Biomedical subjects

D G Kilburn

Publications and source records attributed to D G Kilburn.

At least 19 recordsLinked to original sources

PubMed2001

Recognition of cello-oligosaccharides by a family 17 carbohydrate-binding module: an X-ray crystallographic, thermodynamic and mutagenic study.

The crystal structure of the Clostridium cellulovorans carbohydrate-binding module (CBM) belonging to family 17 has been solved to 1.7 A resolution by multiple anomalous dispersion methods. CBM17 binds to non-crystalline cellulose and soluble beta-1,4-glucans, with a minimal binding requirement of cellotriose and optimal affinity for cellohexaose. The crystal structure of CBM17 complexed with cellotetraose solved at 2.0 A resolution revealed that binding occurs in a cleft on the surface of the molecule involving two tryptophan residues and several charged amino acids. Thermodynamic binding studies and alanine scanning mutagenesis in combination with the cellotetraose complex structure allowed the mapping of the CBM17 binding cleft. In contrast to the binding groove characteristic of family 4 CBMs, family 17 CBMs appear to have a very shallow binding cleft that may be more accessible to cellulose chains in non-crystalline cellulose than the deeper binding clefts of family 4 CBMs. The structural differences in these two modules may reflect non-overlapping binding niches on cellulose surfaces.

Alanine↗

PubMed2001

beta-1,3-Glucan binding by a thermostable carbohydrate-binding module from Thermotoga maritima.

The C-terminal 155 amino acids of the putative laminarinase, Lam16A, from T. maritima comprise a highly thermostable family 4 CBM that binds beta-1,3- and beta-(1,3)(1,4)-glucans. Laminarin, a beta-1,3-glucan, presented two classes of binding sites for TmCBM4-2, one with a very high affinity (3.5 x 10(7) M(-1)) and one with a 100-fold lower affinity (2.4 x 10(5) M(-1)). The affinities for laminarioligosaccharides and beta-(1,3)(1,4)-glucans ranged from approximately 2 x 10(5) to approximately 2.5 x 10(6) M(-1). Cellooligosaccharides and laminariobiose were bound only very weakly (K(a)s approximately 5 x 10(3) M(-1)). Spectroscopic and mutagenic studies implicated the involvement of three tryptophan residues (W28, W58, and W99) and one tyrosine residue (Y23) in ligand binding. Binding was enthalpically driven and associated with large negative changes in heat capacity. Temperature and osmotic conditions profoundly influenced binding. For the first time in solution, the direct uptake and release of water in CBM binding are demonstrated.

Amino Acid Motifs↗

PubMed2001

Glycosylation by Pichia pastoris decreases the affinity of a family 2a carbohydrate-binding module from Cellulomonas fimi: a functional and mutational analysis.

When produced by Pichia pastoris, three of the five Asn-Xaa-Ser/Thr sequences (corresponding to Asn-24, Asn-73 and Asn-87) in the carbohydrate-binding module CBM2a of xylanase 10A from Cellulomonas fimi are glycosylated. The glycans are of the high-mannose type, ranging in size from GlcNAc(2)Man(8) to GlcNAc(2)Man(14). The N-linked glycans block the binding of CBM2a to cellulose. Analysis of mutants of CBM2a shows that glycans on Asn-24 decrease the association constant (K(a)) for the binding of CBM2a to bacterial microcrystalline cellulose approx. 10-fold, whereas glycans on Asn-87 destroy binding. The K(a) of a mutant of CBM2a lacking all three N-linked glycosylation sites is the same when the polypeptide is produced by either Escherichia coli or P. pastoris and is approx. half that of wild-type CBM2a produced by E. coli.

Actinomycetales↗

PubMed2001

Binding specificity and thermodynamics of a family 9 carbohydrate-binding module from Thermotoga maritima xylanase 10A.

The C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima (CBM9-2) binds to amorphous cellulose, crystalline cellulose, and the insoluble fraction of oat spelt xylan. The association constants (K(a)) for adsorption to insoluble polysaccharides are 1 x 10(5) to 3 x 10(5) M(-1). Of the soluble polysaccharides tested, CBM9-2 binds to barley beta-glucan, xyloglucan, and xylan. CBM9-2 binds specifically to the reducing ends of cellulose and soluble polysaccharides, a property that is currently unique to this CBM. CBM9-2 also binds glucose, xylose, galactose, arabinose, cellooligosaccharides, xylooligosaccharides, maltose, and lactose, with affinities ranging from 10(3) M(-1) for monosaccharides to 10(6) M(-1) for disaccharides and oligosaccharides. Cellooligosaccharides longer than two glucose units do not bind with improved affinity, indicating that cellobiose is sufficient to occupy the entire binding site. In general, the binding reaction is dominated by favorable changes in enthalpy, which are partially compensated by unfavorable entropy changes.

Amino Acid Motifs↗

PubMed2001

Crystal structures of the family 9 carbohydrate-binding module from Thermotoga maritima xylanase 10A in native and ligand-bound forms.

The C-terminal module of the thermostable Thermotoga maritima xylanase 10A (CBM9-2) is a family 9 carbohydrate-binding module that binds to amorphous and crystalline cellulose and a range of soluble di- and monosaccharides as well as to cello and xylo oligomers of different degrees of polymerization [Boraston, A. B., Creagh, A. L., Alam, Md. M., Kormos, J. M., Tomme, P., Haynes, C. A., Warren, R. A. J., and Kilburn, D. G. (2001) Biochemistry 40, 6240-6247]. The crystal structure of CBM9-2 has been determined by the multiwavelength anomalous dispersion method to 1.9 A resolution. CBM9-2 assumes a beta-sandwich fold and contains three metal binding sites. The bound metal atoms, which are most likely calcium cations, are in an octahedral coordination. The crystal structures of CBM9-2 in complex with glucose and cellobiose were also determined in order to identify the sugar-binding site and provide insight into the structural basis for sugar binding by CBM9-2. The sugar-binding site is a solvent-exposed slot sufficient in depth, width, and length to accommodate a disaccharide. Two tryptophan residues are stacked together on the surface of the protein forming the sugar-binding site. From the complex structures with glucose and cellobiose, it was inferred that CBM9-2 binds exclusively to the reducing end of mono-, di-, and oligosaccharides with an intricate hydrogen-bonding network involving mainly charged residues, as well as stacking interactions by Trp175 and Trp71. The binding interactions are limited to disaccharides as was expected from calorimetric data. Comparison of the glucose and cellobiose complexes revealed surprising differences in binding of these two substrates by CBM9-2. Cellobiose was found to bind in a distinct orientation from glucose, while still maintaining optimal stacking and electrostatic interactions with the reducing end sugar.

Amino Acid Sequence↗

PubMed2001

A family 2a carbohydrate-binding module suitable as an affinity tag for proteins produced in Pichia pastoris.

The family 2a carbohydrate-binding module (CBM), Cel5ACBM2a, from the C-terminus of Cel5A from Cellulomonas fimi, and Xyn10ACBM2a, the family 2a CBM from the C-terminus of Xyn10A from C. fimi, were compared as fusion partners for proteins produced in the methylotrophic yeast Pichia pastoris. Gene fusions of murine stem-cell factor (SCF) with both CBMs were expressed in P. pastoris. The secreted SCF-Xyn10ACBM2a polypeptides were highly glycosylated and bound poorly to cellulose. In contrast, fusion of SCF to Cel5ACBM2a, which lacks potential N-linked glycosylation sites, resulted in the production of polypeptides which bound tightly to cellulose. Cloning and expression of these CBM2a in P. pastoris without a fusion partner confirmed that N-linked glycosylation at several sites was responsible for the poor cellulose binding. The nonglycosylated CBMs produced in E. coli had very similar cellulose-binding properties.

Amino Acid Sequence↗

PubMed2001

Expression analysis of a modified factor X in stably transformed insect cell lines.

A modified Factor X protein was combined with a cellulose-binding domain tag and expressed in insect cell lines. The protein, CBDFX, was expressed and secreted into the medium. Stable, transformed Hi5 and Sf9 insect cell lines were generated and tested for production of secreted CBDFX. The highest Sf9 and Hi5 CBDFX-producing cell lines were scaled up to 2-liter fermentors to evaluate production of this recombinant protein. Secreted protein production levels reached 4 mg/liter for the stable, transformed Hi5 cell line and 18 mg/liter for the stable, transformed Sf9 cell line. The protein was properly processed as determined by amino terminal sequencing and bound well to the cellulose substrate Avicel. In addition the activated recombinant CBDFX(a) was capable of recognizing and efficiently processing a Factor X cleavage site.

Animals↗

PubMed2001

Do cellulose binding domains increase substrate accessibility?

This article provides an overview of various theories proposed during the past five decades to describe the enzymatic hydrolysis of cellulose highlighting the major shifts that these theories have undergone. It also describes the effect of the cellulose-binding domain (CBD) of an exoglucanase/xylanase from bacterium Cellulomonas fimi on the enzymatic hydrolysis of Avicel. Pretreatment of Avicel with CBDCex at 4 and 37 degrees C as well as simultaneous addition of CBDCex to the hydrolytic enzyme (Celluclast, Novo, Nordisk) reduced the initial rate of hydrolysis owing to irreversible binding of CBD proteins to the substrate's binding sites. Nonetheless, near complete hydrolysis was achieved even in the presence of CBDCex. Protease treatment of both pure and CBDCex-treated Avicel reduced the substrates' hydrolyzability, perhaps owing to proteolysis of the hydrolyzing enzyme (Celluclast) by the residual Proteinase K remaining in the substrate. Better protocols for complete removal of CBD proteins from the substrate need to be developed to investigate the effect of CBD adsorption on cellulose digestibility.

Binding Sites↗

PubMed2000

A novel mechanism of xylan binding by a lectin-like module from Streptomyces lividans xylanase 10A.

The C-terminal module of xylanase 10A from Streptomyces lividans is a family 13 carbohydrate-binding module (CBM13). CBM13 binds mono- and oligo-saccharides with association constants of approximately 1x10(2) M(-1)-1x10(3) M(-1). It appears to be specific only for pyranose sugars. CBM13 binds insoluble and soluble xylan, holocellulose, pachyman, lichenan, arabinogalactan and laminarin. The association constant for binding to soluble xylan is (6.2+/-0. 6)x10(3)/mol of xylan polymer. Site-directed mutation indicates the involvement of three functional sites on CBM13 in binding to soluble xylan. The sites are similar in sequence, and are predicted to have similar structures, to the alpha, beta and gamma sites of ricin toxin B-chain, which is also in family 13. The affinity of a single binding site on CBM13 for soluble xylan is only approximately (0. 5+/-0.1)x10(3)/mol of xylan. The binding of CBM13 to soluble xylan involves additive and co-operative interactions between the three binding sites. This mechanism of binding has not previously been reported for CBMs binding polysaccharides. CBM13 is the first bacterial module from family 13 to be described in detail.

Amino Acid Sequence↗

PubMed2000

Specificity and affinity of substrate binding by a family 17 carbohydrate-binding module from Clostridium cellulovorans cellulase 5A.

The C-terminal carbohydrate-binding module (CBM17) from Clostridium cellulovorans cellulase 5A is a beta-1,4-glucan binding module with a preference for soluble chains. CBM17 binds to phosphoric acid swollen Avicel (PASA) and Avicel with association constants of 2.9 (+/-0.2) x 10(5) and 1.6 (+/-0.2) x 10(5) M(-1), respectively. The capacity values for PASA and Avicel were 11.9 and 0.4 micromol/g of cellulose, respectively. CBM17 did not bind to crystalline cellulose. CBM17 bound tightly to soluble barley beta-glucan and the derivatized celluloses HEC, EHEC, and CMC. The association constants for binding to barley beta-glucan, HEC, and EHEC were approximately 2.0 x 10(5) M(-1). Significant binding affinities were found for cello-oligosaccharides greater than three glucose units in length. The affinities for cellotriose, cellotetraose, cellopentaose, and cellohexaose were 1.2 (+/-0.3) x 10(3), 4.3 (+/-0.4) x 10(3), 3.8 (+/-0.1) x 10(4), and 1.5 (+/-0.0) x 10(5) M(-1), respectively. Fluorescence quenching studies and N-bromosuccinimide modification indicate the participation of tryptophan residues in ligand binding. The possible architecture of the ligand-binding site is discussed in terms of its binding specificity, affinity, and the participation of tryptophan residues.

Amino Acid Motifs↗

PubMed2000

Binding site analysis of cellulose binding domain CBD(N1) from endoglucanse C of Cellulomonas fimi by site-directed mutagenesis.

Endoglucanase C (CenC), a beta1,4 glucanase from the soil bacterium Cellulomonas fimi, binds to amorphous cellulose via two homologous cellulose binding domains, termed CBD(N1) and CBD(N2). In this work, the contributions of 10 amino acids within the binding cleft of CBD(N1) were evaluated by single site-directed mutations to alanine residues. Each isolated domain containing a single mutation was analyzed for binding to an insoluble amorphous preparation of cellulose, phosphoric acid swollen Avicel (PASA), and to a soluble glucopyranoside polymer, barley beta-glucan. The effect of any given mutation on CBD binding was similar for both substrates, suggesting that the mechanism of binding to soluble and insoluble substrates is the same. Tyrosines 19 and 85 were essential for tight binding by CBD(N1) as their replacement by alanine results in affinity decrements of approximately 100-fold on PASA, barley beta-glucan, and soluble cellooligosaccharides. The tertiary structures of unbound Y19A and Y85A were assessed by heteronuclear single quantum coherence (HSQC) spectroscopy. These studies indicated that the structures of both mutants were perturbed but that all perturbations are very near to the site of mutation.

Alanine↗

PubMed2000

The cultivation of animal cells at controlled dissolved oxygen partial pressure. Reprinted from Biotechnology and Bioengineering Vol. X, Issue 6, Pages 801-814 (1968).

A 3-liter culture vessel has been developed for the growth of animal cells in suspension at controlled pH and dissolved oxygen partial pressure (pO(2)). The culture technique allows metabolically produced CO(2) to be measured; provision can be made to control the dissolved CO(2) partial pressure. In cultures containing a low serum concentration, gas sparging to control pO(2) was found to cause cell damage. This could be prevented by increasing the serum concentration to 10%, or by adding 0.02% of the surface-active polymer Pluronic F68. The growth of mouse LS cells in batch culture without pO(2) control was found to be limited by the availability of oxygen. Maximum viable cell populations were obtained when dissolved pO(2) was controlled at values within the range 40-100 mm Hg.

Animals↗

PubMed2000

Mannanase Man26A from Cellulomonas fimi has a mannan-binding module.

A modular mannanase (Man26A) from the bacterium Cellulomonas fimi contains a mannan-binding module (Man26Abm) that binds to soluble but not to insoluble mannans. Man26Abm does not bind to cellulose, chitin or xylan. The K(d) for binding of Man26Abm to locust bean gum (LBG) is approximately 0.2 microM. Man26A is the first mannanase reported to contain a mannan-binding module.

Amino Acid Sequence↗

PubMed2000

Factor X fusion proteins: improved production and use in the release in vitro of biologically active hirudin from an inactive alpha-factor-hirudin fusion protein.

Many recombinant proteins are synthesized as fusion proteins containing affinity tags to aid in the downstream processing. After purification, the affinity tag is often removed by using a site-specific protease such as factor Xa (FXa). However, the use of FXa is limited by its expense and availability from plasma. To develop a recombinant source of FXa, we have expressed two novel forms of FXa using baby hamster kidney (BHK) cells as host and the expression vector pNUT. The chimeric protein FIIFX consisted of the prepropeptide and the Gla domain of prothrombin linked to the activation peptide and protease region of FXa, together with a cellulose-binding domain (CBD(Cex)) as an affinity tag. A second variant consisted of the transferrin signal peptide linked to the second epidermal growth factor-like domain and the catalytic domain of FX and a polyhistidine tag. Both FX variants were secreted into the medium, their affinity tags were functional, and following activation, both retained FXa-specific proteolytic activity. However, the yield of the FIIFX-CBD(Cex) fusion protein was 10-fold higher than that of FX-CBD(Cex) and other forms of recombinant FX reported to date. The FXa derivatives were used to cleave two different fusion proteins, including a biologically inactive alpha-factor-hirudin fusion protein secreted by Saccharomyces cerevisiae. After cleavage, the released hirudin demonstrated biological activity in a thrombin inhibition assay, suggesting that this method may be applicable to the production of toxic or unstable proteins. The availability of novel FX derivatives linked to different affinity tags allows the development of a versatile system for processing fusion proteins in vitro.

Amino Acid Sequence↗

PubMed2000

Analysis of binding of the family 2a carbohydrate-binding module from Cellulomonas fimi xylanase 10A to cellulose: specificity and identification of functionally important amino acid residues.

The family 2a carbohydrate-binding module (CBM2a) of xylanase 10A from Cellulomonas fimi binds to the crystalline regions of cellulose. It does not share binding sites with the N-terminal family 4 binding module (CBM4-1) from the cellulase 9B from C.fimi, a module that binds strictly to soluble sugars and amorphous cellulose. The binding of CBM2a to crystalline matrices is mediated by several residues on the binding face, including three prominent, solvent-exposed tryptophan residues. Binding to crystalline cellulose was analyzed by making a series of conservative (phenylalanine and tyrosine) and non-conservative substitutions (alanine) of each solvent-exposed tryptophan (W17, W54 and W72). Other residues on the binding face with hydrogen bonding potential were substituted with alanine. Each tryptophan plays a different role in binding; a tryptophan is essential at position 54, a tyrosine or tryptophan at position 17 and any aromatic residue at position 72. Other residues on the binding face, with the exception of N15, are not essential determinants of binding affinity. Given the specificity of CBM2a, the structure of crystalline cellulose and the dynamic nature of the binding of CBM2a, we propose a model for the interaction between the polypeptide and the crystalline surface.

Actinomycetales↗

PubMed1999

Relationship between recombinant activated protein C secretion rates and mRNA levels in baby hamster kidney cells.

Analysis of 12 baby hamster kidney (BHK) clones in exponential growth revealed a linear relationship between cell-specific recombinant activated protein C (APC) production rates and APC mRNA levels. This correlation indicated that mRNA levels limited APC productivity. Two strategies were employed to increase APC mRNA levels and APC productivity. First, sodium butyrate was added to increase mRNA levels by two- to sixfold in five APC-producing clones to obtain up to 2.7-fold increase in APC production rate. The second strategy was to retransfect an APC-producing BHK cell line with a vector containing additional APC cDNA and a mutant DHFR. This mutant DHFR gene allowed the selection of retransfected clones in higher MTX concentrations. Over two-fold higher mRNA levels were obtained in these retransfected clones and the cell-specific APC production rate increased twofold. At the highest level of APC secretion, increases in mRNA levels did not result in higher rates of APC production. Analysis of the intracellular APC content revealed a possible saturation in the secretory pathway at high mRNA levels. The relation between mRNA level and APC secretion rate was also investigated in batch culture. The levels of total cellular RNA, APC mRNA, and beta-actin mRNA were relatively stable while cells were in the exponential growth phase, but rapidly decreased when cells reached the stationary phase. The decline of cell-specific APC mRNA levels correlated with a decline in APC secretion rates, which indicated that the mRNA levels continued to limit the rates beyond the exponential phase and into the declining growth and stationary phases of batch APC production.

Animals↗

PubMed1999

Concentration-dependent internalization of a cytokine/cytokine receptor complex in human hematopoietic cells.

Soluble steel factor (SF) is a potent stimulator of hematopoietic progenitor cell proliferation in vitro, and cytokine combinations that include SF can support extensive expansions of hematopoietic cells. Recently, we showed that very primitive progenitor cells from normal human bone marrow require exposure to very high concentrations of cytokines to maintain their primitive status while proliferating. These cells also display higher cell-specific cytokine uptake rates than more differentiated types of hematopoietic cells. As a first step toward identifying the mechanisms involved in mediating such cytokine dose-dependent effects, we have now investigated the kinetics of SF receptor (c-kit) internalization by human Mo7e cells exposed to different extracellular concentrations of soluble SF. Transfer of Mo7e cells to a higher concentration of SF caused an initially rapid downregulation of cell surface c-kit which was accompanied by a rapid depletion of extracellular SF. Confocal microscopy showed a concomitant increase in the number and intensity of intracellular c-kit aggregates. After the first 30 min, the cells continued to deplete SF from the medium but at a much slower rate. During this period, there was a gradual recovery of expression of c-kit on the cell surface. A mathematical analysis of bulk medium to cell-surface SF-mass transport indicated that the cytokine-depletion rates measured were not likely to have significantly depleted the SF concentration in the microenvironment of the cells. Taken together, these results underscore the importance of monitoring and appropriately regulating cytokine concentrations in hematopoietic cell expansion cultures. They may also help to explain the different biological responses exhibited by primitive hematopoietic cells exposed to different types and concentrations of cytokines for periods of days.

Animals↗

PubMed1999

Cellulose as an inert matrix for presenting cytokines to target cells: production and properties of a stem cell factor-cellulose-binding domain fusion protein.

A chimaera of stem cell factor (SCF) and a cellulose-binding domain from the xylanase Cex (CBDCex) effectively immobilizes SCF on a cellulose surface. The fusion protein retains both the cytokine properties of SCF and the cellulose-binding characteristics of CBDCex. When adsorbed on cellulose, SCF-CBDCex is up to 7-fold more potent than soluble SCF-CBDCex and than native SCF at stimulating the proliferation of factor-dependent cell lines. When cells are incubated with cellulose-bound SCF-CBDCex, activated receptors and SCF-CBDCex co-localize on the cellulose matrix. The strong binding of SCF-CBDCex to the cellulose surface permits the effective and localized stimulation of target cells; this is potentially significant for long-term perfusion culturing of factor-dependent cells. It also permits the direct analysis of the effects of surface-bound cytokines on target cells.

Animals↗