Biomedical subjects

Cheng-Dah Chen

Publications and source records attributed to Cheng-Dah Chen.

3 recordsLinked to original sources

PubMed2006

Sensing capability of the localized surface plasmon resonance of gold nanorods.

We demonstrate the feasibility of using the longitudinal component of gold nanorod's surface plasmon resonance in biomolecular sensing. The sensitive dependence of the absorption maximum on the dielectric constant of the particle interfacial region makes gold nanorods a promise for constructing a biomolecular sensing scheme. The sensor containing gold nanorods, with a mean aspect ratio of 5.2, exhibits a sensitivity of ca. 366 nm/RIU (refractive index unit), which increases accordingly with the increase of the particle mean aspect ratios. Such a biosensor was further modified to demonstrate its effectiveness in quantitative detection for selective binding events, such as biotin/streptavidin pairs, through a process in which biotin molecules were chemically attached to the gold nanorods' surface prior to detection measurements. Results showed that the spectral lambda(max) shifts linearly to the concentrations of the streptavidin. The results from both experiment and model calculations strongly indicate the efficacy of the longitudinal surface plasmon absorption band in biosensing.

Biopolymers↗

PubMed2005

Photoacoustic flow measurements by use of laser-induced shape transitions of gold nanorods.

A quantitative technique for flow measurements based on a wash-in analysis is proposed. The technique makes use of the shape dependence of the optical absorption of gold nanorods and the transitions in their shape induced by pulsed laser irradiation. The photon-induced shape transition of gold nanorods involves mainly a rod-to-sphere conversion and a shift in the peak optical absorption wavelength. The application of a series of laser pulses will induce shape changes in gold nanorods as they flow through a region of interest, with quantitative flow information being derived from the photoacoustic signals from the irradiated gold nanorods measured as a function of time. To demonstrate the feasibility of the technique, a Nd:YAG laser operating at 1064 nm was used for irradiation and a 1 MHz ultrasonic transducer was used for acoustic detection. The flow velocity ranged from 0.35 to 2.83 mm/s. Excellent agreement between the measured velocities and the actual velocities was demonstrated, with a linear regression correlation coefficient of 0.93. This study is a pioneer work on wash-in flow estimation in photoacoustic imaging.

Acoustics↗

PubMed2005

Highly efficient, wavelength-tunable, gold nanoparticle based optothermal nanoconvertors.

A photon-to-thermal energy conversion nanosystem based the near-infrared irradiation of one-dimensional gold nanoparticles (nanorods) is highly efficient and tunable to the incident wavelength. Using ambient photothermal detection, we observed a temperature rise of ca. 30 degrees C upon irradiating an aliquot of an aqueous nanoparticle suspension with a laser for 5 s. The temperature can be elevated even higher by embedding the particles into a poorly thermally conducting solid medium. The illuminated area of a sample containing nanorod particles embedded in a polyurethane matrix can be heated to >100 degrees C upon irradiation for 1 min. This optothermal conversion efficiency can be turned on selectively by tuning the wavelength to match that of the surface plasmon resonance of the particles. This specificity, with respect to the wavelength of the incident light, makes these highly efficient, particle-based, optothermal nanoconvertors suitable for potential use in multicolor detection on biochips and related sensors and as ideal contrasting agents for optoacoustic biomedical imaging applications.

Journal Article↗