Biomedical subjects

Christopher A Siedlecki

Publications and source records attributed to Christopher A Siedlecki.

At least 19 recordsLinked to original sources

PubMed2006

The regulation of integrin-mediated osteoblast focal adhesion and focal adhesion kinase expression by nanoscale topography.

An important consideration in developing physical biomimetic cell-stimulating cues is that the in vivo extracellular milieu includes nanoscale topographic interfaces. We investigated nanoscale topography regulation of cell functions using human fetal osteoblastic (hFOB) cell culture on poly(l-lactic acid) and polystyrene (50/50 w/w) demixed nanoscale pit textures (14, 29, and 45nm deep pits). Secondary ion mass spectroscopy revealed that these nanotopographic surfaces had similar surface chemistries to that of pure PLLA because of PLLA component surface segregation during spin casting. We observed that 14 and 29nm deep pit surfaces increased hFOB cell attachment, spreading, selective integrin subunit expression (e.g., alphav relative to alpha5, beta1, or beta3), focal adhesive paxillin protein synthesis and paxillin colocalization with cytoskeletal actin stress fibers, and focal adhesion kinase (FAK) and phosphorylated FAK (pY397) expression to a greater degree than did 45nm deep pits or flat PLLA surfaces. Considering the important role of integrin-mediated focal adhesion and intracellular signaling in anchorage-dependent cell function, our results suggest a mechanism by which nanostructured physical signals regulate cell function. Modulation of integrin-mediated focal adhesion and related cell signaling by altering nanoscale substrate topography will have powerful applications in biomaterials science and tissue engineering.

Biocompatible Materials↗

PubMed2006

Procoagulant activity of surface-immobilized Hageman factor.

Procoagulant activity of surface-immobilized coagulation factor XIIa (activated Hageman factor) is reported. Activity of FXIIa immobilized onto the surfaces of three silanized-glass procoagulants spanning a wide range of wettability was assayed in normal and FXII-deficient plasmas. Previously published mathematical models were used to characterize the procoagulant activity of protein-immobilized materials and soluble enzymes. Results show that FXIIa activity is unrelated to underlying procoagulant surface chemistry and is similar to soluble FXIIa activity. The uninfluential role of the surface on FXIIa suggests that the solid surface activates FXII in biomaterial-induced blood coagulation but is not otherwise involved in FXIIa activity as described by the classical mechanism.

Adsorption↗

PubMed2006

Autoactivation of blood factor XII at hydrophilic and hydrophobic surfaces.

Contact activation of blood factor XII (FXII, Hageman factor) in neat-buffer solution is shown not to be specific for anionic hydrophilic procoagulants as proposed by the accepted biochemistry of surface activation. Rather, FXII activation in the presence of plasma proteins leads to an apparent specificity for hydrophilic surfaces that is actually due to a relative diminution of the FXII-->FXIIa reaction at hydrophobic surfaces. FXII activation in neat-buffer solution was effectively instantaneous upon contact with either hydrophilic (fully water-wettable clean glass) or hydrophobic (poorly water-wettable silanized glass) procoagulant particles, with greater FXIIa yield obtained by activation with hydrophobic procoagulants. In sharp contrast, both activation rate and yield was found to be significantly attenuated at hydrophobic surfaces in the presence of plasma proteins. Putative FXIIa produced by surface activation with both hydrophilic and hydrophobic procoagulants was shown to hydrolyze blood factor XI (FXI) to the activated form FXIa (FXIFXIIa-->FXIa) that causes FXI-deficient plasma to rapidly coagulate.

Biocompatible Materials↗

PubMed2006

Sub-micron texturing for reducing platelet adhesion to polyurethane biomaterials.

Platelet adhesion is a key event in thrombus development on blood-contacting medical devices. It has been demonstrated that changes to the chemistry of a material surface can reduce platelet adhesion. In this work, it is hypothesized that sub-micron surface textures may also reduce adhesion via a decrease in the surface area of material with which platelets can make contact, and hence a decreased probability of interaction with adhesive ligands. A polyether(urethane urea) was textured with two different sizes of sub-micron pillars using a replication molding technique that did not alter the material surface chemistry. Adhesion of platelets was assessed in a physiologically relevant shear stress range of 0-67 dyn/cm2 using a rotating disk system. Platelets were immunofluorescently labeled and adhesion was compared on smooth and textured samples. Platelet adhesion was greatest at low shear stress ranging from 0 to 5 dyn/cm2, and sub-micron textures were observed to reduce platelet adhesion in this range. Additionally, non-adherent platelets did not demonstrate large-scale activation after exposure to textured samples. We conclude that surface textures with sub-platelet dimensions may reduce platelet adhesion from plasma to polyether(urethane urea) at low shear stress.

Animals↗

PubMed2006

Plasma coagulation response to surfaces with nanoscale chemical heterogeneity.

A mixed film bearing nanoscale domains of one chemical functionality surrounded by another chemical functionality is shown to prolong material-induced coagulation of whole human blood plasma. In comparison, surfaces with uniform silane chemistry or physical mixtures of control surfaces bearing two different, uniform silane chemistries are found to be much more efficient activators of plasma coagulation on a per-unit-area basis. Binary mixed films are deposited on glass substrates by the sequential adsorption of 0.0001% 3-aminopropyltriethoxysilane (APS) followed by 0.1% n-butyltrichlorosilane (BTS). Creation of APS islands in a sea of BTS is confirmed by atomic force microscopy in friction mode. Results suggest that some yet-to-be-determined interfacial phenomena, perhaps associated with protein adsorption near the interface, may be altered by this nanoscale spatially distributed chemical heterogeneity, causing a decrease in contact activation.

Blood Coagulation↗

PubMed2006

Atomic force microscopy visualization of poly(urethane urea) microphase rearrangements under aqueous environment.

Polyurethane biomaterials are a critically important class of polymers used in a variety of medical devices. It has been suggested that the good blood compatibility of polyurethanes arises from nanoscale chemical heterogeneities at the surface as a consequence of the microphase separated morphology. In this study, we used tapping mode atomic force microscopy with phase imaging under aqueous conditions to visualize the distribution of the surface microphases for a series of poly(urethane urea) block co-polymers with varying hard segment content. The surfaces were prehydrated for 24 h under a flow of 1 mM phosphate buffer. Topographic images showed the formation of nanometer-sized raised features on the surface, having lateral dimensions of 50-70 nm and heights of 10-15 nm. Phase images, reflecting the local distribution of the mechanical properties under aqueous conditions, were quite different from those obtained in ambient conditions, consistent with water-induced structural reorientation. Images suggest that there is little soft phase material at the polymer surface in the presence of water, while images acquired after dehydration of the samples show that the surface layer remains rich in hard domains, indicating that the films do not return to their original states over the time period studied.

Microscopy, Atomic Force↗

PubMed2005

Mathematical modeling of material-induced blood plasma coagulation.

Contact activation of the intrinsic pathway of the blood coagulation cascade is initiated when a procoagulant material interacts with coagulation factor XII, (FXII) yielding a proteolytic enzyme FXIIa. Procoagulant surface properties are thought to play an important role in activation. To study the mechanism of interaction between procoagulant materials and blood plasma, a mathematical model that is similar in form and in derivation to Michaelis-Menten enzyme kinetics was developed in order to yield tractable relationships between dose (surface area and energy) and response (coagulation time (CT)). The application of this model to experimental data suggests that CT is dependent on the FXIIa concentration and that the amount of FXIIa generated can be analyzed using a model that is linearly dependent on contact time. It is concluded from these experiments and modeling analysis that the primary mechanism for activation of coagulation involves autoactivation of FXII by the procoagulant surface or kallikrein-mediated reciprocal activation of FXII. FXIIa-induced self-amplification of FXII is insignificant.

Blood Coagulation↗

PubMed2005

AFM imaging of ligand binding to platelet integrin alphaIIbbeta3 receptors reconstituted into planar lipid bilayers.

The platelet integrin alphaIIbbeta3 plays a key role in platelet adhesion, activation, and aggregation at the subendothelium and at protein-coated synthetic biomaterials. In this study, interactions between alphaIIbbeta3 and both protein and peptide ligands for the receptor were imaged under physiological conditions by high-resolution atomic force microscopy (AFM). To directly image the ligand-receptor interactions, alphaIIbbeta3 receptors were reconstituted into a supported lipid bilayer formed on a mica surface in the AFM fluid cell assembly and subsequently activated with Mn2+. Fibrinogen, the natural protein ligand for the integrin, as well as a nanogold-labeled peptide ligand (an RGD-containing heptamer) were infused into the AFM fluid cell, incubated with the reconstituted and activated receptors, and imaged under buffer. Height images illustrating topographical features showed the integrin reconstituted in the bilayer. Fibrinogen molecules binding to the receptors were easily observed in the height images, with fibrinogen showing its characteristic trinodular structure and occasionally bridging integrin receptors. Fibrinogen was observed to bind to integrins at the D-domain consistent with the location of the gamma-chain dodecapeptide, while fibrinogen bridging integrins bound to receptors on opposite sides of the protein consistent with a 2-fold axis of symmetry. Peptide ligands were not visible in height images; however, phase images that map the mechanical properties detected the nanogold labels and demonstrated the presence of peptide ligands bound to the receptors. The results demonstrate the ability of this high-resolution microscopy technique to directly visualize single ligand/receptor interactions in a dynamic and physiologically relevant environment, and establish a framework for future fundamental studies of single protein/receptor interactions during normal pathological processes as well as biomaterial surface-induced thrombosis.

Blood Platelets↗

PubMed2005

Human foetal osteoblastic cell response to polymer-demixed nanotopographic interfaces.

Nanoscale cell-substratum interactions are of significant interest in various biomedical applications. We investigated human foetal osteoblastic cell response to randomly distributed nanoisland topography with varying heights (11, 38 and 85 nm) produced by a polystyrene (PS)/polybromostyrene polymer-demixing technique. Cells displayed island-conforming lamellipodia spreading, and filopodia projections appeared to play a role in sensing the nanotopography. Cells cultured on 11 nm high islands displayed significantly enhanced cell spreading and larger cell dimensions than cells on larger nanoislands or flat PS control, on which cells often displayed a stellate shape. Development of signal transmitting structures such as focal adhesive vinculin protein and cytoskeletal actin stress fibres was more pronounced, as was their colocalization, in cells cultured on smaller nanoisland surfaces. Cell adhesion and proliferation were greater with decreasing island height. Alkaline phosphatase (AP) activity, an early stage marker of bone cell differentiation, also exhibited nanotopography dependence, i.e. higher AP activity on 11 nm islands compared with that on larger islands or flat PS. Therefore, randomly distributed island topography with varying nanoscale heights not only affect adhesion-related cell behaviour but also bone cell phenotype. Our results suggest that modulation of nanoscale topography may be exploited to control cell function at cell-biomaterial interfaces.

Actins↗

PubMed2005

Procoagulant stimulus processing by the intrinsic pathway of blood plasma coagulation.

Potentiation of the intrinsic pathway of human blood plasma coagulation in vitro by contact with a solid procoagulant surface leads to bolus release of thrombin (FIIa) in concentration proportion to the intensity of activation as measured by procoagulant surface area or energy (water wettability). This rather remarkable finding is confirmed using two different assays: one triggering coagulation substantially through the intrinsic pathway alone and the second triggering coagulation through the intrinsic pathway in the presence of exogenous FIIa spikes. Similarity of experimental outcomes of these assays strongly suggests that endogenous FIIa production through the intrinsic pathway is independent of the absolute amount of FIIa present in plasma. Furthermore, we corroborate previous work indicating that procoagulant surfaces remain activating after repeated use and are not poisoned or denatured in the process of activating plasma coagulation. It is concluded that the sharp control mechanism that gives rise to bolus-production of FIIa from the intrinsic pathway must occur between surface activation of FXII and the FII --> FIIa step, is not related to inhibition by FIIa, and does not involve deactivation of procoagulant surfaces.

Biocompatible Materials↗

PubMed2005

Liquid-vapor interfacial tension of blood plasma, serum and purified protein constituents thereof.

A systematic study of water-air (liquid-vapor, LV) interfacial tension gamma(lv) of blood plasma and serum derived from four different mammalian species (human, bovine, ovine and equine) reveals nearly identical concentration-dependence (dgamma(lv)/dlnC(B); where C(B) is plasma/serum dilution expressed in v/v concentration units). Comparison of results to a previously-published survey of purified human-blood proteins further reveals that dgamma(lv)/dlnC(B) of plasma and serum is surprisingly similar to that of purified protein constituents. It is thus concluded that any combination of blood-protein constituents will be substantially similar because dgamma(lv)/dlnC(B) of individual proteins are very similar. Experimental results are further interpreted in terms of a recently-developed theory emphasizing the controlling role of water in protein adsorption. Accordingly, the LV interphase saturates with protein adsorbed from bulk solution at a fixed weight-volume concentration ( approximately 436 mg/mL) independent of protein identity or mixture. As a direct consequence, dgamma(lv)/dlnC(B) of purified proteins closely resembles that of mixed solutions and does not depend on the relative proportions of individual proteins comprising a mixture. Thus variations in the plasma proteome between species are not reflected in dgamma(lv)/dlnC(B) nor is serum different from plasma in this regard, despite being depleted of coagulation proteins (e.g. fibrinogen). A comparison of pendant-drop and Wilhelmy-balance tensiometry as tools for assessing protein gamma(lv) shows that measurement conditions employed in the typical Wilhelmy plate approach fails to achieve the steady-state adsorption state that is accessible to pendant-drop tensiometry.

Animals↗

PubMed2005

Adhesion mode atomic force microscopy study of dual component protein films.

Molecular recognition imaging by AFM was extended to dual component protein films adsorbed on mica. AFM probes were functionalized by covalently linking polyclonal antibodies against fibrinogen. Adhesion mapping mode of AFM was used to generate both topographic images and adhesion images. The efficacy of the functionalized probes was first established by performing adhesion mapping on patterned dual component protein films formed by microcontact printing bovine serum albumin on a mica surface and then backfilling with fibrinogen. Next, adhesion mapping was done on randomly distributed two-component protein monolayers generated by sequential adsorption of submonolayer amounts of fibrinogen followed by backfilling with bovine serum albumin. The adhesion maps were used to generate binary recognition images where the specific and non-specific interactions were differentiated based on a statistically derived cut-off value. The surface coverage of fibrinogen obtained from the recognition image over the complete dual protein monolayer was similar to that obtained prior to backfilling with bovine serum albumin. The number of recognition events that were observed decreased by >80% after blocking the surface with anti-fibrinogen antibodies. This result demonstrated that the positive events in the recognition image were indeed specific antibody-fibrinogen interactions.

Adsorption↗

PubMed2004

Time-dependent conformational changes in fibrinogen measured by atomic force microscopy.

Tapping-mode atomic force microscopy was used to study the time-dependent changes in the structure of fibrinogen under aqueous conditions following adsorption on two model surfaces: hydrophobic graphite and hydrophilic mica. Fibrinogen was observed in the characteristic trinodular form, and the dimensions of the adsorbed molecules were consistent with previously reported values for these surfaces. On the basis of the differences in the relative heights of the D and the E domains, four orientation states were observed for fibrinogen adsorbed on both the surfaces. On graphite, the initial asymmetric orientation states disappeared with spreading over time. Some small lateral movements of the adsorbed proteins were observed on mica during repeated scanning, whereas no such movement was observed on graphite, indicating strong adhesion of fibrinogen to a hydrophobic surface. Spreading kinetics of fibrinogen on the two surfaces was determined by measuring the heights of the D and E domains over a time period of approximately 2 h. On graphite, the heights of both the D and E domains decreased with time to a lower plateau value of 1.0 nm. On mica, the heights of both the D and E domains showed an increase, rising to an upper plateau value of approximately 2.1 nm. The spreading of the D and E domains on graphite was analyzed using an 'exponential-decay-of-height' model. A spreading rate constant of approximately 4.7 x 10(-4) s(-1) was observed for the whole fibrinogen molecule adsorbed on graphite, corresponding to a free energy of unfolding of approximately 37 kT. Extrapolation of the exponential curve in the model to t = 0 yielded values of 2.3 and 2.2 nm for the heights of the D and the E domains at the time of contact with the hydrophobic graphite substrate, significantly less than their free solution diameters. A two-step spreading model is proposed to explain this observation.

Journal Article↗

PubMed2004

Mixology of protein solutions and the Vroman effect.

Mixing rules stipulating both concentration and distribution of proteins adsorbed to the liquid-vapor (LV) interphase from multicomponent aqueous solutions are derived from a relatively straightforward protein-adsorption model. Accordingly, proteins compete for space within an interphase separating bulk-vapor and bulk-solution phases on a weight, not molar, concentration basis. This results in an equilibrium weight-fraction distribution within the interphase that is identical to bulk solution. However, the absolute interphase concentration of any particular protein adsorbing from an m-component solution is 1/mth that adsorbed from a pure, single-component solution of that protein due to competition with m - 1 constituents. Applied to adsorption from complex biological fluids such as blood plasma and serum, mixing rules suggest that there is no energetic reason to expect selective adsorption of any particular protein from the mixture. Thus, dilute members of the plasma proteome are overwhelmed at the hydrophobic LV surface by the 30 classical plasma proteins occupying the first 5 decades of physiological concentration. Mixing rules rationalize the experimental observations that (i) concentration-dependent liquid-vapor interfacial tension, gammalv, of blood plasma and serum (comprised of about 490 different proteins) cannot be confidently resolved, even though serum is substantially depleted of coagulable proteins (e.g., fibrinogen), and (ii) gammalv of plasma is startlingly similar to that of purified protein constituents. Adsorption-kinetics studies of human albumin (66.3 kDa) and IgM (1000 kDa) binary mixtures revealed that relatively sluggish IgM molecules displace faster-moving albumin molecules adsorbing to the LV surface. This Vroman-effect-like process leads to an equilibrium gammalv reflecting the linear combination of weight/volume concentrations at the surface predicted by theory. Thus, the Vroman effect is interpreted as a natural outcome of protein reorganization to achieve an equilibrium interphase composition dictated by a firm set of mixing rules.

Adsorption↗

PubMed2004

Scaled interfacial activity of proteins at the liquid-vapor interface.

A principal conclusion drawn from observations of time- and concentration-dependent liquid-vapor (LV) interfacial tension gamma(lv) of a diverse selection of proteins ranging from albumin to ubiquitin spanning nearly three decades in molecular weight (MW) is that concentration scaling substantially alters perception of protein interfacial activity as measured by reduction in gamma(lv). Proteins appear more similar than dissimilar on a weight/volume basis, whereas molarity scaling reveals a "Traube-rule" ordering by MW, suggesting that adsorption is substantially driven by solution concentration rather than diversity in protein amphilicity. Scaling as a ratio-to-physiological-concentration demonstrates that certain proteins exhibit the full possible range of interfacial activity at and well-below physiological concentration, whereas others are only weakly surface active within this range, requiring substantially higher solution concentration to achieve reduction in gamma(lv). Important among this latter category of proteins are the blood factors XII and XIIa, assumed by the classical biochemical mechanism of plasma coagulation to adsorb to procoagulant surfaces, even in the presence of overwhelming concentrations of other blood constituents such as albumin and immunoglobulin that are shown by this work to be among the class of highly surface-active proteins at physiologic concentration. A comparison of pendant drop and Wilhelmy balance tensiometry as tools for assessing protein interfacial activity shows that measurement conditions employed in the typical Wilhelmy plate approach fails to achieve the steady-state adsorption condition that is accessible to pendant drop tensiometry.

Adsorption↗

PubMed2004

The platelet integrin alpha(IIb) beta(3) imaged by atomic force microscopy on model surfaces.

The platelet membrane receptor alpha(IIb) beta(3) binds to adsorbed protein ligands including fibrinogen, von Willebrand factor and fibronectin, and is critically important in mediating platelet adhesion to damaged subendothelium and to synthetic biomaterial surfaces. This receptor is a member of the integrin family, a highly prevalent class of heterodimeric molecules consisting of a single alpha and beta subunit. In an ongoing effort to understand the mechanisms underlying platelet adhesion events, high-resolution atomic force microscopy (AFM) under dynamic conditions was used to obtain images of alpha(IIb) beta(3) molecules as well as aggregates of the protein. Images of integrin molecules were obtained by tapping mode AFM under aqueous buffer conditions following adsorption on a series of ultrasmooth model surfaces. On a model hydrophobic surface, detergents stabilizing the protein in solution competed for surface adsorption sites. When this detergent was removed from the system, the protein was predominantly seen as aggregates with head groups pointing outward. A limited number of individual integrin molecules were observed, and were found to have dimensions consistent with those reported previously by electron microscopy studies. Integrin molecules showed weak adhesion to the two hydrophilic surfaces used in the study, although formation of a lipid bilayer around surface-adsorbed molecules improved the resolution. At longer time periods, the integrin molecules embedded in this lipid bilayer exhibited sufficient mobility to form molecular aggregates. The structural measurements described in this study not only reveal three-dimensional features of the molecule, they represent an important step towards dynamic adsorption experiments and visualizing the integrin interacting with surface-adsorbed proteins as in biomaterial-induced thrombogenesis.

Adsorption↗

PubMedDate not supplied

Osteoblast adhesion on poly(L-lactic acid)/polystyrene demixed thin film blends: effect of nanotopography, surface chemistry, and wettability.

Biomaterial surface characteristics are critical cues that regulate cell function. We produced a novel series of poly(l-lactic acid) (PLLA) and polystyrene demixed nanotopographic films to provide nonbiological cell-stimulating cues. The increase in PLLA weight fraction (phi) in blend solutions resulted in topography changes in spin-cast films from pit-dominant to island-dominant morphologies having nanoscale depth or height (3-29 nm). Lower molecular weight PLLA segregated to the top surface of demixed films, as observed by X-ray photoelectron spectroscopy and secondary ion mass spectroscopy (SIMS). For phi > or = 0.5, the topmost film layer was predominantly filled with PLLA (>96% by SIMS at 20-A depth). Nanotextured substrata stimulated osteoblastic cell adhesion to a greater degree than did flat PLLA (phi = 1), and this effect was more pronounced for nanoisland (phi = 0.7 and 0.9) relative to nanopit topographies (phi = 0.5). Demixed films having relatively lower water contact angles generally enhanced cell adhesion and spreading. Our results reveal that cell adhesion is affected by surface chemistry, topography, and wettability simultaneously and that nanotextured surfaces may be utilized in regulating cell adhesion.

Adhesiveness↗

PubMedDate not supplied

Development of novel submicron textured polyether(urethane urea) for decreasing platelet adhesion.

Ventricular assist devices have proven to be a useful clinical option for providing circulatory support as a bridge to transplantation and a mode of destination therapy. Thromboembolism is prevented by designing devices that use blood interfaces that either encourage biological material deposition and strong adhesion, or discourage deposition via surface chemistry, surface finish, and fluid flow fields. Minimum continuous or periodic wall shear forces and maximum time at reduced shear are important, and sometimes difficult-to-satisfy, design constraints. We present an approach to reducing platelet adhesion via surface topography, reducing surface area for platelet-material interaction. Large areas of polyether(urethane urea) were textured with two different sizes of ordered pillar arrays via two-stage replication molding without affecting surface chemistry. Pillars had subplatelet dimensions designed to reduce the surface area a platelet may contact. Platelet adhesion was assessed in a physiologically relevant shear stress range from 0-10 dyn/cm2 using a rotating disk and compared to smooth control. Adhesion was highest from 0-5 dyn/cm2. Surface texturing reduced platelet adhesion without increasing platelet activation in bulk suspension. This study demonstrates that material surface texture is an additional variable that may be used to reduce platelet adhesion under low shear stresses potentially reducing thromboembolism.

Biocompatible Materials↗