Biomedical subjects

Cheol-Hee Ahn

Publications and source records attributed to Cheol-Hee Ahn.

8 recordsLinked to original sources

PubMed2007

In vivo tumor targeting and radionuclide imaging with self-assembled nanoparticles: mechanisms, key factors, and their implications.

The development of more selective delivery systems for cancer diagnosis and chemotherapy is one of the most important goals of current anticancer research. The purpose of this study is to evaluate various self-assembled nanoparticles as candidates to shuttle radionuclide and/or drugs into tumors and to investigate the mechanisms underlying the tumor targeting with self-assembled nanoparticles. By combining different hydrophobic moieties and hydrophilic polymer backbones, various self-assembled nanoparticles were prepared, and their in vivo distributions in tumor-bearing mice were studied by radionuclide imaging. One type of nanoparticles (fluorescein isothiocyanate-conjugated glycol chitosan (FGC) nanoparticles) exhibited highly selective tumoral localization. Scintigraphic images obtained 1 day after the intravenous injection of FGC nanoparticles clearly delineated the tumor against adjacent tissues. The mechanisms underlying the tumor targeting with self-assembled nanoparticles were investigated in terms of the physicochemical properties of nanoparticles and tumor microenvironments. FGC nanoparticles were preferentially localized in perivascular regions, implying their extravasation to tumors through the hyperpermeable tumor vasculature. The magnitude and pattern of tumoral distribution of self-assembled nanoparticles were influenced by several key factors--(i) in vivo colloidal stability: nanoparticles should maintain their intact nanostructures in vivo for a long period of time, (ii) particle size, (iii) intracellular uptake of nanoparticle: fast cellular uptake greatly facilitates the tumor targeting, (iv) tumor angiogenesis: pathological angiogenesis permits access of nanoparticles to tumors. We believe that this work can provide insight for the engineering of nanoparticles and be extended to cancer therapy and diagnosis, so as to deliver multiple therapeutic agents and imaging probes at high local concentrations.

Animals↗

PubMed2006

A hypoxia-inducible gene expression system using erythropoietin 3' untranslated region for the gene therapy of rat spinal cord injury.

Many neurologic disorders are accompanied by ischemic injury during the pathologic process. To develop a controllable and injury-specific gene therapy system for the neurologic disorders, we constructed a hypoxia inducible plasmid with the erythropoietin (Epo) 3' untranslated region (UTR), which can enhance the stability of target mRNAs in response to hypoxia. The Epo 3' UTR was inserted at the 3' flanking region of luciferase gene in pSV-Luc, resulting in the construction of pSV-Luc-EpoUTR. In pEpo-SV-Luc-EpoUTR, the Epo enhancer was inserted into the upstream of the SV40 promoter to increase the hypoxia inducibility. The plasmids were evaluated in N2a mouse neuroblastoma cells under hypoxic conditions and in a rat spinal cord injury (SCI) model. The results showed that the Epo 3' UTR alone showed a three-fold increase in luciferase activity in hypoxic N2a cells as well as in the rat SCI model when compared to the sham control. In contrast, the Epo 3' UTR showed no effect on the luciferase activity in the presence of the Epo enhancer, probably because the Epo enhancer was more sensitive to hypoxia and showed a dominant effect. However, the Epo enhancer itself showed high level of luciferase activity even in normoxia (about five to eight-folds increase), while the Epo 3' UTR did not show enhanced background activity. Immunohistochemical staining showed expression of luciferase from pSV-Luc-EpoUTR both in neurons and astrocytes around the injured spinal cord of rat. These results suggest that the Epo 3' UTR could provide a specific and safe system for the hypoxia-inducible gene therapy of the neurologic disorders including SCI.

3' Untranslated Regions↗

PubMed2006

An efficient GLP-1 expression system using two-step transcription amplification.

Glucagon-like peptide 1 (GLP-1) is an insulinotropic protein. It was reported that the continuous infusion of GLP-1 normalized the blood glucose level in type 2 diabetes animal model. However, the short half-life of GLP-1 has limited its application in clinical settings and prompted us to develop a GLP-1 gene therapy system. Our previous results showed that the delivery of pbeta-GLP-1 using polyethylenimine (PEI) reduced the blood glucose level effectively. However, the glucose level was not completely normalized. In the present study, the more efficient GLP-1 expression system was developed using two-step transcription amplification (TSTA). To evaluate the TSTA system, pbeta-Gal4-p65 and pUAS-Luc were constructed. The pUAS-Luc/pbeta-Gal4-p65 system showed the highest transfection efficiency at a 2:1 pUAS-Luc/pbeta-Gal4-p65 weight ratio. In addition, the transgene expression by the TSTA system was at least 4 times higher than pbeta-Luc. To apply the TSTA system to the GLP-1 expression plasmid, pUAS-GLP-1 was constructed. The pUAS-GLP-1/pbeta-Gal4-p65 system showed higher mRNA level than pbeta-GLP-1. In addition, the level of GLP-1 by the pUAS-GLP-1/pbeta-Gal4-p65 system was more than 4 times higher than pbeta-GLP-1. Therefore, the TSTA GLP-1 expression system may be useful to develop gene therapy system for type 2 diabetes.

Cell Line↗

PubMed2005

Amphiphilic amino acid copolymers as stabilizers for the preparation of nanocrystal dispersion.

The recent advance of particle size engineering in nanometer ranges has widened the formulation opportunities of relatively water-insoluble drugs. However, the 'nanoformulation' suffers from a lack of systematic understanding about the requirements of polymeric stabilizers. Furthermore, the polymers that can be used for the preparation of nanocrystals are so limited that finding a proper stabilizer for a given formulation is often difficult. In this study, amino acid copolymers whose properties can systematically be tailored are developed, and their morphological and compositional effects are investigated. Copolymers containing lysine (K) as their hydrophilic segments, and phenylalanine (F) or leucine (L) as their hydrophobic segments successfully produce stable nanocrystals (200-300 nm) in water, while copolymers of K and alanine (A) could not generate nanosized particles. Not the morphology but the hydrophobicity of copolymers seems to be a critical parameter in the preparation of drug nanocrystals by wet comminution. The effective stabilization performance of copolymers requires the hydrophobic moiety content to be higher than 15 mol%. Comminution for only 5 min is long enough for nanocrystal preparation, and the crystallinity of drug is found intact after the processing.

Amino Acids↗

PubMed2004

Micellization behavior of star-block copolymers in a selective solvent: A Brownian dynamics simulation approach.

Micellization behavior of (AB)n type star-block copolymer in a selective solvent for its outer block is investigated by using a Brownian dynamics simulation. Micellar properties are compared in terms of the arm number (n) of star-block copolymer. It is observed that the critical micelle concentration (cmc) shows a minimum when the cmc is plotted against the arm number. The star-block copolymer with longer soluble block shows the cmc minimum at smaller arm number than that with shorter soluble block. Although the star-block copolymer with multiple arms forms more compact core as compared to diblock copolymer, the average aggregation number is inversely proportional to the arm number (approximately 1/n), which implies that the micelle size is invariant with the arm number. Theoretical predictions based on a simple mean field theory agree qualitatively well with the simulation results.

Journal Article↗

PubMed2004

Synthesis of biodegradable multi-block copolymers of poly(L-lysine) and poly(ethylene glycol) as a non-viral gene carrier.

Biodegradable and non-toxic multi-block copolymers based on poly(L-lysine) and poly(ethylene glycol) were synthesized. Synthesized copolymers showed almost negligible cytotoxicity above 95% cell viability and transfection efficiency compared to the PLL homopolymer with molecular weight of 25,700. Biodegradation under physiological conditions revealed that the molecular weight of copolymers decreased to 20% of the initial molecular weight within 72 h. Transfection efficiencies of copolymers were not affected by the presence of serum, while that of PLL homopolymer decreased to the level of naked DNA in the presence of serum. Based on the results, the new copolymers are believed to be a potentially efficient carrier for the delivery of bioactive agents.

Cell Line, Transformed↗

PubMed2002

Biodegradable poly(ethylenimine) for plasmid DNA delivery.

Poly(ethylenimine) (PEI) has been known as an efficient gene carrier with the highest cationic charge potential. High transfection efficiency of PEI, along with its cytotoxicity, strongly depends on the molecular weight. Synthesis of cationic copolymers derived from the low molecular weight of PEI and hydrophilic poly(ethylene glycol) (PEG), which are water soluble and degradable under physiological conditions, was investigated for plasmid delivery. Hydrophilic PEG is expected to reduce the toxicity of the copolymer, improve the poor solubility of the PEI and DNA complexes, and help to introduce degradable bonds by reaction with the primary amines in the PEI. Considering the dependence of transfection efficiency and cytotoxicity on the molecular weight of the PEI, high transfection efficiency is expected from an increased molecular weight of the copolymer and low cytotoxicity from the introduction of PEG and the degradation of the copolymer into low molecular weight PEIs. Reaction conditions were carefully controlled to produce water soluble copolymers. Results from a gel retardation assay and zetapotentiometer indicated that complete neutralization of the complexes was achieved at the charge ratios of copolymer/pSV-beta-gal plasmid from 0.8 to 1.0 with the mean particle size of the polyplexes ranging from 129.8+/-0.9 to 151.8+/-3.4 nm. In vitro transfection efficiency of the synthesized copolymer increased up to three times higher than that of starting low molecular weight PEI, while the cell viability was maintained over 80%.

Cell Line↗

PubMed2002

Artery wall binding peptide-poly(ethylene glycol)-grafted-poly(L-lysine)-based gene delivery to artery wall cells.

Artery wall binding peptide (AWBP; Cys-Gly-Arg-Ala-Leu-Val-Asp-Thr-Leu-Lys-Phe-Val-Thr-Gln-Ala-Glu-Gly-Ala-Lys), a specific targeting peptide, was conjugated to poly(ethylene glycol)-grafted-poly(L-lysine) (PEG-g-PLL) to enhance the gene transfer to artery wall cells. AWBP-PEG-PLL was synthesized by the reaction between the vinylsulfone group of PEG-g-PLL and the thiol group of cysteine in AWBP. 1H-NMR analysis confirmed the composition of the obtained polymer and indicated that four mol of AWBP were reacted to one mole of VS-PEG-PLL. The particles of AWBP-PEG-PLL/pDNA complexes were determined spherical with a size of approximately 100 nm by dynamic light scattering (DLS) and atomic force microscopy (AFM). Agarose gel retardation assay indicated that AWBP-PEG-PLL was able to condense plasmid DNA and reach complete complexation at and above a charge ratio 1/1 (+/-). Transfection efficiency of AWBP-PEG-PLL/pDNA complexes was 150-180 times higher than that of control systems, such as PEG-g-PLL/pDNA and PLL/pDNA, in both bovine aorta endothelial cells and smooth muscle cells. Luciferase activities of AWBP-PEG-PLL depended on the amount of free AWBP, while those of the control carriers such as PLL and PEG-g-PLL were not affected by free AWBP. These results supported that gene transfer of AWBP-PEG-PLL/pDNA complexes to bovine aorta wall cells was mediated by specific artery wall cell receptor-mediated endocytosis.

Amino Acid Sequence↗