PubMed Health⌕ Search

Biomedical subjects

Cristiana Di Valentin

Publications and source records attributed to Cristiana Di Valentin.

At least 19 recordsLinked to original sources
PubMed2006

Origin of photoactivity of nitrogen-doped titanium dioxide under visible light.

Nitrogen-doped titanium dioxide (N-TiO2), a photocatalytic material active in visible light, has been investigated by a combined experimental and theoretical approach. The material contains single-atom nitrogen impurities that form either diamagnetic (Nb-) or paramagnetic (Nb*) bulk centers. Both types of Nb centers give rise to localized states in the band gap of the oxide. The relative abundance of these species depends on the oxidation state of the solid, as, upon reduction, electron transfer from Ti3+ ions to Nb* results in the formation of Ti4+ and Nb-. EPR spectra measured under irradiation show that Nb centers are responsible for visible light absorption with promotion of electrons from the band gap localized states to the conduction band or to surface-adsorbed electron scavengers. These results provide a characterization of the electronic states associated with N impurities in TiO2 and, for the first time, a picture of the processes occurring in the solid under irradiation with visible light.

Journal Article↗
PubMed2006

Electronic structure of defect states in hydroxylated and reduced rutile TiO2(110) surfaces.

It has been experimentally observed that a bridging oxygen vacancy on the rutile TiO2(110) surface introduces localized Ti3+ 3d1 states about 1 eV below the conduction band which are not removed upon dissociation of a water molecule and formation of a pair of hydroxyl groups. Density functional calculations based on pure exchange-correlation functionals have not been able to satisfactorily reproduce and analyze these findings. Here we show that a correct description of the localized defect states on reduced and hydroxylated TiO2(110) is achieved only if proper geometry relaxation is accounted for using hybrid exchange functionals. We confirm the electron trapping nature of Ti(OH) groups but find no evidence that these defects should also act as hole traps by formation of Ti4+(OH)* radicals.

Journal Article↗
PubMed2006

Vibrational and electron paramagnetic resonance properties of free and MgO supported AuCO complexes.

The bonding, spin density related properties, and vibrational frequency of CO bound to single Au atom in the gas-phase or supported on MgO surfaces have been investigated with a variety of computational methods and models: periodic plane waves calculations have been compared with molecular approaches based on atomic orbital basis sets; pseudopotential methods with all electron fully relativistic calculations; various density functional theory (DFT) exchange-correlation functionals with the unrestricted coupled-cluster singles and doubles with perturbative connected triples [CCSD(T)]. AuCO is a bent molecule but the potential for bending is very soft, and small changes in the bond angle result in large changes in the CO gas-phase vibrational frequency. At the equilibrium geometry the DFT calculated vibrational shift of CO with respect to the free molecule is about -150 cm(-1), whereas smaller values -60-70 cm(-1) are predicted by the more accurate CCSD(T) method. These relatively large differences are due to the weak and nonclassic bonding in this complex. Upon adsorption on MgO, the CO vibrational shift becomes much larger, about -290 cm(-1), due to charge transfer from the basic surface oxide anion to AuCO. This large redshift is predicted by all methods, and is fully consistent with that measured for MgOAuCO complexes. The strong influence of the support on the AuCO bonding is equally well described by all different approaches.

Journal Article↗
PubMed2006

Ab initio molecular dynamics simulation of NO reactivity on the CaO(001) surface.

Ab initio molecular dynamics (MD) is used to investigate NO reaction processes on the (001) surface of CaO. A novel path is proposed for the first steps of nitrogen oxides reactivity catalyzed by the CaO surface. The mechanism consists of the formation of anionic dimers, adsorbing on the surface cations, at the expense of oxidized NO species adsorbed on surface anions. The complete charge-transfer process takes place in two steps, producing first monovalent anionic dimers (NO)2- and, later on, divalent anionic dimers (NO)2(2-). These redox processes cause spin quenching and are observed in the short time scale of the ab initio MD simulation at 300 K. The results presented provide a rationalization of a recent electron spin resonance (ESR) investigation indicating that the spectroscopy is silent to most of the nitrogen oxide species adsorbed on CaO powders, despite deposition of paramagnetic NO molecules at room temperature.

Journal Article↗
PubMed2006

Electron traps on oxide surfaces: (H+)(e-) pairs stabilized on the surface of 17O enriched CaO.

(H+)(e-) pairs generated at the surface of polycrystalline CaO are analyzed for the first time in terms of the interaction of the unpaired electron spin with the nuclear spin of the 17O anions of the surface. CaO crystals enriched in the 17O isotope are prepared and the corresponding hyperfine coupling constants are measured in electron paramagentic resonance (EPR) spectra. The results are analyzed on the basis of cluster model density functional theory calculations. The computed hyperfine coupling constants for (H+)(e-) pairs formed on the edge, corner, and reverse corner sites of the CaO surface allow a tentative assignment of two observed spectral features to specific morphological surface sites.

Journal Article↗
PubMed2006

Density-functional model cluster studies of EPR g tensors of Fs+ centers on the surface of MgO.

We report g tensors of surface color centers, so-called F(s) (+) centers, of MgO calculated with two density-functional approaches using accurately embedded cluster models. In line with recent UHV measurements on single-crystalline MgO film, we determined only small g-tensor anisotropies and negative shifts Deltag identical with g-g(e) for all F(s) (+) sites considered, namely, (001)-terrace, step, edge, and corner sites. The g values are very sensitive to the local structure of the defect: relaxation reverses the sign of Deltag. However, accounting for the spin-orbit interaction either self-consistently or perturbatively yields very similar results. In addition to the values of the tensor components, their direction with respect to the surface was determined. In contrast to edges, significant deviations from ideal C(2v) symmetry were found for F(s) (+) centers at steps. Recent data on single-crystalline thin films are reevaluated in the light of these results.

Journal Article↗
PubMed2006

Excess electrons stabilized on ionic oxide surfaces.

Surface excess electrons are remarkable chemical entities that provide great opportunities for the design of new materials with precisely tuned electronic and magnetic properties. In this Account, we describe the structure and electronic properties of excess electron centers generated at the surface of insulating oxides. We also outline the elementary mechanisms that are at the basis of the generation of excess electrons at solid surfaces, setting a comparison to the general problem of excess electron localization in condensed media. Emphasis is given to morphological aspects relative to the surface-trapping sites as deduced from combined electron paramagnetic resonance and accurate quantum chemical calculations. The remarkable reactivity featured by the so formed "electron-rich" surfaces is illustrated, describing the reduction of simple diatomic molecules that form adsorbed radical anions via direct surface to adsorbate electron transfer.

Journal Article↗
PubMed2005

Nature of the chemical bond between metal atoms and oxide surfaces: new evidences from spin density studies of K atoms on alkaline earth oxides.

We have studied the interaction of K atoms with the surface of polycrystalline alkaline-earth metal oxides (MgO, CaO, SrO) by means of CW- and Pulsed-EPR, UV-Vis-NIR spectroscopies and DFT cluster model calculations. The K adsorption site is proposed to be an anionic reverse corner formed at the intersection of two steps, where K binds by more than 1 eV, resulting in thermally stable species up to about 400 K. The bonding has small covalent and large polarization contributions, and the K atom remains neutral, with one unpaired electron in the valence shell. The interaction results in strong modifications of the K electronic wave function which are directly reflected by the hyperfine coupling constant, (K)a(iso). This is found to be a very efficient "probe" to measure the degree of metal-oxide interaction which directly depends on the substrate basicity. These results provide an original and general model of the early stages of the metal-support interaction in the case of ionic oxides.

Journal Article↗
PubMed2005

O2 interaction and reactivity on a model hydroxylated rutile(110) surface.

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.

Journal Article↗
PubMed2005

Adsorption of water on reconstructed rutile TiO2(011)-(2 x 1): Ti=O double bonds and surface reactivity.

Recent combined experimental and theoretical studies (Beck et al., Phys. Rev. Lett. 2004, 93, 036104) have provided evidence for Ti=O double-bonded titanyl groups on the reconstructed rutile TiO(2)(011)-(2 x 1) surface. The adsorption of water on the same surface is now investigated to further probe the properties of these groups, as well as to confirm their existence. Ultraviolet photoemission experiments show that water is adsorbed in molecular form at a sample temperature of 110 K. At the same time, the presence of a 3sigma state in the photoemission spectra and work function measurements indicate a significant amount of hydroxyls within the first monolayer of water. At room temperature, scanning tunneling microscopy (STM) suggests that dissociated water is present, and about 30% of the surface active sites are hydroxylated. These findings are well explained by total energy density functional theory calculations and Car-Parrinello molecular dynamics simulations for water adsorption on the titanyl model of TiO(2)(011)-(2 x 1). The theoretical results show that a mixed molecular/dissociative layer is the most stable configuration in the monolayer regime at low temperatures, while complete dissociation takes place at 250 K. The arrangement of the protonated mono-coordinated oxygens in the mixed molecular/dissociated layer is consistent with the observed short-range order of the hydroxyls in the STM images.

Journal Article↗
PubMed2005

Characterization of paramagnetic species in N-doped TiO2 powders by EPR spectroscopy and DFT calculations.

Electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations are combined for the first time in an effort to characterize the paramagnetic species present in N-doped anatase TiO2 powders obtained by sol-gel synthesis. The experimental hyperfine coupling constants are well reproduced by two structurally different nitrogen impurities: substitutional and interstitial N atoms in the TiO2 anatase matrix. DFT calculations show that the nitrogen impurities induce the formation of localized states in the band gap. Substitutional nitrogen states lie just above the valence band, while interstitial nitrogen states lie higher in the gap. Excitations from these localized states to the conduction band may account for the absorption edge shift toward lower energies (visible region) observed in the case of N-doped TiO2 with respect to pure TiO2 (UV region). Calculations also show that nitrogen doping leads to a substantial reduction of the energy cost to form oxygen vacancies in bulk TiO2. This suggests that nitrogen doping is likely to be accompanied by oxygen vacancy formation. Finally, we propose that the relative abundance of the two observed nitrogen-doping species depends on the preparation conditions, such as the oxygen concentration in the atmosphere and the annealing temperature during synthesis.

Letter↗
PubMed2005

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites.

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.

Journal Article↗
PubMed2005

Theory of nanoscale atomic lithography. An ab initio study of the interaction of "cold" Cs atoms with organthiols self-assembled monolayers on Au(111).

This paper deals with the microscopic mechanism of nanolithography of self-assembled monolayers (SAM) of alkanethiol molecules on Au(111) induced by the exposure of the film to a beam of "cold" Cs atoms. Density functional theory calculations have been carried out to elucidate the mechanism of interaction of the Cs atoms with the SAM. We found that the film damage occurs in two steps: the Cs atom penetrates the SAM and at a distance of 10-12 Angstrom from the surface donates one electron to Au, forming a Cs(+) cation which binds strongly to the surface and interacts with the polar head of the SR molecule. The thermal energy released in this process largely exceeds the energy required to stimulate the desorption of RS-SR disulfide molecules from the Au surface with consequent damage of the film. No chemical interaction occurs between Cs or Cs(+) and the hydrocarbon chain of the thiol molecule.

Cesium↗
PubMed2004

Surface structure of TiO2(011)-(2x1).

A combined experimental and first principles study of the (2x1)-reconstructed rutile TiO2(011) surface is presented. Our results provide evidence that the surface structure is described by a model that includes onefold coordinated (titanyl) oxygen atoms giving rise to double bonded Ti=O species. These species should play a special role in the enhanced photocatalytic activity of the TiO2(011) surface.

Journal Article↗
PubMed2004

Probing the basicity of regular and defect sites of alkaline earth metal oxide surfaces by BF3 adsorption: a theoretical analysis.

The basicity of regular and low-coordinate (LC) sites (steps, edges and corners) at the surface of alkaline earths with NaCl structure (MgO, CaO, SrO, and BaO) has been investigated by using BF3 as a probe molecule. B-O and B-F distances; O-B-F bond angles; B-F asymmetric stretching frequencies; O, B and F 1s core-level binding energies; and the interaction energy of adsorbed BF3 were determined by means of DFT calculations on cluster models. These adsorption properties were compared with those of complexes of BF3 with molecules with various basicities (water, ammonia, phosphine, etc.). We show that many properties of adsorbed BF3, and in particular the experimentally accessible shifts in vibrational frequency, in B and F 1s core levels, and in BF3 desorption temperature, exhibit a linear correlation with the surface basicity as measured by the vertical ionization potential of the oxide anions. On the other hand, shifts of the O 1s core level binding energy do not provide a simple way to detect surface basicity. On a given oxide surface, the differing basicities of various sites result in measurable differences in adsorption properties. This suggests the potential use of BF3 as a probe molecule for titrating LC sites on the surface of ionic oxides.

Journal Article↗
PubMed2004

Nucleation of Pd dimers at defect sites of the MgO(100) surface.

Point defects on oxide surfaces are presumed to be preferential nucleation sites for supported metal clusters. Under typical growth conditions, dimers constitute the first step in island nucleation. First-principles calculations on the formation of Pd dimers on regular and defect sites of the MgO(100) surface show that nucleation occurs with large dimer binding energies at divacancies and charged oxygen vacancies (F+ centers), while it is less favorable on steps and neutral F centers. The extensive database of defect trapping/attachment properties gives a firm basis to rationalize recent atomic-force microscopy findings and provides guidelines valid, in general, for ionic substrates.

Journal Article↗