Biomedical subjects

Chuan-Jian Zhong

Publications and source records attributed to Chuan-Jian Zhong.

16 recordsLinked to original sources

PubMed2007

Homocysteine-mediated reactivity and assembly of gold nanoparticles.

This paper reports the findings of an investigation of the reactivity and assembly of gold nanoparticles mediated by homocysteine (Hcys), a thiol-containing amino acid found in plasma. The aim is to gain insight into the interparticle interaction and reactivity, which has potential application for the detection of thiol-containing amino acids. By monitoring the evolution of the surface plasmon resonance absorption and the dynamic light scattering of gold nanoparticles in the presence of Hcys, the assembly was shown to be dependent on the nature and concentration of the electrolytes, reflecting an effective screening of the diffuse layer around the initial citrate-capped nanoparticles that decreases the barrier to the Hcys adsorption onto the surface, and around the subsequent Hcys-capped nanoparticles that facilitate the zwitterion-type electrostatic interactions between amino acid groups of Hcys bound to different nanoparticles. A key element of the finding is that the interparticle zwitterion interaction of the Hcys-Au system is much stronger than the expectation for a simple Hcys or Au solution, a new phenomenon originating from the unique nanoscale interparticle interaction. The strength and reversibility of the interparticle zwitterion-type electrostatic interactions between amino acid groups are evidenced by the slow disassembly upon increasing pH at ambient temperatures and its acceleration at elevated temperature. These findings provide new insight into the precise control of interfacial interactions and reactivities between amino acids anchored to nanoparticles and have broad implications in the development of colorimetric nanoprobes for amino acids.

Chemistry, Physical↗

PubMed2006

Formation of gold nanoparticles catalyzed by platinum nanoparticles: assessment of the catalytic mechanism.

The understanding of how the formation of metal nanoparticles in aqueous solutions is influenced by the presence of presynthesized nanoparticles is important for precise control over size, shape, and composition of nanoparticles. New insights into the catalytic mechanism of Pt nanoparticles are gained by studying the formation of gold nanoparticles from the reduction of AuCl(4)(-) in aqueous solution in the presence of presynthesized Pt nanoparticles as a model system. The measurement of changes of the surface plasmon resonance band of gold nanoparticles, along with TEM analysis of particle size and morphology, provided an important means for assessing the reaction kinetics. The reductive mediation of Pt-H species on the Pt nanocrystal surface is believed to play an important role in the Pt-catalyzed formation of gold nanoparticles. This important physical insight is evidenced by comparison of the rates of the Pt-catalyzed formation of gold nanoparticles in the presence and in the absence of hydrogen (H(2)), which adsorb dissociatively on a Pt nanocrystal surface forming Pt-H species. Pt-H effectively mediates the reduction of AuCl(4)(-) toward the formation of gold nanoparticles. Implications of the findings to the controllability over size, composition, and morphology of metal nanoparticles in the aqueous synthesis environment are also discussed.

Journal Article↗

PubMed2006

Adsorption of cyanine dyes on gold nanoparticles and formation of J-aggregates in the nanoparticle assembly.

This paper describes the results of an investigation of the interparticle interactions and reactivities in the assembly of gold nanoparticles mediated by cyanine dyes. The combination of the positively charged indolenine cyanine dyes and the negatively charged gold nanoparticles is shown to form a J-aggregate bridged assembly of nanoparticles, in addition to hydrophobic interparticle and electrostatic dye-particle interactions. Such interparticle interactions and reactivities are studied by probing the absorption of J-aggregates and fluorescence from the dyes and the surface plasmon resonance absorption from the nanoparticles. The J-aggregation of the dyes adsorbed on the nanoparticles is shown to play an important role in the assembly of nanoparticles. The spectral evolution of the J-band of the dyes and the surface plasmon resonance band of the nanoparticles was found to be sensitive to the nature of the charge and the structure of the dyes. The fluorescence quenching for the dyes was shown to be quantitatively related to the surface coverage of the dyes on the nanocrystal surfaces. These findings have provided important information for assessing a two-step process involving a rapid adsorption of the dyes on the nanoparticles and a subsequent assembly of the nanoparticles involving a combination of interparticle J-aggregation and hydrophobic interactions of the adsorbed dyes. The results are discussed in terms of the structural effects of the dyes, and the interparticle molecular interactions and reactivities, which provide important physical and chemical insights into the design of dye-nanoparticle structured functional nanomaterials.

Adsorption↗

PubMed2006

Characterization of carbon-supported AuPt nanoparticles for electrocatalytic methanol oxidation reaction.

In view of the recent finding that the bimetallic AuPt nanoparticles prepared by molecular-capping-based colloidal synthesis and subsequent assembly on carbon black support and thermal activation treatment exhibit alloy properties, which is in sharp contrast to the bimetallic miscibility gap known for the bulk counterparts in a wide composition range, there is a clear need to assess the electrocatalytic properties of the catalysts prepared with different bimetallic composition and different thermal treatment temperatures. This paper reports recent results of such an investigation of the electrocatalytic methanol oxidation reaction (MOR) activities of the carbon-supported AuPt nanoparticle catalysts with different bimetallic composition and thermal treatment temperatures. Au(m)Pt(100)(-)(m) nanoparticles of 2-3 nm core sizes with different atomic compositions ranging from 10% to 90% Au (m = 10 approximately 90) have been synthesized by controlling the feeding of the metal precursors used in the synthesis. The electrocatalytic MOR activities of the carbon-supported AuPt bimetallic catalysts were characterized in alkaline electrolytes. The catalysts with 65% to 85% Au and treated at 500 degrees C were found to exhibit maximum electrocatalytic activities in the alkaline electrolytes. The findings, together with a comparison with some well-documented catalysts as well as recent experimental and theoretical modeling results, have revealed important insights into the participation of CO(ad) and OH(ad) on Au sites in the catalytic reaction of Pt in the AuPt alloys with approximately 75% Au. The insights are useful for understanding the correlation of the bifunctional electrocatalytic activity of the bimetallic nanoparticle catalysts with the bimetallic composition and the thermal treatment temperatures.

Journal Article↗

PubMed2005

Monodispersed core-shell Fe3O4@Au nanoparticles.

The ability to synthesize and assemble monodispersed core-shell nanoparticles is important for exploring the unique properties of nanoscale core, shell, or their combinations in technological applications. This paper describes findings of an investigation of the synthesis and assembly of core (Fe(3)O(4))-shell (Au) nanoparticles with high monodispersity. Fe(3)O(4) nanoparticles of selected sizes were used as seeding materials for the reduction of gold precursors to produce gold-coated Fe(3)O(4) nanoparticles (Fe(3)O(4)@Au). Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, core-shell composition, surface reactivity, and magnetic properties have confirmed the formation of the core-shell nanostructure. The interfacial reactivity of a combination of ligand-exchanging and interparticle cross-linking was exploited for molecularly mediated thin film assembly of the core-shell nanoparticles. The SQUID data reveal a decrease in magnetization and blocking temperature and an increase in coercivity for Fe(3)O(4)@Au, reflecting the decreased coupling of the magnetic moments as a result of the increased interparticle spacing by both gold and capping shells. Implications of the findings to the design of interfacial reactivities via core-shell nanocomposites for magnetic, catalytic, and biological applications are also briefly discussed.

Ferric Compounds↗

PubMed2005

Kinetic and thermodynamic assessments of the mediator-template assembly of nanoparticles.

The understanding of kinetic and thermodynamic factors governing the assembly of nanoparticles is important for the design and control of functional nanostructures. This paper describes a study of the kinetic and thermodynamic factors governing the mediator-template assembly of gold nanoparticles into spherical assemblies in solutions. The study is based on spectrophotometric measurements of the surface plasmon (SP) resonance optical property. Gold nanoparticle cores ( approximately 5 nm) encapsulated with tetraoctylammonium bromide shells were studied as a model system. The mediator-template assembly involves a thioether-based multidentate ligand (e.g., MeSi(CH2SMe)3) which functions as a mediator, whereas the tetraoctylammonium bromide capping molecules function as template agents. On the basis of the temperature dependence of the SP optical property in the mediator-template assembly process, the kinetic and thermodynamic parameters such as the reaction rate constant and reaction enthalpy have been determined. The results led to two important findings. First, the mediator-template assembly of nanoparticles is an enthalpy-driven process. Second, the enthalpy change (-1.3 kcal/mol) is close to the magnitude of the van der Waals interaction energy for alkyl chains and the condensation energy of hydrocarbons. Implications of the findings to the understanding of the interparticle interactions have also been discussed.

Journal Article↗

PubMed2005

Platinum-catalyzed synthesis of water-soluble gold-platinum nanoparticles.

The ability to control composition and size in the synthesis of bimetallic nanoparticles is important for the exploitation of the bimetallic catalytic properties. This paper reports findings of an investigation of a new approach to the synthesis of gold-platinum (AuPt) bimetallic nanoparticles in aqueous solution via one-phase reduction of AuCl(4-) and PtCl(4)(2-) using a combination of reducing and capping agents. Hydrogen served as a reducing agent for the reduction of Pt(II), whereas acrylate was used as a reducing agent for the reduction of Au(III). The latter reaction was found to be catalyzed by the formation of Pt as a result of the reduction of Pt(II). Acrylate also functioned as capping agent on the resulting nanocrystals. By controlling the feed ratios of AuCl(4-) and PtCl(4)(2-) and the relative concentrations of acrylate, an effective route for the preparation of AuPt nanoparticles with bimetallic compositions ranging from approximately 4 to 90% Au and particle sizes ranging from 2 to 8 nm has been demonstrated. The composition, size, and shell properties were characterized using transmission electron microscopy, direct current plasma-atomic emission spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. Implications of the results to the exploration of bifunctional catalysts are also briefly discussed.

Journal Article↗

PubMed2005

Mediator-template assembly of nanoparticles.

The ability to construct size- and shape-controllable architectures using nanoparticles as building blocks is essential for the exploration of nanoparticle-structured properties. This paper reports findings of an investigation of a mediator-template strategy for the size-controllable assembly of nanoparticles. This strategy explores multidentate thioether ligands as molecular mediators and tetraalkylammonium-capped gold nanoparticles (5 nm) as templates toward the preparation of size-controllable and monodispersed spherical assemblies ( approximately 20-300-nm diameters). The combination of the mediation force of the multidentate thioether and the hydrophobic force of the tetraalkylammonium template establishes the interparticle linkage and stability. The morphological properties of the spherical assemblies have been characterized using TEM, AFM, and SAXS techniques. The finding of the soft-hard nature of the nanoparticle assemblies and their interactions with contacting substrates could form the basis of a new strategy for manipulating nanoscale linkages between nanoparticle assemblies, soldering nanoelectronics, and constructing nanosensor devices. The intriguing light scattering and optical absorption properties in response to assembly, disassembly, sizing, and interparticle spacing parameters have been characterized by dynamic light scattering and spectrophotometric measurements. The discovery of the controlled disassembly into individual nanoparticles and the size regulation by a third capping component could form the basis for applications in controlled drug delivery. The fundamental basis for the mediator-template strategy as a versatile assembly technique is further discussed in terms of experimental and theoretical correlations of the morphological and optical properties.

Journal Article↗

PubMed2004

Composition-controlled synthesis of bimetallic gold-silver nanoparticles.

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.

Gold↗

PubMed2004

A direct route toward assembly of nanoparticle-carbon nanotube composite materials.

The preparation of nanocomposite materials from carbon nanotubes (CNTs) and metal or metal oxide nanoparticles has important implications to the development of advanced catalytic and sensory materials. This paper reports findings of an investigation of the preparation of nanoparticle-coated carbon nanotube composite materials. Our approach involves molecularly mediated assembly of monolayer-capped nanoparticles on multiwalled CNTs via a combination of hydrophobic and hydrogen-bonding interactions between the capping/mediating shell and the CNT surface. The advantage of this route is that it does not require tedious surface modification of CNTs. We have demonstrated its simplicity and effectiveness for assembling alkanethiolate-capped gold nanoparticles of 2-5 nm core sizes onto CNTs with controllable coverage and spatially isolated character. The loading and distribution of the nanoparticles on CNTs depend on the relative concentrations of gold nanoparticles, CNTs, and mediating or linking agents. The composite nanomaterials can be dispersed in organic solvent, and the capping/linking shells can be removed by thermal treatment to produce controllable nanocrystals on the CNT surfaces. The nanocomposite materials are characterized using transmission electron microscopy and Fourier transform infrared spectroscopy techniques. The results will be discussed in terms of developing advanced catalytic and sensory nanomaterials.

Gold↗

PubMed2004

Spectroscopic characterizations of molecularly linked gold nanoparticle assemblies upon thermal treatment.

The understanding of surface properties of core-shell type nanoparticles is important for exploiting the unique nanostructured catalytic properties. We report herein findings of a spectroscopic investigation of the thermal treatment of such nanoparticle assemblies. We have studied assemblies of gold nanocrystals of approximately 2 nm core sizes that are capped by alkanethiolate shells and are assembled by covalent or hydrogen-bonding linkages on a substrate as a model system. The structural evolution of the nanoparticle assemblies treated at different temperatures was probed by several spectroscopic techniques, including UV-visible, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The results show that the capping/linking shell molecules can be effectively removed to produce controllable surface and optical properties. The data further revealed that the thermally induced evolution of the surface plasmon resonance property of gold nanoparticles is dependent on the chemical nature of the linker molecule. The spectral evolution is discussed in terms of changes in particle size, interparticle distance, and dielectric medium properties, which has important implications for controlled preparation and thermal processing of core-shell nanostructured metal catalysts.

Journal Article↗

PubMed2004

Formation of water-soluble iron oxide nanoparticles derived from iron storage protein.

This paper reports novel findings of an investigation of the formation of water-soluble iron oxide nanoparticles from iron-storage protein ferritin. The strategy couples thermal removal of the protein shell on a planar substrate and subsequent sonication in aqueous solution under controlled temperature. Advantages of using ferritin as a precursor include well-defined core size, core composition, water-solubility and processibility. The formation of the nanoparticles was characterized using TEM, UV-Vis and FTIR techniques. Iron oxide nanoparticles in the size range of 5-20 nm diameters were produced. In addition to thermal treatment conditions, the sonication temperature of the nanoparticles in water was found to play an important role in determining the resulting particle size. This simple and effective route has important implications to the design of composite nanoparticles for potential magnetic, catalytic, biomedical sensing and other nanotechnological applications.

Animals↗

PubMed2003

Size-controlled assembly of gold nanoparticles induced by a tridentate thioether ligand.

The ability to control the size and shape of nanoparticle assemblies is essential for the ultimate applications in sensors, catalysis, medical diagnostics, information storage, and quantum computation. This report demonstrates a novel mediator-template strategy toward this ability by exploring molecular driving forces exerted by a tridentate thioether as a mediator and tetraoctylammonium bromide as a templating agent. A combination of the ligand mediation, the surfactant templating, and their relative concentrations served as the driving forces. This combination leads to unprecedented spherical assemblies of gold nanoparticles in controllable sizes via manipulation of the relative concentrations of mediating and templating components.

Gold↗

PubMed2002

Thermal activation of molecularly-wired gold nanoparticles on a substrate as catalyst.

The ability to prepare nanostructured metal catalysts requires the ability to control size and interparticle spatial and surface access properties. In this work, we report novel findings of an atomic force microscopic investigation of a controlled thermal activation strategy of gold catalysts nanostructured via molecular wiring or linking on a substrate surface. Gold nanocrystals of approximately 2 nm diameter capped by decanethiolate and wired by 1,9-nonanedithiolate on mica substrates were studied as a model system. By manipulating the activation temperature (200-250 degrees C), the capping/wiring molecules can be removed to produce controllable particle size and interparticle spatial morphology. The electrocatalytic activity of the activated nanostructures toward methanol oxidation, which is of fundamental importance to fuel cell catalysis, has been demonstrated. The novelty of the findings is the viability of a thermal activation strategy of core-shell nanostructured catalysts based on molecularly predefined interparticle spatial properties on a substrate, which upon further investigation may form the basis for spatially controllable nanostructured catalysts.

Journal Article↗

PubMed2002

Novel spherical assembly of gold nanoparticles mediated by a tetradentate thioether.

The ability to construct three- and two-dimensional architectures via nanoscale engineering is important for emerging applications of nanotechnology in sensors, catalysis, controlled drug delivery, microelectronics, and medical diagnostics. In this paper, we report novel 3D assembly using multidentate molecular building blocks. It is demonstrated that the interparticle linking of gold nanoparticles (3.7 nm core size) by a tetradentate thioether, tetra[(methylthio)methyl]silane, leads to the formation of a spherical assembly. The spherical size (30-80 nm diameter) is dependent on reaction time and relative ratio of the building blocks. The novelty of this approach is the viability of multidentate thioethers to link nanoparticles and produce spherical assemblies that can be readily assembled and disassembled. The spherical assembly can also be partially "melted" depending on the nature of interfacial interactions between the assembly and the substrate. These unusual morphological properties in shape and surface interaction and the intriguing assembling-disassembling capabilities may form the basis of designing and fabricating novel functional nanostructures.

Gold↗

PubMed2002

Colorimetric detection of thiol-containing amino acids using gold nanoparticles.

This paper reports findings of an investigation of the unusual colorimetric change of gold nanoparticles in the presence of thiol-containing amino acids such as homocysteine, cysteine and glutathione. The colorimetric change for homocysteine exhibits a rate that is about two orders of magnitude higher than that for cysteine, and at least five orders of magnitude higher than that for glutathione. The reactivity is effectively reduced or suppressed by the coexistence of either cysteine or glutathione. It is believed that the reactivity involves encapsulation of the particles by the thiol-containing amino acids which is followed by crosslinking at the encapsulating shells. In comparison with cysteine and glutathione, homocysteine has a slower encapsulating rate but a faster crosslinking rate. Implications of the findings of the interfacial encapsulation and crosslinking reactivities of gold nanoparticles to potential nanoparticle-enhanced analytical detection of thiol-containing amino acids are also briefly discussed.

Amino Acids↗