PubMed Health⌕ Search

Biomedical subjects

D B Chrisey

Publications and source records attributed to D B Chrisey.

8 recordsLinked to original sources
PubMed2007

Laser microfabrication of hydroxyapatite-osteoblast-like cell composites.

We have developed a novel approach for layer-by-layer growth of tissue-engineered materials using a direct writing process known as matrix assisted pulsed laser evaporation direct write (MAPLE DW). Unlike conventional cell-seeding methods, this technique provides the possibility for cell-material integration prior to artificial tissue fabrication. This process also provides greater flexibility in selection and processing of scaffold materials. In addition, MAPLE DW offers rapid computer-controlled deposition of mesoscopic voxels at high spatial resolutions. We have examined MAPLE DW processing of zirconia and hydroxyapatite scaffold materials that can provide a medical device with nearly inert and bioactive implant-tissue interfaces, respectively. We have also demonstrated codeposition of hydroxyapatite, MG 63 osteoblast-like cells, and extracellular matrix using MAPLE DW. We have shown that osteoblast-like cells remain viable and retain the capacity for proliferation when codeposited with bioceramic scaffold materials. Our results on MG 63-hydroxyapatite composites can be extended to develop other integrated cell-scaffold structures for medical and dental applications.

Cell Line, Tumor↗
PubMed2006

Two photon induced polymerization of organic-inorganic hybrid biomaterials for microstructured medical devices.

Three-dimensional microstructured medical devices, including microneedles and tissue engineering scaffolds, were fabricated by two photon induced polymerization of Ormocer organic-inorganic hybrid materials. Femtosecond laser pulses from a titanium:sapphire laser were used to break chemical bonds on Irgacure 369 photoinitiator within a small focal volume. The radicalized starter molecules reacted with Ormocer US-S4 monomers to create radicalized polymolecules. The desired structures are fabricated by moving the laser focus in three dimensions using a galvano-scanner and a micropositioning system. Ormocer surfaces fabricated using two photon induced polymerization demonstrated acceptable cell viability and cell growth profiles against B35 neuroblast-like cells and HT1080 epithelial-like cells. Lego-like interlocking tissue engineering scaffolds and microneedle arrays with unique geometries were created using two photon induced polymerization. These results suggest that two photon induced polymerization is able to create medical microdevices with a larger range of sizes, shapes, and materials than chemical isotropic etching, injection molding, reactive ion etching, surface micromachining, bulk micromachining, polysilicon micromolding, lithography-electroforming-replication, or other conventional microfabrication techniques.

Animals↗
PubMed2006

Three-dimensional direct writing of B35 neuronal cells.

We have demonstrated two-dimensional and three-dimensional transfer of B35 neuronal cells onto and within polymerized Matrigel substrates, using matrix-assisted pulsed laser evaporation-direct write (MDW). The B35 cells were transferred from a quartz ribbon to depths of up to 75 microm by systematically varying the fluence emitted from the ArF (lambda = 193 nm) laser source. MDW-transferred cells were examined using terminal deoxynucleotidyl transferase biotin-dUTP nick end labeling (TUNEL), 4',6-diamidino-2-phenylindole (DAPI), and alpha-tubulin staining. Confocal microscopy has shown that the transferred B35 cells extended their axons outward in three dimensions within the polymerized Matrigel substrate. The B35 cells made axonal connections and formed a three-dimensional neural network within 72 h after MDW transfer. In addition, TUNEL staining demonstrated that only 3% of the B35 cells underwent apoptosis after being transferred using the MDW process. MDW and other emergent direct write processes may provide unique approaches for creating layered, heterogeneous, three-dimensional cell-seeded scaffolds for use in peripheral nerve repair.

Animals↗
PubMed2002

Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer.

We have generated mesoscopic patterns of viable Escherichia coli on Si(1 1 1), glass, and nutrient agar plates by using a novel laser-based transfer process termed matrix assisted pulsed laser evaporation direct write (MAPLE DW). We observe no alterations to the E. coli induced by the laser-material interaction or the shear forces during the transfer. Transferred E. coli patterns were observed by optical and electron microscopes, and cell viability was shown through green fluorescent protein (GFP) expression and cell culturing experiments. The transfer mechanism for our approach appears remarkably gentle and suggests that active biomaterials such as proteins, DNA and antibodies could be serially deposited adjacent to viable cells. Furthermore, this technique is a direct write technology and therefore does not involve the use of masks, etching, or other lithographic tools.

Escherichia coli↗
PubMedDate not supplied

Picoliter-scale protein microarrays by laser direct write.

We demonstrate the accurate picoliter-scale dispensing of active proteins using a novel laser transfer technique. Droplets of protein solution are dispensed onto functionalized glass slides and into plastic microwells, activating as small as 50-microm diameter areas on these surfaces. Protein microarrays fabricated by laser transfer were assayed using standard fluorescent labeling techniques to demonstrate successful protein and antigen binding. These results indicate that laser transfer does not damage the active site of the dispensed protein and that this technique can be used to successfully fabricate a functioning protein microarray. Also, as a result of the efficient nature of the process, material usage is reduced by two to four orders of magnitude compared to conventional pin dispensing methods for protein spotting.

Equipment Design↗
PubMedDate not supplied

Pulsed laser deposition of thin film hydroxyapatite. Applications for flexible catheters.

Skin exit site infections are a major source of morbidity in patients with indwelling percutaneous catheters. Ceramic materials, such as hydroxyapatite (HA) and alumina, have demonstrated excellent biocompatibility and low rates of infection in soft tissues. Previous attempts to design ceramic materials for use as percutaneous connectors have resulted in rigid discs or solid cylindrical tubes. In order to take advantage of the inherent properties of HA without reducing patient comfort or mobility, the feasibility of applying a thin film of HA directly onto a flexible polymeric catheter was studied. The coating was applied by pulsed laser deposition (PLD). The beam from a KrF excimer laser impinged upon a target of pressed and sintered HA, producing a plume of ablated material that was deposited onto the catheter tubing. By rotating the tubing, an even coating of HA was applied to the catheter at a thickness of approximately 0.50 microm. The coating did not compromise the flexibility of the catheter tubing. Hence, PLD of a thin film of HA at the exit site of percutaneous catheters may be a means of incorporating the bioactive and biocompatible properties of HA with the mobility and patient comfort that characterize polymeric catheters.

Bacterial Infections↗