Insistent and intransigent: a phage Mu enhancer functions in trans.
Explore the source record for details and available documents.
Biomedical subjects
Publications and source records attributed to D J Sherratt.
Explore the source record for details and available documents.
Site-specific recombination reactions bring about controlled rearrangements of DNA molecules by cutting the DNA at precise points and rejoining the ends to new partners. The recombinases that catalyse these reactions can be grouped into two families by amino acid sequence homology. We describe our current understanding of how these proteins catalyse recombination, and show how the catalytic mechanisms of the two families differ.
In site-specific recombination reactions catalyzed by Tn3 resolvase, the right and left arms of the res site are always religated to the correct partner. This poses the problem of how resolvase aligns the two sites correctly for the cleavage/religation reaction. We show that the "accessory" binding subsites II and III of res are important for correct alignment of the adjoining crossover subsite (subsite I). Deletion of subsites II and III from one of the two res sites removes a barrier to recombination between incorrectly aligned crossover subsites. Correct alignment does not require any DNA sequence asymmetry in the crossover subsite, DNA supercoiling, or covalent linkage of the two res sites. Our results suggest that correct subsite I alignment is determined by local, resolvase-mediated interactions of subsites II and III of both partners, consistent with a current model of the synapse. Surprisingly, the topological selectivity for intramolecular resolution in a supercoiled substrate does not require subsites II and III in both recombination partners.
Site-specific recombination at the plasmid ColE1 cer site requires the Escherichia coli chromosomal gene xerC. The xerC gene has been localized to the 85-min region of the E. coli chromosome, between cya and uvrD. The nucleotide sequences of the xerC gene and flanking regions have been determined. The xerC gene encodes a protein with a calculated molecular mass of 33.8 kDa. This protein has substantial sequence similarity to the lambda integrase family of site-specific recombinases and is probably the cer recombinase. The xerC gene is expressed as part of a multicistronic unit that includes the dapF gene and two other open reading frames.
Site-specific recombination catalyzed by Tn3 resolvase proceeds with a linkage change, delta Lk, of +4 in the forward resolution reaction and -4 in the catenane fusion reverse reaction. The reverse reaction occurs only at low superhelical densities and gives unknotted circular products, consistent with plectonemic and not solenoidal wrapping of the two recombination sites. The strand exchange topologies are consistent with a mechanism in which resolvase cleaves all four DNA strands and religates them after a 180 degrees rotation of two duplex partners in a right-handed sense for the "forward" reaction, and in a left-handed sense for the "reverse" action. This could be achieved by a 180 degrees rotation of two resolvase subunits within a tetramer with D2 symmetry; we suggest that a different symmetry applies to phage lamda integrase catalysis.
The heritable stability of ColE1 is dependent on a site-specific recombination system which acts to resolve plasmid multimers into monomers. This plasmid stabilizing recombination system requires the presence in cis of the ColE1 cer region, plus at least two trans-acting factors encoded by the xerA and xerB genes of Escherichia coli. The xerB gene has been cloned and sequenced and found to encode a polypeptide with a calculated mol. wt of 55.3 kd. The predicted amino acid sequence of this protein exhibits striking similarity to that of bovine lens leucine aminopeptidase (53 kd). The biological significance of this similarity is corroborated by genetic and biochemical evidence which suggests that xerB is identical to the E.coli and S.typhimurium pepA genes that encode aminopeptidase A.
A third of the 6.6 kb genome of ColE1 is devoted to mobilization (mob) genes necessary to promote its specific transfer in the presence of conjugative plasmids. The mob region is genetically complex: two mob genes are entirely overlapped by a third. Oligonucleotide-directed mutagenesis was used to insert an amber codon into one of the overlapped genes and make possible a full complementation analysis of mob. Four mob genes essential for mobilization by R64drd11 were thus identified. Fragments of mob were subcloned under control of the Ptac promoter in a suitable vector, overexpressed in minicells and the mobilization proteins visualized. A comprehensive alignment of the mob region of ColE1 with those of its close relatives ColK and ColA demonstrating that the four essential mob genes are conserved is also presented.
Site-specific recombination processes in microbes bring about precise DNA rearrangements which have diverse and important biological functions. The sites and recombinase enzymes used for these processes fall into two distinct families. Here we describe how experiments with one family, exemplified by the resolution system of transposon Tn3, have provided insight into the ways in which DNA and protein interact to bring together distant recombination sites and promote strand exchange.
Escherichia coli mutants completely defective in ColE1 cer-mediated site-specific recombination have been mapped to two genes, xerA and xerB. In this study, xerA xerB double mutants were constructed by gene replacement with a lambda dv plasmid and were shown to be both viable and defective in ColE1 site-specific recombination.
The heritable stability in Escherichia coli of the multicopy plasmid ColE1 and its natural relatives requires that the plasmids be maintained in the monomeric state. Plasmid multimers, that arise through recA-dependent homologous recombination, are normally converted to monomers by a site-specific recombination system that acts at a specific plasmid site (cer in ColE1). No plasmid functions that act at this site have been identified. In contrast, two unlinked E.coli genes that encode functions required for cer-mediated site-specific recombination have been identified. Here we describe the isolation and characterization of one such gene (xerA) and show it to be identical to the gene encoding the repressor of the arginine biosynthetic genes (argR). The argR protein binds to cer DNA both in vivo and in vitro in the presence of arginine. We believe this binding is required to generate a higher order protein-DNA complex within the recombinational synapse. The argR gene of Bacillus subtilis complements an E.coli argR deficiency for cer-mediated recombination despite the two proteins having only 27% amino acid identity.
Plasmid ColE1 specifies a recombination site (cer) which participates in the conversion of plasmid dimers to monomers. The uncontrolled accumulation of dimers (and higher oligomeric forms) would otherwise lead to plasmid instability. Exonuclease III-generated deletions have been used to define the left-hand boundary of the cer site. Deletions which have lost up to 60 bp adjacent to the boundary no longer mediate the conversion of plasmid dimers to monomers, but still recombine with a wild-type site. Although this boundary region is essential for dimer resolution, its DNA sequence is poorly conserved among multimer resolution sites in related plasmids. We present evidence that its function is to influence the three-dimensional organization of the site and suggest that it may be required for the formation of a condensed nucleoprotein complex.
The heritable stability of the multicopy plasmid ColE1 and its natural relatives, requires the presence in the plasmid of a site (cer in ColE1) that acts as a substrate for site-specific recombination, thereby maintaining plasmids in the monomeric state. Multimerization, promoted by homologous recombination, leads to plasmid loss. Here we show that the Escherichia coli chromosome encodes at least two unlinked functions that act on cer and its analogous sites, to promote stabilizing site-specific recombination. One of these functions is encoded by a gene residing on a cosmid that also contains the argI and pyrB genes, mapping it to the 96-97 min region of the E. coli map.
Mobilization of the plasmid ColE1 from cells containing a conjugative plasmid (such as F) requires the synthesis of ColE1 mob proteins, and the presence, in cis, of bom (basis of mobility), a region of ColE1 containing the origin of transfer (oriT). The process of ColE1 transfer is thought to resemble that of the conjugative plasmid F, although the plasmids share little sequence homology. In F, conjugation is preceded by a strand-specific nicking event at oriT. The nicked strand is then conducted to the recipient with the 5' end leading. This is believed also to occur with ColE1, but direct biochemical confirmation has been precluded by its small size (6.65 kb). To test this hypothesis genetically, a novel method, using a lambda dv-based vector, has been devised to site-specifically integrate bom (or any other cloned sequence) into the chromosome of Escherichia coli. When provided with suitable mobilizing plasmids, such strains were found to transfer the chromosome in a polar way. From these data, the orientation of transfer of ColE1 was deduced and shown to be analogous to F.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Sequences essential for the conjugal transfer of ColE1 can be divided into a cis-acting site and a region encoding trans-acting products. Each of these was successively cloned into a non-transmissible plasmid vector. The resulting chimera was transmissible by the conjugative plasmids F'lac,pro (incFI) and R64drd11 (incIalpha). The sequences encoding colicin E1, immunity, and incompatibility were absent from this chimera: therefore they are not essential for the conjugal transmission of the ColE1 plasmid. In contrast to ColE1, however, the same chimera was deficient in conjugal transfer initiated by R751 (incP) and R388 (incW). This suggests that ColE1 sequences other than those cloned in the chimeric plasmid are necessary for its mobilization by R751 and R388. Three such regions were revealed by screening a series of ColE1 insertion mutants for transfer by R751 and R388. Two of these regions encode no other known function while the third is encoded by a region which overlaps the gene for colicin E1 itself.
Explore the source record for details and available documents.
Explore the source record for details and available documents.