PubMed Health⌕ Search

Biomedical subjects

D J Manstein

Publications and source records attributed to D J Manstein.

At least 37 records · Page 2Linked to original sources
PubMed1997

Dictyostelium discoideum myosin II: characterization of functional myosin motor fragments.

The transient kinetic properties of the recombinant myosin head fragments M761 and M781, which both lack the light chain binding domain (LCBD) and correspond to the first 761 and 781 residues of Dictyostelium discoideum myosin II, were compared with those of the subfragment 1-like fragment M864 and a shorter catalytic domain fragment M754. The properties of M761, M781, and M864 are almost identical in regard to nucleotide binding, nucleotide hydrolysis, actin binding, and the interactions between actin and nucleotide binding sites. Only the rate of the hydrolysis step was significantly faster for M761 and the affinity of M781 for actin significantly weaker than for M864. This indicates that the LCBD plays no major role in the biochemical behavior of the myosin head. In contrast, loss of the peptide between 754 and 761 produced several major changes in the property of M754 as documented previously [Woodward, S. K. A., Geeves, M. A., & Manstein, D. J. (1995) Biochemistry 34, 16056-16064]. We further show that C-terminal extension of M761 with one or two alpha-actinin repeats has very little effect on the behavior of the protein. The recombinant nature of M761 and the fact that it can be produced and purified in large amounts make it an ideal construct for systematic studies of the structure, kinetics, and function of the myosin motor.

Actins↗
PubMed1996

Myosin motors with artificial lever arms.

The myosin head consists of a globular catalytic domain and a light chain binding domain (LCBD). The coupling efficiency between ATP hydrolysis and myosin-induced actin movement is known to decline as the LCBD is truncated or destabilized. However, it was not clear whether the observed alteration in the production of force and movement reflects only the mechanical changes to the length of the LCBD or whether these changes also affect the kinetic properties of the catalytic domain. Here we show that replacement of the LCBD with genetically engineered domains of similar rigidity and dimensions produces functional molecular motors with unchanged kinetic properties. The resulting single-chain, single-headed motors were produced in Dictyostelium discoideum and obtained after purification from a standard peptone-based growth medium at levels of up to 12 mg/l. Their actin motility properties are similar or greater than those of native myosin. Rates of 2.5 and 3.3 microm/s were observed for motor domains fused to one or two of these domains, respectively. Their kinetic and functional similarity to the extensively studied myosin subfragment 1 (S1) and their accessibility to molecular genetic approaches makes these simple constructs ideal models for the investigation of chemo-mechanical coupling in the myosin motor.

Actin Cytoskeleton↗
PubMed1995

Kinetic characterization of the catalytic domain of Dictyostelium discoideum myosin.

The myosin head consists of a globular motor or catalytic domain that contains both the catalytic and actin binding sites, and a neck region which consists of a 8.5 nm alpha-helix that emerges from the globular part of the heavy chain and is stabilized by the binding of the essential and regulatory light chains. High levels of M754, a recombinant polyhistidine-tagged catalytic domain-like fragment of myosin II, were produced in Dictyostelium discoideum and purified using a rapid extraction protocol and metal chelate chromatography. Approximately 1.2 mg of homogeneous, functional protein was obtained per gram of cells. Kinetic analysis of M754 showed that the recombinant protein still has all the typical properties of a myosin ATPase. However, the removal of the light chain domain does have a pronounced effect on enzymatic activity. Nucleotide on-rates are 7-16-fold slower for M754 than for a myosin head fragment that includes the neck region. In contrast, the rate of ATP binding and dissociating the actin-bound catalytic domain is 10-fold increased. Overall the results indicate that the truncation of the heavy chain affects the nucleotide binding site and the communication between the nucleotide and actin binding sites. Furthermore, it seems that the nucleotide site of M754 is not fully formed but binding to actin or ATP stabilizes the structure in general and the nucleotide binding site in particular.

Adenosine Diphosphate↗
PubMed1995

Cloning vectors for the production of proteins in Dictyostelium discoideum.

We constructed and tested a series of cloning vectors designed to facilitate protein production and purification in Dictyostelium discoideum (Dd). These vectors carry the origin of replication of the Dd high-copy-number plasmid Ddp2, expression cassettes consisting of the strong, constitutive actin (act15) or the inducible discoidin (disI gamma) promoters, a translational start codon upstream from a multiple cloning site and sequences for the addition of epitope or affinity tags at the N- or C-termini of any protein. The affinity tag used corresponds to 7 (N-terminal fusion) or 8 (C-terminal fusion) His residues. The epitope tags correspond to an 11-amino-acid sequence from human c-myc, recognised by monoclonal antibody (mAb) 9E10, and the Glu-Glu-Phe sequence recognised by mAb YL1/2 to alpha-tubulin. Both these mAb are commercially available. The YL1/2 epitope offers a second affinity tag for the purification of proteins under native conditions. The functional competence of the vectors was tested by determining their ability to promote the expression of various Dd myosin constructs. High synthesis levels were obtained for each vector; up to 1 mg of homogenous, functional protein per g of cells was obtained after purification of the recombinant products.

Amino Acid Sequence↗
PubMed1995

Overexpression of myosin motor domains in Dictyostelium: screening of transformants and purification of the affinity tagged protein.

The eukaryotic organism Dictyostelium discoideum has become one of the organisms of choice for the overexpression of recombinant myosins and myosin fragments. Here, we describe a protocol that facilitates the screening of cells that have been transformed with myosin expression constructs and allows the rapid purification of recombinant myosins. Depletion of cellular ATP is used to recruit most of the endogenous and recombinant myosin into a rigor-like complex with actin. Following cell lysis the insoluble actomyosin complex is precipitated by centrifugation, washed, and Mg(2+)-ATP is added to extract the recombinant protein from the pellet. More than 90% of the protein in the resulting supernatant corresponds to actin, myosin, and the recombinant myosin fragments. Therefore, it is easy to detect any differences in expression level between individual myosin constructs on SDS-polyacrylamide gels. Additionally, the dependence of expression on external factors, such as cell density, can be readily determined. Furthermore, the presence of a band corresponding to the recombinant protein indicates that the overexpressed protein has at least some of the functional properties that are characteristic for a myosin motor. This rapid and selective extraction protocol can also be utilized to facilitate the purification of recombinant myosin motors on a preparative scale and has proved particularly useful in the purification of myosin head fragments, that are tagged with histidine residues, by Ni(2+)-chelate affinity chromatography.

Actinin↗
PubMed1993

Kinetic characterization of a cytoplasmic myosin motor domain expressed in Dictyostelium discoideum.

A detailed kinetic study of the interaction of a recombinant myosin head fragment (MHF) of Dictyostelium discoideum with actin and adenine nucleotides has been made by using a combination of rapid-reaction, equilibrium, and fluorescence methods. MHF is equivalent in size to a proteolytic fragment of skeletal muscle myosin, subfragment 1 (S1), the simplest unit of myosin to retain enzymatic and functional activity. The results show that qualitatively the interactions of MHF with nucleotides and actin are the same as those of S1. Both bind to rabbit actin with the same affinity, although differences in the rate constants of their interactions with nucleotides in the presence and absence of actin occur. The rate of ATP binding to MHF and the subsequent cleavage step are significantly slower than the corresponding rates with S1. The dissociation of a fluorescent analog of ADP from MHF was 5-fold faster than from S1, while its rate of binding MHF was 3-fold slower, resulting in a weaker association equilibrium constant. The ATP-induced isomerization of the actoMHF complex was 10-fold slower than for actoS1, but the binding affinities of ADP for actoMHF and actoS1 were indistinguishable. The results suggest a different degree of coupling between the nucleotide and actin binding sites of MHF and S1 which may be a common feature of nonmuscle myosins. They also provide the basis for a study of specifically modified myosins with which one can probe the sites of interaction with nucleotides or actin, as well as functional motility.

Actins↗
PubMed1993

Three-dimensional atomic model of F-actin decorated with Dictyostelium myosin S1.

Elucidation of the molecular contacts between actin and myosin is central to understanding the force-generating process in muscle and other cells. Actin, a highly conserved globular protein found in all eukaryotes, polymerizes into filaments (F-actin) for most of its biological functions. Myosins, which are more diverse in sequence, share a conserved globular head of about 900 amino acids in length (subfragment-1 or S1) at the N-terminal end of the molecule. S1 contains all the elements necessary for mechano-chemical force transduction in vitro. Here we report an atomic model for the actomyosin complex produced by combining the atomic X-ray structure of F-actin and chicken myosin S1 with a three-dimensional reconstruction from electron micrographs of frozen-hydrated F-actin decorated with recombinant Dictyostelium myosin S1. The accuracy of the reconstruction shows the position of actin and myosin molecules unambiguously.

Actins↗
PubMed1993

Myosin function in the motile behaviour of cells.

Cells undergo a wide variety of movements, such as directed locomotion, extension and retraction of cell surface projections, saltatory movement of intracellular particles and cytoplasmic streaming. These events involve changes in the organization and function of cytoskeletal structures that contain actin and myosin. Dictyostelium has proven to be a very useful model system for studying these events. Its actomyosin-based motility resembles that of mammalian cells and has been extensively characterized, from the standpoints both of biochemistry and cell biology. Furthermore, the Dictyostelium cytoskeleton can be specifically altered using gene-targeting and other molecular genetic approaches.

Actins↗
PubMed1991

Manipulation and expression of molecular motors in Dictyostelium discoideum.

The eukaryote Dictyostelium discoideum is an attractive model organism for the study of cytoskeletal proteins and cell motility. The appearance and behavior of this cell closely resembles that of mammalian cells, but unlike mammalian cells, Dictyostelium offers the opportunity specifically to alter the cell physiology by molecular genetic approaches.

Cell Movement↗
PubMed1990

Complementation of myosin null mutants in Dictyostelium discoideum by direct functional selection.

The eukaryotic slime mold Dictyostelium discoideum contains a single conventional myosin heavy chain gene (mhcA). Cell lines in which this gene was deleted via homologous recombination have been previously reported. These myosin null cells were shown to be defective for cytokinesis and for sporogenesis. We demonstrate here that the cloned mhcA gene can be reintroduced into these cells by the use of a direct functional selection. This selection was imposed by demanding that cells be capable of growth in suspension. The resulting transformants appear normal for cytokinesis, and also are fully competent for sporogenesis, confirming that reintroduction of the myosin gene is sufficient to restore these properties. These results demonstrate a method for rescuing mutants in Dictyostelium which may be generally applicable for genetically created mutations as well as for mutations which have been engineered.

Blotting, Southern↗
PubMed1989

Expression and characterization of a functional myosin head fragment in Dictyostelium discoideum.

The isolated head fragment of myosin is a motor protein that is able to use energy liberated from the hydrolysis of adenosine triphosphate to cause sliding movement of actin filaments. Expression of a myosin fragment nearly equivalent to the amino-terminal globular head domain, generally referred to as subfragment 1, has been achieved by transforming the eukaryotic organism Dictyostelium discoideum with a plasmid that carries a 2.6-kilobase fragment of the cloned Dictyostelium myosin heavy chain gene under the control of the Dictyostelium actin-15 promoter. The recombinant fragment of the myosin heavy chain was purified 2400-fold from one of the resulting cell lines and was found to be functional by the following criteria: the myosin head fragment copurified with the essential and regulatory myosin light chains, decorated actin filaments, and displayed actin-activated adenosine triphosphatase activity. In addition, motility assays in vitro showed that the recombinant myosin fragment is capable of supporting sliding movement of actin filaments.

Actins↗
PubMed1989

Gene replacement in Dictyostelium: generation of myosin null mutants.

The eukaryotic slime mold Dictyostelium discoideum has a single conventional myosin heavy chain gene (mhcA). The elimination of the mhcA gene was achieved by homologous recombination. Two gene replacement plasmids were constructed, each carrying the G418 resistance gene as a selective marker and flanked by either 0.7 kb of 5' coding sequence and 0.9 kb of 3' coding sequence or 1.5 kb of 5' flanking sequence and 1.1 kb of 3' flanking sequence. Myosin null mutants (mhcA- cells) were obtained after transformation with either of these plasmids. The mhcA- cells are genetically stable and are capable of a variety of motile processes. Our results provide genetic proof that in Dictyostelium the conventional myosin gene is required for growth in suspension, normal cell division and sporogenesis, and illustrate how gene targeting can be used as a tool in Dictyostelium.

Dictyostelium↗
PubMed1989

Hygromycin resistance as a selectable marker in Dictyostelium discoideum.

We have constructed an expression cartridge which has the bacterial hygromycin resistance gene (hph) fused to the Dictyostelium discoideum actin 15 promoter, with a segment of 3'-flanking DNA from the actin 15 locus placed downstream of the hph gene to serve as a transcription terminator. The plasmid pDE109, which contained this cartridge and a Dictyostelium origin of replication, transformed D. discoideum with high efficiency under hygromycin selection. The availability of this selectable marker circumvents the previous limitation of having G418 resistance as the only selectable marker for this organism; secondary transformation can now be used to introduce DNA into previously transformed cell lines.

Anti-Bacterial Agents↗
PubMed1988

Stereochemistry and accessibility of prosthetic groups in flavoproteins.

Using 8-demethyl-8-hydroxy-5-deaza-5-carba analogues of the appropriate flavin nucleotides, we determined the stereochemistry of interaction between coenzyme and substrate for several flavoproteins. The enzymes were D-amino acid oxidase, L-lactate oxidase, and D-lactate dehydrogenase, all three of which interact with pyruvate, as well as cyclohexanone monooxygenase and 2-methyl-3-hydroxypyridine-5-carboxylic acid oxygenase, which were both probed with nicotinamide nucleotides. L-Lactate oxidase and D-lactate dehydrogenase used the si face of the modified flavin ring while the other three enzymes showed re-side specificity. This selection of flavoenzymes includes FAD- and FMN-dependent enzymes, enzymes that follow a carbanion mechanism, and others that have hydride transfer as an integral part of their reaction pathway.

Apoenzymes↗
PubMed1986

Purification and characterization of FAD synthetase from Brevibacterium ammoniagenes.

The bifunctional enzyme FAD synthetase from Brevibacterium ammoniagenes was purified by a method involving ATP-affinity chromatography. The final preparation was more than 95% pure. The apparent molecular weight of the enzyme was determined as 38,000 and the isoelectric point as 4.6. Although previous attempts to separate the enzymatic activities had failed, ATP:riboflavin 5'-phosphotransferase and ATP:FMN-adenylyltransferase activities in B. ammoniagenes were believed to be located on two separate proteins with similar properties, possibly joined in a complex. The following evidence, however, suggests the presence of both activities on a single polypeptide chain. The two activities copurify in the same ratio through the purification scheme as presented. Only a single band could be detected when aliquots from the final purification step were subjected to sodium dodecyl sulfate-polyacrylamide gel electrophoresis, nondenaturing gel electrophoresis, and isoelectric focusing. Edman degradation of the protein yielded a single N-terminal sequence.

Brevibacterium↗
PubMed1986

Absolute stereochemistry of flavins in enzyme-catalyzed reactions.

The 8-demethyl-8-hydroxy-5-deaza-5-carba analogues of FMN and FAD have been synthesized. Several apoproteins of flavoenzymes were successfully reconstituted with these analogues. This and further tests established that these analogues could serve as general probes for flavin stereospecificity in enzyme-catalyzed reactions. The method used by us involved stereoselective introduction of label on one enzyme combined with transfer to and analysis on a second enzyme. Using as a reference glutathione reductase from human erythrocytes for which the absolute stereochemistry of catalysis is known from X-ray studies [Pai, E. F., & Schulz, G. E. (1983) J. Biol. Chem. 258, 1752-1758], we were able to determine the absolute stereospecificities of other flavoenzymes. We found that glutathione reductase (NADPH), general acyl-CoA dehydrogenase (acyl-CoA), mercuric reductase (NADPH), thioredoxin reductase (NADPH), p-hydroxybenzoate hydroxylase (NADPH), melilotate hydroxylase (NADH), anthranilate hydroxylase (NADPH), and glucose oxidase (glucose) all use the re face of the flavin ring when interacting with the substrates given in parentheses.

Acyl-CoA Dehydrogenases↗
PubMed1986

Ultrastructure of native lipoprotein from Escherichia coli envelopes.

The free form of the major lipoprotein from Escherichia coli cells envelopes has been purified to homogeneity by gentle extraction procedures and conventional chromatographic separations in a non-ionic detergent. The morphology of paracrystals obtained from homogeneous protein was investigated by low-dose electron microscopy. Electron diffraction of the paracrystals was consistent with alpha-helices arranged perpendicularly to the main cross-band with a periodicity of 20 nm.

Bacterial Outer Membrane Proteins↗