PubMed HealthSearch

Biomedical subjects

D J Galas

Publications and source records attributed to D J Galas.

18 recordsLinked to original sources

Functional organization of the ends of IS1: specific binding site for an IS 1-encoded protein.

The IS 1-encoded protein InsA binds specifically to both ends of IS1, and acts as a repressor of IS1 gene expression and may be a direct inhibitor of the transposition process. We show here, using DNasel 'foot-printing' and gel retardation, that the InsA binding sites are located within the 24/25 bp minimal active ends of IS1 and that InsA induces DNA bending upon binding. Conformational modification of the ends of IS1 as a result of binding of the host protein integration host factor (IHF) to its site within the minimal ends has been previously observed. Using a collection of synthetic mutant ends we have mapped some of the nucleotide sequence requirements for InsA binding and for transposition activity. We show that sequences necessary for InsA binding are also essential for transposition activity. We demonstrate that InsA and IHF binding sites overlap since some sequence determinants are shared by both InsA and IHF. The data suggest that these ends contain two functional domains: one for binding of InsA and IHF, and the other for transposition activity. A third region, when present, may enhance transposition activity with an intact right end. This 'architecture' of the ends of IS1 is remarkably similar to that of IS elements IS10, IS50 and IS903.

Bacterial Proteins

A simple method for site-directed mutagenesis using the polymerase chain reaction.

We have developed a general and simple method for directing specific sequence changes in a plasmid using primed amplification by the polymerase chain reaction (PCR). The method is based on the amplification of the entire plasmid using primers that include the desired changes. The method is rapid, simple in its execution, and requires only minute amounts of plasmid template DNA. It is significant that there are no special requirements for appropriately placed restriction sites in the sequence to be manipulated. In our system the yield of transformants was high and the fraction of them harboring plasmids with only the desired change was consistently about 80%. The generality of the method should make it useful for the direct alteration of most cloned genes. The only limitation may be the total length of the plasmid to be manipulated. During the study we found that the Taq DNA polymerase used for PCR adds on a single extra base (usually an A) at the end of a large fraction of the newly synthesized chains. These had to be removed by the Klenow fragment of DNA polymerase to insure restoration of the gene sequence.

Base Sequence

Mutational analysis of the open reading frames in the transposable element IS1.

IS1 is one of the smallest transposable elements found in bacteria (768 bp). It contains eight overlapping open-reading-frames (ORFs) greater than 50 codons, designated insA to insG and insB'. To determine which of the ORFs actually code for proteins involved in transposition, we have introduced amber codons into each ORF by site-directed mutagenesis which make neutral changes in the overlapping ORFs. Each mutant IS1 was then tested for its ability to mediate cointegrate formation in Su+ and Su- backgrounds. The mutant elements were also tested for trans-complementation in an IS1-free Salmonella background. Our results show that the products of the insA and insB genes are the only ones essential for cointegrate formation. We suggest that other ORFs may, however, encode accessory proteins.

Amino Acid Sequence

Escherichia coli integration host factor binds specifically to the ends of the insertion sequence IS1 and to its major insertion hot-spot in pBR322.

We report here that the ends of IS1 are bound and protected in vitro by the heterodimeric protein integration host factor (IHF). Under identical conditions, RNA polymerase binds to one of these ends (IRL) and protects a region that includes the sequences protected by IHF. Other potential sites within IS1, identified by their homology to the apparent consensus sequence, are not protected. Footprinting analysis of deletion derivatives of the ends demonstrates a correspondence between the ability of the end sequence to bind IHF and its ability to function as an end in transposition. Nonetheless, some transposition occurs in IHF- cells, indicating that IHF is not an essential component of the transposition apparatus. IHF also binds and protects four closely spaced regions within the major hot-spot for insertion of IS1 in the plasmid pBR322. This striking correlation of hot-spot and IHF-binding sites suggests a possible role for IHF in IS1 insertion specificity.

Bacterial Proteins

Escherichia coli integration host factor bends the DNA at the ends of IS1 and in an insertion hotspot with multiple IHF binding sites.

The integration host factor of Escherichia coli (IHF) is a small, histone-like protein which participates in the integration of bacteriophage lambda into the E. coli chromosome and in a number of regulatory processes. Our recent footprinting analysis has shown that IHF binds specifically to the ends of the transposable element IS1, as well as to several sites within a short segment of the plasmid pBR322. We have extended our studies of the binding of the IHF molecule to these sites in vitro using a gel retardation assay. We report here that IHF bends the DNA upon binding, as judged from the strong cyclic dependence of the protein-induced mobility shift on the position of the binding site. Using cloned, synthetic ends of IS1 as substrates, we have found that some mutations within the conserved bases of the IHF consensus binding sequence abolish binding, and that alterations of the flanking sequences can greatly reduce IHF binding. The presence of multiple IHF sites on a single DNA fragment increases binding very little, indicating that IHF does not bind cooperatively in this complex. We discuss the possibility that DNA bending is related to the role IHF plays in forming and stabilizing nucleoprotein complexes, and suggest that bending at the IHF sites may be important to its diverse effects in the cell.

Bacterial Proteins

Expression of proteins essential for IS1 transposition: specific binding of InsA to the ends of IS1.

The insertion sequence IS1 displays a complex array of open reading frames (ORF). In an attempt to identify those which encode polypeptide products, we have systematically placed each ORF under the control of the P1 promoter of phage lambda. In the expression system we used, only the product of the insA gene was present in high enough amounts to be detected by polyacrylamide gel electrophoresis. The production of InsA was further increased in a first codon hook-up to phage T7 transcriptional and translational initiation signals. Cell extracts from InsA overproducers display a DNA binding activity specific for the ends of IS1. This activity was identified as the InsA protein itself.

Amino Acid Sequence

Artificial transposable elements in the study of the ends of IS1.

We have constructed artificial IS1-based transposons by attaching synthetic oligodeoxynucleotides, corresponding to the sequence of the ends of IS1, to a selectable DNA segment ['omega' fragment; Prentki and Krisch, Gene 29 (1984) 303-313]. These transposons were used to examine the sequence requirements at the ends for IS1 transposition. We show here that a 24- to 28-bp sequence from the left or right ends of IS1 is capable of transposition when present at both ends of the omega fragment in the correct orientation. Transposition activity requires the presence of an intact IS1 in cis on the same plasmid molecule. In trans, however, neither resident genomic copies of IS1, nor copies carried by a compatible, high-copy-number plasmid present in the same cell, complement the artificial transposons efficiently. Transposition frequencies in the presence of a cis-complementing IS1 are, however, similar to those of the naturally occurring IS1-based transposon, Tn9. In addition, transposition results in a 9-bp duplication in the target DNA molecule as is usually the case for insertion of the intact IS1. Using this system, we have obtained evidence indicating that the activity of a synthetic IS1 end is not determined exclusively by its sequence, but can be strongly enhanced by a second, wild-type end used in the transposition event. The data also show that single base pair mutations can exhibit a cumulative effect in reducing transposition activity.

Base Sequence

Functional promoters created by the insertion of transposable element IS1.

We have isolated several insertions of the transposable element IS1 into the proximal promoter (P3) of the beta-lactamase gene of plasmid pBR322, which do not abolish resistance to ampicillin. Using a transcription termination module (omega), we have shown that the gene can be expressed from hybrid promoters, created by the insertion of IS1. The terminal inverted repeats of IS1 carry sequences partially homologous to the "-35" consensus region. Splicing either of these sequences to the existing "-10" region of the beta-lactamase promoter by transposition of IS1 at the proper distance results in the formation of an active hybrid promoter. This interpretation was confirmed by transcription studies in vitro. Gene expression from the hybrid promoters was found to be less efficient than from P3. However, the orientation of IS1 that contributes a "-35" with the greater homology to the known "-35" consensus sequence is significantly more efficient than the other. In addition, we were able to assign a strong determinant of IS1 polarity to a 254 base-pair internal segment of IS1. An examination of the ends of many insertion sequences leads us to expect that the phenomenon described here may occur with several of these transposable elements, and may have an unexpected evolutionary significance.

Base Sequence

Error induction and correction by mutant and wild type T4 DNA polymerases. Kinetic error discrimination mechanisms.

The fidelity of DNA synthesis as determined by the misincorporation of the base analogue 2-aminopurine in competition with adenine has been measured as a function of deoxynucleoside triphosphate substrate concentrations using purified mutator (L56), antimutator (L141), and wild type (T4D) T4 DNA polymerases. Although the rates of both incorporation and turnover of aminopurine and adenine decrease as substrate concentrations are decreased, the ratio of turnover/polymerase activity is increased. Thus, the nuclease/polymerase ratio of each of these three DNA polymerases can be controlled. The misincorporation of aminopurine decreases with decreasing substrate concentrations such that all three enzymes approach nearly identical misincorporation frequencies at the lowest substrate concentration. The increased accuracy of DNA synthesis corresponds to conditions producing a high nuclease/polymerase ratio. The misinsertion frequency for aminopurine is independent of substrate concentrations and enzyme phenotype; therefore, the increased accuracy of DNA synthesis with decreasing substrate concentrations is shown to be a result of increased nuclease activity and not increased polymerase or nuclease specificity. The data are analyzed in terms of a kinetic model of DNA polymerase accuracy which proposes that discrimination in nucleotide insertion and removal is based on the free energy difference between matched and mismatched base pairs. A value of 1.1 kcal/mol free energy difference, delta G, between adenine: thymine and aminopurine:thymine base pairs is predicted by model analysis of the cocentration dependence of aminopurine misincorporation and removal frequencies. An independent estimate of this free energy difference based on the 6-fold higher apparent Km of T4 DNA polymerase for aminopurine compared to adenine also gives a value of 1.1 kcal/mol. It is shown that the aminopurine misinsertion frequency for an enzyme having either extremely low 3'-exonuclease activity, Escherichia coli DNA polymerase I, or no measurable exonuclease activity, calf thymus DNA polymerase alpha, is 12 to 15%, which is similar to that for the T4 polymerases and consistent with delta G approximately 1.1 kcal/mol.

2-Aminopurine

The interaction of RNA polymerase and lac repressor with the lac control region.

We have examined the interactions of lac repressor and RNA polymerase with the DNA of the lac control region, using a method for direct visualization of the regions of DNA protected by proteins from DNAase attack. The repressor protects the operator essentially as reported by Gilbert and Maxam (1) with some small modifications. However, the evidence reported here concerning the binding of RNA polymerase to the DNA of the promoter mutant UV5 indicates that : 1) the RNA polymerase molecule binds asymmetrically to the promoter DNA, 2) RNA polymerase protects DNA sequences to within a few bases of the CAP binding site, suggesting direct interaction between polymerase and the CAP protein at this site, 3) RNA polymerase still binds to the promoter when repressor is bound to the operator, but fails to form the same extensive complex.

Base Sequence

DNAse footprinting: a simple method for the detection of protein-DNA binding specificity.

A method for studying the sequence-specific binding of proteins to DBA is described. The technique is a simple conjoining of the Maxam-Gilbert DNA-sequencing method and the technique of DNAase-protected fragment isolation. Fragments of a 5' end-labelled, double-stranded DNA segment, partially degraded by DNAase in the presence and absence of the binding protein, are visualized by electrophoresis and autoradiography alongside the base-specific reaction products of the Maxam-Gilbert sequencing method. It is then possible to see the protective "footprint" of the binding protein on the DNA sequence. The binding of lac repressor to lac operator is visualized by "footprinting" as an example. Equillibrium estimates indicate that 10-fold sequence-specificity (differential binding constant) could be studied easily using this technique.

Autoradiography