PubMed Health⌕ Search

Biomedical subjects

Charles W Patrick

Publications and source records attributed to Charles W Patrick.

12 recordsLinked to original sources

Photocrosslinked hyaluronic acid hydrogels: natural, biodegradable tissue engineering scaffolds.

Ideally, rationally designed tissue engineering scaffolds promote natural wound healing and regeneration. Therefore, we sought to synthesize a biomimetic hydrogel specifically designed to promote tissue repair and chose hyaluronic acid (HA; also called hyaluronan) as our initial material. Hyaluronic acid is a naturally occurring polymer associated with various cellular processes involved in wound healing, such as angiogenesis. Hyaluronic acid also presents unique advantages: it is easy to produce and modify, hydrophilic and nonadhesive, and naturally biodegradable. We prepared a range of glycidyl methacrylate-HA (GMHA) conjugates, which were subsequently photopolymerized to form crosslinked GMHA hydrogels. A range of hydrogel degradation rates was achieved as well as a corresponding, modest range of material properties (e.g., swelling, mesh size). Increased amounts of conjugated methacrylate groups corresponded with increased crosslink densities and decreased degradation rates and yet had an insignificant effect on human aortic endothelial cell cytocompatibility and proliferation. Rat subcutaneous implants of the GMHA hydrogels showed good biocompatibility, little inflammatory response, and similar levels of vascularization at the implant edge compared with those of fibrin positive controls. Therefore, these novel GMHA hydrogels are suitable for modification with adhesive peptide sequences (e.g., RGD) and use in a variety of wound-healing applications.

Absorbable Implants↗

Effects of cryogen spray cooling and high radiant exposures on selective vascular injury during laser irradiation of human skin.

BACKGROUND: Increasing radiant exposure offers a means to increase treatment efficacy during laser-mediated treatment of vascular lesions, such as port-wine stains; however, excessive radiant exposure decreases selective vascular injury due to increased heat generation within the epidermis and collateral damage to perivascular collagen. OBJECTIVE: To determine if cryogen spray cooling could be used to maintain selective vascular injury (ie, prevent epidermal and perivascular collagen damage) when using high radiant exposures (16-30 J/cm2). DESIGN: Observational study. SETTING: Academic hospital and research laboratory. PATIENTS: Twenty women with normal abdominal skin (skin phototypes I-VI). INTERVENTIONS: Skin was irradiated with a pulsed dye laser (wavelength = 585 nm; pulse duration = 1.5 milliseconds; 5-mm-diameter spot) using various radiant exposures (8-30 J/cm2) without and with cryogen spray cooling (50- to 300-millisecond cryogen spurts). MAIN OUTCOME MEASURE: Hematoxylin-eosin-stained histologic sections from each irradiated site were examined for the degree of epidermal damage, maximum depth of red blood cell coagulation, and percentage of vessels containing perivascular collagen coagulation. RESULTS: Long cryogen spurt durations (>200 milliseconds) protected the epidermis in light-skinned individuals (skin phototypes I-IV) at the highest radiant exposure (30 J/cm2); however, epidermal protection could not be achieved in dark-skinned individuals (skin phototypes V-VI) even at the lowest radiant exposure (8 J/cm2). The red blood cell coagulation depth increased with increasing radiant exposure (to >2.5 mm for skin phototypes I-IV and to approximately 1.2 mm for skin phototypes V-VI). In addition, long cryogen spurt durations (>200 milliseconds) prevented perivascular collagen coagulation in all skin types. CONCLUSIONS: Cryogen spurt durations much longer than those currently used in therapy (>200 milliseconds) may be clinically useful for protecting the epidermis and perivascular tissues when using high radiant exposures during cutaneous laser therapies. Additional studies are necessary to prove clinical safety of these protocols.

Adult↗

Tissue engineering.

Tissue engineering will potentially change the practice of plastic surgery more than any other clinical specialty. It is an interdisciplinary field that promises new methods of tissue repair. There has been more than $3.5 billion invested in this field since 1990. Relevant areas of progress include advanced computing, biomaterials, cell technology, growth factor fabrication and delivery, and gene manipulation. Beneficial clinical techniques will emerge from continued investigation in each of these areas. Techniques that are developed must be scaled up to industry with products cleared by regulatory agencies and acceptable to clinicians and patients. A goal of tissue engineering is to change clinical practice, yielding improved patient outcomes and lower costs of care.

Biocompatible Materials↗

The accuracy of stereolithography in planning craniofacial bone replacement.

Stereolithography can be used to produce physical models of the craniofacial skeleton from three-dimensional computed tomography (CT) data. The purpose of this study was to assess its accuracy for modeling osseous defects of the midface. Maxillary resections simulating unilateral maxillectomy (N = 3), bilateral maxillectomy (N = 3), and unilateral orbitomaxillectomy (N = 3) were performed as for sinus tumor resection on nine fresh cadaver skulls. Stereolithographic models (SLMs) were made from the specimen's CT data. The accuracy of SLMs was determined by comparing distances between key landmarks on the skulls and SLMs. Each SLM was grossly accurate with some loss of thin delicate structures. The mean differences in overall dimensions between the SLMs and skull specimens were 1.5 mm (range: 0-5.5 mm) for craniofacial measures, 1.2 mm (range: 0-4.8 mm) for skull base measures, 1.6 (range: 0-5.8 mm) for midface measures, 1.9 mm (range: 0-7.9 mm) for maxilla measures, and 1.5 mm (range: 0-5.7 mm) for orbital measures. The mean differences in defect dimensions were 1.9 mm (range: 0.1-5.7 mm) for unilateral maxillectomy, 0.8 mm (range: 0.2-1.5 mm) for bilateral maxillectomy, and 2.5 mm (range: 0.2-7.0 mm) for orbitomaxillectomy defects. Midface SLMs may be more prone to error than those of other craniofacial regions because of the presence of thin walls and small projections. Thus, one should consider designing midface bone replacements that are larger in critical dimensions than those predicted by preoperative modeling. These findings have important implications for the planning of current surgical methods as well as future applications of tissue-engineered bone replacement.

Cadaver↗

Integrin-mediated preadipocyte adhesion and migration on laminin-1.

Cell adhesion and migration are key events in many biological processes and depend on extracellular matrix proteins. Understanding these cellular events in adipogenesis is paramount to elucidating the biological mechanisms underlying preadipocyte-specific aspects of obesity, diabetes, and adipose tissue development for the design of pharmaceutical screening and tissue engineering strategies. We quantitatively investigated preadipocyte adhesion and migration on laminin-1 surfaces and identified candidate cognate preadipocyte receptors for laminin-1. In adhesion studies, we found that preadipocytes readily adhered to laminin-1 as compared with other extracellular matrix proteins. In addition, immunocytochemical analysis demonstrated that an array of integrin molecules was present on the surface of preadipocytes. Preadipocyte adhesion on laminin-1 was quantitatively assessed using a sedimentation adhesion assay, and results suggested that preadipocyte adhesion to laminin-1 was mediated by the alpha1beta1 integrin. In addition, digital time-lapse microscopy and quantitative cell tracking revealed that inhibition of the alpha1beta1 integrin resulted in abrogation of preadipocyte migration on laminin-1 surfaces. These results strongly support the hypothesis that preadipocyte adhesion to and migration on laminin-1 substrata are regulated, in part, by integrins.

Adipocytes↗

Automated selection of DAB-labeled tissue for immunohistochemical quantification.

The increased use of immunohistochemistry (IHC) in both clinical and basic research settings has led to the development of techniques for acquiring quantitative information from immunostains. Staining correlates with absolute protein levels and has been investigated as a clinical tool for patient diagnosis and prognosis. For these reasons, automated imaging methods have been developed in an attempt to standardize IHC analysis. We propose a novel imaging technique in which brightfield images of diaminobenzidene (DAB)-labeled antigens are converted to normalized blue images, allowing automated identification of positively stained tissue. A statistical analysis compared our method with seven previously published imaging techniques by measuring each one's agreement with manual analysis by two observers. Eighteen DAB-stained images showing a range of protein levels were used. Accuracy was assessed by calculating the percentage of pixels misclassified using each technique compared with a manual standard. Bland-Altman analysis was then used to show the extent to which misclassification affected staining quantification. Many of the techniques were inconsistent in classifying DAB staining due to background interference, but our method was statistically the most accurate and consistent across all staining levels.

Animals↗

Radiotherapy: effects on expanded skin.

Although the combination of radiation and tissue expansion has been associated with a significant rate of complications, the specific pathophysiology has yet to be clearly elucidated. The objective of this study was to develop a model to identify and examine specific histologic changes associated with tissue expansion and irradiation. Rectangular 50-cc silicone tissue expanders were placed subcutaneously over the midline dorsum of 18 adult New Zealand white rabbits. Preoperative radiographic dosimetry demonstrated that the radiation portal was away from vital intraabdominal structures. The expanders were inflated with 10 cc of saline every other day for a total of 80 cc. Expanders were left in place for 2 to 3 weeks to allow fibrovascular capsule formation. The rabbits were then divided into three groups (six rabbits per group), each receiving one of three nonfractionated doses of radiation (20, 25, or 35 Gy). Half of the expanded skin was irradiated using a single dose, and the other half served as a nonirradiated control. Capsules and skin were harvested 6 weeks after the delivery of radiation, allowing the beginning of chronic radiation changes to occur. Using hematoxylin and eosin staining, histomorphometric analysis was performed. The data were analyzed using Student's test. Although irradiation did not affect dermal thickness, it did cause a statistically significant increase in epidermal thickness. At 20, 25, and 35 Gy the increase in epidermal thickness was 43, 90, and 130 percent, respectively. Although significant epidermal changes could be identified, capsular and dermal alterations were not evident. Further studies evaluating the long-term effects of alterations in capsular formation caused by radiation may be required.

Animals↗

Three-dimensional ultrastructural analysis of RNA distribution within germinal granules of Xenopus.

The germ plasm is a specialized region of oocyte cytoplasm that contains determinants of germ cell fate. In Xenopus oocytes, the germ plasm is a part of the METRO region of mitochondrial cloud. It contains the germinal granules and a variety of coding and noncoding RNAs that include Xcat2, Xlsirts, Xdazl, DEADSouth, Xpat, Xwnt11, fatVg, B7/Fingers, C10/XFACS, and mitochondrial large and small rRNA. We analyzed the distribution of these 11 different RNAs within the various compartments of germ plasm during Xenopus oogenesis and development by using whole-mount electron microscopy in situ hybridization. Serial EM sections were used to reconstruct a three-dimensional image of germinal granule distribution within the METRO region of the cloud and the distribution of RNAs on the granules in oocytes and embryos. We found that, in the oocytes, the majority of RNAs were associated either with the precursor of germinal granules or with the germ plasm matrix. Only Xcat2, Xpat, and DEADSouth RNAs were associated with the mature germinal granules in oocytes, while only Xcat2 and Xpat were associated with germinal granules in embryos. However, Xcat2 was the only RNA that was consistently sequestered inside the germinal granules, while the others were located on the periphery. Xdazl, which functions in germ cell migration/formation, was detected on the matrix between granules. Later in development, Xcat2 mRNA was released from the germinal granules. This coincides with the timing of its translational derepression. These results demonstrate that there is a dynamic three-dimensional architecture to the germinal granules that changes during oogenesis and development. They also indicate that association of specific RNAs with the germinal granules is not a prerequisite for their serving a germ cell function; however, it may be related to their state of translational repression.

Animals↗

A technique for quantitative three-dimensional analysis of microvascular structure.

Research into angiogenesis and vascular microarchitecture has contributed to progress in a wide variety of biomedical fields, but increased understanding is limited, in part, by the available assays and imaging modalities. Techniques that allow quantitation of vascular microarchitecture are needed. A comprehensive method is presented that uses 6-microm-thick serial sections of frozen tissue samples, immunostaining for CD31, brightfield microscopy, automated alignment of two-dimensional serial sections, and volume rendering to produce high-resolution, three-dimensional, quantifiable images of microvascular structure. Application of the technique is shown by characterizing vascularization into a fibrin gel implanted against the skeletal muscle of rats and explanted after 7 days. Comparing measurements from automated and manually aligned MRI and fibrin samples verified quantitation. Automation removes concerns of observer bias or variation inherent in manual alignment and increases the speed of analysis. Analysis of the fibrin gel reveals a dense (4.3 +/- 1.1% endothelial cell density) network of tortuous (1.37 +/- 0.05 tortuosity) capillaries that replaces the gel as it degrades. There is a high level of void space (22.8 +/- 3.6%) in the gel, and average capillary length in the fibrovascular tissue was 93.0 +/- 7.4 microm. Data obtained from these automatically aligned images agreed with those obtained using manual analysis (no statistical difference), and the results are consistent with data from traditional methods.

Animals↗

Bioactive poly(L-lactic acid) conduits seeded with Schwann cells for peripheral nerve regeneration.

This study attempted to enhance the efficacy of peripheral nerve regeneration using our previously tested poly(L-lactic acid) (PLLA) conduits by incorporating them with allogeneic Schwann cells (SCs). The SCs were harvested, cultured to obtain confluent monolayers and two concentrations (1 x 10(4) and 1 x 10(6) SC/ml) were combined with a collagen matrix (Vitrogen) and injected into the PLLA conduits. The conduits were then implanted into a 12 mm right sciatic nerve defect in rats. Three control groups were used: isografts, PLLA conduits filled with collagen alone and empty silicone tubes. The sciatic functional index (SFI) was calculated monthly through four months. At the end of second and fourth months, the gastrocnemius muscle was harvested and weighed for comparison and the graft conduit and distal nerve were harvested for histomorphologic analysis. The mean SFI demonstrated no group differences from isograft control. By four months, there was no significant difference in gastrocnemius muscle weight between the experimental groups compared to isograft controls. At four months, the distal nerve demonstrated a statistically lower number of axons mm2 for the high and low SC density groups and collagen control. The nerve fiber density was significantly lower in all of the groups compared to isograft controls by four months. The development of a "bioactive" nerve conduit using tissue engineering to replace autogenous nerve grafts offers a potential approach to improved patient care. Although equivalent nerve regeneration to autografts was not achieved, this study provides promising results for further investigation.

Animals↗

Isolation and culture of rat microvascular endothelial cells.

The purpose of this study is to identify the separation techniques that result in pure cultures of rat microvascular endothelial cells (MECs). A multistep process is used to optimize the separation of the cells from rat epididymal fat pads, obtaining as pure a culture as possible within a relatively short processing time. The process initially employs the digestion, filtration, and density gradient separation steps. We further describe the use of an attachment phase that allows the differential adherence of contaminating cell types. Immunomagnetic purification is the final step in the process and is performed using anti-PECAM-1 (CD31) monoclonal antibody-labeled DynaBeads.

Adipose Tissue↗

Quantification of vascular density using a semiautomated technique for immunostained specimens.

OBJECTIVE: To develop a semiautomated, quantitative techniquefor the assessment of vascular density in immunohistochemically stained tissue sections using diaminobenzidine tetrahydrochloride (DAB) and hematoxylin as chromagens. STUDY DESIGN: A semiautomated thresholding technique was developed to quantitate vascular density in tissue sections stained with anti-CD31 (1 degrees antibody). The immunohistochemically stained specimens were digitally imaged using a 24-bit color camera. The blue component of the RGB image was segmented using a variable high-pass filter. After thresholding, the segmented areas (CD31 positive) were quantified and vascular density determined. The validity of the method was verified by calculating the precision of the technique using the coefficient of repeatability and by quantifying its agreement with manual analysis according to the Bland-Altman approach. RESULTS: Vascular endothelial cells were specifically selected using anti-CD31 as the primary antibody and the appropriate horseradish peroxidase-conjugated secondary antibody. Utilizing the semiautomated thresholding technique, the separation of DAB-stained tissuefrom non-DAB-stained tissue was achieved. The method developed possesses a low coefficient of repeatability (0.49%), agrees well with manual assessment (mean difference = -0.29 +/- 0.92%), is highly automated and is user friendly. CONCLUSION: A novel semiautomated technique for the quantification of vascular density was developed. This technique provides a method for reproducible measurement of immunostaining procedures (immunohistochemistry, immunocytochemistry and in situ hybridization) utilizing immunoperoxidase techniques with DAB as a chromagen.

3,3'-Diaminobenzidine↗