Biomedical subjects

Chien-Ching Ma

Publications and source records attributed to Chien-Ching Ma.

7 recordsLinked to original sources

PubMed2006

The influence of electrode designs on the resonant vibrations for square piezoceramic plates.

In this paper, the resonant vibrations of square piezoceramic plates with four different electrode designs are investigated. Two experimental techniques, the amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and the impedance analysis, are used to access the influence of the electrode arrangement on the resonant characteristics of square piezoceramic plates. Both the out-of-plane and in-plane resonant frequencies and full-field mode shapes of piezoceramic plates with various electrode designs are obtained from the AF-ESPI method. The impedance analyzer is used to measure the resonant and antiresonant frequencies of piezoceramic plates. The dynamic electromechanical coupling coefficient (EMCC), which relates to the ability of conversion between mechanical and electrical energy, is determined from the measured values of resonant and antiresonant frequencies. Experimental results of the resonant vibration characteristics of the square piezoceramic plates are verified by numerical computations based on the finite-element method. Excellent agreement between the experimental and numerical results is found in resonant frequencies and corresponding mode shapes. It is found that the electrode design has important influence on the resonant characteristics of piezoceramic plates. The effect of different designs of electrode is more significant in the in-plane modes than that in the out-of-plane modes.

Journal Article↗

PubMed2005

Theoretical, numerical, and experimental investigation on resonant vibrations of piezoceramic annular disks.

In this study, vibration characteristics of thin piezoceramic annular disks with stress-free boundary conditions are investigated by theoretical analysis, numerical simulation, and experimental measurement. The nonaxisymmetric, out-of-plane (transverse), and axisymmetric in-plane (tangential and radial extensional) vibration modes are discussed in detail in terms of resonant frequencies, mode shapes, and electrical currents. Two optical techniques, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV), as well as the electrical impedance measurement are used to validate the analytical results. Both theoretical and experimental results indicate that the transverse and tangential vibration modes cannot be determined by the impedance analysis; hence, only resonant frequencies of extensional vibration modes are presented from the impedance analyzer. The LDV system is used to measure the resonant frequencies of transverse vibrations. However, both the transverse and extensional vibration modes and resonant frequencies of piezoceramic annular disks are obtained by the AF-ESPI method, and the interferometric fringes are produced instantly by a video recording system. Numerical results obtained by finite-element calculations are compared with those from theoretical analysis and experimental measurements. It is shown that the theoretical predictions of resonant frequencies and the corresponding mode shapes agree well with the experimental results. Good agreement between the predicted and measured electrical impedance also is found. The dependence of resonant frequencies and dynamic electromechanical coupling coefficients on the inner-to-outer radius ratio also is analyzed and discussed in this study.

Journal Article↗

PubMed2004

Theoretical analysis and experimental measurement for resonant vibration of piezoceramic circular plates.

Based on the electroelastic theory for piezoelectric plates, the vibration characteristics of piezoceramic disks with free-boundary conditions are investigated in this work by theoretical analysis, numerical simulation, and experimental measurement. The resonance of thin piezoceramic disks is classified into three types of vibration modes: transverse, tangential, and radial extensional modes. All of these modes are investigated in detail. Two optical techniques, amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV), are used to validate the theoretical analysis. Because the clear fringe patterns are shown only at resonant frequencies, both the resonant frequencies and the corresponding mode shapes are obtained experimentally at the same time by the proposed AF-ESPI method. Good quality of the interferometric fringe patterns for both the transverse and extensional vibration mode shapes are demonstrated. The resonant frequencies of the piezoceramic disk also are measured by the conventional impedance analysis. Both theoretical and experimental results indicate that the transverse and tangential vibration modes cannot be measured by the impedance analysis, and only the resonant frequencies of extensional vibration modes can be obtained. Numerical calculations based on the finite element method also are performed, and the results are compared with the theoretical analysis and experimental measurements. It is shown that the finite element method (FEM) calculations and the experimental results agree fairly well for the resonant frequencies and mode shapes. The resonant frequencies and mode shapes predicted by theoretical analysis and calculated by finite element method are in good agreement, and the difference of resonant frequencies for both results with the thickness-to-diameter (h/D) ratios, ranging from 0.01 to 0.1, are presented.

Journal Article↗

PubMed2004

Experimental measurement and numerical analysis on resonant characteristics of piezoelectric disks with partial electrode designs.

Three experimental techniques are used in this study to access the influence of the electrode arrangement on the resonant characteristics of piezoceramic disks. These methods, including the amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI), laser Doppler vibrometer-dynamic signal analyzer (LDV-DSA), and impedance analysis, are based on the measurement of full-field displacement, pointwise displacement, and electric impedance, respectively. In this study, one full electrode design and three nonsymmetrical partial electrode designs of piezoelectric disks are investigated. Because the clear fringe patterns measured by the AF-ESPI method will be shown only at resonant frequencies, both the resonant frequencies and the corresponding vibration mode shapes are successfully obtained at the same time for out-of-plane and in-plane motions. The second experimental method is the impedance analysis, which is used to measure the resonant and antiresonant frequencies. In addition to these experimental methods, LDV-DSA is used to determine the resonant frequencies of the vibration mode with out-of-plane motion. From the experimental results, the dependence of electrode design on the vibration frequencies and mode shapes is addressed. Numerical computations based on the finite element method are presented, and the results are compared with the experimental measurements. The effect of different designs of electrode is more significant in the in-plane modes than that in the out-of-plane modes.

Journal Article↗

PubMed2003

Vibration analysis of angle-ply laminated composite plates with an embedded piezoceramic layer.

An optical full-field technique, called amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI), is used in this study to investigate the force-induced transverse vibration of an angle-ply laminated composite embedded with a piezoceramic layer (piezolaminated plates). The piezolaminated plates are excited by applying time-harmonic voltages to the embedded piezoceramic layer. Because clear fringe patterns will appear only at resonant frequencies, both the resonant frequencies and mode shapes of the vibrating piezolaminated plates with five different fiber orientation angles are obtained by the proposed AF-ESPI method. A laser Doppler vibrometer (LDV) system that has the advantage of high resolution and broad dynamic range also is applied to measure the frequency response of piezolaminated plates. In addition to the two proposed optical techniques, numerical computations based on a commercial finite element package are presented for comparison with the experimental results. Three different numerical formulations are used to evaluate the vibration characteristics of piezolaminated plates. Good agreements of the measured data by the optical method and the numerical results predicted by the finite element method (FEM) demonstrate that the proposed methodology in this study is a powerful tool for the vibration analysis of piezolaminated plates.

Journal Article↗

PubMed2002

Transition from transient response to steady state for a layered medium.

The transition from transient response to steady-state for a layered medium subjected to antiplane loadings is studied. The steady-state formula for a layered medium is derived and the solutions for a layered half-space are then expressed explicitly in the form of wave number integrals. The transient response solutions for a layered half-space are obtained by the convolution of time harmonic loading function with transient response formula derived analytically from an effective matrix method. Two layered half-spaces with different ratios of wave velocities in the layer and half-space are considered and investigated by means of extensive numerical results to show their quite different transition behavior. The numerical results indicate that transient responses will approach steady state after certain characteristic times when the transient effects die away. The transition phenomena and characteristic times are investigated in detail through the responses from near field to far field as well as from low frequency to high frequency.

Journal Article↗

PubMed2002

Inverse calculation of material parameters for a thin-layer system using transient elastic waves.

The inverse calculation of material parameters of a thin-layer system is investigated using transient elastic waves. The inverse problem is formulated as an optimization problem in which the norm of the discrepancies between the calculated and measured normal surface displacements is minimized through the simplex algorithm. The theoretical result is first solved using the Laplace transform and the transient response is then implemented analytically by Cagniard's method. In the experiment, the source time function is generated by the brittle fracture of a pencil lead on the surface of the thin-layer system, and a National Bureau of Standards (NBS) conical transducer is used to record the surface responses. To obtain reliable inverse results for material parameters, a two-step inverse calculation procedure is proposed. The recovered material parameters of the specimens agree well with the theoretical values and experimental results.

Journal Article↗