects column capacity by increasing the volume of the grafted layer. Protein partitioning in high-density EIC columns is found to decrease with mobile-phase velocity (u). Although solute mass transfer resistances leading to an increase in plate height can explain this effect, pressure drop data across the column are indicative of weak convective flow through at least a fraction of the grafted architecture. Modeling of the grafted brush properties in the presence of solvent flow by subjecting a self-consistent-field theory representation of the brush to a viscous shear force predicts that the grafted chains will tilt and elongate in the direction of flow. The shear force may therefore act to reduce the number of conformations available to chains, increasing their rigidity without significantly altering the thickness of the grafted layer. A reduction in protein partitioning is then predicted when the dependence on u of the solute entropy loss is stronger than that of the grafted polymer, a condition met at high graft densities.

Chromatography, Gel↗

PubMed2006

Optimizing the rotor design for controlled-shear affinity filtration using computational fluid dynamics.

Controlled shear affinity filtration (CSAF) is a novel integrated processing technology that positions a rotor directly above an affinity membrane chromatography column to permit protein capture and purification directly from cell culture. The conical rotor is intended to provide a uniform and tunable shear stress at the membrane surface that inhibits membrane fouling and cell cake formation by providing a hydrodynamic force away from and a drag force parallel to the membrane surface. Computational fluid dynamics (CFD) simulations are used to show that the rotor in the original CSAF device (Vogel et al., 2002) does not provide uniform shear stress at the membrane surface. This results in the need to operate the system at unnecessarily high rotor speeds to reach a required shear stress of at least 0.17 Pa at every radial position of the membrane surface, compromising the scale-up of the technology. Results from CFD simulations are compared with particle image velocimetry (PIV) experiments and a numerical solution for low Reynolds number conditions to confirm that our CFD model accurately describes the hydrodynamics in the rotor chamber of the CSAF device over a range of rotor velocities, filtrate fluxes, and (both laminar and turbulent) retentate flows. CFD simulations were then carried out in combination with a root-finding method to optimize the shape of the CSAF rotor. The optimized rotor geometry produces a nearly constant shear stress of 0.17 Pa at a rotational velocity of 250 rpm, 60% lower than the original CSAF design. This permits the optimized CSAF device to be scaled up to a maximum rotor diameter 2.5 times larger than is permissible in the original device, thereby providing more than a sixfold increase in volumetric throughput.

Animals↗

PubMed2006

A multiple chemical equilibria approach to modeling and interpreting the separation of amino acid enantiomers by chiral ligand-exchange chromatography.

A model of chiral ligand-exchange chromatography (CLEC) is presented that combines the non-ideal equilibrium-dispersion equation for solute transport with equations describing all chemical equilibria within the column. The model connects elution band profiles to the time and space resolved formation of diastereomeric complexes in both the mobile and stationary phases, thereby providing insights into the overall separation mechanism. The stoichiometries and formation constants for all equilibrium complexes formed in the mobile phase are taken from standard thermodynamic databases and independent potentiometric titration experiments. Formation constants for complexes formed with the stationary phase ligand are determined from potentiometric titration data for a water-soluble analogue of the ligand. Together this set of pure thermodynamic parameters can be used to calculate the equilibrium composition of the system at any operating condition. The model includes a temperature-dependent pure-component parameter, determined by regression to a single elution band for the pure component, that corrects for subtle effects associated with immobilizing the ligand (i.e., the chiral selector) onto the stationary phase. Model performance is assessed through comparison with chromatograms for two hydrophobic amino acid racemates loaded on the Nucleosil Chiral-1 CLEC column. The model is also applied to a restricted optimization of column operating conditions to assess its predictive power. In both cases, model predictions compare well with experiment while also providing a molecular understanding of the separation process and its dependence on column operating conditions.

Amino Acids↗

PubMed2006

Minimizing loss of sequence information in SAGE ditags by modulating the temperature dependent 3' --> 5' exonuclease activity of DNA polymerases on 3'-terminal isoheptyl amino groups.

Numerous steps are required to prepare a sequencing library for serial analysis of gene expression (or SAGE) from an original mRNA sample. The presence of inefficiencies, however, can lead to a cumulative loss of sample during processing which can yield a library of short sequence tags (SSTs) that represents only a minute fraction of the original starting sample, potentially compromising the quality of the analysis and necessitating relatively large amounts of starting material. We show here that commonly observed higher molecular weight (HMW) amplification products observed following the PCR amplification of ditags are a direct result of the presence of HMW ligation products created during ditag formation. Using model tags, we demonstrate that the formation of these HMW ligation products becomes permissible following the release of the 3'-terminal isoheptyl amine (3'-IHA) from the SST during the fill-in reaction with the Klenow fragment (KF) of DNA polymerase (DNAP) I and is mediated by its 3' --> 5' exonuclease activity. We further show that the incorporation of SSTs into HMW ligation products can lead to a loss of sequence information from SAGE analysis, potentially skewing sequencing results away from the true distribution in the original sample. By modifying fill-in conditions through the use of Vent DNAP at 12 degrees C and by including terminal phosphorothioate linkages within the SAGE adaptors to specifically inhibit exonucleolytic removal of the 3'-terminal amine, we are able to maximize the yield of ditags and bypass the need for gel purification via PAGE following PCR. The modifications described here, combined with the modifications described previously by our group for adaptor ligation, ensure that the full sequence information content in SSTs derived from the transcriptome is preserved in the pool of amplified ditags prior to the creation of a SAGE library.

3' Untranslated Regions↗

PubMed2006

Affinity-tagged green fluorescent protein (GFP) extraction from a clarified E. coli cell lysate using a two-phase aqueous micellar system.

Green fluorescent protein (GFP) has been proposed as an ideal choice for a protein-based biological indicator for use in the validation of decontamination or disinfection treatments. In this article, we present a potentially scalable and cost-effective way to purify recombinant GFP, produced by fermentation in Escherichia coli, by affinity-enhanced extraction in a two-phase aqueous micellar system. Affinity-enhanced partitioning, which improves the specificity and yield of the target protein by specific bioaffinity interactions, has been demonstrated. A novel affinity tag, family 9 carbohydrate-binding module (CBM9) is fused to GFP, and the resulting fusion protein is affinity-extracted in a decyl beta-D-glucopyranoside (C10G1) two-phase aqueous micellar system. In this system, C10G1 acts as phase forming and as affinity surfactant. We will further demonstrate the implementation of this concept to attain partial recovery of affinity-tagged GFP from a clarified E. coli cell lysate, including the simultaneous removal of other contaminating proteins. The cell lysate was partitioned at three levels of dilution (5x, 10x, and 40x). Irrespective of the dilution level, CBM9-GFP was found to partition preferentially to the micelle-rich phase, with the same partition coefficient value as that found in the absence of the cell lysate. The host cell proteins from the cell lysate were found to partition preferentially to the micelle-poor phase, where they experience less excluded-volume interactions. The demonstration of proof-of-principle of the direct affinity-enhanced extraction of CBM9-GFP from the cell lysate represents an important first step towards developing a cost-effective separation method for GFP, and more generally, for other proteins of interest.

Affinity Labels↗

PubMed2005

Interpreting the effects of temperature and solvent composition on separation of amino-acid racemates by chiral ligand-exchange chromatography.

Routinely applied at both preparative and analytical scales, chiral ligand-exchange chromatography (CLEC) separates enantiomers capable of chelating a divalent transition-metal-ion through a pair of coordinating electronegative atoms. CLEC separation efficiencies are strongly dependent on column operating conditions, including temperature and mobile-phase solvent composition. Although previous empirical studies provide some useful guidelines for optimizing column operating conditions, the fundamental mechanisms underlying the unusually high sensitivity of CLEC performance to operating temperature and solvent composition remain poorly understood, limiting efforts to develop a comprehensive model for the technology. To address this problem, we report transport and chemical equilibria data for the separation of alpha-amino acids on a Nucleosil chiral-1 column presenting L-hydroxyproline as the immobilized ligand. Solute transport is found to be limited by pore diffusion at all column operating temperatures and solvent compositions, validating the existence of local equilibria throughout the column. Changes in separation performance are found to correlate with changes in chemical equilibria, emphasizing the need to carefully account for all speciation within the column when modeling CLEC and providing important fundamental data to achieve this goal. Each enantiomer participates in a large number of solution-phase complexes. As a result, the thermodynamic driving force for separation is unusually complex, allowing subtle changes in column operating conditions to mediate significant changes in speciation profiles and separation efficiency. A reaction-equilibria model accounting for all speciation within the CLEC column is proposed and used to estimate enantiomer partition coefficients and retention times.

Amino Acids↗

PubMed2005

Dynamic localization and persistent stimulation of factor-dependent cells by a stem cell factor / cellulose binding domain fusion protein.

The extracellular matrix provides structural components that support the development of tissue morphology and the distribution of growth factors that modulate the overall cellular response to those growth factors. The ability to manipulate the presentation of factors in culture systems should provide an additional degree of control in regulating the stimulation of factor-dependent cells for tissue engineering applications. Cellulose binding domain (CBD) fusion protein technology facilitates the binding of bioactive cytokines to cellulose materials, and has permitted the analysis of several aspects of cell stimulation by surface-localized growth factors. We previously reported the synthesis and initial characterization of a fusion protein comprised of a CBD and murine stem cell factor (SCF) (Doheny et al. [1999] Biochem J 339:429-434). A significant advantage of the CBD fusion protein system is that it permits the stimulation of factor-dependent cells with localized growth factor, essentially free of nonfactor-derived interactions between the cell and matrix. In this work, the long-term stability and bioactivity of SCF-CBD fusions adsorbed to microcrystalline cellulose under cell culture conditions is demonstrated. Cellulose-bound SCF-CBD is shown to stimulate receptor polarization in the cell membrane and adherence to the cellulose matrix. In addition, cellulose-surface presentation of the SCF-CBD attenuates c-kit dephosphorylation kinetics, potentially modulating the overall response of the cell to the SCF signal.

Animals↗

PubMed2005

Entropic interaction chromatography: separating proteins on the basis of size using end-grafted polymer brushes.

Partitioning of a macromolecule into the interfacial volume occupied by a grafted polymer brush decreases the configurational entropy (DeltaSbrush(c)) of the terminally attached linear polymer chains due to a loss of free volume. Self-consistent field theory (SCF) calculations are used to show that DeltaSbrush(c) is a strong function of both the size (MWp) of the partitioning macromolecule and the depth of penetration into the brush volume. We further demonstrate that the strong dependence of DeltaSbrush(c) on MWp provides a novel and powerful platform, which we call entropic interaction chromatography (EIC), for efficiently separating mixtures of proteins on the basis of size. Two EIC columns, differing primarily in polymer grafting density, were prepared by growing a brush of poly(methoxyethyl acrylamide) chains on the surface of a wide-pore (1,000-A pores, 64-microm diameter rigid beads) resin (Toyopearl AF-650M) bearing surface aldehyde groups. Semipreparative 0.1-L columns packed with either EIC resin provide reduced-plate heights of 2 or less for efficient separation of globular protein mixtures over at least three molecular-weight decades. Protein partitioning within these wide-pore EIC columns is shown to be effectively modeled as a thermodynamically controlled process, allowing partition coefficients (K(P)) and elution chromatograms to be accurately predicted using a column model that combines SCF calculation of K(P) values with an equilibrium-dispersion type model of solute transport through the column. This model is used to explore the dependence of column separation efficiency on brush properties, predicting that optimal separation of proteins over a broad MWp range is achieved at low to moderate grafting densities and intermediate chain lengths.

Acrylamides↗

PubMed2005

Energy landscapes for adsorption of a protein-like HP chain as a function of native-state stability.

Dynamic Monte Carlo (DMC) simulations of the adsorption of simple protein-like chains are used to more clearly define the molecular basis for the dependence of adsorption thermodynamics on the stability of the unique lowest-energy "native state" conformation of the chain. Arai and Norde were among the first to show that proteins of low native-state stability strongly denature upon adsorption to weakly attractive sorbent surfaces, while relatively modest changes in conformation are observed in stable proteins under identical adsorption conditions. When the protein has a low native-state stability, favorable adsorption entropies are typically observed in such systems, leading to the general belief that the chain gains conformational entropy during adsorption through a net reduction in intramolecular interactions specific to the native-state structure. Analysis of energy landscapes generated from our DMC simulation results show that a net loss in specific intramolecular interactions can lead to a positive delta(ads)S under certain adsorption conditions. However, the influence of chain conformation on delta(ads)S is found to correlate more directly with the manner in which the unique states of the system are distributed among the energy levels available to the adsorbed chain. Delta(ads)S is found to tend toward a maximum for adsorption processes described by thermally averaged energy landscapes in which the energy levels carrying the highest Boltzmann weights have a high degree of conformational degeneracy. This condition is met when the average interaction energy between the chain and the sorbent equals that between two hydrophobic segments of the chain.

Adsorption↗

PubMed2005

Affinity-enhanced protein partitioning in decyl beta-D-glucopyranoside two-phase aqueous micellar systems.

Liquid-liquid extraction in two-phase aqueous complex-fluid systems has been proposed as a scalable, versatile, and cost-effective purification method for the downstream processing of biotechnological products. In the case of two-phase aqueous micellar systems, careful choices of the phase-forming surfactants or surfactant mixtures allow these systems to separate biomolecules based on size, hydrophobicity, charge, or specific affinity. In this article, we investigate the affinity-enhanced partitioning of a model affinity-tagged protei--green fluorescent protein fused to a family 9 carbohydrate-binding module (CBM9-GFP)--in a two-phase aqueous micellar system generated from the nonionic surfactant n-decyl beta-D-glucopyranoside (C10G1), which acts simultaneously as the phase-former and the affinity ligand. In this simple system, CBM9-GFP was extracted preferentially into the micelle-rich phase, despite the opposing tendency of the steric, excluded-volume interactions operating between the protein and the micelles. We obtained more than a sixfold increase (from 0.47 to 3.1) in the protein partition coefficient (Kp), as compared to a control case where the affinity interactions were "turned off" by the addition of a competitive inhibitor (glucose). It was demonstrated conclusively that the observed increase in Kp can be attributed to the specific affinity between the CBM9 domain and the affinity surfactant C10G1, suggesting that the method can be generally applied to any CBM9-tagged protein. To rationalize the observed phenomenon of affinity-enhanced partitioning in two-phase aqueous micellar systems, we formulated a theoretical framework to model the protein partition coefficient. The modeling approach accounts for both the excluded-volume interactions and the affinity interactions between the protein and the surfactants, and considers the contributions from the monomeric and the micellar surfactants separately. The model was shown to be consistent with the experimental data, as well as with our current understanding of the CBM9 domain.

Chromatography, Affinity↗

PubMed2005

Mesoscopic dynamic Monte Carlo simulations of the adsorption of proteinlike HP chains within laterally constricted spaces.

Two-dimensional dynamic Monte Carlo simulations are applied to the protein-like HP chain model to investigate the influence of lateral confinement of the adsorbed chain on adsorption thermodynamics and the ensemble of accessible chain conformations. The structure of the model makes it possible to enumerate all possible chain conformations and thereby define with precision the relation between adsorption thermodynamics and changes in accessible chain conformations resulting from the adsorption process. Lateral confinement of the adsorbed chain is shown to dramatically reduce the number of accessible energy states and unique chain conformations such that, under certain conditions, adsorption is predicted to actually stabilize the chain against denaturation. Lateral confinement preferentially eliminates expanded conformations of the adsorbed chain, shifting the equilibrium from the unfolded state toward the native state. As a result, the conformational entropy of the adsorbed chain is predicted to be lower than that of the chain free in solution. The protein-like HP chain responds to an increase in the hydrophobicity of the sorbent surface by strongly favoring those conformations that minimize the overall internal energy of the system. As a result, adsorption severely destabilizes the native-state conformation. The ability of our simulation results to provide insights into underlying mechanisms for nonspecific protein adsorption is illustrated through qualitative comparison with activity data for hen egg-white lysozyme adsorbed on silica at different surface concentrations.

Adsorption↗

PubMed2005

Calorimetric studies of melanotransferrin (p97) and its interaction with iron.

The mammalian molecule melanotransferrin (mTf), also called p97, is a member of the transferrin family of molecules. It exists in both secreted and glycosylphosphatidylinositol-anchored forms and is thought to play a role in angiogenesis and in transporting iron across the blood brain barrier. The binding affinity of iron to this molecule has not been formally established. Here, the binding of ferric ion (chelated with a 2-fold molar ratio of nitrilotriacetate) to mTf has been studied using isothermal titration calorimetry and differential scanning calorimetry. One iron-binding site was determined for mTf with similar binding characteristics to other transferrins. In the absence of bicarbonate, binding occurs quickly with an apparent association constant of 2.6 x 10(7) M(-1) at 25 degrees C. The presence of bicarbonate introduces kinetic effects that prevent direct determination of the apparent binding constant by isothermal titration calorimetry. Differential scanning calorimetry thermograms of mTf unfolding in the presence and absence of iron were therefore used to determine the apparent binding constant in the bicarbonate-containing system; at pH 7.5 and 25 degrees C, iron binding occurs in a 1:1 ratio with a K(app) of 4.4 x 10(17) M(-1). This affinity is intermediate between the high and low affinity lobes of transferrin and suggests that mTf is likely to play a significant role in iron transport where the high affinity lobe of transferrin is occupied or where transferrin is in proportionally low concentrations.

Animals↗

PubMed2004

Inexpensive one-step purification of polypeptides expressed in Escherichia coli as fusions with the family 9 carbohydrate-binding module of xylanase 10A from T. maritima.

A novel inexpensive affinity purification technology is described based on recombinant expression in Escherichia coli of the polypeptide or protein target fused through its N-terminus to TmXyn10ACBM9-2 (CBM9), the C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima. Measured association constants (K(a)) for adsorption of CBM9 to insoluble allomorphs of cellulose are between 2 x 10(5) and 8 x 10(6) M(-1). CBM9 also binds a range of soluble sugars, including glucose. As a result, a 1M glucose solution is effective in eluting CBM9 and CBM9-tagged fusion proteins from a very inexpensive commercially-available cellulose-based capture column. A processing site is encoded at the C-terminus of the tag to facilitate its rapid and quantitative removal by Factor X(a) to recover the desired target protein sequence following affinity purification. Fusion of the CBM9 affinity tag to the N-terminus of green fluorescent protein (GFP) from the jellyfish, Aquorin victoria, is shown to yield >200 mgl(-1) of expressed soluble fusion protein that can be affinity separated from clarified cell lysate to a purity of >95% at a yield of 86%.

Base Sequence↗

PubMed2004

Specificity of the synergistic anion for iron binding by ferric binding protein from Neisseria gonorrhoeae.

Ferric binding protein in Neisseria gonorrhoeae (nFbpA) transports iron from outer membrane receptors for host proteins across the periplasm to a permease in an alternative pathway to the use of siderophores in some pathogenic bacteria. Phosphate and nitrilotriacetate, both at pH 8, and vanadate at pH 9 are shown to be synergistic in promoting ferric binding to nFbpA, in contrast to carbonate and sulfate. Interestingly, only phosphate produces the fully closed conformation of nFbpA as defined by native electrophoresis. The role of phosphate was probed by constructing three mutants: Q58E, Q58R, and G140H. The anion and iron binding properties of the Q58E mutant are similar to the wild-type protein, implying that one phosphate oxygen is a hydrogen bond donor and may in part define the specificity of nFbpA for phosphate over sulfate. Phosphate is a weakly synergistic anion in the Q58R and G140H mutants, and these mutants do not form completely closed structures. Ferric binding was investigated by both isothermal titration and differential scanning calorimetry. The apparent affinity of nFbpA for iron in a solution of 30 mM citrate is 1 order of magnitude larger in the presence (K(app)= 1.7 x 10(5) M(-1)) of phosphate than in its absence (K(app) = 1.6 x 10(4) M(-1)) at pH 7. Similar results were obtained at pH 8. This increase in affinity with phosphate as well as the formation of closed structure allows nFbpA to compete for free ferric ions in solution and suggests that ferric binding to nFbpA is regulated by the synergistic phosphate anion at sites of iron uptake.

Amino Acid Substitution↗

PubMed2004

Mesoscopic analysis of conformational and entropic contributions to nonspecific adsorption of HP copolymer chains using dynamic Monte Carlo simulations.

Dynamic Monte Carlo simulations of short linear HP-type copolymers exhibiting proteinlike characteristics are used to investigate both chain dynamics and changes in chain conformational entropy and their contributions to the energetics of adsorption onto a solid-liquid interface. The dMC results show that the conformations and energies of adsorbed chains are highly degenerate. The ensemble-averaged energy of the adsorbed state is dependent on temperature, chain sequence, native-state stability, and sorbent surface geometry and hydrophobicity. Mesoscopic thermodynamic analyses reveal that, although increased chain conformational entropy contributes to the driving force for adsorption in certain cases, many conditions exist where the change in conformational entropy is either negligible or unfavorable due to constraints imposed by the need to form a large and specific number of favorable intra- and intermolecular contacts and by the impenetrable nature of the sorbent surface. Step-number-averaged energy trajectories, based on sampling of a large number of energy trajectories and thus conformational states at each step number, suggest that the search for a global energy minimum is gradual, so that adsorption is first reversible but becomes apparently irreversible with longer exposure to the sorbent. These results appear to be connected to the conformational adaptability of the chain both on the surface and in solution, and an adsorption model taking chain conformational dynamics into account is proposed.

Journal Article↗

PubMed2004

Increasing the efficiency of SAGE adaptor ligation by directed ligation chemistry.

The ability of Serial Analysis of Gene Expression (SAGE) to provide a quantitative picture of global gene expression relies not only on the depth and accuracy of sequencing into the SAGE library, but also on the efficiency of each step required to generate the SAGE library from the starting mRNA material. The first critical step is the ligation of adaptors containing a Type IIS recognition sequence to the anchored 3' end cDNA population that permits the release of short sequence tags (SSTs) from defined sites within the 3' end of each transcript. Using an in vitro transcript as a template, we observed that only a small fraction of anchored 3' end cDNA are successfully ligated with added SAGE adaptors under typical reaction conditions currently used in the SAGE protocol. Although the introduction of approximately 500-fold molar excess of adaptor or the inclusion of 15% (w/v) PEG-8000 increased the yield of the adaptor-modified product, complete conversion to the desired adaptor:cDNA hetero-ligation product is not achieved. An alternative method of ligation, termed as directed ligation, is described which exploits a favourable mass-action condition created by the presence of NlaIII during ligation in combination with a novel SAGE adaptor containing a methylated base within the ligation site. Using this strategy, we were able to achieve near complete conversion of the anchored 3' end cDNA into the desired adaptor-modified product. This new protocol therefore greatly increases the probability that a SST will be generated from every transcript, greatly enhancing the fidelity of SAGE. Directed ligation also provides a powerful means to achieve near-complete ligation of any appropriately designed adaptor to its respective target.

Combinatorial Chemistry Techniques↗

PubMed2002

Self-activating factor X derivative fused to the C-terminus of a cellulose-binding module: Production and properties.

In this work, a new derivative of FX was engineered. It comprises a cellulose-binding module (CBM) fused to the N-terminus of the truncated light chain (E2FX) of FX and a hexahistidine tag (H6) fused to the C-terminus of the heavy chain. The sequence LTR at the site of cleavage of the activation peptide from the N-terminus of the heavy chain is changed to IEGR to render the derivative self-activating. However, N-linked glycans on the CBM of the derivative blocked its binding to cellulose and those on the activation peptide slowed its activation. Therefore, the sites of N-linked glycosylation on the CBM and on the activation peptide were eliminated by mutation. The final derivative can be produced in good yield by cultured mammalian cells. It is purified easily with Ni(2+)-agarose, it is self-activating, and it can be immobilized on cellulose. When immobilized on a column of cellulose beads, the activated derivative retains approximately 80% of its initial activity after 30 days of continuous hydrolysis of a fusion protein substrate. Under these conditions of operation, the effective substrate:enzyme ratio is >10(4).

Animals↗

PubMed2002

Carbohydrate-binding modules recognize fine substructures of cellulose.

Competition isotherms are used to identify the set of cellulose substructures to which cellulose binding modules (CBMs) from families 2a, 3, 4, 9, and 17 bind. The experiments are based on coupling a unique fluorescent tag to each CBM in a manner that does not alter the natural binding properties of the CBM and therefore allows the surface and solution concentrations of each CBM to be monitored as a function of time and composition. Adsorption and surface exchange of like or competing CBMs are monitored using a range of cellulose preparations varying in both crystallinity and provenance. CBMs from families 2a, 3, 4, 9, and 17 are shown to recognize different physical forms of prepared cellulose. The demonstration of the very fine binding specificity of cellulose-specific CBMs implies that the polysaccharide targets of CBMs extend down to the resolution of cellulose microstructures.

Binding Sites↗