PubMed Health⌕ Search

Biomedical subjects

Claudia Veigel

Publications and source records attributed to Claudia Veigel.

11 recordsLinked to original sources
PubMed2005

Walking with myosin V.

The cytoplasm of cells is teaming with vesicles and other cargo that are moving along tracks of microtubules or actin filaments, powered by myosins, kinesins and dyneins. Myosin V has been implicated in several types of intracellular transport. The mechanism by which myosin V moves processively along actin filaments has been the subject of many biophysical and biochemical studies and a consensus is starting to emerge about how this minute molecular motor operates.

Actin Cytoskeleton↗
PubMed2005

Load-dependent kinetics of myosin-V can explain its high processivity.

Recent studies provide strong evidence that single myosin class V molecules transport vesicles and organelles processively along F-actin, taking several 36-nm steps, 'hand over hand', for each diffusional encounter. The mechanisms regulating myosin-V's processivity remain unknown. Here, we have used an optical-tweezers-based transducer to measure the effect of load on the mechanical interactions between rabbit skeletal F-actin and a single head of mouse brain myosin-V, which produces its working stroke in two phases. We found that the lifetimes of the first phase of the working stroke changed exponentially and about 10-fold over a range of pushing and pulling forces of +/- 1.5 pN. Stiffness measurements suggest that intramolecular forces could approach 3.6 pN when both heads are bound to F-actin, in which case extrapolation would predict the detachment kinetics of the front head to slow down 50-fold and the kinetics of the rear head to accelerate respectively. This synchronizing effect on the chemo-mechanical cycles of the heads increases the probability of the trail head detaching first and causes a strong increase in the number of forward steps per diffusional encounter over a system with no strain dependence.

Actins↗
PubMed2005

Malaria parasite actin filaments are very short.

A novel form of actomyosin regulation has recently been proposed in which the polymerisation of new actin filaments regulates apicomplexan parasite motility. Here, we identified actin I in the merozoites of Plasmodium falciparum by mass spectrometry. The only post-translational modification is acetylation of the N terminus (acetyl-Gly-Glu-actin), while methylation of histidine 73, a common modification for actin, is absent. Results obtained with anti-actin antibodies suggest that, in contrast to a previous report, there is no actin-ubiquitin conjugate in merozoites. About half of the extracted monomeric actin polymerised and actin filaments could be sedimented at 500,000g. In contrast, centrifugation at 100,000g, conditions commonly used to sediment filamentous actin, yielded very little F-actin. In a functional characterisation using an in vitro motility assay, actin filaments moved over myosin at a velocity indistinguishable from that of rabbit skeletal actin. Filament length, however, was too short to be resolved by conventional fluorescence microscopy. On electron micrographs an average filament length of approximately 100nm was determined. We also identified by mass spectrometry proteins co-purifying with filamentous actin, which are potential actin-binding proteins. Our results demonstrate differences in actin filament dynamics for an apicomplexan parasite, which could be due to specific properties of the actin and/or actin-regulatory proteins.

Actin Cytoskeleton↗
PubMed2004

Myosin VI: cellular functions and motor properties.

Myosin VI has been localized in membrane ruffles at the leading edge of cells, at the trans-Golgi network compartment of the Golgi complex and in clathrin-coated pits or vesicles, indicating that it functions in a wide variety of intracellular processes. Myosin VI moves along actin filaments towards their minus end, which is the opposite direction to all of the other myosins so far studied (to our knowledge), and is therefore thought to have unique properties and functions. To investigate the cellular roles of myosin VI, we identified various myosin VI binding partners and are currently characterizing their interactions within the cell. As an alternative approach, we have expressed and purified full-length myosin VI and studied its in vitro properties. Previous studies assumed that myosin VI was a dimer, but our biochemical, biophysical and electron microscopic studies reveal that myosin VI can exist as a stable monomer. We observed, using an optical tweezers force transducer, that monomeric myosin VI is a non-processive motor which, despite a relatively short lever arm, generates a large working stroke of 18 nm. Whether monomer and/or dimer forms of myosin VI exist in cells and their possible functions will be discussed.

Actins↗
PubMed2004

A monomeric myosin VI with a large working stroke.

Myosin VI is involved in a wide variety of intracellular processes such as endocytosis, secretion and cell migration. Unlike almost all other myosins so far studied, it moves towards the minus end of actin filaments and is therefore likely to have unique cellular properties. However, its mechanism of force production and movement is not understood. Under our experimental conditions, both expressed full-length and native myosin VI are monomeric. Electron microscopy using negative staining revealed that the addition of ATP induces a large conformational change in the neck/tail region of the expressed molecule. Using an optical tweezers-based force transducer we found that expressed myosin VI is nonprocessive and produces a large working stroke of 18 nm. Since the neck region of myosin VI is short (it contains only a single IQ motif), it is difficult to reconcile the 18 nm working stroke with the classical 'lever arm mechanism', unless other structures in the molecule contribute to the effective lever. A possible model to explain the large working stroke of myosin VI is presented.

Actins↗
PubMed2003

Load-dependent kinetics of force production by smooth muscle myosin measured with optical tweezers.

Muscle contraction is driven by the cyclical interaction of myosin with actin, coupled with ATP hydrolysis. Myosin attaches to actin, forming a crossbridge that produces force and movement as it tilts or rocks into subsequent bound states before finally detaching. It has been hypothesized that the kinetics of one or more of these mechanical transitions are dependent on load, allowing muscle to shorten quickly under low load, but to sustain tension economically, with slowly cycling crossbridges under high load conditions. The idea that muscle biochemistry depends on mechanical output is termed the 'Fenn effect'. However, the molecular details of how load affects the kinetics of a single crossbridge are unknown. Here, we describe a new technique based on optical tweezers to rapidly apply force to a single smooth muscle myosin crossbridge. The crossbridge produced movement in two phases that contribute 4 nm + 2 nm of displacement. Duration of the first phase depended in an exponential manner on the amplitude of applied load. Duration of the second phase was much less affected by load, but was significantly shorter at high ATP concentration. The effect of load on the lifetime of the bound crossbridge is to prolong binding when load is high, but to accelerate release when load is low or negative.

Adenosine Triphosphate↗
PubMed2003

Molecular evolutionary convergence of the flight muscle protein arthrin in Diptera and hemiptera.

Uniquely, the asynchronous flight muscle myofibrils of many insects contain arthrin, a stable 1:1 conjugate between actin and ubiquitin. The function of arthrin is still unknown. Here we survey for the presence of arthrin in 63 species of insect across nine orders using Western blotting. Analysis of the evolutionary distribution shows that arthrin has evolved a limited number of times but at least once in the Diptera and once in the Hemiptera. However, the presence of arthrin does not correlate with any observed common features of flight mechanism, natural history, or morphology. We also identify the site of the isopeptide bond in arthrin from Drosophila melanogaster (Diptera) and Lethocerus griseus (Hemiptera) using mass spectrometry. In both species, the isopeptide bond is formed between lysine 118 of the actin and the C-terminal glycine 76 of ubiquitin. Thus, not only the ubiquitination of actin but also the site of the isopeptide bond has evolved convergently in Diptera and Hemiptera. In terms of the actin monomer, lysine 118 is near neither the binding sites of the major actin-binding proteins, myosin, tropomyosin, or the troponins, nor the actin polymerization sites. However, molecular modeling supports the idea that ubiquitin bound to an actin in one F-actin strand might be able to interact with tropomyosin bound to the actin monomers of the other strand and thereby interfere with thin filament regulation.

Actins↗
PubMed2003

Neck length and processivity of myosin V.

Myosin V is an unconventional myosin that transports cargo such as vesicles, melanosomes, or mRNA on actin filaments. It is a two-headed myosin with an unusually long neck that has six IQ motifs complexed with calmodulin. In vitro studies have shown that myosin V moves processively on actin, taking multiple 36-nm steps that coincide with the helical repeat of actin. This allows the molecule to "walk" across the top of an actin filament, a feature necessary for moving large vesicles along an actin filament bound to the cytoskeleton. The extended neck length of the two heads is thought to be critical for taking 36-nm steps for processive movements. To test this hypothesis we have expressed myosin V heavy meromyosin-like fragments containing 6IQ motifs, as well as ones that shorten (2IQ, 4IQ) or lengthen (8IQ) the neck region or alter the spacing between 3rd and 4th IQ motifs. The step size was proportional to neck length for the 2IQ, 4IQ, 6IQ, and 8IQ molecules, but the molecule with the altered spacing took shorter than expected steps. Total internal reflection fluorescence microscopy was used to determine whether the heavy meromyosin IQ molecules were capable of processive movements on actin. At saturating ATP concentrations, all molecules except for the 2IQ mutant moved processively on actin. When the ATP concentration was lowered to 10 microm or less, the 2IQ mutant demonstrated some processive movements but with reduced run lengths compared with the other mutants. Its weak processivity was also confirmed by actin landing assays.

Actins↗
PubMed2002

The gated gait of the processive molecular motor, myosin V.

Class V myosins are actin-based molecular motors involved in vesicular and organellar transport. Single myosin V molecules move processively along F-actin, taking several 36-nm steps for each diffusional encounter. Here we have measured the mechanical interactions between mouse brain myosin V and rabbit skeletal F-actin. The working stroke produced by a myosin V head is approximately 25 nm, consisting of two separate mechanical phases (20 + 5 nm). We show that there are preferred myosin binding positions (target zones) every 36 nm along the actin filament, and propose that the 36-nm steps of the double-headed motor are a combination of the working stroke (25 nm) of the bound head and a biased, thermally driven diffusive movement (11 nm) of the free head onto the next target zone. The second phase of the working stroke (5 nm) acts as a gate - like an escapement in a clock, coordinating the ATPase cycles of the two myosin V heads. This mechanism increases processivity and enables a single myosin V molecule to travel distances of several hundred nanometres along the actin filament.

Actins↗
PubMed2002

Molecular motors: force and movement generated by single myosin II molecules.

Muscle myosin II is an ATP-driven, actin-based molecular motor. Recent developments in optical tweezers technology have made it possible to study movement and force production on the single-molecule level and to find out how different myosin isoforms may have adapted to their specific physiological roles.

Adenosine Triphosphate↗