Biomedical subjects

Christopher C Moser

Publications and source records attributed to Christopher C Moser.

16 recordsLinked to original sources

PubMed2006

Resilience of Rhodobacter sphaeroides cytochrome bc1 to heme c1 ligation changes.

Typically, c hemes are bound to the protein through two thioether bonds to cysteines and two axial ligands to the heme iron. In high-potential class I c-type cytochromes, these axial ligands are commonly His-Met. A change in this methionine axial ligand is often correlated with a dramatic drop in the heme redox potential and loss of function. Here we describe a bacterial cytochrome c with an unusual tolerance to the alternations in the heme ligation pattern. Substitution of the heme ligating methionine (M185) in cytochrome c1 of the Rhodobacter sphaeroides cytochrome bc1 complex with Lys and Leu lowers the redox midpoint potential but not enough to prevent physiologically competent electron transfer in these fully functional variants. Only when Met-185 is replaced with His is the drop in the redox potential sufficiently large to cause cytochrome bc1 electron transfer chain failure. Functional mutants preserve the structural integrity of the heme crevice: only the nonfunctional His variant allows carbon monoxide to bind to reduced heme, indicating a significant opening of the heme environment. This range of cytochrome c1 ligand mutants exposes both the relative resilience to sixth axial ligand change and the ultimate thermodynamic limits of operation of the cofactor chains in cytochrome bc1.

Electron Transport Complex III↗

PubMed2006

Role of the PEWY glutamate in hydroquinone-quinone oxidation-reduction catalysis in the Qo Site of cytochrome bc1.

The glutamic acid residue of the conserved PEWY motif of the Q(o) site of cytochrome bc(1) is widely discussed as central to reversible Q(o) site catalysis of two-electron, two-proton hydroquinone-quinone oxidation-reduction. Extensive mutation of this glutamate (E295) to A, V, F, H, K, and Q in purple photosynthetic Rhodobacter capsulatus results in hydroquinone oxidation rates that are between 5 and 50-fold slower than that in the wild type. However, the mutants show little or no detectable effects on hydroquinone or quinone exchange and binding at the Q(o) site nor on subsequent Q(o) site-mediated redox equilibria in the c-chain and b-chain from pH 5-10. Lack of effects of mutations on the E(m)/pH plots rules out involvement of E295 in the strong electron-proton coupling evident in either the FeS center or heme b(L). These detailed equilibrium and kinetic analyses demonstrate that E295 is not irreplaceable in the Q(o) site catalytic mechanism. Rather, E295 and several other Q(o) site residues that can also be widely varied and still support hydroquinone oxidation illustrate the considerable resilience of Q(o) site activity to mutational change in Q(o) site environs. Residues and water molecules appear to cooperate in providing a physical and chemical environment supporting hydroquinone oxidation rates comparable to those seen in nonprotein aqueous environments at electrodes. We suggest that residues at the Q(o) site (and, possibly, other respiratory and photosynthetic quinone and oxygen binding sites) are a product of natural selection primarily acting not to lower catalytic barriers according to the traditional view of enzymatic catalysis but rather to develop specificity by raising barriers in defense of semiquinone loss or energy wasting short-circuit reactions.

Binding Sites↗

PubMed2006

Darwin at the molecular scale: selection and variance in electron tunnelling proteins including cytochrome c oxidase.

Biological electron transfer is designed to connect catalytic clusters by chains of redox cofactors. A review of the characterized natural redox proteins with a critical eye for molecular scale measurement of variation and selection related to physiological function shows no statistically significant differences in the protein medium lying between cofactors engaged in physiologically beneficial or detrimental electron transfer. Instead, control of electron tunnelling over long distances relies overwhelmingly on less than 14 A spacing between the cofactors in a chain. Near catalytic clusters, shorter distances (commonly less than 7 A) appear to be selected to generate tunnelling frequencies sufficiently high to scale the barriers of multi-electron, bond-forming/-breaking catalysis at physiological rates. We illustrate this behaviour in a tunnelling network analysis of cytochrome c oxidase. In order to surmount the large, thermally activated, adiabatic barriers in the 5-10 kcal mol-1 range expected for H+ motion and O2 reduction at the binuclear centre of oxidase on the 10(3)-10(5) s-1 time-scale of respiration, electron access with a tunnelling frequency of 10(9) or 10(10) s-1 is required. This is provided by selecting closely placed redox centres, such as haem a (6.9 A) or tyrosine (4.9 A). A corollary is that more distantly placed redox centres, such as CuA, cannot rapidly scale the catalytic site barrier, but must send their electrons through more closely placed centres, avoiding direct short circuits that might circumvent proton pumping coupled to haems a to a3 electron transfer. The selection of distances and energetic barriers directs electron transfer from CuA to haem a rather than a3, without any need for delicate engineering of the protein medium to 'hard wire' electron transfer. Indeed, an examination of a large number of oxidoreductases provides no evidence of such naturally selected wiring of electron tunnelling pathways.

Catalysis↗

PubMed2006

Electron tunneling chains of mitochondria.

The single, simple concept that natural selection adjusts distances between redox cofactors goes a long way towards encompassing natural electron transfer protein design. Distances are short or long as required to direct or insulate promiscuously tunneling single electrons. Along a chain, distances are usually 14 A or less. Shorter distances are needed to allow climbing of added energetic barriers at paired-electron catalytic centers in which substrate and the required number of cofactors form a compact cluster. When there is a short-circuit danger, distances between shorting centers are relatively long. Distances much longer than 14 A will support only very slow electron tunneling, but could act as high impedance signals useful in regulation. Tunneling simulations of the respiratory complexes provide clear illustrations of this simple engineering.

Animals↗

PubMed2006

Design and engineering of photosynthetic light-harvesting and electron transfer using length, time, and energy scales.

Decades of research on the physical processes and chemical reaction-pathways in photosynthetic enzymes have resulted in an extensive database of kinetic information. Recently, this database has been augmented by a variety of high and medium resolution crystal structures of key photosynthetic enzymes that now include the two photosystems (PSI and PSII) of oxygenic photosynthetic organisms. Here, we examine the currently available structural and functional information from an engineer's point of view with the long-term goal of reproducing the key features of natural photosystems in de novo designed and custom-built molecular solar energy conversion devices. We find that the basic physics of the transfer processes, namely, the time constraints imposed by the rates of incoming photon flux and the various decay processes allow for a large degree of tolerance in the engineering parameters. Moreover, we find that the requirements to guarantee energy and electron transfer rates that yield high efficiency in natural photosystems are largely met by control of distance between chromophores and redox cofactors. Thus, for projected de novo designed constructions, the control of spatial organization of cofactor molecules within a dense array is initially given priority. Nevertheless, constructions accommodating dense arrays of different cofactors, some well within 1 nm from each other, still presents a significant challenge for protein design.

Biophysical Phenomena↗

PubMed2005

Tunneling in PSII.

With available high resolution structures of PSII and a collection of reported redox midpoint potentials for most of the cofactors, it is possible to compare the expected electron tunneling rates with experimental rates to determine which electron transfer reactions are likely to reflect simply engineered electron tunneling, and which are more sophisticated and associated with large product rearrangements or the making and breaking of bonds. Reliable reorganization energies are largely lacking in this photosystem compared to PSI and purple bacteria and contribute about an order of magnitude uncertainty in tunneling rate estimates. Nevertheless it seems clear that as in purple bacterial reaction centers and PSI, with the notable exception of the oxygen evolving center, the majority of electron transfers within PSII are electron-tunneling limited at room temperature. Tunneling simulations also suggest that the short circuit between pheophytin and the adjacent chlorophyll cation may be fast enough to challenge triplet decay as the principle means of charge recombination from Q(A)(-) at room temperature.

Electron Transport↗

PubMed2005

Design of amphiphilic protein maquettes: controlling assembly, membrane insertion, and cofactor interactions.

We have designed polypeptides combining selected lipophilic (LP) and hydrophilic (HP) sequences that assemble into amphiphilic (AP) alpha-helical bundles to reproduce key structure characteristics and functional elements of natural membrane proteins. The principal AP maquette (AP1) developed here joins 14 residues of a heme binding sequence from a structured diheme-four-alpha-helical bundle (HP1), with 24 residues of a membrane-spanning LP domain from the natural four-alpha-helical M2 channel of the influenza virus, through a flexible linking sequence (GGNG) to make a 42 amino acid peptide. The individual AP1 helices (without connecting loops) assemble in detergent into four-alpha-helical bundles as observed by analytical ultracentrifugation. The helices are oriented parallel as indicated by interactions typical of adjacent hemes. AP1 orients vectorially at nonpolar-polar interfaces and readily incorporates into phospholipid vesicles with >97% efficiency, although most probably without vectorial bias. Mono- and diheme-AP1 in membranes enhance functional elements well established in related HP analogues. These include strong redox charge coupling of heme with interior glutamates and internal electric field effects eliciting a remarkable 160 mV splitting of the redox potentials of adjacent hemes that leads to differential heme binding affinities. The AP maquette variants, AP2 and AP3, removed heme-ligating histidines from the HP domain and included heme-ligating histidines in LP domains by selecting the b(H) heme binding sequence from the membrane-spanning d-helix of respiratory cytochrome bc(1). These represent the first examples of AP maquettes with heme and bacteriochlorophyll binding sites located within the LP domains.

Binding Sites↗

PubMed2005

Fixing the Q cycle.

Mitchell's key insight that all bioenergetic membranes run on the conversion of redox energy into transmembrane electrical and proton gradients took the form 30 years ago of a working model of the Q cycle of cytochrome bc1, which operates reversibly on coupled electron and proton transfers of quinone at two binding sites on opposite membrane faces. His remarkable model still stands today, but he had no structural information to provide understanding into how dangerous short-circuit redox reactions were avoided. Now, it is clear that the Q cycle must be fixed with a special mechanism that avoids semiquinone-mediated short circuits. Either the redox states of the quinone electron-transfer partners double-gate the semiquinone-intermediate stability, or semiquinone is avoided altogether in concerted double-electron transfer.

Electron Transport↗

PubMed2004

ATR-FTIR spectroscopy studies of iron-sulfur protein and cytochrome c1 in the Rhodobacter capsulatus cytochrome bc1 complex.

Redox transitions in the Rhodobacter capsulatus cytochrome bc(1) complex were investigated by perfusion-induced attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy combined with synchronous visible spectroscopy, in both the wild type and a cytochrome c(1) point mutant, M183K, in which the midpoint potential of heme was lowered from the wild-type value of 320 mV to 60 mV. Overall redox difference spectra of the wild type and M183K mutant were essentially identical, indicating that the mutation did not cause any major structural perturbation. Spectra were compared with data on the bovine bc(1) complex, and tentative assignments of several bands could be made by comparison with available data on model compounds and crystallographic structures. The bacterial spectra showed contributions from ubiquinone that were much larger than in the bovine enzyme, arising from additional bound and adventitious ubiquinone. The M183K mutant enabled selective reduction of the iron-sulfur protein which in turn allowed the IR redox difference spectra of ISP and cytochrome c(1) to be deconvoluted at high signal/noise ratios, and features of these spectra are interpreted in light of structural and mechanistic information.

Cytochromes c1↗

PubMed2004

Novel cyanide inhibition at cytochrome c1 of Rhodobacter capsulatus cytochrome bc1.

Oxidized cytochrome c(1) in photosynthetic bacterium Rhodobacter capsulatus cytochrome bc(1) reversibly binds cyanide with surprisingly high, micromolar affinity. The binding dramatically lowers the redox midpoint potential of heme c(1) and inhibits steady-state turnover activity of the enzyme. As cytochrome c(1), an auxiliary redox center of the high-potential chain of cytochrome bc(1), does not interact directly with the catalytic quinone/quinol binding sites Q(o) and Q(i), cyanide introduces a novel, Q-site independent locus of inhibition. This is the first report of a reversible inhibitor that manipulates the energetics and electron transfers of the high-potential redox chain of cytochrome bc(1), while maintaining quinone substrate catalytic sites in an intact form.

Binding Sites↗

PubMed2004

Reversible redox energy coupling in electron transfer chains.

Reversibility is a common theme in respiratory and photosynthetic systems that couple electron transfer with a transmembrane proton gradient driving ATP production. This includes the intensely studied cytochrome bc1, which catalyses electron transfer between quinone and cytochrome c. To understand how efficient reversible energy coupling works, here we have progressively inactivated individual cofactors comprising cytochrome bc1. We have resolved millisecond reversibility in all electron-tunnelling steps and coupled proton exchanges, including charge-separating hydroquinone-quinone catalysis at the Q(o) site, which shows that redox equilibria are relevant on a catalytic timescale. Such rapid reversibility renders popular models based on a semiquinone in Q(o) site catalysis prone to short-circuit failure. Two mechanisms allow reversible function and safely relegate short-circuits to long-distance electron tunnelling on a timescale of seconds: conformational gating of semiquinone for both forward and reverse electron transfer, or concerted two-electron quinone redox chemistry that avoids the semiquinone intermediate altogether.

Adenosine Triphosphate↗

PubMed2003

Functionalizing nanocrystalline metal oxide electrodes with robust synthetic redox proteins.

De novo designed synthetic redox proteins (maquettes) are structurally simpler, working counterparts of natural redox proteins. The robustness and adaptability of the maquette protein scaffold are ideal for functionalizing electrodes. A positive amino acid patch has been designed into a maquette surface for strong electrostatic anchoring to the negatively charged surfaces of nanocrystalline, mesoporous TiO(2) and SnO(2) films. Such mesoporous metal oxide electrodes offer a major advantage over conventional planar gold electrodes by facilitating formation of high optical density, spectroelectrochemically active thin films with protein loading orders of magnitude greater (up to 8 nmol cm(-2)) than that achieved with gold electrodes. The films are stable for weeks, essentially all immobilized-protein display rapid, reversible electrochemistry. Furthermore, carbon monoxide ligand binding to the reduced heme group of the protein is maintained, can be sensed optically and reversed electrochemically. Pulsed UV excitation of the metal oxide results in microsecond or faster photoreduction of an immobilized cytochrome and millisecond reoxidation. Upon substitution of the heme-group Fe by Zn, the light-activated maquette injects electrons from the singlet excited state of the Zn protoporphyrin IX into the metal oxide conduction band. The kinetics of cytochrome/metal oxide interfacial electron transfer obtained from the electrochemical and photochemical data obtained are discussed in terms of the free energies of the observed reactions and the electronic coupling between the protein heme group and the metal oxide surface.

Crystallization↗

PubMed2003

Mechanism for electron transfer within and between proteins.

Examination of a growing range of electron transfer proteins is clarifying what design elements are and are not naturally selected. Intraprotein electron transfer between natural redox centers is generally engineered to be robust and resistant to mutational changes and thermal fluctuations, by using chains of redox centers connected by electron tunneling distances of 14 A or less. This assures that tunneling rates are faster than the typical millisecond bond-breaking at catalytic sites. Interprotein electron transfer addresses the potential problem of slow diffusion by designing attractive docking sites that permit a conformational search for short tunneling distances.

Animals↗

PubMed2003

Hydrophilic to amphiphilic design in redox protein maquettes.

De novo protein design has created small, robust protein-cofactor complexes that serve as simplified working models, or maquettes, for the much more complicated natural oxidoreductases. We review the research avenues that spring from the better characterized water-soluble hydrophilic maquettes and guide the construction of amphiphilic maquettes patterned on membrane-bound oxidoreductases that couple electron transfer to transmembrane proton-motive force. We address the special working challenges and opportunities that arise with amphiphilic maquettes designed to assemble in membranes, along with the redox and pigment cofactors required to promote light activated electron transfer, redox-coupled electric field generation, proton exchange and transmembrane charge motion.

Electrons↗

PubMed2003

Length, time, and energy scales of photosystems.

The design of photosynthetic systems reflects the length scales of the fundamental physical processes. Energy transfer is rapid at the few angstrom scale and continues to be rapid even at the 50-A scale of the membrane thickness. Electron tunneling is nearly as rapid at the shortest distances, but becomes physiologically too slow well before 20 A. Diffusion, which starts out at a relatively slow nanosecond time scale, has the most modest slowing with distance and is physiologically competent at all biologically relevant distances. Proton transfer always operates on the shortest angstrom scale. The structural consequences of these distance dependencies are that energy transfer networks can extend over large, multisubunit and multicomplex distances and take leaps of 20 A before entering the domain of charge separating centers. Electron transfer systems are effectively limited to individual distances of 15 A or less and span the 50 A dimensions of the bioenergetic membrane by use of redox chains. Diffusion processes are generally used to cover the intercomplex electron transfer distances of 50 A and greater and tend to compensate for the lack of directionality by restricting the diffusional space to the membrane or the membrane surface, and by multiplying the diffusing species through the use of pools. Proton transfer reactions act over distances larger than a few angstroms through the use of clusters or relays, which sometimes rely on water molecules and which may only be dynamically assembled. Proteins appear to place a premium on robustness of design, which is relatively easily achieved in the long-distance physical processes of energy transfer and electron tunneling. By placing cofactors close enough, the physical process is relatively rapid compared to decay processes. Thus suboptimal conditions such as cofactor orientation, energy level, or redox potential level can be tolerated and generally do not have to be finely tuned. The most fragile regions of design tend to come in areas of complex formation and catalysis involving proton management, where relatively small changes in distance or mutations can lead to a dramatic decrease in turnover, which may already be limiting the overall speed of energy conversion in these proteins. Light-activated systems also face a challenge to robust function from the ever-present dangers of high redox potential chemistry. This can turn the protein matrix and wandering oxygen molecules into unintentional redox partners, which in the case of PSII requires the frequent, costly replacement of protein subunits.

Bacterial Proteins↗

PubMed2002

P450 BM3: the very model of a modern flavocytochrome.

Flavocytochrome P450 BM3 is a bacterial P450 system in which a fatty acid hydroxylase P450 is fused to a mammalian-like diflavin NADPH-P450 reductase in a single polypeptide. The enzyme is soluble (unlike mammalian P450 redox systems) and its fusion arrangement affords it the highest catalytic activity of any P450 mono-oxygenase. This article discusses the fundamental properties of P450 BM3 and how progress with this model P450 has affected our comprehension of P450 systems in general.

Bacterial Proteins↗