PubMed Health⌕ Search

Biomedical subjects

Christopher C Cummins

Publications and source records attributed to Christopher C Cummins.

At least 19 recordsLinked to original sources
PubMed2006

A cycle for organic nitrile synthesis via dinitrogen cleavage.

In the presence of NaH, the reaction between N2 and Mo(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2) proceeds at room temperature to afford NMo(N[t-Bu]Ar)3 (95%). Lewis acidic silyl triflates (Me3SiOTf + pyridine or (i-Pr)3SiOTf) mediate a reaction between acid chlorides and NMo(N[t-Bu]Ar)3 to yield acyl imidos [RC(O)NMo(N[t-Bu]Ar)3][OTf] (R = Me, 92%; Ph, 75%; t-Bu, 64%). The reduction of [RC(O)NMo(N[t-Bu]Ar)3][OTf] by magnesium anthracene followed by treatment with Me3SiOTf affords molybdenum ketimides, R(Me3SiO)CNMo(N[t-Bu]Ar)3 (R = Me, 82%; Ph, 77%; t-Bu, 46%). Exposing R(Me3SiO)CNMo(N[t-Bu]Ar)3 to SnCl2 or ZnCl2 produces ClMo(N[t-Bu]Ar)3 (71-93% for SnCl2) and RCN (97-99%). Magnesium metal reduces ClMo(N[t-Bu]Ar)3 to Mo(N[t-Bu]Ar)3 (74%), completing a synthetic cycle. New strategies for the functionalization of sterically hindered nitrides and nitrile extrusion from d2 ketimides are presented in the context of a new route for derivatizing N2.

Journal Article↗
PubMed2006

Triple-bond reactivity of diphosphorus molecules.

We report a mild method for generating the diphosphorus molecule or its synthetic equivalent in homogeneous solution; the P2 allotrope of the element phosphorus is normally obtained only under extreme conditions (for example, from P4 at 1100 kelvin). Diphosphorus is extruded from a niobium complex designed for this purpose and can be trapped efficiently by two equivalents of an organic diene to produce an organodiphosphorus compound. Diphosphorus stabilized by coordination to tungsten pentacarbonyl can be generated similarly at 25 degrees C, and in this stabilized form it still efficiently consumes two organic diene molecules for every diphosphorus unit.

Journal Article↗
PubMed2006

Comparison of thermodynamic and kinetic aspects of oxidative addition of PhE-EPh (E = S, Se, Te) to Mo(CO)3(PR3)2, W(CO)3(PR3)2, and Mo(N[tBu]Ar)3 complexes. The role of oxidation state and ancillary ligands in metal complex induced chalcogenyl radical generation.

Enthalpies of oxidative addition of PhE-EPh (E = S, Se, Te) to the M(0) complexes M(PiPr3)2(CO)3 (M = Mo, W) to form stable complexes M(*EPh)(PiPr3)2(CO)3 are reported and compared to analogous data for addition to the Mo(III) complexes Mo(N[tBu]Ar)3 (Ar = 3,5-C6H3Me2) to form diamagnetic Mo(IV) phenyl chalcogenide complexes Mo(N[tBu]Ar)3(EPh). Reactions are increasingly exothermic based on metal complex, Mo(PiPr3)2(CO)3 < W(PiPr3)2(CO)3 < Mo(N[tBu]Ar)3, and in terms of chalcogenide, PhTe-TePh < PhSe-SePh < PhS-SPh. These data are used to calculate LnM-EPh bond strengths, which are used to estimate the energetics of production of a free *EPh radical when a dichalcogenide interacts with a specific metal complex. To test these data, reactions of Mo(N[tBu]Ar)3 and Mo(PiPr3)2(CO)3 with PhSe-SePh were studied by stopped-flow kinetics. First- and second-order dependence on metal ion concentration was determined for these two complexes, respectively, in keeping with predictions based on thermochemical data. ESR data are reported for the full set of bound chalcogenyl radical complexes (PhE*)M(PiPr3)2(CO)3; g values increase on going from S to Se, to Te, and from Mo to W. Calculations of electron densities of the SOMO show increasing electron density on the chalcogen atom on going from S to Se to Te. The crystal structure of W(*TePh)(PiPr3)2(CO)3 is reported.

Crystallography, X-Ray↗
PubMed2006

A diamagnetic dititanium(III) paddlewheel complex with no direct metal-metal bond.

Reaction of Ti[N(But)Ar]3 (Ar = 3,5-C6H3Me2 or Ar' = C6H5) with CO2 at -40 degrees C produces diamagmetic Ti(III) paddlewheel complexes with long Ti-Ti separations (>3.4 Angstrom), thus excluding direct Ti-Ti bonding. 1H NMR spectroscopy shows that the compounds are diamagnetic in solution in the temperature range of -65 to +70 degrees C. In the solid state, the diamagnetism was found to persist between 2 and 300 K. Calculations at the density functional theory level suggest that the diamagnetism results from antiferromagnetic coupling by superexchange through the ligand pi system.

Journal Article↗
PubMed2006

Benzonitrile extrusion from molybdenum(IV) ketimide complexes obtained via radical C-E (E = O, S, Se) bond formation: toward a new nitrogen atom transfer reaction.

Beta-elimination is explored as a possible means of nitrogen-atom transfer into organic molecules. Molybdenum(IV) ketimide complexes of formula (Ar[t-Bu]N)3Mo(N=C(X)Ph), where Ar = 3,5-Me2C6H3 and X = SC6F5, SeC6F5, or O2CPh, are formally derived from addition of the carbene fragment [:C(X)Ph] to the terminal nitrido molybdenum(VI) complex (Ar[t-Bu]N)3Mo identical with N in which the nitrido nitrogen atom is installed by scission of molecular nitrogen. Herein the pivotal (Ar[t-Bu]N)3Mo(N=C(X)Ph) complexes are obtained through independent synthesis, and their propensity to undergo beta-X elimination, i.e., conversion to (Ar[t-Bu]N)3MoX + PhC identical with N, is investigated. Radical C-X bond formation reactions ensue when benzonitrile is complexed to the three-coordinate molybdenum(III) complex (Ar[t-Bu]N)3Mo and then treated with 0.5 equiv of X2, leading to facile assembly of the key (Ar[t-Bu]N)3Mo(N=C(X)Ph) molecules. Treated herein are synthetic, structural, thermochemical, and kinetic aspects of (i) the radical C-X bond formation and (ii) the ensuing beta-X elimination processes. Beta-X elimination is found to be especially facile for X = O2CPh, and the reaction represents an attractive component of an overall synthetic cycle for incorporation of dinitrogen-derived nitrogen atoms into organic nitrile (R-C identical with N) molecules.

Journal Article↗
PubMed2006

A niobaziridine hydride system for white phosphorus or dinitrogen activation and N- or P-atom transfer.

This short review describes a breakthrough embodied by the synthesis of a niobaziridine hydride complex. This reactive entity reacts directly with white phosphorus to provide a bridging diphosphorus diniobium complex that upon reduction splits to afford a terminal niobium phosphide anion, isolated as its sodium salt. Reactions of the latter with acid chlorides constitute a new synthesis of phosphaalkynes, while treatment with chlorodiorganophosphanes leads to complexed 1,1-diorganophosphanylphosphinidene systems. Additionally, reactions of the sodium salt of the niobium phosphide anion with divalent main group element salts (E = Ge, Sn, or Pb) provide complexed triatomic EP2 triangles. Dinitrogen cleavage was realized via reduction of a heterodinuclear niobium/molybdenum dinitrogen complex, and this provided an entry to a nitrogen-15 labeled terminal nitride anion of niobium as its sodium salt. In a fashion analogous to the aforementioned phosphaalkyne synthesis, acid chlorides are transformed upon reaction with the niobium nitride anion into corresponding nitrogen-15 labeled organic nitriles. Complete synthetic cycles are achieved in both the phosphaalkyne and the organic nitrile syntheses, as the oxoniobium(v) byproduct can be recycled in high yield to the title niobaziridine hydride complex.

Alkynes↗
PubMed2006

Terminal, anionic carbide, nitride, and phosphide transition-metal complexes as synthetic entries to low-coordinate phosphorus derivatives.

Anionic terminal one-atom nitride, phosphide, and carbide complexes are excellent starting materials for the synthesis of ligands containing low-coordinate phosphorus centers in the protecting coordination sphere of the metal complex. Salt-elimination reactions with chlorophosphanes lead to phosphaisocyanide, iminophosphinimide, and diorganophosphanylphosphinidene complexes in which the unusual phosphorus ligands are stabilized by coordination. X-ray structure analyses and density-functional calculations illuminate the bonding in these compounds.

Journal Article↗
PubMed2006

A nitridoniobium(V) reagent that effects acid chloride to organic nitrile conversion: synthesis via heterodinuclear (Nb/Mo) dinitrogen cleavage, mechanistic insights, and recycling.

The transformation of acid chlorides (RC(O)Cl) to organic nitriles (RC[triple bond]N) by the terminal niobium nitride anion [N[triple bond]Nb(N[Np]Ar)3]- ([1a-N]-, where Np = neopentyl and Ar = 3,5-Me2C6H3) via isovalent N for O(Cl) metathetical exchange is presented. Nitrido anion [1a-N]- is obtained in a heterodinuclear N2 scission reaction employing the molybdenum trisamide system, Mo(N[R]Ar)3 (R = t-Bu, 2a; R = Np, 2b), as a reaction partner. Reductive scission of the heterodinuclear bridging N2 complexes, (Ar[R]N)3Mo-(mu-N2)Nb(N[Np]Ar)3 (R = t-Bu, 3b; R = Np, 3c) with sodium amalgam provides 1 equiv each of the salt Na[1a-N] and neutral N[triple bond]Mo(N[R]Ar)3 (R = t-Bu, 2a-N; R = Np, 2b-N). Separation of 2-N from Na[1a-N] is readily achieved. Treatment of salt Na[1a-N] with acid chloride substrates in tetrahydrofuran (THF) furnishes the corresponding organic nitriles concomitant with the formation of NaCl and the oxo niobium complex O[triple bond]Nb(N[Np]Ar)3 (1a-O). Utilization of 15N-labeled 15N2 gas in this chemistry affords a series of 15N-labeled organic nitriles establishing the utility of anion [1a-N]- as a reagent for the 15N-labeling of organic molecules. Synthetic and computational studies on model niobium systems provide evidence for the intermediacy of both a linear acylimido and niobacyclobutene species along the pathway to organic nitrile formation. High-yield recycling of oxo 1a-O to a niobium triflate complex appropriate for heterodinuclear N2 scission has been developed. Specifically, addition of triflic anhydride (Tf2O, where Tf = SO2CF3) to an Et2O solution of 1a-O provides the bistriflate complex, Nb(OTf)2(N[Np]Ar)3 (1a-(OTf)2), in near quantitative yield. One-electron reduction of 1a-(OTf)2 with either cobaltocene (Cp2Co) or Mg(THF)3(anthracene) provided the monotriflato complex, Nb(OTf)(N[Np]Ar)3 (1a-(OTf)), which efficiently regenerates complexes 3b and 3c when treated with the molybdenum dinitrogen anions [N2Mo(N[t-Bu]Ar)3]- ([2a-N2]-) or [N2Mo(N[Np]Ar)3]- ([2b-N2]-), respectively.

Journal Article↗
PubMed2005

Mechanism of white phosphorus activation by three-coordinate molybdenum(III) complexes: a thermochemical, kinetic, and quantum chemical investigation.

White phosphorus (P(4)) reacts with three-coordinate molybdenum(III) trisamides or molybdaziridine hydride complexes to produce either bridging or terminal phosphide (P(3)(-)) species, depending upon the ancillary ligand steric demands. Thermochemical measurements have been made that place the MoP triple bond dissociation enthalpy at 92.2 kcal.mol(-)(1). Thermochemical measurements together with computational analysis rule out simple P-atom abstraction from P(4) as a step in the phosphorus activation mechanism. Kinetic measurements made by the stopped-flow method show that the reaction between the monomeric molybdenum complexes and P(4) is first-order both in metal complex and in P(4). Cyclo-P(3) complexes can be obtained when ancillary ligand steric demands are small, but kinetic measurements rule them out as monometallic intermediates in the P(4) activation mechanism. Also studied by calorimetric, kinetic, and in one case variable-temperature NMR methods is the process of mu-phosphide bridge formation. Post-rate-determining steps of the P(4) activation process were examined in a search for minima on the reaction's potential energy surface, leading to the proposal of two plausible, parallel, bimetallic reaction channels.

Journal Article↗
PubMed2005

Heterobimetallic reductive cross-coupling of benzonitrile with carbon dioxide, pyridine, and benzophenone.

Described herein are heterobimetallic radical cross-coupling reactions between the benzonitrile adduct of the molybdenum(III) complex Mo(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2) and titanium(III) complexes with carbon dioxide, pyridine, and benzophenone. The titanium(III) system employed was either Ti(N[t-Bu]Ar)3 (Ar = 3,5-C6H3Me2) or Ti(N[t-Bu]Ph)3. Crystal structure studies are described for the Mo/PhCN/CO2/Ti coupled system and for an analogue of the Mo/PhCN/Ph2CO/Ti coupled system in which PhCN is replaced with 2,6-Me2C6H3CN. In the case of the couplings involving pyridine and benzophenone, C-C bond formation takes place with dearomatization, with the new C-C bond being formed between the nitrile carbon of PhCN and the para carbon of pyridine or one of the benzophenone phenyl groups. Of the radical metal complex/substrate adducts invoked in this work, that between titanium(III) and CO2 is the only one not directly observable. In all cases, the selective cross-coupling reactions are interpreted as arising by heterodimerization of titanium(III) substrate complexes (substrate = CO2, py, or Ph2CO) with the persistent molybdenum-PhCN radical adduct. All of the heterobimetallic coupling products are diamagnetic, and the metal ions Ti and Mo in them both are assigned to the formal 4+ oxidation state.

Journal Article↗
PubMed2005

Solution calorimetric and stopped-flow kinetic studies of the reaction of *Cr(CO)3C5Me5 with PhSe-SePh and PhTe-TePh. Experimental and theoretical estimates of the Se-Se, Te-Te, H-Se, and H-Te bond strengths.

The kinetics of the oxidative addition of PhSeSePh and PhTeTePh to the stable 17-electron complex *Cr(CO)3C5Me5 have been studied utilizing stopped-flow techniques. The rates of reaction are first-order in each reactant, and the enthalpy of activation decreases in going from Se (deltaH(double dagger) = 7.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -22 +/- 3 eu) to Te (deltaH(double dagger) = 4.0 +/- 0.5 kcal/mol, deltaS(double dagger) = -26 +/- 3 eu). The kinetics of the oxidative addition of PhSeH and *Cr(CO)3C5Me5 show a change in mechanism in going from low (overall third-order) to high (overall second-order) temperatures. The enthalpies of the oxidative addition of PhE-EPh to *Cr(CO)3C5Me5 in toluene solution have been measured and found to be -29.6, -30.8, and -28.9 kcal/mol for S, Se, and Te, respectively. These data are combined with enthalpies of activation from kinetic studies to yield estimates for the solution-phase PhE-EPh bond strengths of 46, 41, and 33 kcal/mol for E = S, Se, and Te, respectively. The corresponding Cr-EPh bond strengths are 38, 36, and 31 kcal/mol. Two methods have been used to determine the enthalpy of hydrogenation of PhSeSePh in toluene on the basis of reactions of HSPh and HSePh with either *Cr(CO)3C5Me5 or 2-pyridine thione. These data lead to a thermochemical estimate of 72 kcal/mol for the PhSe-H bond strength in toluene solution, which is in good agreement with kinetic studies of H atom transfer from HSePh at higher temperatures. The reaction of H-Cr(CO)3C5Me5 with PhSe-SePh is accelerated by the addition of a Cr radical and occurs via a rapid radical chain reaction. In contrast, the reaction of PhTe-TePh and H-Cr(CO)3C5Me5 does not occur at any appreciable rate at room temperature, even in the presence of added Cr radicals. This is in keeping with a low PhTe-H bond strength blocking the chain and implies that H-TePh < or = 63 kcal/mol. Structural data are reported for PhSe-Cr(CO)3C5Me5 and PhS-Cr(CO)3C5Me5. The two isostructural complexes do not show signs of an increase in steric strain in terms of metal-ligand bonds or angles as the Cr-EPh bond is shortened in going from Se to S. Bond strength estimates of the PhE-H and PhE-EPh derived from density functional theory calculations are in reasonable agreement with experimental data for E = Se but not for E = Te. The nature of the singly occupied molecular orbital of the *EPh radicals is calculated to show increasing localization on the chalcogenide atom in going from S to Se to Te.

Journal Article↗
PubMed2004

Phosphaalkynes from acid chlorides via P for O(Cl) metathesis: a recyclable niobium phosphide (P(3-)) reagent that effects C-P triple-bond formation.

Reported herein is a new, metathetical P for O(Cl) exchange mediated by an anionic niobium phosphide complex that furnished phosphaalkynes (RCP) from acid chlorides (RC(O)Cl) under mild conditions. The niobaziridine hydride complex, Nb(H)(tBu(H)C=NAr)(N[Np]Ar)2 (1, Np = neopentyl, Ar = 3,5-Me2C6H3), has been shown previously to react with elemental phosphorus (P4), affording the mu-diphosphide complex, (mu2:eta2,eta2-P2)[Nb(N[Np]Ar)3]2, (2), which can be subsequently reduced by sodium amalgam to the anonic, terminal phosphide complex, [Na][PNb(N[Np]Ar)3] (3). It is now shown that treatment of 3 with either pivaloyl (t-BuC(O)Cl) or 1-adamantoyl (1-AdC(O)Cl) chloride provides the thermally unstable niobacyles, (t-BuC(O)P)Nb(N[Np]Ar)3 (4-t-Bu) and (1-AdC(O)P)Nb(N[Np]Ar)3 (4-1-Ad), which are intermediates along the pathway to ejection of the known phosphaalkynes t-BuCP (5-t-Bu) and 1-AdCP(5-1-Ad). Phosphaalkyne ejection from 4-t-Bu and 4-1-Ad proceeds with formation of the niobium(V) oxo complex ONb(N[Np]Ar)3 (6) as a stable byproduct. Preliminary kinetic measurements for fragmentation of 4-t-Bu to 5-t-Bu and 6 in C6D6 solution are consistent with a first-order process, yielding the thermodynamic parameters DeltaH = 24.9 +/- 1.4 kcal mol-1 and DeltaS = 2.4 +/- 4.3 cal mol-1 K-1 over the temperature range 308-338 K. Separation of volatile 5-t-Bu from 6 after thermolysis has been readily achieved by vacuum transfer in yields of 90%. Pure 6 is recovered after vacuum transfer and can be treated with 1.0 equiv of triflic anhydride (Tf2O, Tf = O2SCF3) to afford the bistriflate complex, Nb(OTf)2(N[Np]Ar)3 (7), in high yield. Complex 7 provides direct access to 1 upon reduction with magnesium anthracene, thus completing a cycle of element activation, small-molecule generation via metathetical P-atom transfer, and deoxygenative recycling of the final niobium(V) oxo product.

Journal Article↗
PubMed2004

A homoleptic molybdenum(IV) enolate complex: synthesis, molecular and electronic structure, and NCN group transfer to form a terminal cyanoimide of molybdenum(VI).

A monomeric molybdenum(IV) tetrakis enolate complex Mo(OC[Ad]Mes)(4), 1, where Ad = 2-adamantylidene and Mes = 2,4,6-Me(3)C(6)H(2), has been synthesized and characterized structurally by X-ray diffraction, chemically through NCN group-transfer reactivity, and computationally to investigate the origins of the observed structure that is intermediate between tetrahedral and square planar. No prior examples of Mo(OR)(4) have been structurally characterized despite having been the subject of both experimental and theoretical interest. Complex 1 has a singlet ground state and thus a metal-based lone pair of electrons. The latter has been visualized with the aid of the electron localization function (ELF) and appears as a two-bladed propeller with D(2)(d)() symmetry. Complex 1 makes a simple 1:1 adduct with t-BuNC that is trigonal bipyramidal with an axial isocyanide as demonstrated by X-ray crystallography. This trigonal bipyramidal 1:1 adduct has a triplet ground state and provides a model for the way in which 1 interacts with NCN group donor dbabhCN prior to NCN group transfer to form the terminal cyanoimide complex 1-NCN. The calculated Mo-N bond dissociation enthalpy for 1-NCN is 104 kcal mol(-1), 30 kcal mol(-1) greater than that for the corresponding dissociation of NCN from cyanophosphiniminato NCNPMe(3).

Journal Article↗
PubMed2004

Organic nitriles from acid chlorides: an isovalent N for (O)CL exchange reaction mediated by a tungsten nitride complex.

Nitride NW(N[i-Pr]Ar)3 (1, Ar = 3,5-C6H3Me2) was synthesized in two steps from known NW(O-t-Bu)3 (41% overall yield). Complex 1 is the tungsten congener of NMo(N[i-Pr]Ar)3, a known molecule that has been synthesized using N2 as the nitrido nitrogen source, but which undergoes no reaction with pivaloyl chloride. Compound 1 undergoes metathesis with pivaloyl chloride at 25 degrees C to form the corresponding nitrile in 97% yield. Another substrate examined in this work was the labeled acid chloride 1-Ad13C(O)Cl (Ad = adamantyl). The "(O)Cl" moiety is transferred to tungsten forming an oxo-chloride, (Ar[i-Pr]N)3W(O)Cl (3), as the final tungsten product; both 1 and 3 were characterized structurally by X-ray diffraction. An intermediate observed in the nitrile-forming reaction was characterized spectroscopically to be a tungsten acylimido complex. The latter assignment was substantiated by the synthesis and structural characterization of the compound (Ar[i-Pr]N)3W(NC(O)CF3)(O2CCF3) (2m). In addition, density functional theory calculations performed using ADF lent insight into the thermochemistry of the overall process.

Journal Article↗