PubMed Health⌕ Search

Biomedical subjects

Charles C Han

Publications and source records attributed to Charles C Han.

15 recordsLinked to original sources

Crystallization behaviors of n-nonadecane in confined space: observation of metastable phase induced by surface freezing.

Crystallization and phase transition behaviors of n-nonadecane in microcapsules with a diameter of about 5 mum were studied with the combination of differential scanning calorimetry (DSC) and synchrotron radiation X-ray diffraction (XRD). As evident from the DSC measurement, a surface freezing monolayer, which is formed in the microcapsules before the bulk crystallization, induces a novel metastable rotator phase (R(II)), which has not been reported anywhere else. We argue that the existence of the surface freezing monolayer decreases the nucleating potential barrier of the R(II) phase and induces its appearance, while the lower free energy in the confined geometry turns the transient R(II) phase to a "long-lived" metastable phase.

Journal Article↗

Interplay between two phase transitions: crystallization and liquid-liquid phase separation in a polyolefin blend.

The interplay between liquid-liquid phase separation (LLPS) and crystallization at several compositions in statistical copolymer blends of poly(ethyleneco-hexene) and poly(ethylene-cobutene) has been examined by optical microscopy (OM), atomic force microscopy (AFM), and differential scanning calorimetry (DSC). The phase contrast optical microscopy shows interconnected bicontinuous structures for deeply quenched LLPS, characteristic of spinodal decomposition. After a second quench to a temperature below the melting point, an overwhelming change in crystallization kinetics has been clearly observed, which is caused by the increase of the nucleation rate assisted by concentration fluctuations due to the spontaneous spinodal LLPS. We propose a new mechanism of "fluctuation assisted nucleation" in the crystallization process for such interactive process in a blend system. The experimental results from OM, AFM, and DSC measurements at various conditions are all consistent with the fluctuation assisted nucleation model.

Journal Article↗

Fabry-Perot fringes and their application to study the film growth, chain rearrangement, and erosion of hydrogen-bonded PVPON/PAA films.

We observed Fabry-Perot fringes in the absorption spectra of hydrogen-bonded layer-by-layer (LBL) films of poly(vinyl pyrrolidone) (PVPON) and poly(acrylic acid) (PAA), which stem from the interferences between beams transmitted and partially reflected at the highly smooth film-air interface and film-quartz interface. The appearance and disappearance of Fabry-Perot fringes can be used to evaluate the homogeneity of the film. They also provide information about the film thickness. Using this optical phenomenon, with a minimal requirement of instrumentation, we studied the effect of several experimental conditions on the film buildup and structure. The film grows linearly with dipping cycles. Films fabricated from higher molecular weight polymers tend to be thicker. Increasing the concentration of the assembly solutions can also make thicker films. However, films from high molecular weight polymers or high concentration assembly solutions may be heterogeneous and do not display Fabry-Perot fringes in their absorption spectra. The defects in these heterogeneous films can be healed by a postannealing in water or diluted HCl to allow the chain rearrangement to complete. We further found the PVPON/PAA films can be eroded by long-term annealing in water or diluted HCl by monitoring the movement of the Fabry-Perot fringes. In most cases, the erosion rate is constant with annealing time. The erosion rate decreases with a decrease in the pH of the media and an increase in the molecular weight of the polymers.

Journal Article↗

Effects of confinement on the order-disorder transition of diblock copolymer melts.

The effects of confinement on the order-disorder transition of diblock copolymer melts are studied theoretically. Confinements are realized by restricting diblock copolymers in finite spaces with different geometries (slabs, cylinders, and spheres). Within the random phase approximation, the correlation functions are calculated using the eigenvalues and eigenfunctions of the Laplacian operator inverted Delta(2) in the appropriate geometries. This leads to a size-dependent scattering function, and the minimum of the inverse scattering function determines the spinodal point of the homogeneous phase. For diblock copolymers confined in a slab or in a cylindrical nanopore, the spinodal point of the homogeneous phase (chiN)(s) is found to be independent of the confinement. On the other hand, for diblock copolymers confined in a spherical nanopore, (chiN)(s) depends on the confinement and it oscillates as a function of the radius of the sphere. Further understanding of the finite-size effects is provided by examining the fluctuation modes using the Landau-Brazovskii model.

Journal Article↗

Aggregation behavior in mixed system of double-chained anionic surfactant with single-chained nonionic surfactant in aqueous solution.

The aggregation behavior of mixed systems of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) or sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) with nonionic surfactant pentaethylene glycol mono-n-dodecyl ether (C12E5) have been studied by means of steady-state fluorescence, electrical conductivity, dynamic light scattering, transmission electron microscopy, electrophoretic light scattering and pyrene solubilization measurements. The critical concentrations for aggregation, micropolarity, mobility, solubilization capacity and morphology of aggregates are characterized. Two critical concentrations for aggregation are observed in the mixed surfactants, which may correspond to the formation of different kinds of aggregates. Moreover, it is more favorable for AOT-C12E5 to form mixed vesicles compared to SBPBS-C12E5 at higher mole fraction of C12E5. In addition, it is revealed that SBPBS-C12E5 mixture has larger solubilization capacity for pyrene than AOT-C12E5 system.

Journal Article↗

Micellelike aggregates in solutions of semirigid hairy-rod polymers.

An anomalous aggregation of hairy-rod segments generating nanoscale disklike domains is found to occur in the solution of the semirigid polymer at concentrations well below the threshold lyotropic concentration. These aggregate domains are micellelike in the sense that they exist in equilibrium with a dilute isotropic phase consisting of well dissolved segments. The origin of this aggregation is relevant to the connectivity and amphiphicility of the hairy-rod segments and this process could prevail among semirigid polymers with the disklike domains serving as the nuclei for the development of macroscopic nematic phase as one increases the polymer concentration.

Journal Article↗

Comparative studies on the micellization of sodium bis(4-phenylbutyl) sulfosuccinate and sodium bis(2-ethylhexyl) sulfosuccinate and their interaction with hydrophobically modified poly(acrylamide).

The micellization process of sodium bis(4-phenylbutyl) sulfosuccinate (SBPBS) has been studied compared to that of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) by surface tension, steady-state fluorescence, microcalorimetry, dynamic light scattering (DLS), and transmission electron microscopy (TEM) measurements. Meanwhile, the interaction of these two surfactants with hydrophobically modified poly(acrylamide) (HMPAM) was investigated. The results show that the surface tension at the critical micelle concentration (cmc) of SBPBS and the micropolarity probed by pyrene in SBPBS aggregates are both larger than those of AOT. The enthalpy change of micellization (DeltaH(mic)) of AOT is endothermic, while it is exothermic for SBPBS. Strong pi-pi interaction among the adjacent phenyl groups of SBPBS molecules is likely the cause for the above properties of SBPBS. Moreover, vesicles are observed for AOT and SBPBS by DLS and TEM, especially for AOT, whose micelle-vesicle transition has been first confirmed by its calorimetric curve. In the surfactant-HMPAM systems, the critical aggregation concentration (cac), the saturation concentration of aggregation (C(2)), and the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SBPBS onto HMPAM is stronger than that of AOT.

Journal Article↗

Light-scattering study of the aggregation of syndiotactic poly(methyl methacrylate) in solution.

Syndiotactic poly(methyl methacrylate (s-PMMA) may undergo aggregation in n-butyl chloride (n-BuCl) at temperatures below the theta temperature. The aggregation behavior of the s-PMMA with weight-average molecular weight M(w) =6.06 x 10(5) g mol(-1) was studied by a combination of static and dynamic laser-light-scattering experiments. A solution of concentration 1.12 x 10(-4) g mL(-1) was quenched from 50 degrees C (above the theta temperature in n-BuCl, 35 degrees C to 12 degrees C, and the aggregation process was measured over 60 h. The time dependence of M(w) the root-mean-square z-average radius of gyration < R(g) >, and the average hydrodynamic radius were used to monitor the growth of the aggregates, with the result M(w) approximately < R(g) > d(f) (where d(f) = 1.98 +/- 0.02), which implies the formation of a fractal aggregate. The observed fractal dimension, d(f), is close to that expected for a reaction-limited cluster aggregation for which d(f) = 2.1. In addition, atomic force microscopy was used to image the aggregates.

Light↗

Organic/inorganic hybrid vesicles based on a reactive block copolymer.

Presented in this communication is a novel hybrid vesicle with a cross-linked polyorganosiloxane wall based on a new reactive block copolymer, poly(ethylene oxide)-block-poly(3-(trimethoxysilyl)propyl methacrylate) (PEO-b-PTMSPMA), which was synthesized by atom transfer radical polymerization. The vesicles were prepared first by self-assembly of the block copolymer in a selective solvent, and then the PTMSPMA block was subjected to hydrolysis and polycondensation reaction to fix vesicle wall in the presence of triethylamine as a catalyst. Transmission electron microscopy, scanning electron microscopy, NMR, and light scattering have been used to characterize the vesicles.

Journal Article↗

Supramolecular assembly of poly(phenylene vinylene) with crown ether substituents to form nanoribbons.

Poly(para-phenylene vinylene) with crown ether substituents (C-PPV) could form nanoribbons through supramolecular assembly with K(+) in dilute chloroform solution. The length of the nanoribbons increased with an increase in the standing time of the C-PPV/K(+) solution. Experimental evidence to support the interaction between K(+) and crown ether substituents was provided, and the growth mechanism of C-PPV/K(+) nanorods to nanoribbons was proposed. The influence of the length of the nanoribbons on the photophysics of C-PPV was also investigated.

Journal Article↗