Biomedical subjects

Clark T Hung

Publications and source records attributed to Clark T Hung.

16 recordsLinked to original sources

PubMed2004

Osteocyte viability and regulation of osteoblast function in a 3D trabecular bone explant under dynamic hydrostatic pressure.

UNLABELLED: A new trabecular bone explant model was used to examine osteocyte-osteoblast interactions under DHP loading. DHP loading enhanced osteocyte viability as well as osteoblast function measured by osteoid formation. However, live osteocytes were necessary for osteoblasts to form osteoids in response to DHP, which directly show osteoblast-osteocyte interactions in this in vitro culture. INTRODUCTION: A trabecular bone explant model was characterized and used to examine the effect of osteocyte and osteoblast interactions and dynamic hydrostatic pressure (DHP) loading on osteocyte viability and osteoblast function in long-term culture. MATERIALS AND METHODS: Trabecular bone cores obtained from metacarpals of calves were cleaned of bone marrow and trabecular surface cells and divided into six groups, (1) live cores + dynamic hydrostatic pressure (DHP), (2) live cores + sham, (3) live cores + osteoblast + DHP, (4) live cores + osteoblast + sham, (5) devitalized cores + osteoblast + DHP, and (6) devitalized cores + osteoblast + sham, with four culture durations (2, 8, 15, and 22 days; n = 4/group). Cores from groups 3-6 were seeded with osteoblasts, and cores from groups 5 and 6 were devitalized before seeding. Groups 1, 3, and 5 were subjected to daily DHP loading. Bone histomorphometry was performed to quantify osteocyte viability based on morphology and to assess osteoblast function based on osteoid surface per bone surface (Os/Bs). TUNEL staining was performed to evaluate the mode of osteocyte death under various conditions. RESULTS: A portion of osteocytes remained viable for the duration of culture. DHP loading significantly enhanced osteocyte viability up to day 8, whereas the presence of seeded osteoblasts significantly decreased osteocyte viability. Cores with live osteocytes showed higher Os/Bs compared with devitalized cores, which reached significant levels over a greater range of time-points when combined with DHP loading. DHP loading did not increase Os/Bs in the absence of live osteocytes. The percentage of apoptotic cells remained the same regardless of treatment or culture duration. CONCLUSION: Enhanced osteocyte viability with DHP suggests the necessity of mechanical stimulation for osteocyte survival in vitro. Furthermore, osteocytes play a critical role in the transmission of signals from DHP loading to modulate osteoblast function. This explant culture model may be used for mechanotransduction studies in long-term cultures.

Animals↗

PubMed2004

Roles of microtubules, cell polarity and adhesion in electric-field-mediated motility of 3T3 fibroblasts.

Direct-current electric fields mediate motility (galvanotaxis) of many cell types. In 3T3 fibroblasts, electric fields increased the proportion, speed and cathodal directionality of motile cells. Analogous to fibroblasts' spontaneous migration, we initially hypothesized that reorientation of microtubule components modulates galvanotaxis. However, cells with intact microtubules did not reorient them in the field and cells without microtubules still migrated, albeit slowly, thus disproving the hypothesis. We next proposed that, in monolayers wounded and placed in an electric field, reorientation of microtubule organizing centers and stable, detyrosinated microtubules towards the wound edge is necessary and/or sufficient for migration. This hypothesis was negated because field exposure mediated migration of unoriented, cathode-facing cells and curtailed migration of oriented, anode-facing cells. This led us to propose that ablating microtubule detyrosination would not affect galvanotaxis. Surprisingly, preventing microtubule detyrosination increased motility speed, suggesting that detyrosination inhibits galvanotaxis. Microtubules might enhance adhesion/de-adhesion remodeling during galvanotaxis; thus, electric fields might more effectively mediate motility of cells poorly or dynamically attached to substrata. Consistent with this hypothesis, incompletely spread cells migrated more rapidly than fully spread cells. Also, overexpression of PAK4, a Cdc42-activated kinase that decreases adhesion, enhanced galvanotaxis speed, whereas its lack decreased speed. Thus, electric fields mediate fibroblast migration via participation of microtubules and adhesive components, but their participation differs from that during spontaneous motility.

Animals↗

PubMed2004

Anisotropic strain-dependent material properties of bovine articular cartilage in the transitional range from tension to compression.

Articular cartilage exhibits complex mechanical properties such as anisotropy, inhomogeneity and tension-compression nonlinearity. This study proposes and demonstrates that the application of compressive loading in the presence of osmotic swelling can be used to acquire a spectrum of incremental cartilage moduli (EYi) and Poisson's ratios (upsilon ij) from tension to compression. Furthermore, the anisotropy of the tissue can be characterized in both tension and compression by conducting these experiments along three mutually perpendicular loading directions: parallel to split-line (1-direction), perpendicular to split-line (2-direction) and along the depth direction (3-direction, perpendicular to articular surface), accounting for tissue inhomogeneity between the surface and deep layers in the latter direction. Tensile moduli were found to be strain-dependent while compressive moduli were nearly constant. The peak tensile (+) Young's moduli in 0.15M NaCl were E+Y1=3.1+/-2.3, E+Y2=1.3+/-0.3, E+Y3(Surface)=0.65+/-0.29 and E+Y3(Deep)=2.1+/-1.2 MPa. The corresponding compressive (-) Young's moduli were E-Y1=0.23+/-0.07, E-Y2=0.22+/-0.07, E-Y3(Surface)=0.18+/-0.07 and E-Y3(Deep)=0.35+/-0.11 MPa. Peak tensile Poisson's ratios were upsilon+12=0.22+/-0.06, upsilon+21=0.13+/-0.07, upsilon+31(Surface)=0.10+/-0.03 and upsilon+31(Deep)=0.20+/-0.05 while compressive Poisson's ratios were upsilon-12=0.027+/-0.012, upsilon-21=0.017+/-0.07, upsilon-31(Surface)=0.034+/-0.009 and upsilon-31(Deep)=0.065+/-0.024. Similar measurements were also performed at 0.015 M and 2 M NaCl, showing strong variations with ionic strength. Results indicate that (a) a smooth transition occurs in the stress-strain and modulus-strain responses between the tensile and compressive regimes, and (b) cartilage exhibits orthotropic symmetry within the framework of tension-compression nonlinearity. The strain-softening behavior of cartilage (the initial decrease in EYi with increasing compressive strain) can be interpreted in the context of osmotic swelling and tension-compression nonlinearity.

Animals↗

PubMed2004

The correspondence between equilibrium biphasic and triphasic material properties in mixture models of articular cartilage.

Mixture models have been successfully used to describe the response of articular cartilage to various loading conditions. Mow et al. (J. Biomech. Eng. 102 (1980) 73) formulated a biphasic mixture model of articular cartilage where the collagen-proteoglycan matrix is modeled as an intrinsically incompressible porous-permeable solid matrix, and the interstitial fluid is modeled as an incompressible fluid. Lai et al. (J. Biomech. Eng. 113 (1991) 245) proposed a triphasic model of articular cartilage as an extension of their biphasic theory, where negatively charged proteoglycans are modeled to be fixed to the solid matrix, and monovalent ions in the interstitial fluid are modeled as additional fluid phases. Since both models co-exist in the cartilage literature, it is useful to show how the measured properties of articular cartilage (the confined and unconfined compressive and tensile moduli, the compressive and tensile Poisson's ratios, and the shear modulus) relate to both theories. In this study, closed-form expressions are presented that relate biphasic and triphasic material properties in tension, compression and shear. These expressions are then compared to experimental findings in the literature to provide greater insight into the measured properties of articular cartilage as a function of bathing solutions salt concentrations and proteoglycan fixed-charge density.

Animals↗

PubMed2004

A paradigm for functional tissue engineering of articular cartilage via applied physiologic deformational loading.

Deformational loading represents a primary component of the chondrocyte physical environment in vivo. This review summarizes our experience with physiologic deformational loading of chondrocyte-seeded agarose hydrogels to promote development of cartilage constructs having mechanical properties matching that of the parent calf tissue, which has a Young's modulus E(Y) = 277 kPa and unconfined dynamic modulus at 1 Hz G* = 7 MPa. Over an 8-week culture period, cartilage-like properties have been achieved for 60 x 10(6) cells/ml seeding density agarose constructs, with E(Y) = 186 kPa, G* = 1.64 MPa. For these constructs, the GAG content reached 1.74% ww and collagen content 2.64% ww compared to 2.4% ww and 21.5% ww for the parent tissue, respectively. Issues regarding the deformational loading protocol, cell-seeding density, nutrient supply, growth factor addition, and construct mechanical characterization are discussed. In anticipation of cartilage repair studies, we also describe early efforts to engineer cylindrical and anatomically shaped bilayered constructs of agarose hydrogel and bone (i.e., osteochondral constructs). The presence of a bony substrate may facilitate integration upon implantation. These efforts will provide an underlying framework from which a functional tissue-engineering approach, as described by Butler and coworkers (2000), may be applied to general cell-scaffold systems adopted for cartilage tissue engineering.

Algorithms↗

PubMed2004

Role of cell-associated matrix in the development of free-swelling and dynamically loaded chondrocyte-seeded agarose gels.

Chondrocytes embedded in agarose and subjected to dynamic deformational loading produce a functional matrix with time in culture, but there is usually a delay in the development of significant differences compared to free swelling. In this study, we hypothesized that the initial presence of a cell-associated matrix would expedite construct development in response to dynamic deformational loading. Seeded samples with enzymatically isolated chondrocytes and chondrons (the chondrocyte and its pericellular matrix) and examined the effects of seeding density and dynamic loading on the development of tissue properties. At 60 million/ml, dynamic loading significantly augmented the development of material properties in chondrocyte- and chondron-seeded constructs. Biochemical content and histological analysis indicated that the deposition of GAG, link protein and collagens are affected by the pre-existing cell-associated matrix of the chondron-seeded samples. The pericellular matrix associated with the chondrons did not expedite the development of material properties in response to deformational loading, disproving our hypothesis. The relative concentration and distribution of matrix proteins may play a major role in the disparate responses observed for the chondrocyte- and chondron-seeded cultures. In further support of these findings, culturing chondrocytes in agarose for two weeks prior to the application of deformational loading also did not exhibit expedited construct development.

Adaptation, Physiological↗

PubMed2004

Functional tissue engineering of chondral and osteochondral constructs.

Due to the prevalence of osteoarthritis (OA) and damage to articular cartilage, coupled with the poor intrinsic healing capacity of this avascular connective tissue, there is a great demand for an articular cartilage substitute. As the bearing material of diarthrodial joints, articular cartilage has remarkable functional properties that have been difficult to reproduce in tissue-engineered constructs. We have previously demonstrated that by using a functional tissue engineering approach that incorporates mechanical loading into the long-term culture environment, one can enhance the development of mechanical properties in chondrocyte-seeded agarose constructs. As these gel constructs begin to achieve material properties similar to that of the native tissue, however, new challenges arise, including integration of the construct with the underlying native bone. To address this issue, we have developed a technique for producing gel constructs integrated into an underlying bony substrate. These osteochondral constructs develop cartilage-like extracellular matrix and material properties over time in free swelling culture. In this study, as a preliminary to loading such osteochondral constructs, finite element modeling (FEM) was used to predict the spatial and temporal stress, strain, and fluid flow fields within constructs subjected to dynamic deformational loading. The results of these models suggest that while chondral ("gel alone") constructs see a largely homogenous field of mechanical signals, osteochondral ("gel bone") constructs see a largely inhomogeneous distribution of mechanical signals. Such inhomogeneity in the mechanical environment may aid in the development of inhomogeneity in the engineered osteochondral constructs. Together with experimental observations, we anticipate that such modeling efforts will provide direction for our efforts aimed at the optimization of applied physical forces for the functional tissue engineering of an osteochondral articular cartilage substitute.

Biocompatible Materials↗

PubMed2003

Optical determination of anisotropic material properties of bovine articular cartilage in compression.

The precise nature of the material symmetry of articular cartilage in compression remains to be elucidated. The primary objective of this study was to determine the equilibrium compressive Young's moduli and Poisson's ratios of bovine cartilage along multiple directions (parallel and perpendicular to the split line direction, and normal to the articular surface) by loading small cubic specimens (0.9 x 0.9 x 0.8 mm, n =15) in unconfined compression, with the expectation that the material symmetry of cartilage could be determined more accurately with the help of a more complete set of material properties. The second objective was to investigate how the tension-compression nonlinearity of cartilage might alter the interpretation of material symmetry. Optimized digital image correlation was used to accurately determine the resultant strain fields within the specimens under loading. Experimental results demonstrated that neither the Young's moduli nor the Poisson's ratios exhibit the same values when measured along the three loading directions. The main findings of this study are that the framework of linear orthotropic elasticity (as well as higher symmetries of linear elasticity) is not suitable to describe the equilibrium response of articular cartilage nor characterize its material symmetry; a framework which accounts for the distinctly different responses of cartilage in tension and compression is more suitable for describing the equilibrium response of cartilage; within this framework, cartilage exhibits no lower than orthotropic symmetry.

Animals↗

PubMed2003

Anatomically shaped osteochondral constructs for articular cartilage repair.

Few successful treatment modalities exist for surface-wide, full-thickness lesions of articular cartilage. Functional tissue engineering offers a great potential for the clinical management of such lesions. Our long-term hypothesis is that anatomically shaped tissue constructs of entire articular layers can be engineered in vitro on a bony substrate, for subsequent implantation. To determine the feasibility, this study investigated the development of bilayered scaffolds of chondrocyte-seeded agarose on natural trabecular bone. In a series of three experiments, bovine chondrocytes were seeded in (1) cylindrical bilayered constructs of agarose and bovine trabecular bone, 0.53 cm2 in surface area and 3.2 mm thick, and were cultured for up to 6 weeks; (2) chondrocyte-seeded anatomically shaped agarose constructs reproducing the human patellar articular layer (area=11.7 cm2, mean thickness=3.4 mm), cultured for up to 6 weeks; and (3) chondrocyte-seeded anatomically shaped agarose constructs of the patella (same as above) integrated into a corresponding anatomically shaped trabecular bone substrate, cultured for up to 2 weeks. Articular layer geometry, previously acquired from human cadaver joints, was used in conjunction with computer-aided design and manufacturing technology to create these anatomically accurate molds. In all experiments, chondrocytes remained viable over the entire culture period, with the agarose maintaining its shape while remaining firmly attached to the underlying bony substrate (when present). With culture time, the constructs exhibited positive type II collagen staining as well as increased matrix elaboration (Safranin O staining for glycosaminoglycans) and material properties (Young's modulus and aggregate modulus). Despite the use of relatively large agarose constructs partially integrated with trabecular bone, no adverse diffusion limitation effects were observed. Anatomically shaped constructs on a bony substrate may represent a new paradigm in the design of a functional articular cartilage tissue replacement.

Animals↗

PubMed2003

Optimization of Schwann cell adhesion in response to shear stress in an in vitro model for peripheral nerve tissue engineering.

The design of nerve guidance channels (NGCs) is evolving to produce a favorable environment for neural regeneration. We created an in vitro model to evaluate the interactions between three centrally important components of this altered host environment: (1). Schwann cells, (2). substrate, and (3). sustained mechanical stimulus in the form of shear stress with laminar fluid flow. Preconfluent Schwann cells were plated on slides coated either with laminin, poly-D-lysine, type IV collagen, or fibronectin. These slides were placed into custom-designed, parallel-plate, flow chambers and were administered laminar fluid flow at a rate of 15 mL/min for 2 h. Schwann cell adhesion assays demonstrated that laminin (mean, 86.1%; SEM, 4.47%) and fibronectin (mean, 81.7%; SEM, 3.24%) were statistically superior to collagen type IV (mean, 57.7%; SEM, 3.96%) and poly-D-lysine (mean, 58.0%; SEM, 4.97%) (p < 0.001). Fibronectin (mean, 12.20%; SEM, 0.374%) induced statistically greater Schwann cell proliferation than did laminin (mean, 8.14%; SEM, 0.682%) (p < 0.001). Therefore, we recommend that fibronectin should be used as an important component of NGCs with further in vivo studies. As mechanical stress is an integral part of the host environment, our study is the first to incorporate this factor into an in vitro model for peripheral nerve tissue engineering.

Animals↗

PubMed2003

Synergistic action of growth factors and dynamic loading for articular cartilage tissue engineering.

It has previously been demonstrated that dynamic deformational loading of chondrocyte-seeded agarose hydrogels over the course of 1 month can increase construct mechanical and biochemical properties relative to free-swelling controls. The present study examines the manner in which two mediators of matrix biosynthesis, the growth factors TGF-beta1 and IGF-I, interact with applied dynamic deformational loading. Under free-swelling conditions in control medium (C), the [proteoglycan content][collagen content][equilibrium aggregate modulus] of cell-laden (10 x 10(6) cells/mL) 2% agarose constructs reached a peak of [0.54% wet weight (ww)][0.16% ww][13.4 kPa]c, whereas the addition of TGF-beta1 or IGF-I to the control medium led to significantly higher peaks of [1.18% ww][0.97% ww][23.6 kPa](C-TGF) and [1.00% ww][0.63% ww][19.3 kPa](C-IGF), respectively, by day 28 or 35 (p<0.01). Under dynamic loading in control medium (L), the measured parameters were [1.10% ww][0.52% ww][24.5 kPa]L, and with the addition of TGF-beta1 or IGF-I to the control medium these further increased to [1.49% ww][1.07% ww][50.5 kPa](L-TGF) and [1.48% ww][0.81% ww][46.2 kPa](L-IGF), respectively (p<0.05). Immunohistochemical staining revealed that type II collagen accumulated primarily in the pericellular area under free-swelling conditions, but spanned the entire tissue in dynamically loaded constructs. Applied in concert, dynamic deformational loading and TGF-beta1 or IGF-I increased the aggregate modulus of engineered constructs by 277 or 245%, respectively, an increase greater than the sum of either stimulus applied alone. These results support the hypothesis that the combination of chemical and mechanical promoters of matrix biosynthesis can optimize the growth of tissue-engineered cartilage constructs.

Animals↗

PubMed2003

Modeling of neutral solute transport in a dynamically loaded porous permeable gel: implications for articular cartilage biosynthesis and tissue engineering.

A primary mechanism of solute transport in articular cartilage is believed to occur through passive diffusion across the articular surface, but cyclical loading has been shown experimentally to enhance the transport of large solutes. The objective of this study is to examine the effect of dynamic loading within a theoretical context, and to investigate the circumstances under which convective transport induced by dynamic loading might supplement diffusive transport. The theory of incompressible mixtures was used to model the tissue (gel) as a mixture of a gel solid matrix (extracellular matrix/scaffold), and two fluid phases (interstitial fluid solvent and neutral solute), to solve the problem of solute transport through the lateral surface of a cylindrical sample loaded dynamically in unconfined compression with frictionless impermeable platens in a bathing solution containing an excess of solute. The resulting equations are governed by nondimensional parameters, the most significant of which are the ratio of the diffusive velocity of the interstitial fluid in the gel to the solute diffusivity in the gel (Rg), the ratio of actual to ideal solute diffusive velocities inside the gel (Rd), the ratio of loading frequency to the characteristic frequency of the gel (f), and the compressive strain amplitude (epsilon 0). Results show that when Rg > 1, Rd < 1, and f > 1, dynamic loading can significantly enhance solute transport into the gel, and that this effect is enhanced as epsilon 0 increases. Based on representative material properties of cartilage and agarose gels, and diffusivities of various solutes in these gels, it is found that the ranges Rg > 1, Rd < 1, correspond to large solutes, whereas f > 1 is in the range of physiological loading frequencies. These theoretical predictions are thus in agreement with the limited experimental data available in the literature. The results of this study apply to any porous hydrated tissue or material, and it is therefore plausible to hypothesize that dynamic loading may serve to enhance solute transport in a variety of physiological processes.

Animals↗

PubMed2003

Disparate aggrecan gene expression in chondrocytes subjected to hypotonic and hypertonic loading in 2D and 3D culture.

The effects of hypotonic (180 mOsm) and hypertonic (580 mOsm) medium loading on chondrocyte aggrecan gene expression in 2D monolayer and 3D hydrogel culture (agarose or alginate) were studied. Aggrecan promoter activity was monitored using a luciferase reporter gene assay and transient transfection. Osmotic loading was observed to differentially affect promoter activity, with hypotonic loading generally producing at least a 40% elevation in promoter activity, except for the case of alginate where a 50% suppression was observed. Hypertonic loading produced at least a 35% decrease in activity for all cultures. Similar osmolality-induced changes to aggrecan mRNA levels were observed in monolayer cells using qPCR. Deletion of exon 1 blocked the sensitivity of monolayer cells to hypertonic but not hypotonic medium changes. Confocal microscopy measurements suggested that the degree of hypotonic swelling in cells encapsulated in 3D matrix was restricted compared to monolayer cells whereas the degree of hypertonic shrinking was similar under both culture conditions.

Aggrecans↗

PubMed2002

Influence of seeding density and dynamic deformational loading on the developing structure/function relationships of chondrocyte-seeded agarose hydrogels.

Chondrocytes cultured in agarose hydrogels develop a functional extracellular matrix. Application of dynamic strain at physiologic levels to these constructs over time can increase their mechanical properties. In this study, the effect of seeding density (20 and 60 x 10(6) cells/ml) on tissue elaboration was investigated. Higher seeding densities increased tissue properties in free-swelling culture, with constructs seeded at 20 and 60 x 10(6) cells/ml reaching maximum values over the 63 day culture period of aggregate modulus HA: 43 +/- 15 kPa, Young's modulus EY: 39 +/- 3 kPa, and glycosaminglycan content [GAG]: 0.96% +/- 0.13% wet weight; and HA: 58 +/- 12 kPa, EY: 60 +/- 5 kPa, and [GAG]: 1.49% +/- 0.26% wet weight, respectively. It was further observed that the application of daily dynamic deformational loading to constructs seeded at 20 x 10(6) cells/ml enhanced biochemical content (approximately 150%) and mechanical properties (approximately threefold) compared to free-swelling controls by day 28. However, at a concentration of 60 x 10(6) cells/ml, no difference in mechanical properties was found in loaded samples versus their free-swelling controls. Multiple regression analysis showed that the mechanical properties of the tissue constructs depend more strongly on collagen content than GAG content; a finding that is more pronounced with the application of daily dynamic deformational loading. Our findings provide evidence for initial cell seeding density and nutrient accessibility as important parameters in modulating tissue development of engineered constructs, and their ability to respond to a defined mechanical stimulus.

Animals↗

PubMed2002

An automated approach for direct measurement of two-dimensional strain distributions within articular cartilage under unconfined compression.

An automated approachfor measuring in situ two-dimensional strain fields was developed and validated for its application to cartilage mechanics. This approach combines video microscopy, optimized digital image correlation (DIC), thin-plate spline smoothing (TPSS) and generalized cross-validation (GCV) techniques to achieve the desired efficiency and accuracy. Results demonstrate that sub-pixel accuracies can be achieved for measuring tissue displacements with this methodology with a measurement uncertainty ranging from 0.25 to 0.30 pixels. The deformational gradients (from which the strains are determined) can be evaluated directly using the optimized DIC, with a measurement uncertainty of 0.017 to approximately 0.032. In actual measurements of strain in cartilage, TPSS and differentiation can be used to achieve a more accurate measurement of the gradients from the displacement data. Using this automated approach, the two-dimensional strain fields inside immature bovine carpometacarpal joint cartilage specimens under unconfined compression were characterized (n=21). The depth-dependent apparent elastic modulus and Poisson's ratio were also determined and found to be smallest at the articular surface and increasing with depth. The apparent Poisson's ratio is found to decrease with increasing compressive strain, with values as low as 0.01 observed near the articular surface at 25% compression. The variation of the apparent Poisson's ratio with depth is found to be consistent with a theoretical model of cartilage which accounts for the disparity in its tensile and compressive moduli.

Animals↗

PubMed2002

The functional environment of chondrocytes within cartilage subjected to compressive loading: a theoretical and experimental approach.

A non-invasive methodology (based on video microscopy, optimized digital image correlation and thin plate spline smoothing technique) has been developed to determine the intrinsic tissue stiffness (H(a)) and the intrinsic fixed charge density (c(0)(F)) distribution for hydrated soft tissues such as articular cartilage. Using this technique, the depth-dependent inhomogeneous parameters H(a)(z) and c(0)(F)(z) were determined for young bovine cartilage and incorporated into a triphasic mixture model. This model was then used to predict the mechanical and electrochemical events (stress, strain, fluid/osmotic pressure, and electrical potentials) inside the tissue specimen under a confined compression stress relaxation test. The integration of experimental measurements with theoretical analyses can help to understand the unique material behaviors of articular cartilage. Coupled with biological assays of cell-scale biosynthesis, there is also a great potential in the future to study chondrocyte mechanotransduction in situ with a new level of specificity.

Animals↗