PubMed Health⌕ Search

Biomedical subjects

Christian Limberg

Publications and source records attributed to Christian Limberg.

13 recordsLinked to original sources
PubMed2006

Reactivity and properties of [-O-Bi(III...)O=Mo-]n chains.

A coordination polymer [Cp(O)2Mo-O-Bi(o-tolyl)2]n, II, containing Mo-O-Bi and Mo=O...Bi moieties was investigated with respect to its behavior in contact with OH- and Cp2MoH2 and as potential single source precursor in the polyol method. It turned out that hydroxide as a base breaks up the polymer to yield CpMoO3- and (o-tolyl)2BiOH. The latter polymerizes to give the coordination polymer [(o-tolyl)2BiOH]n, 1. Alternatively, 1 can be prepared by reacting [(o-tolyl)2Bi(hmpa)2]SO3CF3 with NBu4OH/H2O in thf/water. If, however, NBu4OH/MeOH is used in dichloromethane as the solvent, the (o-tolyl)2BiOH formed intermediately undergoes methanolysis, and finally, [(o-tolyl)2BiOMe]n, 3, is isolated. Although 1 and 3 are very similar compounds, their crystal structures differ significantly: while the structure of 1 is dominated by secondary bonding leading to seesaw-type coordination geometries around the Bi centers, the Bi atoms in 3 are coordinated in a distorted tetrahedral fashion, and secondary bonding plays only a minor role. If 1 is dissolved in a nonpolar, nonprotic solvent, condensation reactions occur immediately leading to [(o-tolyl)2BiOBi(o-tolyl)2], 2, which can be obtained on a preparative scale this way. Compound 3 which can be prepared in good yields may prove to be a useful starting material in bismuth chemistry. Here, it was shown to react with molybdocene dihydrides to provide stable Bi-substituted molybdocene monohydrides [(R)Cp2Mo(H)(Bi(o-tolyl)2)] (R = Me 4, R = H 5); compounds of that type were identified in solution before but had so far eluded isolation. Compound 4, whose crystal structure is discussed, also forms when II is treated with methylated molybdocene dihydride. This obviously leads to the formation of Mo-Bi bonds (--> 4), as well as Mo-OH units, which undergo condensation reactions leading to Mo-O-Mo moieties (i.e., [Cp2Mo2O5] is formed as a byproduct). The use of II as precursor in the polyol method successfully led to bismuthmolybdate nanoparticles (accompanied by crystallites); however, no single phase is obtained, but biphasic materials consisting of Bi(2)Mo2O9 and Bi2MoO6, whose ratio can be determined by the choice of the hydrolyzing reagent, are formed instead. One of these materials proved to be capable of sensing EtOH selectively at elevated temperatures.

Journal Article↗
PubMed2006

Mono- and dinuclear oxovanadium(V)calixarene complexes and their activity as oxidation catalysts.

The background of the investigation is constituted by reactive moieties and intermediates playing relevant roles on the surfaces of vanadiumoxide-based catalysts during the oxygenation/dehydrogenation of organic substrates. With the aim of modeling such species, a series of mono- and dinuclear charged and uncharged vanadium oxo complexes containing p-tert-butylated calix[4]arene and calix[8]arene ligands (denoted H4B and H8B' ', respectively, in the protonated forms) has been synthesized and characterized: PPh4[O=VB] ((PPh41), O=VB(OAc) (2), PPh4[O2V2HB' '] (3), and [mu-O(O=V(OMe))2B(Me2)] (4), where superscripts OAc and Me2 indicate that one or two protons of H4B are substituted by these residues, respectively. These compounds were analyzed both in solution and by means of single-crystal X-ray crystallography; it turned out that the crystal structures are retained on dissolution (2 changed only from the paco to the cone structure). In the case of 4, it could be shown that the bulk product consists of a mixture of two isomers (4t and 4c) differing in the relative positions of the vanadium-bound methoxy groups. Subsequently, all compounds were tested as catalysts for the oxidation of alcohols with O2. It turned out that the two dinuclear complexes efficiently catalyze the oxidation of 1-phenyl-1-propargyl alcohol and fluorenol; in addition, they even show some activity with respect to the oxidation of dihydroanthracene. This may hint to a higher activity of dinuclear sites on the surfaces of heterogeneous catalysts as well.

Journal Article↗
PubMed2006

Xanthene-based ligand with two adjacent beta-diiminato binding sites.

A novel potential ligand has been designed where two beta-dialdimine units are linked by a xanthene backbone (H2Xanthdim). The synthesis proceeds via a double vinamidinium salt and the products of its hydrolysis (containing eneamine/malonaldehyde units), which were converted into H2Xanthdim via a reaction with 2,3-dimethylaniline. The reaction of H2Xanthdim with n-butyllithium yields ((Et2O)Li)2Xanthdim, which was isolated and crystallized. The crystal structures of both H2Xanthdim and its lithium salt are discussed.

Journal Article↗
PubMed2004

"Bent bonds" between bismuth and carbon atoms as a result of C-H activation in Mo-Bi complexes.

The reaction of molybdocenedihydride with two equivalents of [Bi(OtBu)(3)] proceeds via alcohol elimination and provides the compound [Cp(2)Mo{Bi(OtBu)(2)}(2)] (1), which contains two Mo--Bi metal bonds, in good yields. If the two reagents are employed in a 1:1 ratio continuative condensation reactions occur. These initially lead to [{Cp(2)Mo}(2){mu-Bi(OtBu)}(2)] (2), which, however, is very unstable in solution and decomposes via additional alcohol elimination: Complex-induced proximity effects facilitate the cleavage of C--H bonds within the cyclopentadienyl ligands by the residual alkoxide ligands, so that spontaneously two further equivalents of alcohol are released, thereby yielding two isomeric compounds 3 and 4 with Cp ligands bridging Mo--Bi metal bonds: The first isomer (3) contains two mu(2)-eta(5):eta(1)-C(5)H(4) ligands, the second isomer (4) contains one bridging mu(3)-eta(5):eta(1):eta(1)-C(5)H(3) ligand. The binding of these ligands to molybdenum and bismuth atoms at the same time is made possible through "bent bonds" between the bismuth and certain carbon centres. These unusual bonding situations were analysed by means of calculations based on density functional theory (DFT), the atoms in molecules (AIM) theory, natural bond order (NBO) considerations and the electron localisation function (ELF). According to the results the bonds can be understood in terms of carbanionic centres interacting with bismuth cations (i.e. closed-shell interactions). The formation of these bonds and the thermodynamics/kinetics involved on going from 2 to 3 and 4 were also studied by theoretical methods, so that the product formation is rationalised. The crystal structures of all four new compounds were determined. These structures but also the properties and mechanisms of formation are discussed against the background of the corresponding results obtained while studying the system [(Me)Cp(2)MoH(2)]/[Bi(OtBu)(3)].

Journal Article↗
PubMed2003

The role of radicals in metal-assisted oxygenation reactions.

The oxo-functionalization of organic substrates with the aid of metal oxo moieties is of fundamental importance not only in nature but also in academic and industrial research. Nevertheless the corresponding reaction mechanisms remain among the most enigmatic in chemistry and few of them are understood in detail. Recent research efforts have resulted in significantly improved information: in the cases of many oxygenation reactions evidence has been provided for the occurrence radical intermediates, even though the high selectivity observed suggests to a different mechanism. Examples stem from various areas of chemistry and include processes involving molecular metal oxo complexes, gas-phase and matrix-isolated species, metalloenzymes, and solid-state oxide surfaces. This review treats this seemingly wide variety of systems with the aim of providing an overview of common reactivity patterns and principles, as well as open problems.

Journal Article↗
PubMed2002

Synthesis of heterometallic bismuth/molydenum alkoxides and their behavior on silica surfaces.

The reaction of [(C(3)H(5))Mo(CO)(2)(CH(3)CN)(2)Cl], 2, with [Bi(OCH(2)CH(2)OCH(3))(3)](2) on a large scale leads to the novel molybdenum/bismuth alkoxide [(C(3)H(5))Mo(CO)(2)(mu-kappa O,2 kappa O'-OCH(2)CH(2)OCH(3))(2)(mu-kappa O-OCH(2)CH(2)OCH(3))BiCl], 6, as the main product as well as to [(C(3)H(5))Mo(CO)(2)(mu-kappa O,2 kappa O'-OCH(2)CH(2)OCH(3))(2)(mu-Cl)BiCl], 4, as a byproduct. Both compounds were characterized by elemental analysis, IR, and NMR spectroscopy as well as by X-ray diffraction. If 6 is brought into contact with a large excess of silica gel, aggregation and condensation reactions are initiated, which led to clusters of ca. 200 nm size spread over the silica surface. When the resulting material is calcinated at 350 degrees C in the presence of O(2), all organic ligands are eliminated and the metal oxo units rearrange: SEM/EDX measurements showed afterward Mo-free bismuth oxo clusters with sizes between 30 and 1000 nm, which are distributed together with molybdenum oxo particles of lower nuclearity over the silica surface. If such a material is employed as a potential catalyst for the propene oxidation under technical conditions, no activity is observed. If, however, the process is performed under very low pressures, a conversion of 5% is found. This result is discussed in the context of the mechanism proposed for the technical oxidation of propene to acrolein on bismuthmolybdate catalysts.

Journal Article↗
PubMed1999

Reactive Intermediates in Olefin Oxidations with Chromyl Chloride. IR-Spectroscopic Proof for O=CrCl(2)-Epoxide Complexes.

After photolytic induction (411 nm) of the reaction between chromyl chloride and olefins in low-temperature matrixes, for the first time primary products of this system have been isolated and identified: the reaction of propylene yields O=CrCl(2).O=CHCH(2)CH(3) and while in the case of trans- and cis-2-butylene, OCrCl(2).O=C(CH(3))(CH(2)CH(3)) as well as OCrCl(2).(trans-2,3-butylene oxide) and OCrCl(2).(cis-2,3-butylene oxide) are obtained, respectively. Epoxide formation proceeds under complete retention of stereochemistry, and the regioselective reaction route leading to the carbonyl products can be suppressed if all hydrogen atoms at the olefinic bond are substituted: tetramethylethylene is selectively oxidized to tetramethylethylene oxide, which forms a complex with OCrCl(2). All products were characterized by IR spectroscopy, which was further supported by DFT calculations in certain cases. The mechanism leading to the formation of these products, their electronic states, and the implications of the matrix results on the thermal reactions of chromyl chloride are discussed.

Journal Article↗
PubMed1996

Modeling the Formation of Molybdenum Oxides from Alkoxides: Crystal Structures of [Mo(4)O(4)Cl(4)(&mgr;(2)-OEt)(4)(HOEt)(2)(&mgr;(3)-O)(2)] and [PPN](+)[Et(3)NH](+)[Cl(2)(O)Mo(&mgr;(2)-O)(2)Mo(O)Cl(2)](2)(-).

The reactions of the binuclear oxomolybdenum(V) complex [Cl(2)(O)Mo(&mgr;-OEt)(2)(&mgr;-HOEt)Mo(O)Cl(2)] (1) with Me(3)Si(allyl) and SbF(3) produce the compounds [Mo(6)O(6)Cl(6)(&mgr;(3)-O)(2)(&mgr;(2)-OEt)(6)(&mgr;(2)-Cl)(2)] (2) and [Mo(8)O(8)Cl(6)(&mgr;(3)-O)(4)(OH)(2)(&mgr;(2)-OH)(4)(&mgr;(2)-OEt)(4)(HOEt)(4)] (3), respectively. Treatment of 1 with the Lewis base PMe(3) affords the tetrameric complex [Mo(4)O(4)Cl(4)(&mgr;(2)-OEt)(4)(HOEt)(2)(&mgr;(3)-O)(2)] (4), which represents another link in the chain of clusters produced by the reactions of 1 and simulating the build-up of polymeric molybdenum oxides by sol-gel methods. The crystal structure of 4 has been determined [C(12)H(32)Cl(4)Mo(4)O(12), triclinic, P&onemacr;, a = 7.376(2) Å, b = 8.807(3) Å, c = 11.467(4) Å, alpha = 109.61(1) degrees, beta = 92.12(3) degrees, gamma = 103.75(2) degrees, Z = 1]. By contrast, reaction of 1 with the nitrogen base NEt(3), followed by treatment with [PPN]Cl.2H(2)O ([PPN](+) = [Ph(3)P=N=PPh(3)](+)), gives the complex [PPN](+)[Et(3)NH](+)[Cl(2)(O)Mo(&mgr;(2)-O)(2)Mo(O)Cl(2)](2)(-) (6) in 90% yield. Its crystal structure [C(36)H(30)Cl(4)MoNOP(2), triclinic, Pna2(1), a = 21.470(6) Å, b = 16.765(2) Å, c = 9.6155(14) Å, alpha = 90 degrees, beta = 90 degrees, gamma = 90 degrees, Z = 16] includes the anion [Cl(2)(O)Mo(&mgr;(2)-O)(2)Mo(O)Cl(2)](2)(-), which is a charged derivative of the species forming the gels in sol-gel processes starting from chloromolybdenum ethoxides. Furthermore, compound 1 is found to be catalytically active in esterification and dehydration reactions of alcohols.

Journal Article↗