PubMed Health⌕ Search

Biomedical subjects

D J Nicholls

Publications and source records attributed to D J Nicholls.

16 recordsLinked to original sources

Tetrameric malate dehydrogenase from a thermophilic Bacillus: cloning, sequence and overexpression of the gene encoding the enzyme and isolation and characterization of the recombinant enzyme.

The gene encoding the tetrameric malate dehydrogenase (MDH) in a thermophilic Bacillus species (BI) has been cloned in an Escherichia coli plasmid. The nucleotide sequence of the gene, the first to be elucidated for a tetrameric MDH, shows the MDH subunit to contain 312 amino acids and have a molecular mass of 33648 Da, which confirms the experimentally determined value of about 35 kDa. Like the genomic DNA of BI, the MDH gene is relatively AT-rich; this contrasts with the generally GC-rich nature of the DNA of thermophilic Bacillus species. Comparison of amino acid sequences reveals that BI MDH bears greater structural similarity to lactate dehydrogenases (LDHs) than to other (dimeric) MDHs. MDHs and LDHs resemble each other in catalytic mechanism and several other respects. However, whereas MDHs in the majority of organisms are dimers, the tetrameric structure is favoured among LDHs. The stronger structural resemblance that BI MDH has to LDHs than to the dimeric MDHs provides some explanation as to why Bacillus MDH, unlike most other MDHs, is tetrameric. A 1 kb fragment containing the BI MDH gene, produced in a PCR, has been cloned into a high-expression E. coli plasmid vector. BI MDH synthesized from this clone constitutes about 47% of the total protein in cell extracts of the E. coli strain carrying the clone. MDH purified from BI and that purified from the E. coli strain carrying the MDH gene clone appear to be identical proteins by several criteria. A number of characteristics of the MDH have been elucidated, including the molecular masses of the native enzyme and the subunit, N-terminal amino acid sequence, isoelectric point, pH optimum for activity, thermostability, stability to pH, urea and guanidinium chloride and several kinetic parameters. Whereas the MDH is a stable tetramer in the pH range 5-7, it appears to be converted into a stable dimer at pH 3.5. This suggests that the dimer is a stable intermediate in the dissociation of the tetramer to monomers at low pH.

Amino Acid Sequence↗

Catalytic-rate improvement of a thermostable malate dehydrogenase by a subtle alteration in cofactor binding.

The nucleotide-binding fold of many NAD(+)-dependent dehydrogenases contains a conserved acidic amino acid residue which hydrogen-bonds with the 2'- and 3'-hydroxy groups of the adenine-ribose of the cofactor. This residue is highly conserved as aspartate in malate dehydrogenases, except in the thermophilic enzyme from Thermus aquaticus B (TaqMDH), which has glutamic acid-41 in the equivalent position. The catalytic mechanism was dissected to investigate the functional significance of this difference in TaqMDH with respect to a mutant enzyme where glutamic acid-41 was replaced by aspartic acid. The mutant enzyme was found to retain a high degree of protein structural stability to both thermal and chemical denaturation. When compared with the wild-type enzyme the mutant had a higher Km and Kd for both reduced and oxidized cofactors (NADH and NAD+) and a 2-3-fold increase in steady-state kcat in both assay directions. The rate-determining step for the reduction of oxaloacetate by wild-type TaqMDH was shown to be the rate of NAD+ release, which was about 2.5-fold higher for the mutant enzyme. This correlates well with the 1.8-fold higher steady-state kcat of the mutant enzyme and represents an improvement in the steady-state kcat of a thermophilic enzyme at moderate temperature by a conservative amino acid substitution which increases the rate of product release.

Aspartic Acid↗

Erwinia chrysanthemi L-asparaginase: epitope mapping and production of antigenically modified enzymes.

This study shows that the antigenicity of Erwinia chrysanthemi L-asparaginase can be reduced by site-directed mutagenesis. Ten B-cell epitopes of the enzyme were identified using synthetic hexapeptides and polyclonal antisera from rabbits and mice. The region 282GIVPPDEELP292 near the C-terminus was an immunodominant epitope. Binding of two hexapeptides (283IVPPDE288 and 287DEELPG292) to the antibodies was dependent on Pro285, and Pro286, since their replacement by almost any other amino acid resulted in reduced binding. The other residues were less important for binding the antibodies, as binding was relatively unaffected by amino acid substitutions. Three site-directed mutant enzymes, P285T (proline-285-->threonine etc.), P286Q and E288A, were expressed in Escherichia coli. The purified enzymes had subunit M(r) values of 35,000. The pI values of P285T, P286Q and the wild-type enzymes were 8.6, and that for the mutant E288A was 9.2. The kcat. and Km values for the mutants P286Q and E288A with L-asparagine and L-glutamine were comparable with those of the wild-type enzyme. The Km values for the mutant P285T with both substrates was similar to that of the wild-type enzyme, whereas the kcat. was reduced by 2-fold with L-asparagine and by 4-fold with L-glutamine. The change proline-->threonine reduced the antigenicity of the enzyme by 8-fold, as shown in sandwich e.l.i.s.a.s. using monoclonal antibodies raised against the wild-type enzyme.

Amino Acid Sequence↗

A single amino acid mutation enhances the thermal stability of Escherichia coli malate dehydrogenase.

The stability of wild-type Escherichia coli malate dehydrogenase was compared with a mutant form of the enzyme with the amino acid residue at position 102 changed from arginine to glutamine. The mutation occurs on the underside of a mobile loop which closes over the active-site cleft on formation of the enzyme/cofactor/substrate ternary complex. The mutant enzyme is kinetically compromised while the wild-type enzyme is highly specific for oxaloacetate. The mutant enzyme was shown to be more resistant to irreversible thermal denaturation by thermal inactivation experiments and high-sensitivity differential scanning calorimetry than the wild-type enzyme. In contrast, resistance of both enzymes to reversible unfolding in guanidinium chloride was similar. Circular dichroic spectropolarimetry shows the secondary structures of the enzymes are similar but there is a demonstrable difference in tertiary structure. From the position of the mutation, it is conjectured that the substitution on a mobile surface loop results in partial closure of the loop and greater resistance to thermal inactivation of the mutant enzyme. However, molecular modelling combined with circular dichroic spectropolarimetry indicate that the mutation may have a more widespread effect on the structure than simply partial closure of the mobile surface loop as the environment of distant tyrosine residues is altered. Resistance of the wild-type enzyme to thermal inactivation can be increased by cofactor addition, which may have the effect of partial closure of the mobile surface loop, but has little effect on the mutant enzyme.

Arginine↗

Contribution of a buried aspartate residue towards the catalytic efficiency and structural stability of Bacillus stearothermophilus lactate dehydrogenase.

The X-ray structure of lactate dehydrogenase (LDH) shows the side-chain carboxylate group of Asp-143 to be buried in the hydrophobic interior of the enzyme, where it makes hydrogen-bonding interactions with both the side-chain hydroxyl group of Ser-273 and the main-chain amide group of His-195. This is an unusual environment for a carboxylate side-chain as hydrogen bonding normally occurs with water molecules at the surface of the protein. A charged hydrogen-bonding interaction in the interior of a protein would be expected to be much stronger than a similar interaction on the solvent-exposed exterior. In this respect the side-chain carboxylate group of Asp-143 appears to be important for maintaining tertiary structure by providing a common linkage point between three discontinuous elements of the secondary structure, alpha 1F, beta K and the beta-turn joining beta G and beta H. The contribution of the Asp-143 side-chain to the structure and function of Bacillus stearothermophilus LDH was assessed by creating a mutant enzyme containing Asn-143. The decreased thermal stability of both unactivated and fructose-1,6-diphosphate (Fru-1,6-P2)-activated forms of the mutant enzyme support a structural role for Asp-143. Furthermore, the difference in stability of the wild-type and mutant enzymes in guanidinium chloride suggested that the carboxylate group of Asp-143 contributes at least 22 kJ/mol to the conformational stability of the wild-type enzyme. However, there was no alteration in the amount of accessible tryptophan fluorescence in the mutant enzyme, indicating that the mutation caused a structural weakness rather than a gross conformational change. Comparison of the wild-type and mutant enzyme steady-state parameters for various 2-keto acid substrates showed the mutation to have a general effect on catalysis, with an average difference in binding energy of 11 kJ/mol for the transition-state complexes. The different effects of pH and Fru-1,6-P2 on the wild-type and mutant enzymes also confirmed a perturbation of the catalytic centre in the mutant enzyme. As the side-chain of Asp-143 is not sufficiently close to the active site to be directly involved in catalysis or substrate binding it is proposed that the effects on catalysis shown by the mutant enzyme are induced either by a structural change or by charge imbalance at the active site.(ABSTRACT TRUNCATED AT 400 WORDS)

Aspartic Acid↗

Malate dehydrogenase: a model for structure, evolution, and catalysis.

Malate dehydrogenases are widely distributed and alignment of the amino acid sequences show that the enzyme has diverged into 2 main phylogenetic groups. Multiple amino acid sequence alignments of malate dehydrogenases also show that there is a low degree of primary structural similarity, apart from in several positions crucial for nucleotide binding, catalysis, and the subunit interface. The 3-dimensional structures of several malate dehydrogenases are similar, despite their low amino acid sequence identity. The coenzyme specificity of malate dehydrogenase may be modulated by substitution of a single residue, as can the substrate specificity. The mechanism of catalysis of malate dehydrogenase is similar to that of lactate dehydrogenase, an enzyme with which it shares a similar 3-dimensional structure. Substitution of a single amino acid residue of a lactate dehydrogenase changes the enzyme specificity to that of a malate dehydrogenase, but a similar substitution in a malate dehydrogenase resulted in relaxation of the high degree of specificity for oxaloacetate. Knowledge of the 3-dimensional structures of malate and lactate dehydrogenases allows the redesign of enzymes by rational rather than random mutation and may have important commercial implications.

Amino Acid Sequence↗

Substitution of the amino acid at position 102 with polar and aromatic residues influences substrate specificity of lactate dehydrogenase.

The Gln residue at amino acid position 102 of Bacillus stearothermophilus lactate dehydrogenase was replaced with Ser, Thr, Tyr, or Phe to investigate the effect on substrate recognition. The Q102S and Q102T mutant enzymes were found to have a broader range of substrate specificity (measured by kcat/Km) than the wild-type enzyme. However, it is evident that either Ser or Thr at position 102 are of a size able to accommodate a wide variety of substrates in the active site and substrate specificity appears to rely largely on size discrimination in these mutants. The Q102F and Q102Y mutant enzymes have low catalytic efficiency and do not show this relaxed substrate specificity. However, their activities are restored by the presence of an aromatic substrate. All of the enzymes have a very low catalytic efficiency with branched chain aliphatic substrates.

Amino Acid Sequence↗

An investigation of the thermal stabilities of two malate dehydrogenases by comparison of their three-dimensional structures.

The tertiary structure of Thermus aquaticus malate dehydrogenase (MDH) was predicted based on the known crystal structure of pig heart cytosolic MDH. Guanidinium chloride (GdmCl) unfolding experiments showed that there is only about a 4.2-kjoule/mol difference in delta G 0 between the pig and Thermus MDH. However, the two enzymes varied greatly in their [GdmCl]1/2, with Thermus MDH showing the expected increased stability (3.20 M against 0.58 M for pig MDH). The half-lives were determined for both Thermus MDH (34 min at 90 degrees C) and pig MDH (1.8 min at 60 degrees C). The Thermus MDH model was then examined to see what effect the substituted residues and changes may have on the enzyme, particularly in relation to its high thermal stability.

Amino Acid Sequence↗

Dissecting the contributions of a specific side-chain interaction to folding and catalysis of Bacillus stearothermophilus lactate dehydrogenase.

X-ray crystallography predicts hydrogen-bonding interactions between the side chains of Thr198 and two other amino acid residues, Glu194 (adjacent to the catalytic His195) and Ser318 (on the alpha-H helix which rearranges on substrate binding). In order to investigate the contribution of this conserved amino acid residue, Thr198, two mutants of Bacillus stearothermophilus lactate dehydrogenase were created (Val198 and Ile198). The steady-state kinetic parameters for both mutant enzymes were very similar with increased substrate Km and reduced kcat when compared with the wild-type enzyme. The mutation Val198 allowed non-productive binding of pyruvate to the unprotonated form of His195. Steady-state kinetic parameters determined for the Val198 mutant enzyme in high solvent viscosity suggested both an altered rate-limiting step in catalysis and implicated Thr198 in allosteric activation by the effector fructose 1,6-bisphosphate (Fru1,6P2). A shift in the Fru1,6P2 activation constant for the Val198 mutant enzyme suggested that Thr198 stabilises the catalytically competent (Fru1,6P2-activated) form of the enzyme by 6.6 kJ/mol. However, Thr198 was not important for maintaining the thermal stability of the Fru1,6P2-activated form. Equilibrium unfolding in guanidinium chloride indicated that Thr198 contributes 17.2 kJ/mol subunits towards the tertiary structural stability. The results emphasise the importance of the side chain-hydroxyl group of Thr198 which is required for (a) productive substrate binding, (b) allosteric activation and (c) protein conformational stability. The characteristics of the B. stearothermophilus lactate dehydrogenase mutations reported here were significantly different from those of the same mutations made in the corresponding position of the analogous enzyme Thermus flavus malate dehydrogenase [Nishiyama, M., Shimada, K., Horinouchi, S., & Beppu, T. (1991) J. Biol. Chem. 266, 14294-14299].

Base Sequence↗

The importance of arginine 102 for the substrate specificity of Escherichia coli malate dehydrogenase.

The malate dehydrogenase from Escherichia coli has been specifically altered at a single amino acid residue by using site-directed mutagenesis. The conserved Arg residue at amino acid position 102 in the putative substrate binding site was replaced with a Gln residue. The result was the loss of the high degree of specificity for oxaloacetate. The difference in relative binding energy for oxaloacetate amounted to about 7 kcal/mol and a difference in specificity between oxaloacetate and pyruvate of 8 orders of magnitude between the wild-type and mutant enzymes. These differences may be explained by the large hydration potential of Arg and the formation of a salt bridge with a carboxylate group of oxaloacetate.

Amino Acid Sequence↗

Cloning and overexpression of Lactobacillus helveticus D-lactate dehydrogenase gene in Escherichia coli.

NAD(+)-dependent D-lactate dehydrogenase from Lactobacillus helveticus was purified to apparent homogeneity, and the sequence of the first 36 amino acid residues determined. Using forward and reverse oligonucleotide primers, based on the N-terminal sequence and amino acid residues 220-215 of the Lactobacillus bulgaricus enzyme [Kochhar, S., Hunziker, P. E., Leong-Morgenthaler, P. & Hottinger, H. (1992) J. Biol. Chem. 267, 8499-8513], a 0.6-kbp DNA fragment was amplified from L. helveticus genomic DNA by the polymerase chain reaction. This amplified DNA fragment was used as a probe to identify two recombinant clones containing the D-lactate dehydrogenase gene. Both plasmids overexpressed D-lactate dehydrogenase (greater than 60% total soluble cell protein) and were stable in Escherichia coli, compared to plasmids carrying the L. bulgaricus and Lactobacillus plantarum genes. The entire nucleotide sequence of the L. helveticus D-lactate dehydrogenase gene was determined. The deduced amino acid sequence indicated a polypeptide consisting of 336 amino acid residues, which showed significant amino acid sequence similarity to the recently identified family of D-2-hydroxy-acid dehydrogenases [Kochhar, S., Hunziker, P. E., Leong-Morgenthaler, P. & Hottinger, H. (1992) Biochem. Biophys. Res. Commun. 184, 60-66]. The physicochemical and catalytic properties of recombinant D-lactate dehydrogenase were identical to those of the wild-type enzyme, e.g. alpha 2 dimeric subunit structure, isoelectric pH, Km and Kcat for pyruvate and other 2-oxo-acid substrates. The kinetic profiles of 2-oxo-acid substrates showed some marked differences from that of L-lactate dehydrogenase, suggesting different mechanisms for substrate binding and specificity.

Alcohol Oxidoreductases↗

Overexpression of the Thermus aquaticus B malate dehydrogenase-encoding gene in Escherichia coli.

Expression of the Thermus aquaticus B malate dehydrogenase (MDH)-encoding gene (mdh), cloned in Escherichia coli, was initially at a relatively low level (0.1% of soluble cell protein) and was effected by read-through from the tac promoter in the plasmid vector used. An enhancement in expression to 0.4% of soluble cell protein was achieved by shortening the intervening sequence between the promoter and the translation start codon of mdh. An NdeI restriction site (5'-CAT-ATG-3') was engineered in the shortened fragment, which also changed the start codon from GTG to ATG. This resulted in an eightfold increase in expression, to 3.2% of soluble cell protein. Expression was further increased by subcloning the mdh gene via the engineered NdeI site, into two plasmid expression vectors, one carrying the E. coli trpP promoter and the other the E. coli mdhP promoter. In both these expression systems, 40-50% of the soluble cell protein was T. aquaticus MDH. This suggests that expression of the cloned T. aquaticus mdh in E. coli is enhanced predominantly by the optimisation of transcription and translation initiation signals. Moreover, the base composition of the coding region and the pattern of codon usage dictated by it appear to have little effect on expression. Heat treatment of the cell extract at 85 degrees C further effected purification of T. aquaticus MDH to over 80% of the soluble cell protein. The MDHs purified to homogeneity from the high-expression clones were identical with the MDH isolated from T. aquaticus B cells with respect to all measured parameters.

Base Sequence↗

Cloning and nucleotide sequences of the mdh and sucD genes from Thermus aquaticus B.

A 3 kb DNA fragment containing the gene (mdh) encoding malate dehydrogenase (MDH) from the thermophile Thermus aquaticus B was cloned in Escherichia coli and its nucleotide sequence determined. Comparative analysis showed the nucleotide sequence to be very closely related to that determined for the Thermus flavus mdh gene and flanking regions, with no differences between the predicted amino acid sequences of the MDHs. A proximal open reading frame, identified as the sucD gene, and the mdh gene may be parts of the same operon in T. aquaticus B. Expression of the T. aquaticus B mdh gene in E. coli was found to be at a relatively low level. A simple method for purification of thermostable MDH from the E. coli clone containing the T. aquaticus B mdh gene is presented.

Amino Acid Sequence↗