Biomedical subjects

D J Roser

Publications and source records attributed to D J Roser.

7 recordsLinked to original sources

PubMed2006

Microbial exposure assessment of an urban recreational lake: a case study of the application of new risk-based guidelines.

New WHO and Australian guidelines promote a risk-management approach for minimising exposure to pathogens in recreational waters. Between 2003 and 2005, they were applied to Lake Parramatta (10 ha, 450 ML), a potential recreation site in Sydney, Australia. A three stage approach was developed involving (1) initial suitability assessment using historic data, (2) revised suitability assessment based on new data and (3) characterisation of hazardous (especially wet weather) events. Contrary to the stage 1 suitability classification, stage 2 baseline data indicated that during dry weather the lake had water quality sufficient for primary contact recreation (95th percentiles for enterococci = 19 MPN/100, n = 50) and the major pathogen source was wildfowl. Guideline principles provided a rationale for collecting microbiological and geographic data needed to understand local cycles of lake contamination/recovery. The concept of hazardous events was particularly useful. Studies of stormwater events led us to identify a transition point (> 10 mm rainfall in 24 h) where human-faecal pathogen risks increased and access needed to be controlled. Together baseline and event data yielded operational tools (i.e. event detection methods, action triggers, auditing criteria, remediation priorities) for minimising bather exposure.

Clostridium perfringens↗

PubMed2006

Microbial risk and removal--a utility perspective.

In this paper the results of a sampling programme, undertaken as part of the EU MicroRisk project, are described. This project was undertaken to ascertain the occurrence of pathogens and indicators in the River Thames and their subsequent removal through a treatment works. Appropriate physico-chemical surrogates, as determined by statistical correlation are proposed for the microorganisms identified in the raw water. This study shows that under normal raw water conditions the treatment works is able to remove microbial contamination with a significant margin of safety.

Animals↗

PubMed2005

Quantifying the impact of runoff events on microbiological contaminant concentrations entering surface drinking source waters.

Concentrations of microbiological contaminants in streams increase during rainfall-induced higher flow 'event' periods as compared to 'baseflow' conditions. If the stream feeds a drinking water reservoir, such periods of heightened pathogen loads may pose a challenge to the water treatment plant and subsequently a health concern to water consumers downstream. In order to manage this risk, it is desirable to first quantify the differences in surface water quality between baseflow and event conditions. The Event Mean Concentration (EMC) is a flow-weighted average concentration of a contaminant over the duration of a single event, proposed here as a standard parameter for quantifying the net effect of events on microbial water quality. Application of the EMC concept was assessed using flow and quality data for several events from an urbanised catchment. Expected mean EMCs were significantly larger than expected mean baseflow concentrations (p-value< or =0.012) for three microbial agents - Escherichia coil (13,000 [n = 7] v. 610 [n = 16] mpn/100 ml), Cryptosporidium (234 [n = 6] v. 51 [n = 16] oocysts/10 litres) and Campylobacter (48 [n = 5] v. 2.1 [n = 16] mpn/100ml). These parameter estimates were complemented by estimating data variability and uncertainty in the form of second-order random variables. As such the results are in a format appropriate for potential use as components in probabilistic risk assessments evaluating the effect runoff events have on drinking water quality.

Animals↗

PubMed2005

Effluent quality from 200 on-site sewage systems: design values for guidelines.

The quality of effluent from an on-site sewage treatment system is a critical factor in designing the disposal area and, hence, ensuring the sustained performance of the system. Contaminant concentrations in effluent are typically specified in regulatory guidelines or standards; however, the accuracy of these guideline values are brought into question due to the poor performance of septic tanks and the high failure rates of disposal systems reported here and elsewhere. Results from studies of septic tank effluent quality indicated that the effluent is of poorer quality than currently suggested by guidelines. Aerated wastewater treatment systems were found to perform to accreditation guidelines; however, insufficient nutrient data is presently available to assess nutrient loads. It is proposed that the 80th percentile of system performance be adopted as the design value for sizing effluent disposal areas to minimise failure associated with overloading. For septic tanks this equates to 660 mg L(-1) SS, 330 mg L(-1) BOD, 250 mg L(-1) TN and 36 mg L(-1) TP.

Guidelines as Topic↗

PubMed2005

Hydrogen sulphide production tests and the detection of groundwater faecal contamination by septic seepage.

The 'H2S test' is being advanced for microbiological water quality testing where conventional coliform based methods are impractical or too expensive. It involves ambient temperature incubation of water samples with nutrient formulated to generate hydrogen sulphide when 'faecal' bacteria are present. Recently a WHO review identified several concerns including the limited number of comparative studies, formulation variability, and false positives and negatives. In response we have compared the H2S test's ability to detect and quantify faecal contamination in an aquifer impacted by septic tank leachfields with measurements obtained concurrently using conventional bacterial indicators, coliphages, faecal sterol biomarkers, Cryptosporidium and Giardia. Like these other analytes, H2S testing detected a contamination gradient ranging from high (septic liquid) to moderate (exfiltration zones), to background (e.g. domestic bores), corresponding to indicator removal + dilution by factors > 10(6). Presence/absence tests could not distinguish between heavily and slightly contaminated waters, whereas multi-tube testing (e.g. 10 x 10 mL arrays) did. It was concluded that while the WHO review concerns are justified, the H2S test performance shows promise in sanitary survey work, can be improved by employing an mpn approach and has potential to aid in the protection of source water and identifying contaminated groundwater.

Environmental Monitoring↗

PubMed2004

Assessing the health implications of turbidity and suspended particles in protected catchments.

The supply of unfiltered disinfected drinking water from Melbourne's fully protected catchments means that the water-quality managers must ensure that the source water poses no public health risk. High turbidity is currently used as a surrogate of pathogens, and harvesting of water is based on its measurement. The work presented here summarises suspended particle and associated pathogen, microbial indicator and faecal biomarker concentrations collected to (a) quantify turbidity in an Australian water supply system and (b) assess the possibility of increasing water harvesting from selected tributaries. Pathogens and microbial indicators were present in low numbers in these source waters; increased turbidity during storm events was not associated with an increase in pathogen concentration. The results confirmed that protected catchments, along with good management, were effective barriers to pathogen contamination. Aesthetic issues still need to be addressed, but no measurable increase in microbiological risk was associated with storm-generated particles.

Bacteria↗

PubMed1987

Application of most-probable-number statistics to direct enumeration of microorganisms.

A novel method for rapid determination of total microbial cell numbers was investigated. The method involves the application of most-probable-number estimation statistics to direct microscopic counting of microbial cells by using a particle sizing graticule. Its accuracy and reliability were tested with computer simulations of bacterial cell distributions encountered in ecological studies. Good estimates of cell numbers were obtained when the cell density varied from 3 to 6,000 cells per field, i.e., over 3 orders of magnitude. Low levels of contagion did not markedly influence cell estimates, although high levels, corresponding to discrete scattered microcolonies, did. However, these could be recognized visually. Estimates of cell numbers in Breed smears confirmed its speed and good correlation with the standard quadrat counting technique under real experimental conditions.

Journal Article↗