PubMed Health⌕ Search

Biomedical subjects

D A Winkelmann

Publications and source records attributed to D A Winkelmann.

At least 19 recordsLinked to original sources
PubMed2000

Dynamics of cytoplasmic dynein in living cells and the effect of a mutation in the dynactin complex actin-related protein Arp1.

Cytoplasmic dynein is a minus-end-directed microtubule motor that participates in multiple cellular activities such as organelle transport and mitotic spindle assembly [1]. To study the dynamic behavior of cytoplasmic dynein in the filamentous fungus Aspergillus nidulans, we replaced the gene for the cytoplasmic dynein heavy chain, nudA, with a gene encoding a green fluorescent protein (GFP)-tagged chimera, GFP-nudA. The GFP-NUDA fusion protein is fully functional in vivo: strains expressing only the GFP-tagged nudA grow as well as wild-type strains. Fluorescence microscopy showed GFP-NUDA to be in comet-like structures that moved in the hyphae toward the growing tip. Retrograde movement of some GFP-NUDA comets after they arrived at the tip was also observed. These dynamics of GFP-NUDA were not observed in cells treated with a microtubule-destabilizing drug, benomyl, suggesting they are microtubule-dependent. The rate of GFP-NUDA tip-ward movement is similar to the rate of cytoplasmic microtubule polymerization toward the hyphal tip, suggesting that GFP-NUDA is associated and moving with the polymerizing ends of microtubules. A mutation in actin-related protein Arp1 of the dynactin complex abolishes the presence of these dynamic GFP-NUDA structures near the hyphal tip, suggesting a targeting role of the dynactin complex.

Aspergillus nidulans↗
PubMed1999

Myosin II folding is mediated by a molecular chaperonin.

The folding pathway of the heavy meromyosin subfragment (HMM) of a skeletal muscle myosin has been investigated by in vitro synthesis of the myosin heavy and light chains in a coupled transcription and translation assay. Analysis of the nascent translation products for folding intermediates has identified a major intermediate that contains all three myosin subunits in a complex with the eukaryotic cytosolic chaperonin. Partially folded HMM is released from this complex in an ATP-dependent manner. However, biochemical and functional assays reveal incomplete folding of the myosin motor domain. Dimerization of myosin heavy chains and association of heavy and light chains are accomplished early in the folding pathway. To test for other factors necessary for the complete folding of myosin, a cytoplasmic extract was prepared from myotubes produced by a mouse myogenic cell line. This extract dramatically enhanced the folding of HMM, suggesting a role for muscle-specific factors in the folding pathway. We conclude that the molecular assembly of myosin is mediated by the eukaryotic cytosolic chaperonin with folding of the motor domain as the slow step in the pathway.

Adenosine Triphosphate↗
PubMed1999

Laminin polymerization induces a receptor-cytoskeleton network.

The transition of laminin from a monomeric to a polymerized state is thought to be a crucial step in the development of basement membranes and in the case of skeletal muscle, mutations in laminin can result in severe muscular dystrophies with basement membrane defects. We have evaluated laminin polymer and receptor interactions to determine the requirements for laminin assembly on a cell surface and investigated what cellular responses might be mediated by this transition. We found that on muscle cell surfaces, laminins preferentially polymerize while bound to receptors that included dystroglycan and alpha7beta1 integrin. These receptor interactions are mediated through laminin COOH-terminal domains that are spatially and functionally distinct from NH2-terminal polymer binding sites. This receptor-facilitated self-assembly drives rearrangement of laminin into a cell-associated polygonal network, a process that also requires actin reorganization and tyrosine phosphorylation. As a result, dystroglycan and integrin redistribute into a reciprocal network as do cortical cytoskeleton components vinculin and dystrophin. Cytoskeletal and receptor reorganization is dependent on laminin polymerization and fails in response to receptor occupancy alone (nonpolymerizing laminin). Preferential polymerization of laminin on cell surfaces, and the resulting induction of cortical architecture, is a cooperative process requiring laminin- receptor ligation, receptor-facilitated self-assembly, actin reorganization, and signaling events.

Actins↗
PubMed1998

Acting on actin: the electric motility assay.

We have developed a novel technique which allows one to direct the two dimensional motion of actin filaments on a myosin coated sheet using a weak electric field parallel to the plane of motion. The filament velocity can be increased or decreased, and even reversed, as a function of orientation and strength of the field. PMMA (poly(methylmethacrylate)) gratings, which act as rails for actin, allow one for the first time to explore three quadrants of the force velocity diagram. We discuss effective friction, duty ratio and stall force at different myosin densities. A discontinuity in the velocity force relationship suggests the existence of dynamical phase transition.

Actins↗
PubMed1997

Collagen fibrillogenesis in situ: fibril segments become long fibrils as the developing tendon matures.

Tissue architecture, stability, and mechanical attributes are all determined by the structure and organization of collagen fibrils. Therefore, the characterization of fibril growth steps and determination of how this growth is regulated is essential to the elucidation of how tissues are assembled. We have proposed that fibril segments are intermediates in the formation of mature fibrils. The purpose of this study was to determine the length and structure of fibrils within a relatively mature tendon. The in situ determination of length performed here was only the second direct determination of fibril length in a vertebrate connective tissue and the first for a relatively mature tissue. The data demonstrate that the fibrils were discontinuous at 18 days of tendon development. However, both ends were not present in any of the analyzed fibrils within the 18-day tendon. Because the data set was 50-60 microm, this indicates a mean fibril length greater than 60 microm. These data are in contrast to data from the 14-day tendon, in which 80% of the fibrils had both ends in a 26-microm data set and the mean segment length was shown to be 10-30 microm. There were equal numbers of alpha and beta ends in the 18-day tendon. The structure of the ends was comparable to that in the less mature tendon. The data also indicate that fibril asymmetry and structure were maintained. The increase in fibril length is interpreted as being the result of a post-depositional, regulated assembly of segments via a lateral association/fusion to form mature fibrils. This hypothesis predicts an increase in diameter at this stage of development. The diameter increases have been documented, but this is the first demonstration of increases in length and maintenance of segment structure during this important stage of tendon development.

Animals↗
PubMed1996

Glycine 699 is pivotal for the motor activity of skeletal muscle myosin.

Myosin couples ATP hydrolysis to the translocation of actin filaments to power many forms of cellular motility. A striking feature of the structure of the muscle myosin head domain is a 9-nm long "lever arm" that has been postulated to produce a 5-10-nm power stroke. This motion must be coupled to conformational changes around the actin and nucleotide binding sites. The linkage of these sites to the lever arm has been analyzed by site-directed mutagenesis of a conserved glycine residue (G699) found in a bend joining two helices containing the highly reactive and mobile cysteine residues, SH1 and SH2. Alanine mutagenesis of this glycine (G699A) dramatically alters the motor activity of skeletal muscle myosin, inhibiting the velocity of actin filament movement by > 100-fold. Analysis of the defect in the G699A mutant myosin is consistent with a marked slowing of the transition within the motor domain from a strong binding to a weak binding interaction with actin. This result is interpreted in terms of the role of this residue (G699) as a pivot point for motion of the lever arm. The recombinant myosin used in these experiments has been produced in a unique expression system. A shuttle vector containing a regulated muscle-specific promoter has been developed for the stable expression of recombinant myosin in C2C12 cells. The vector uses the promoter/enhancer region, the first two and the last five exons of an embryonic rat myosin gene, to regulate the expression of an embryonic chicken muscle myosin cDNA. Stable cell lines transfected with this vector express the unique genetically engineered myosin after differentiation into myotubes. The myosin assembles into myofibrils, copurifies with the endogenous myosin, and contains a complement of muscle-specific myosin light chains. The functional activity of the recombinant myosin is readily analyzed with an in vitro motility assay using a species-specific anti-S2 mAb to selectively assay the recombinant protein. This expression system has facilitated manipulation and analysis of the skeletal muscle myosin motor domain and is also amenable to a wide range of structure-function experiments addressing questions unique to the muscle-specific cytoarchitecture and myosin isoforms.

Animals↗
PubMed1995

Flexibility of myosin attachment to surfaces influences F-actin motion.

We have analyzed the dependence of actin filament sliding movement on the mode of myosin attachment to surfaces. Monoclonal antibodies (mAbs) that bind to three distinct sites were used to tether myosin to nitrocellulose-coated glass. One antibody reacts with an epitope on the regulatory light chain (LC2) located at the head-rod junction. The other two react with sites in the rod domain, one in the S2 region near the S2-LMM hinge, and the other at the C terminus of the myosin rod. This method of attachment provides a means of controlling the flexibility and density of myosin on the surface. Fast skeletal muscle myosin monomers were bound to the surfaces through the specific interaction with these mAbs, and the sliding movement of fluorescently labeled actin filaments was analyzed by video microscopy. Each of these antibodies produced stable myosin-coated surfaces that supported uniform motion of actin over the course of several hours. Attachment of myosin through the anti-S2 and anti-LMM mAbs yielded significantly higher velocities (10 microns/s at 30 degrees C) than attachment through anti-LC2 (4-5 microns/s at 30 degrees C). For each antibody, we observed a characteristic value of the myosin density for the onset of F-actin motion and a second critical density for velocity saturation. The specific mode of attachment influences the velocity of actin filaments and the characteristic surface density needed to support movement.

Actins↗
PubMed1995

Motility assays using myosin attached to surfaces through specific binding to monoclonal antibodies.

We have analyzed the dependence of actin filament movement on the mode of myosin attachment to surfaces. Monoclonal antibodies that bind to three distinct sites were used to tether myosin to nitrocellulose-coated glass. One antibody reacts with an epitope on the regulatory light chain located at the head-rod junction. The other two react with sites in the rod domain, one in the S2 region near the S2-LMM hinge, and the other at the C terminus of the myosin rod. These monoclonal antibodies were used to provide increasing flexibility in the mode of attachment. Fast skeletal muscle myosin monomers were bound to the surfaces through the specific interaction with these monoclonal antibodies and the sliding movement of fluorescently labeled actin filaments analyzed by video microscopy. Each of these antibodies produced stable, myosin-coated surfaces that supported uniform movement of actin over the course of several hours. Attachment of myosin through the anti-S2 and anti-LMM monoclonal antibodies yielded a maximum velocity of 10 microns/s at 30 degrees C, whereas attachment through anti-LC2 produced a lower velocity of 4-5 microns/s. Each antibody showed a characteristic minimum myosin density below which sliding movement was no longer supported and an exponential dependence of actin filament velocity on myosin surface density below Vmax. Maximum sliding velocity was achieved over a range of myosin surface densities. Thus, the specific mode of attachment can influence the characteristic velocity of actin filament movement and the surface density needed to support movement. These data are being used to analyze the dynamics of sliding filament assays and evaluate estimates of the average number of motor molecules per unit length of actin required to support movement.

Actins↗
PubMed1993

Three-dimensional structure of myosin subfragment-1: a molecular motor.

Directed movement is a characteristic of many living organisms and occurs as a result of the transformation of chemical energy into mechanical energy. Myosin is one of three families of molecular motors that are responsible for cellular motility. The three-dimensional structure of the head portion of myosin, or subfragment-1, which contains both the actin and nucleotide binding sites, is described. This structure of a molecular motor was determined by single crystal x-ray diffraction. The data provide a structural framework for understanding the molecular basis of motility.

Actins↗
PubMed1993

Actin filament structure probed with monoclonal antibodies.

The interaction of two monoclonal antibodies (mAbs) with actin has been characterized to map the epitopes defined by these mAbs and to determine the accessibility of these sites in the actin filament (F-actin). Both mAbs react specifically with actin in radioimmunoassays and Western blot assays, and by immunoprecipitation. The location of the epitopes within the primary structure of actin has been determined using limited proteolysis of actin and Western blots, or using immunoprecipitation of truncated actin fragments synthesized in a cell free translation assay. Both mAbs bind to the C-terminal fragment of actin (residues 68-375) produced by chymotrypsin cleavage. One epitope is further localized to a 9.9 kD peptide corresponding to residues 5-93. Therefore, the epitope defined by this mAb (2G11.4) lies between residues Lys68 and Glu93 of actin. The location of the other epitope was determined by immunoprecipitation of actin fragments synthesized in vitro. Removal of residues 356-365 from the C-terminus of actin completely abolished the binding of mAb 4E3.adl. Therefore, this mAb defines an epitope that involves residues between Trp356 and Ala365. The accessibility of these epitopes in native F-actin was determined with solution binding assays and characterized by immunoelectron microscopy. Monoclonal antibody 4E3.adl binds strongly to filaments, resulting in bundling or decoration of F-actin depending on the valency of the mAb, and indicating that the epitope is readily accessible in F-actin. In contrast, mAb 2G11.4 disrupts F-actin structure, resulting in the formation of an amorphous immunoprecipitate. These results place constraints on models of actin filament structure.

Actins↗
PubMed1993

Inhibition of actin filament movement by monoclonal antibodies against the motor domain of myosin.

Conformational transitions in defined regions of the motor domain of skeletal muscle myosin involved in ATP hydrolysis, actin binding and motility were probed with monoclonal antibodies. Competition binding assays demonstrate that three different monoclonal antibodies react with spatially related sites on the myosin heavy chain. One recognizes a sequential epitope between residues 65 and 80 and has no effect on actin filament movement in an in vitro motility assay despite tight binding to myosin and acto-S1. The other two monoclonal antibodies react with sequential epitopes between residues 29 and 60 and both inhibit actin filament movement. A fourth monoclonal antibody reacts with the N-terminus of the heavy chain (residues 1-12) at a spatially distinct site on the myosin head and also inhibits actin filament movement. These four monoclonal antibodies have been mapped by immunoelectron microscopy to the large, actin binding region of the myosin head; however, the antibody binding sites remain accessible on rigor complexes of acto-S1. Thus, this group of monoclonal antibodies identify sequential epitopes in a mobile segment of the myosin heavy chain. In addition, two conformation-sensitive monoclonal antibodies are described that are affected by ATP and actin binding to myosin S1, and display distinct and marked inhibitory effects on actin filament movement. In contrast, an anti-light chain monoclonal antibody that binds near the myosin head-rod junction has little effect on the number and velocity of moving actin filaments. These results identify mobile regions on the myosin head that are perturbed by antibody binding and that may be linked to force production and motion.

Actins↗
PubMed1993

Segregated assembly of muscle myosin expressed in nonmuscle cells.

Skeletal muscle myosin cDNAs were expressed in a simian kidney cell line (COS) and a mouse myogenic cell line to investigate the mechanisms controlling early stages of myosin filament assembly. An embryonic chicken muscle myosin heavy chain (MHC) cDNA was linked to constitutive promoters from adenovirus or SV40 and transiently expressed in COS cells. These cells accumulate hybrid myosin molecules composed of muscle MHCs and endogenous, nonmuscle, myosin light chains. The muscle myosin is found associated with a Triton insoluble fraction from extracts of the COS cells by immunoprecipitation and is detected in 2.4 +/- 0.8-micron-long filamentous structures distributed throughout the cytoplasm by immunofluorescence microscopy. These structures are shown by immunoelectron microscopy to correspond to loosely organized bundles of 12-16-nm-diameter myosin filaments. The muscle and nonmuscle MHCs are segregated in the transfected cells; the endogenous nonmuscle myosin displays a normal distribution pattern along stress fibers and does not colocalize with the muscle myosin filament bundles. A similar assembly pattern and distribution are observed for expression of the muscle MHC in a myogenic cell line. The myosin assembles into filament bundles, 1.5 +/- 0.6 micron in length, that are distributed throughout the cytoplasm of the undifferentiated myoblasts and segregated from the endogenous nonmuscle myosin. In both cell lines, formation of the myosin filament bundles is dependent on the accumulation of the protein. In contrast to these results, the expression of a truncated MHC that lacks much of the rod domain produces an assembly deficient molecule. The truncated MHC is diffusely distributed throughout the cytoplasm and not associated with cellular stress fibers. These results establish that the information necessary for the segregation of myosin isotypes into distinct cellular structures is contained within the primary structure of the MHC and that other factors are not required to establish this distribution.

Actin Cytoskeleton↗
PubMed1991

Three-dimensional structure of myosin subfragment-1 from electron microscopy of sectioned crystals.

Image analysis of electron micrographs of thin-sectioned myosin subfragment-1 (S1) crystals has been used to determine the structure of the myosin head at approximately 25-A resolution. Previous work established that the unit cell of type I crystals of myosin S1 contains eight molecules arranged with orthorhombic space group symmetry P212121 and provided preliminary information on the size and shape of the myosin head (Winkelmann, D. A., H. Mekeel, and I. Rayment. 1985. J. Mol. Biol. 181:487-501). We have applied a systematic method of data collection by electron microscopy to reconstruct the three-dimensional (3D) structure of the S1 crystal lattice. Electron micrographs of thin sections were recorded at angles of up to 50 degrees by tilting the sections about the two orthogonal unit cell axes in sections cut perpendicular to the three major crystallographic axes. The data from six separate tilt series were merged to form a complete data set for 3D reconstruction. This approach has yielded an electron density map of the unit cell of the S1 crystals of sufficient detail. to delineate the molecular envelope of the myosin head. Myosin S1 has a tadpole-shaped molecular envelope that is very similar in appearance to the pear-shaped myosin heads observed by electron microscopy of rotary-shadowed and negatively stained myosin. The molecule is divided into essentially three morphological domains: a large domain on one end of the molecule corresponding to approximately 60% of the total molecular volume, a smaller central domain of approximately 30% of the volume that is separated from the larger domain by a cleft on one side of the molecule, and the smallest domain corresponding to a thin tail-like region containing approximately 10% of the volume. This molecular organization supports models of force generation by myosin which invoke conformational mobility at interdomain junctions within the head.

Actomyosin↗
PubMed1989

Collagen fibrillogenesis in situ: fibril segments are intermediates in matrix assembly.

The assembly of discontinuous fibril segments and bundles was studied in 14-day chicken embryo tendons by using serial sections, transmission electron microscopy, and computer-assisted image reconstruction. Fibril segments were first found in extracytoplasmic channels, the sites of their polymerization; they also were found within fibril bundles. Single fibril segments were followed over their entire length in consecutive sections, and their lengths ranged from 7 to 15 microns. Structural differences in the ends of the fibril segments were identified, suggesting that the amino/carboxyl polarity of the fibril segment is reflected in its architecture. Our data indicate that fibril segments are precursors in collagen fibril formation, and we suggest that postdepositional fusion of fibril segments may be an important process in tendon development and growth.

Animals↗
PubMed1987

Myosin binding to actin. Structural analysis using myosin fragments.

The actin-binding property of the myosin head 20 K (K = 10(3) Mr) fragment has been examined by a structural assay. A new fragment is produced by digestion of scallop myosin synthetic filaments with a lysine-specific protease. This fragment consists of the rod together with two "nubs" corresponding to the 20 K fragment, which retain both the regulatory and essential light chains. Myosin filaments, digested for different lengths of time, were mixed with F-actin and visualized by electron microscopy after negative staining. When the head is cleaved, but the head fragments remain associated, the filaments bind actin in an ATP-sensitive manner. Filaments made primarily of the nub-containing fragments, however, bind actin very poorly. In addition, electron microscopic characterization of actin-binding by the isolated tryptic 20 K fragment from chicken myosin indicates that binding of this fragment to actin is probably non-specific. These results suggest that interactions between the 20 K region and the other peptides in the head are essential for actin-binding.

Actins↗
PubMed1986

Probing myosin head structure with monoclonal antibodies.

Monoclonal antibodies that react with defined regions of the heavy and light chains of chicken skeletal muscle myosin have been used to provide a correlation between the primary and the tertiary structures of the head. Electron microscopy of rotary shadowed antibody-myosin complexes shows that the sites for three epitopes in the 25,000 Mr tryptic fragment (25k) of subfragment-1, including one within 4000 Mr of the amino terminus of the myosin heavy chain, are clustered 145(+/- 20) A from the head-rod junction. An epitope in the 50,000 Mr fragment maps even further out on the head. These antibodies bind to the head in several orientations, suggesting that each of the heads can rotate can rotate 180 degrees about the head-rod junction. The epitopes are accessible on subfragment-1 bound to actin when they were probed with Fab fragments; therefore, none of these heavy chain sites is is on the contact surface between the head and actin. Two of the anti-25k antibodies affect the K+-EDTA-and Ca2+-ATPase activities of myosin in a manner that mimics the effect on activity of the modification of the reactive thiol, SH-1. These two antibodies also inhibit the actin-activated ATPase non-competitively with respect to actin. None of the other eight antibodies tested had any marked effect on activity. A monoclonal antibody that reacts with an epitope in the amino-terminal third of myosin light chain 2 maps close to the head-rod junction. A polyclonal antibody specific for the amino terminus of light chain 3 binds further up in the "neck region" of the head, indicating that these portions of the two classes of light chains are located at different sites.

Adenosine Triphosphatases↗
PubMed1985

Packing analysis of crystalline myosin subfragment-1. Implications for the size and shape of the myosin head.

Crystals of myosin subfragment-1 have been examined by X-ray diffraction and electron microscopy to determine how the molecules pack in the unit cell and to gain preliminary information on the size and shape of the myosin head. Subfragment-1 crystallizes in space group P212121. Analysis of the X-ray diffraction photographs shows that there are eight molecules in the unit cell with two in the asymmetric unit related by a non-crystallographic or local 2-fold axis. It also indicates that in projection down the a axis, two molecules of myosin subfragment-1 lie almost directly on top of one another except for a translation of about 9 A along c. Small crystals were fixed and embedded in the presence of tannic acid, and thin sections were cut perpendicular to each of the three crystallographic axes. Image analysis of micrographs recorded from these sections confirm the packing arrangement deduced from X-ray diffraction, and give the approximate size and shape of the molecule in the crystal lattice. They show that the molecule is at least 160 A long with a maximum thickness of about 60 A, and that it has marked curvature in the unit cell.

Animals↗