PubMed Health⌕ Search

Biomedical subjects

D E Tronrud

Publications and source records attributed to D E Tronrud.

12 recordsLinked to original sources
PubMed1998

Refined structure of Cro repressor protein from bacteriophage lambda suggests both flexibility and plasticity.

The structure of the Cro repressor protein from phage lambda has been refined to a crystallographic R-value of 19.3% at 2.3 A resolution. The re fined model supports the structure as originally described in 1981 and provides a basis for comparison with the Cro-operator complex described in the accompanying paper. Changes in structure seen in different crystal forms and modifications of Cro suggest that the individual subunits are somewhat plastic in nature. In addition, the dimer of Cro suggests a high degree of flexibility, which may be important in forming the Cro-DNA complex. The structure of the Cro subunit as determined by NMR agrees reasonably well with that in the crystals (root-mean-square discrepancy of about 2 A for all atoms). There are, however, only a limited number of intersubunit distance constraints and, presumably for this reason, the different NMR models for the dimer vary substantially among themselves (discrepancies of 1.3 to 5.5 A). Because of this variation it is not possible to say whether the range of discrepancies between the X-ray and NMR Cro dimers (2.9 to 7.5 A) represent a significant difference between the X-ray and solution structures. It has previously been proposed that substitutions of Tyr26 in Cro increase thermal stability by the "reverse hydrophobic effect", i.e. by exposing 40% more hydrophobic surface to solvent in the folded form than in the unfolded state. The refined structure, however, suggests that Tyr26 is equally solvent exposed in the folded and unfolded states. The most stabilizing substitution is Tyr26-->Asp and in this case it appears that interaction with an alpha-helix dipole is at least partly responsible for the enhanced stability.

Bacteriophage lambda↗
PubMed1992

Structural comparison suggests that thermolysin and related neutral proteases undergo hinge-bending motion during catalysis.

Crystal structures are known for three members of the bacterial neutral protease family: thermolysin from Bacillus thermoproteolyticus (TLN), the neutral protease from Bacillus cereus (NEU), and the elastase of Pseudomonas aeruginosa (PAE), both in free and ligand-bound forms. Each enzyme consists of an N-terminal and C-terminal domain with the active site formed at the junction of the two domains. Comparison of the different molecules reveals that the structure within each domain is well conserved, but there are substantial hinge-bending displacements (up to 16 degrees) of one domain relative to the other. These domain motions can be correlated with the presence or absence of bound inhibitor, as was previously observed in the specific example of PAE [Thayer, M.M., Flaherty, K.M., & McKay, D.B. (1991) J. Biol. Chem. 266, 2864-2871]. The binding of inhibitor appears to be associated with a reduction of the domain hinge-bending angle by 6-14 degrees and a closure of the "jaws" of the active site cleft by about 2 A. Crystallographic refinement of the structure of thermolysin suggests that electron density seen in the active site of the enzyme in the original structure determination probably corresponds to a bound dipeptide. Thus, the crystal structure appears to correspond to an enzyme-inhibitor or enzyme-product complex, rather than the free enzyme, as has previously been assumed.

Amino Acid Sequence↗
PubMed1992

Conjugate-direction minimization: an improved method for the refinement of macromolecules.

A novel method of function minimization that combines the power of the diagonal approximation to the normal matrix with conjugate directions is described. This method approaches closer to the local minimum than the methods that are commonly used in macromolecular refinement. The weakness of the current methods are analyzed to explain the advantage of the conjugate-direction method.

Chemical Phenomena↗
PubMed1992

Analysis of the effectiveness of proline substitutions and glycine replacements in increasing the stability of phage T4 lysozyme.

It was previously shown that the two replacements Gly 77-->Ala (G77A) and Ala 82-->Pro (A82P) increase the thermostability of phage T4 lysozyme at pH 6.5. Such replacements are presumed to restrict the degrees of freedom of the unfolded protein and so decrease the entropy of unfolding [B. W. Matthews, H. Nicholson, and W. J. Becktel (1987) Proceedings of the National Academy of Science USA Vol. 84, pp. 6663-6667]. To further test this approach, three additional replacements--G113A, K60P and A93P--have been constructed. On the basis of model building, each of these three replacements was judged to be less than optimal because it would tend to introduce unfavorable van der Waals contacts with neighboring parts of the protein. The presence of such contacts was verified for G113A and K60P by conformational adjustments seen in the crystal structures of these mutant proteins. In the case of G113A there are backbone conformational changes of 0.5-1.0 A in the short alpha-helix, 108-113, that includes the site of substitution. In the case of K60P the pyrrolidine ring shows evidence of strain. The thermal stability of each of the three variants at both pH 2.0 and pH 6.5 was found to be very close to that of wild-type lysozyme. The results suggest that the procedure used to predict sites for both Xaa-->Pro and Gly-->Ala is, in principle, correct. At the same time, the increase in stability expected from substitutions of this type is modest, and can easily be offset by strain associated with introduction of the alanine or proline. This means that the criteria used to select substitutions that will increase thermostability have to be stringent at least. In the case of T4 lysozyme this severely limits the number of sites. The analysis reveals a significant discrepancy between the conformational energy surface predicted for the residue preceding a proline and the conformations observed in crystal structures.

Bacteriophage T4↗
PubMed1992

Structural basis for the action of thermolysin.

High resolution X-ray crystallography has been used to determine the modes of binding to thermolysin of a series of different inhibitors including dipeptides, mercaptans, hydroxamates, N-carboxymethyl peptides and phosphonamidates. The interactions displayed by such inhibitors illustrate interactions that are presumed to occur between the enzyme and its substrates during catalysis. The crystallographic analysis, together with model building, suggest a detailed stereochemical mechanism of action for thermolysin and, by analogy, other zinc proteases such as carboxypeptidase A and the angiotensin converting enzyme. Analysis of a series of phosphonamidates, which are presumed to be transition-state analogues, has shown that chemically similar inhibitors can adopt dissimilar modes of binding. These different configurations provide a rationalization for large differences in the kinetics of binding that are observed for these inhibitors. Experiments with thermolysin as a test case suggest that knowledge of the three-dimensional structure of an enzyme or receptor will greatly facilitate the rational design of drugs directed at such targets.

Amino Acid Sequence↗
PubMed1989

Contributions of left-handed helical residues to the structure and stability of bacteriophage T4 lysozyme.

Non-glycine residues in proteins are rarely observed to have "left-handed helical" conformations. For glycine, however, this conformation is common. To determine the contributions of left-handed helical residues to the stability of a protein, two such residues in phage T4 lysozyme, Asn55 and Lys124, were replaced with glycine. The mutant proteins fold normally and are fully active, showing that left-handed non-glycine residues, although rare, do not have an indispensable role in the folding of the protein or in its activity. The thermodynamic stability of the Lys124 to Gly variant is essentially identical with that of wild-type lysozyme. The Asn55 to Gly mutant protein is marginally less stable (0.5 kcal/mol). These results indicate that the conformational energy of a glycine and a non-glycine residue in the left-handed helical conformation are very similar. This is consistent with some theoretical energy distributions, but is inconsistent with others, which suggest that replacements of the sort described here might increase the stability of the protein by up to 5 kcal/mol. Crystallographic analysis of the mutant proteins shows that the backbone conformation of the Lys124 to Gly variant is essentially identical with that of the wild-type structure. In the case of the Asn55 to Gly replacement, however, the (phi, psi) values of residue 55 change by about 20 degrees. This suggests that the energy minimum for left-handed glycine residues is not the same as that for non-glycine residues. This is strongly indicated also by a survey of accurately determined protein crystal structures, which suggests that the energy minimum for left-handed glycine residues is near (phi = 90 degrees, psi = 0 degrees), whereas that for non-glycine residues is close to (phi = 60 degrees, psi = 30 degrees). This apparent energy minimum for glycine is not clearly predicted by any of the theoretical (phi, psi) energy contour maps.

Amino Acid Sequence↗
PubMed1987

Slow- and fast-binding inhibitors of thermolysin display different modes of binding: crystallographic analysis of extended phosphonamidate transition-state analogues.

The modes of binding to thermolysin of two phosphonamidate peptide inhibitors, carbobenzoxy-GlyP-L-Leu-L-Leu (ZGPLL) and carbobenzoxy-L-PheP-L-Leu-L-Ala (ZFPLA), have been determined by X-ray crystallography and refined at high resolution to crystallographic R-values of 17.7% and 17.0%, respectively. (GlyP is used to indicate that the trigonal carbon of the peptide linkage is replaced by the tetrahedral phosphorus of a phosphonamidate group.). These inhibitors were designed to be structural analogues of the presumed catalytic transition state and are potent inhibitors of thermolysin (ZGPLL, Ki = 9.1 nM; ZFPLA, Ki = 0.068 nM) [Bartlett, P. A., & Marlowe, C. K. (1987) Biochemistry (following paper in this issue)]. ZFPLA binds to thermolysin in the manner expected for the transition state and, for the first time, provides direct support for the presumed mode of binding of extended substrates in the S2 subsite. The mode of binding of ZFPLA displays all the interactions that are presumed to stabilize the transition state and supports the postulated mechanism of catalysis [Hangauer, D. G., Monzingo, A. F., & Matthews, B. W. (1984) Biochemistry 23, 5730-5741]. The two oxygens of the phosphonamidate moiety are liganded to the zinc to give overall pentacoordination of the metal. For the second inhibitor the situation is different. Although both ZFPLA and ZGPLL have similar modes of binding in the S1' and S2' subsites, the configurations of the carbobenzoxy-Phe and carbobenzoxy-Gly moieties are different. For ZFPLA the carbonyl group of the carbobenzoxy group is hydrogen bonded directly to the enzyme, whereas in ZGPLL the carbonyl group is rotated 117 degrees, and there is a water molecule interposed between the inhibitor and the enzyme. For ZGPLL only one of the phosphonamidate oxygens is liganded to the zinc. Correlated with the change in inhibitor-zinc ligation from monodentate in ZGPLL to bidentate in ZFPLA there is an increase in the phosphorus-nitrogen bond length of about 0.25 A, strongly suggesting that the phosphonamide nitrogen in ZFPLA is cationic, analogous to the doubly protonated nitrogen of the transition state. The observation that the nitrogen of ZFPLA appears to donate two hydrogen bonds to the protein also indicates that it is cationic. The different configurations adopted by the respective inhibitors are correlated with large differences in their kinetics of binding [Bartlett, P. A., & Marlowe, C. K. (1987) Biochemistry (following paper in this issue)]. These differences in kinetics are not associated with any significant conformational change on the part of the enzyme.(ABSTRACT TRUNCATED AT 250 WORDS)

Binding Sites↗
PubMed1987

Structures of two thermolysin-inhibitor complexes that differ by a single hydrogen bond.

The mode of binding to thermolysin of the ester analog Cbz-GlyP-(O)-Leu-Leu has been determined by x-ray crystallography and shown to be virtually identical (maximum difference 0.2 angstrom) with the corresponding peptide analog Cbz-GlyP-(NH)-Leu-Leu. The two inhibitors provide a matched pair of enzyme-inhibitor complexes that differ by 4.1 kilocalories per mole in intrinsic binding energy but are essentially identical except for the presence or absence of a specific hydrogen bond.

Amides↗
PubMed1986

Crystallographic structural analysis of phosphoramidates as inhibitors and transition-state analogs of thermolysin.

The mode of binding to thermolysin of the unsubstituted phosphoramidate inhibitor N-phosphoryl-L-leucinamide (P-Leu-NH2) has been determined crystallographically and refined at high resolution (R = 17.9% to 0.16-nm resolution). The mode of binding of the naturally occurring thermolysin inhibitor phosphoramidon reported previously [Weaver, L. H., Kester, W. R. and Matthews, B. W. (1977) J. Mol. Biol. 114, 119-132] has also been confirmed by crystallographic refinement (R = 17.4% to 0.23-nm resolution). Phosphoramidon binds to the enzyme with a single oxygen of the phosphoramidate moiety as a zinc ligand. Together with three ligands to the metal from the protein the resultant complex has approximately tetrahedral geometry. However, in the case of P-Leu-NH2, two of the phosphoramidate oxygens interact with the zinc to form a complex that tends towards pentacoordinate. In this respect, P-Leu-NH2 appears to be a better transition-state analog than is phosphoramidon. In addition, the phosphorus-nitrogen bond length in P-Leu-NH2 is 0.18 nm, suggesting that the nitrogen is protonated whereas the same bond in phosphoramidon is much shorter (0.15 nm) suggesting that the nitrogen does not carry a charge. In phosphoramidon the distance from the phosphoramide nitrogen to Glu-143 is 0.39 nm whereas in P-Leu-NH2 this distance decreases to 0.34 nm. Taken together, these observations provide additional evidence in support of the participation of pentacoordinate intermediates in the mechanism of action of thermolysin [Holmes, M. A. and Matthews, B. W. (1981) Biochemistry 20, 6912-6920] and the role of Glu-143 in first promoting the attack of a water molecule on the carbonyl carbon of the scissile bond and subsequently acting as a 'proton shuttle' to transfer the proton to the leaving nitrogen [Monzingo, A. F. and Matthews, B. W. (1984) Biochemistry 23, 5724-5729; Hangauer, D. G., Monzingo, A. F. and Matthews, B. W. (1984) Biochemistry 23, 5730-5741].

Crystallography↗
PubMed1986

Structure and X-ray amino acid sequence of a bacteriochlorophyll A protein from Prosthecochloris aestuarii refined at 1.9 A resolution.

The structure of the water-soluble bacteriochlorophyll a protein (Bchl protein) from the green photosynthetic bacterium Prosthecochloris aestuarii has been refined at 1.9 A resolution to a crystallographic residual of 18.9%. The refinement was carried out without knowledge of the amino acid sequence and has led to an "X-ray sequence". The structure consists of seven Bchl molecules enclosed within a protein "bag" and the refinement supports the general conformation of the molecule described previously. The refinement also supports the previous suggestion that the ligands to the seven Bchl magnesiums are, respectively, five histidines, a carbonyl oxygen from the polypeptide backbone of the protein, and a bound water molecule. The conformations of the seven Bchl head-groups are described in detail. In two cases the magnesium atoms are approximately 0.48 A "below" the plane of the conjugated macrocycle while in the other five cases the atoms are, on average, 0.48 A "above" the plane. The acetyl ring substituents are more-or-less coplanar with the dihydrophorbin macrocycle, consistent with a previous resonance Raman study. The conjugated atoms in each of the seven macrocycles have significant departures from strict planarity. These deviations are similar for Bchls 1, 2 and 3 (class I) and are also similar for Bchls 4, 5, 6 and 7 (class II). Ethylchlorophillide also belongs to class II. The out-of-plane deformations for the class I and class II bacteriochlorophylls appear to correspond to two distinct modes of bending or curvature of the dihydrophorbin macrocycle.

Amino Acid Sequence↗
PubMed1983

Structural analysis of the inhibition of thermolysin by an active-site-directed irreversible inhibitor.

The mode of binding of the irreversible thermolysin inhibitor ClCH2CO-DL-(N-OH)Leu-OCH3 [Rasnick, D., & Powers, J.C. (1978) Biochemistry 17, 4363-4369] has been determined by X-ray crystallography at a resolution of 2.3 A and the structure of the covalent complex refined to give a crystallographic residual of 17.0%. This is the first such structural study of an active-site-directed covalent complex of a zinc protease. As anticipated by Rasnick and Powers, the inhibitor alkylates Glu-143 in the thermolysin active site, and the hydroxamic acid moiety coordinates the zinc ion. The formation of the covalent complex is associated with a significant shift in a segment of the polypeptide backbone in the vicinity of the active site. This conformational adjustment appears to be necessary to relieve steric hindrance which would otherwise prevent alkylation of Glu-143. It is suggested that this steric hindrance, which occurs for thermolysin but would not be expected for carboxypeptidase A, accounts for the previously inexplicable difference in reactivity of these two metalloproteases toward N-haloacetyl amino acids. The relevance of this steric hindrance to the mechanism of catalysis is discussed. In agreement with previous results [Kester, W. R., & Matthews, B. W. (1977) Biochemistry 16, 2506-2516], it appears that steric hindrance prevents the direct attack of Glu-143 on the carbonyl carbon of an extended substrate, therefore ruling out the anhydride pathway in thermolysin-catalyzed hydrolysis of polypeptide substrates and their ester analogues.

Binding Sites↗