PubMed Health⌕ Search

Biomedical subjects

Christopher D Incarvito

Publications and source records attributed to Christopher D Incarvito.

At least 19 recordsLinked to original sources
PubMed2006

Carbon-oxygen bond formation between a terminal alkoxo ligand and a coordinated olefin. Evidence for olefin insertion into a rhodium alkoxide.

Preparation and reactivity of a series of bis(phosphine) rhodium(I) alkoxides stabilized by intramolecular olefin coordination are reported. {Rh(PEt3)2[kappa1:eta2-OCRR'(CH2)nCH=CH2]} (n = 1, 2) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2]} by the corresponding alcohols HOCRR'(CH2)nCH=CH2. The in situ generated {Rh(PEt3)2[kappa1:eta2-OCRR'(CH2)2CH=CH2]} were not stable at ambient temperatures and decomposed in the presence of added PEt3 to afford 2,2-disubstituted-5-methylenetetrahydrofurans and [(PEt3)4Rh-H] in good to high yields. Kinetic and deuterium labeling results support a syn-oxyrhodation pathway via direct olefin insertion into a Rh-O bond, followed by rapid beta-hydride elimination. In comparison, {Rh(PEt3)2[kappa1:eta2-OCRR'CH2CH=CH2]} are isolated as stable crystals, and the Rh-olefin interactions are evidenced by an X-ray structure. Heating of these complexes generated [Rh(PEt3)2(eta2-allyl)] and the corresponding ketones in high yields following an apparent beta-allyl elimination pathway.

Journal Article↗
PubMed2006

Organometallic chemistry of amidate complexes. accelerating effect of bidentate ligands on the reductive elimination of N-aryl amidates from palladium(II).

We report a series of arylpalladium complexes of acetamidate, sulfonamidate, and deprotonated oxazolidinone ligands that undergo reductive elimination with rates and yields that depend on the binding mode of the ancillary and amidate ligands. Complexes of the acetamidate ligands containing the bidentate phosphines DPPF and Xantphos as ancillary ligands undergo reductive elimination. The rate and yield were higher from the complex ligated by Xantphos, which contains a larger bite angle. In contrast, the analogous amidate complex containing a single sterically hindered monodentate ligand and a kappa2-bound amidate ligand does not undergo reductive elimination. This trend of faster reductive elimination from complexes containing bidentate ancillary ligands than from a complex with a single monodentate ancillary ligand is unusual and is consistent with an effect of the denticity of the ancillary ligand on the binding mode of the amidate. Complexes of sulfonamidate ligands underwent reductive elimination faster than complexes of acetamidates, and reductive elimination occurred from complexes containing both bidentate and monodentate ancillary ligands. Like reductive elimination from the acetamidate complexes, reductive eliminations from the sulfonamidate complexes were faster when the complexes possessed bidentate Xantphos and kappa1-sulfonamidate ligands.

Amides↗
PubMed2006

Molecular recognition in the selective oxygenation of saturated C-H bonds by a dimanganese catalyst.

Although enzymes often incorporate molecular recognition elements to orient substrates selectively, such strategies are rarely achieved by synthetic catalysts. We combined molecular recognition through hydrogen bonding with C-H activation to obtain high-turnover catalytic regioselective functionalization of sp3 C-H bonds remote from the -COOH recognition group. The catalyst contains a Mn(mu-O)2Mn reactive center and a ligand based on Kemp's triacid that directs a -COOH group to anchor the carboxylic acid group of the substrate and thus modify the usual selectivity for oxidation. Control experiments supported the role of hydrogen bonding in orienting the substrate to achieve high selectivity.

Binding Sites↗
PubMed2006

Toward exceeding the Shockley-Queisser limit: photoinduced interfacial charge transfer processes that store energy in excess of the equilibrated excited state.

Nanocrystalline (anatase), mesoporous TiO2 thin films were functionalized with [Ru(bpy)2(deebq)](PF6)2, [Ru(bq)2(deeb)](PF6)2, [Ru(deebq)2(bpy)](PF6)2, [Ru(bpy)(deebq)(NCS)2], or [Os(bpy)2(deebq)](PF6)2, where bpy is 2,2'-bipyridine, bq is 2,2'-biquinoline, and deeb and deebq are 4,4'-diethylester derivatives. These compounds bind to the nanocrystalline TiO2 films in their carboxylate forms with limiting surface coverages of 8 (+/- 2) x 10(-8) mol/cm2. Electrochemical measurements show that the first reduction of these compounds (-0.70 V vs SCE) occurs prior to TiO2 reduction. Steady state illumination in the presence of the sacrificial electron donor triethylamine leads to the appearance of the reduced sensitizer. The thermally equilibrated metal-to-ligand charge-transfer excited state and the reduced form of these compounds do not inject electrons into TiO2. Nanosecond transient absorption measurements demonstrate the formation of an extremely long-lived charge separated state based on equal concentrations of the reduced and oxidized compounds. The results are consistent with a mechanism of ultrafast excited-state injection into TiO2 followed by interfacial electron transfer to a ground-state compound. The quantum yield for this process was found to increase with excitation energy, a behavior attributed to stronger overlap between the excited sensitizer and the semiconductor acceptor states. For example, the quantum yields for [Os(bpy)2(dcbq)]/TiO2 were phi(417 nm) = 0.18 +/- 0.02, phi(532.5 nm) = 0.08 +/- 0.02, and phi(683 nm) = 0.05 +/- 0.01. Electron transfer to yield ground-state products occurs by lateral intermolecular charge transfer. The driving force for charge recombination was in excess of that stored in the photoluminescent excited state. Chronoabsorption measurements indicate that ligand-based intermolecular electron transfer was an order of magnitude faster than metal-centered intermolecular hole transfer. Charge recombination was quantified with the Kohlrausch-Williams-Watts model.

Journal Article↗
PubMed2006

Direct observation of beta-aryl eliminations from Rh(I) alkoxides.

beta-Aryl eliminations from a series of rhodium(I) alkoxides to form rhodium aryl complexes and free ketones are reported. Tertiary phenylmethoxide complexes [Rh(PEt3)n(OCPhRR')] (n = 2, 3) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2} by the corresponding alcohols HOCPhRR' in the presence and absence of added PEt3. Heating of these complexes in the presence of added PEt3 generated the rhodium phenyl complex, (PEt3)3RhPh, and the corresponding ketones in good to high yields. Kinetic results are most consistent with irreversible beta-phenyl elimination from a bisphosphine-ligated rhodium alkoxide complex. Such bisphosphine complexes result from ligand dissociation from the trisphosphine complexes and have been isolated in some cases. The bisphosphine complexes are stabilized by Rh-Cphenyl interactions, as evidenced by an X-ray structure, and this structure with a metal-aryl interaction likely illustrates the pathway for C-C bond cleavage.

Journal Article↗
PubMed2006

Aqueous spectroscopy and redox properties of carboxylate-bound titanium.

The aqueous chemistry of Ti(III) and Ti(IV) in two different chemical environments is investigated given its relevance to environmental, materials, and biological chemistry. Complexes of titanium with the carboxylate ligands citrate and oxalate, found ubiquitously in Nature, were synthesized. The redox properties were studied by using cyclic voltammetry. All the titanium citrate redox couples are quasi-reversible. Electrospray mass spectrometry of the Ti(III) citrate solution shows the presence of a 1:2 Ti/cit complex in solution, in contrast to the predominant 1:3 Ti/cit complex with Ti(IV). The change in the coordination of the ligand to the metal on reduction may explain the quasi-reversible behavior of the electrochemistry. The redox potentials for Ti(IV) citrate in water vary with pH. At pH 7, the approximate E(1/2) is less than -800 mV. This stated change in redox properties is considered in light of the previously reported Ti(IV) citrate solution speciation. Analogous speciation behavior is suggested from the EPR spectroscopy of Ti(III) citrate aqueous solutions. The g tensors are deduced for several pH-dependent species from the simulated data. The X-ray crystal structure of a Ti(III)(2) oxalate dimer Ti(2)(mu-C(2)O(4))(C(2)O(4))(2)(H(2)O)(6).2H(2)O (3), which crystallizes from water below pH 2, is reported. Complex 3 crystallizes in a monoclinic P2(1)/c space group with a = 9.5088(19) Angstroms, b = 6.2382(12) Angstroms, c = 13.494(3) Angstroms, V = 797.8(3) Angstroms(3), and Z = 2. The infrared spectroscopy, EPR spectroscopy, and cyclic voltammetry on complex 3 are reported. The cyclic voltammetry shows an irreversible redox couple approximately -196 mV which likely corresponds to the Ti(IV)(2)/Ti(III)Ti(IV) couple. The EPR spectroscopy on solid complex 3 shows a typical S = 1 triplet-state spectrum. The solid follows non-Curie behavior, and the antiferromagnetic coupling between the two metal centers is determined to be -37.2 cm(-1). However, in solution the complex follows Curie behavior and supports a Ti(III)Ti(IV) oxidation state for the dimer.

Carboxylic Acids↗
PubMed2006

A highly active palladium catalyst for intermolecular hydroamination. Factors that control reactivity and additions of functionalized anilines to dienes and vinylarenes.

We report a catalyst for intermolecular hydroamination of vinylarenes that is substantially more active for this process than catalysts published previously. With this more reactive catalyst, we demonstrate that additions of amines to vinylarenes and dienes occur in the presence of potentially reactive functional groups, such as ketones with enolizable hydrogens, free alcohols, free carboxylic acids, free amides, nitriles, and esters. The catalyst for these reactions is generated from [Pd(eta(3)-allyl)Cl](2) (with or without added AgOTf) or [Pd(CH(3)CN)(4)](BF(4))(2) and Xantphos (9,9-dimethyl-4,5-bis(diphenylphosphino)xanthene), which generates complexes with large P-Pd-P bite angles. Studies on the rate of the C-N bond-forming step that occurs by attack of amine on an eta(3)-phenethyl and an eta(3)-allyl complex were conducted to determine the effect of the bite angle on the rate of this nucleophilic attack. Studies on model eta(3)-benzyl complexes containing various bisphosphines showed that the nucleophilic attack was faster for complexes containing larger P-Pd-P bite angles. Studies of substituted unsymmetrical and unsubstituted symmetrical model eta(3)-allyl complexes showed that nucleophilic attack on complexes ligated by Xantphos was faster than on complexes bearing ligands with smaller bite angles and that nucleophilic attack on unsymmetrical allyl complexes with larger bite angle ligands was faster than on unsymmetrical allyl complexes with smaller bite angle ligands. However, monitoring of catalytic reactions of dienes by (31)P NMR spectroscopy showed that the concentration of active catalyst was the major factor that controlled rates for reactions of symmetrical dienes catalyzed by complexes of phosphines with smaller bite angles. The identity of the counterion also affected the rate of attack: reactions of allylpalladium complexes with chloride counterion occurred faster than reactions of allylpalladium complexes with triflate or tetrafluoroborate counterion. As is often observed, the dynamics of the allyl and benzyl complexes also depended on the identity of the counterion.

Alkenes↗
PubMed2006

Isothiazolopyridones: synthesis, structure, and biological activity of a new class of antibacterial agents.

We report the syntheses of first-generation derivatives of isothiazolopyridones and their in vitro evaluation as antibacterial agents. These compounds, containing a novel heterocyclic nucleus composed of an isothiazolone fused to a quinolizin-4-one (at C-2 and C-3 of the quinolizin-4-one), were prepared using a sequence of seven synthetic transformations. The solid-state structure of 7-chloro-9-ethyl-1-thia-2,4a-diazacyclopenta[b]naphthalene-3,4-dione was determined by X-ray diffraction. The prepared derivatives of desfluoroisothiazolopyridones exhibited (a) antibacterial activity against Gram-negative and Gram-positive organisms, (b) inhibitory activities against DNA gyrase and topoisomerase IV, and (c) no inhibitory activity against human topoisomerase II.

Anti-Bacterial Agents↗
PubMed2005

Tridentate copper ligand influences on heme-peroxo-copper formation and properties: reduced, superoxo, and mu-peroxo iron/copper complexes.

In cytochrome c oxidase synthetic modeling studies, we recently reported a new mu-eta2:eta2-peroxo binding mode in the heteronuclear heme/copper complex [(2L)Fe(III)-(O2(2-))-CuII]+ (6) which is effected by tridentate copper chelation (J. Am. Chem. Soc. 2004, 126, 12716). To establish fundamental coordination and O2-reactivity chemistry, we have studied and describe here (i) the structure and dioxygen reactivity of the copper-free compound (2L)FeII (1), (ii) detailed spectroscopic properties of 6 in comparisons with those of known mu-eta2:eta1 heme-peroxo-copper complexes, (iii) formation of 6 from the reactions of [(2L)FeIICuI]+ (3) and dioxygen by stopped-flow kinetics, and (iv) reactivities of 6 with CO and PPh3. In the absence of copper, 1 serves as a myoglobin model compound possessing a pyridine-bound five-coordinate iron(II)-porphyrinate which undergoes reversible dioxygen binding. Oxygenation of 3 below -60 degrees C generates the heme-peroxo-copper complex 6 with strong antiferromagnetic coupling between high-spin iron(III) and copper(II) to yield an S = 2 spin system. Stopped-flow kinetics in CH2Cl2/6% EtCN show that dioxygen reacts with iron(II) first to form a heme-superoxide moiety, [(EtCN)(2L)FeIII-(O2-)...CuI(EtCN)]+ (5), which further reacts with Cu(I) to generate 6. Compared to those properties of a known mu-eta2:eta1-heme-peroxo-copper complex, 6 has a significantly diminished resonance Raman nu(O-O) stretching frequency at 747 cm(-1) and distinctive visible absorptions at 485, 541, and 572 nm, all of which seem to be characteristics of a mu-eta2:eta2-heme-peroxo-copper system. Addition of CO or PPh3 to 6 yields a bis-CO adduct of 3 or a PPh(3) adduct of 5, the latter with a remaining FeIII-(O2-) moiety.

Copper↗
PubMed2005

Titanium(IV) citrate speciation and structure under environmentally and biologically relevant conditions.

The water-soluble complexes of Ti(IV) with citrate are of interest in environmental, biological, and materials chemistry. The aqueous solution speciation is revealed by spectropotentiometric titration. From pH 3-8, given at least three equivalents of ligand, 3:1 citrate/titanium complexes predominate in solution with successive deprotonation of dangling carboxylates as the pH increases. In this range and under these conditions, hydroxo- or oxo-metal species are not supported by the data. At ligand/metal ratios between 1:1 and 3:1, the data are difficult to fit, and are consistent with the formation of such hydroxo- or oxo- species. Stability constants for observed species are tabulated, featuring log beta-values of 9.18 for the 1:1 complex [Ti(Hcit)](+), and 16.99, 20.41, 16.11, and 4.07 for the 3:1 complexes [Ti(H(2)cit)(3)](2-), [Ti(H(2)cit)(Hcit)(2)](4-), [Ti(Hcit)(2)(cit)](6-), and [Ti(cit)(3)](8-), respectively (citric acid = H(4)cit). Optical spectra for the species are reported. The complexes exhibit similar yet distinct spectra, featuring putative citrate-to-Ti(IV) charge-transfer absorptions (lambda(max) approximately 250-310 nm with epsilon approximately 5000-7000 M(-)(1) cm(-1)). The prevailing 3:1 citrate/titanium ratio in solution is supported by electrospray mass spectrometry data. The X-ray crystal structure of a fully deprotonated tris-citrate complex Na(8)[Ti(C(6)H(4)O(7))(3)].17H(2)O (1) (or Na(8)[Ti(cit)(3)].17H(2)O) that crystallizes from aqueous solution at pH 7-8 is reported. Compound 1 crystallizes in the triclinic space group P, with a = 11.634(2) Angstroms, b = 13.223(3) Angstroms, c = 13.291(3) Angstroms, V = 1982.9(7) Angstroms(3), and Z = 2.

Citrates↗
PubMed2005

Binding cooperativity of two different Lewis acid groups at the edge of ferrocene.

The binding properties of heteronuclear bidentate Lewis acids, in which an organoboron and an organotin moiety are attached adjacent to each other at one of the Cp rings of ferrocene, have been studied. Treatment of [1,2-fc(SnMe2Cl)(BClMe)] (1-Cl) (fc = ferrocenediyl) with one equivalent of pyridine or 4-dimethylaminopyridine (DMAP) resulted in diastereoselective complexation of boron. Adducts 2 and 3 have been studied by multinuclear NMR, and the stereoselectivity of complexation was further confirmed by single crystal X-ray diffraction of 2. The importance of cooperative effects that involve an intramolecular B-ClSn interaction on the diastereoselectivity is evident from comparison with binding studies on the phenyl-substituted analogue [1,2-fc(SnMe2Cl)(BPhMe)] (1-Ph). Complexation of 1-Ph led to diastereomeric mixtures of adducts 4 and 5, respectively, which were identified by multinuclear NMR including NOESY experiments. The solid-state structure of one of the diastereomers of 5 was confirmed by X-ray crystallography. Facile isomerization was found in solution and the barrier of activation was determined by VT NMR studies (4: Delta(#)(298) = 54.9+/-0.4 kJ mol(-1); 5: Delta(#)(298) = 70.3+/-0.1 kJ mol(-1)). Competitive binding of pyridine to 1-Cl and [FcB(Cl)Me] (Fc = ferrocenyl) showed that cooperative effects between tin and boron lead to significant Lewis acidity enhancement. Binding of a second nucleophile in the presence of excess of base occurred also at boron. The novel zwitterionic complexes [1,2-fc(BMe(py)2)(SnMe2Cl2)] (6) and [1,2-fc(BMe(dmap)(2))(SnMe(2)Cl2)] (7) formed, which consist of boronium cation and stannate anion moieties. The structure of 7 in the solid-state was confirmed by X-ray crystallography. Multinuclear NMR data and competition experiments indicate weak binding of chloride to tin in 7 and partial dissociation in solution.

Journal Article↗
PubMed2005

Rhodium boryl complexes in the catalytic, terminal functionalization of alkanes.

A series of studies have been conducted by experimental and theoretical methods on the synthesis, structures, and reactions of CpRh boryl complexes that are likely intermediates in the rhodium-catalyzed regioselective, terminal functionalization of alkanes. The photochemical reaction of CpRh(eta(6)-C(6)Me(6)) with pinacolborane (HBpin) generates the bisboryl complex CpRh(H)(2)(Bpin)(2) (2), which reacts with neat HBpin to generate CpRh(H)(Bpin)(3) (3). X-ray diffraction, density functional theory (DFT) calculations, and NMR spectroscopy suggest a weak, but measurable, B-H bonding interaction. Both 2 and 3 dissociate HBpin and coordinate PEt(3) or P(p-Tol)(3) to generate the conventional rhodium(III) species CpRh(PEt(3))(H)(Bpin) (4) and CpRh[P(p-tol)(3)](Bpin)(2) (5). Compounds 2 and 3 also react with alkanes and arenes to form alkyl- and arylboronate esters at temperatures similar to or below those of the catalytic borylation of alkanes and arenes. Further, these compounds were observed directly in catalytic reactions. The enthalpies and free energies for generation of the 16-electron intermediate and for the C-H bond cleavage and B-C bond formation have been calculated with DFT. These results strongly suggest that the C-H bond cleavage process occurs by a metal-assisted sigma-bond metathesis mechanism to generate a borane complex that isomerizes if necessary to place the alkyl group cis to the boryl group. This complex with cis boryl and alkyl groups then undergoes B-C bond formation by a second sigma-bond metathesis to generate the final functionalized product.

Journal Article↗
PubMed2004

Heme-copper/dioxygen adduct formation relevant to cytochrome c oxidase: spectroscopic characterization of [(6L)FeIII-(O2(2-))-CuII]+.

In the further development and understanding of heme-copper dioxygen reactivity relevant to cytochrome c oxidase O(2)-reduction chemistry, we describe a high-spin, five-coordinate dioxygen (peroxo) adduct of an iron(II)-copper(I) complex, [((6)L)Fe(II)Cu(I)](BArF(20)) (1), where (6)L is a tetraarylporphyrinate with a tethered tris(2-pyridylmethyl)amine chelate for copper. Reaction of 1 with O(2) in MeCN affords a remarkably stable [t(1/2) (rt; MeCN) approximately 60 min] adduct, [((6)L)Fe(III)-(O(2) (2-))-Cu(II)](+) (2) [EPR silent; lambda(max)=418 (Soret), 561 nm], formulated as a peroxo complex based on manometry (1:O(2)=1:1; spectrophotometric titration, -40 degrees C, MeCN), mass spectrometry {MALDI-TOF-MS: (16)O(2), m/z 1191 ([((6)L)Fe(III)-((16)O(2) (2-))-Cu(II)](+)); (18)O(2), m/z 1195}, and resonance Raman spectroscopy (nu((O-O))=788 cm(-1); Delta(16)O(2)/(18)O(2)=44 cm(-1); Delta(16)O(2)/(16/18)O(2)=22 cm(-1)). (1)H and (2)H NMR spectroscopy (-40 degrees C, MeCN) reveals that 2 is the first heme-copper peroxo complex which is high-spin, with downfield-shifted pyrrole resonances (delta(pyrrole)=75 ppm, s, br) and upfield shifted peaks at delta= -22, -35, and -40 ppm, similar to the pattern observed for the mu-oxo complex [((6)L)Fe(III)-O-Cu(II)](BAr(F)) (3) (known S=2 system, antiferromagnetically coupled high-spin Fe(III) and Cu(II)). The corresponding magnetic moment measurement (Evans method, CD(3)CN, -40 degrees C) also confirms the S=2 spin state, with mu(B)=4.9. Structural insights were obtained from X-ray absorption spectroscopy, showing Fe-O (1.83 A) and Cu-O (1.882 A) bonds, and an Fe...Cu distance of 3.35(2) A, suggestive of a mu-1,2-peroxo ligand present in 2. The reaction of 2 with cobaltocene gives 3, differing from the observed full reduction seen with other heme-Cu peroxo complexes. Finally, thermal decomposition of 2 yields 3, with concomitant release of 0.5 mol O(2) per mol 2, as confirmed quantitatively by an alkaline pyrogallol dioxygen scavenging solution.

Binding Sites↗
PubMed2004

New family of lithium salts for highly conductive nonaqueous electrolytes.

New lithium salts of weakly coordinating anions were prepared by treating lithium imidazolates or LiN(CH3)2 with 2 equiv of BF(3). They are LiIm(BF3)2, Li 2-MeIm(BF3)2, Li 4-MeIm(BF3)2, LiBenzIm(BF3)2, Li 2-iPrIm(BF3)2, and LiN(CH3)2(BF3)2 (Im=imidazolate, Me=methyl, iPr=isopropyl, BenzIm=benzoimidazolate). The salts were characterized by NMR spectroscopy and mass spectrometry. The structure of LiBenzIm(BF3)2 consists of a dimeric centrosymmetric unit with each lithium atom forming a bridge between the two anions through one fluorine contact to each anion. The structure of a hydrate of LiN(CH3)2(BF3)2 consists of an infinite chain in which each anion chelates two different lithium atoms through Li-F bonds. The conductivities of electrolyte solutions of these salts were measured and are discussed in terms of different ion-pairing modes determined from the solid-state structures, the anion's ability to distribute charge, and solution viscosity. Organic carbonate solutions of LiIm(BF3)2 partially disproportionate at 85 degrees C forming LiBF4, LiBF2[Im(BF3)]2, and Li[(BF3)ImBF2ImBF2Im(BF3)], reaching equilibrium by 3 months at 85 degrees C but not disproportionating at room temperature after 9 months. A mechanism for the formation of these disproportionation products is proposed. The lower conductivity of the 1 M LiIm(BF3)2 solution that has undergone disproportionation is attributed to the formation LiBF4, which is less conductive, and LiBF2[Im(BF3)]2 and Li[(BF3)ImBF2ImBF2Im(BF3)], which increase solution viscosity.

Journal Article↗
PubMed2004

Mononuclear, five-coordinate lanthanide amido and aryloxide complexes bearing tetradentate (N2O2) Schiff bases.

Two monomeric, five-coordinate lanthanide complexes, [bis-5,5'-(1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]samarium[2,6-bis(tert-butyl)-4-methylphenoxide] and [bis-5,5'-(1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]erbium[2,6-bis(tert-butyl)-4-methylphenoxide], were isolated from the reactions of 2,6-bis(tert-butyl)-4-methylphenol with [bis-5,5'-(1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]lanthanide[bis(trimethylsilyl)amido] (lanthanide = Er(3+) and Sm(3+)). The purified phenoxides were recovered in excellent yields and analytical purity, and the reactions proceeded cleanly without Schiff-base degradation or cluster formation. Analogously, [bis-3,3'-(1,3-propanediyldiimino)-1-phenyl-2-butene-1-onato]erbium[bis(trimethylsilyl)amido] was also directly converted to [bis-3,3'-(1,3-propanediyldiimino)-1-phenyl-2-butene-1-onato]erbium[2,6-bis(tert-butyl)-4-methylphenoxide]; however, a less sterically demanding alcohol (i.e., ethanol) yielded a neutral trinuclear oxo alkoxide species with each dianionic Schiff base asymmetrically bridging through micro-oxo interactions. In this polynuclear cluster, each symmetry-related, seven-coordinate erbium(III) ion exhibits monocapped trigonal prismatic geometry, which assembles by sharing triangular capped faces. Single-crystal X-ray diffraction revealed square-pyramidal metal coordination in each five-coordinate lanthanide ion with varied S(4) ruffling of the "square base" donor atoms and the six-membered propylene diamine chelate ring adopting the boat conformation. To contrast the effect of subtle ligand changes, we also report the synthesis and characterization of [bis-5,5'-(2,2-dimethyl-1,3-propanediyldiimino)-2,2-dimethyl-4-hexene-3-onato]samarium[bis(trimethylsilyl)amido], having gem-dimethyl substituents appended to the propylene bridge central carbon. The six-membered diamine chelate ring in this compound adopts the chair conformation without metal-hydrocarbon interaction. Also presented are qualitative activity observations and polymerization data for the polymerization of rac-lactide and epsilon-caprolactone using the five-coordinate lanthanide amidos and phenoxides.

Allyl Compounds↗