D L DeVoe | PubMed Health

PubMed2001

Integration of polymeric membranes with microfluidic networks for bioanalytical applications.

The concept of microfluidics has significantly influenced the design and the implementation of modern bioanalytical systems due to the fact that these miniaturized devices can handle and manipulate samples in a much more efficient way than conventional instruments. In an analogy to the development of microelectronics, increasingly sophisticated devices with greater functionalities have become one of the major goals being pursued in the area of micrototal analysis systems. The incorporation of polymeric membranes into microfluidic networks has therefore been employed in an effort to enhance the functionalities of these microfabricated devices. These commercially available membranes are porous, flexible, mechanically robust and compatible with plastic microfluidic networks. The large surface area-to-volume ratio of porous membrane media is particularly important for achieving rapid buffer exchange during microdialysis and obtaining ultrahigh concentration of adsorbed enzymes for various biochemical reactions. Furthermore, the membrane pore diameter in the sub-microm range eliminates the constraints of diffusional mass-transfer resistance for performing chiral separation using adsorbed protein as the chiral stationary phase. A review on the recent advancement in the integration of polymeric membranes with microfluidic networks is presented for their widespread applications in bioanalytical chemistry.

Adsorption↗

PubMed2001

Field-effect flow control in a polydimethylsiloxane-based microfluidic system.

The application of the field-effect for direct control of electroosmosis in a polydimethylsiloxane (PDMS)-based microfluidic system, constructed on a silicon wafer with a 2.0 microm electrically insulating layer of silicon dioxide, is demonstrated. This microfluidic system consists of a 2.0 cm open microchannel fabricated on a PDMS slab, which can reversibly adhere to the silicon wafer to form a hybrid microfluidic device. Aside from mechanically serving as a robust bottom substrate to seal the channel and support the microfluidic system, the silicon wafer is exploited to achieve field-effect flow control by grounding the semiconductive silicon medium. When an electric field is applied through the channel, a radial electric potential gradient is created across the silicon dioxide layer that allows for direct control of the zeta potential and the resulting electroosmotic flow (EOF). By configuring this microfluidic system with two power supplies at both ends of the microchannel, the applied electric potentials can be varied for manipulating the polarity and the magnitude of the radial electric potential gradient across the silicon dioxide layer. At the same time, the longitudinal potential gradient through the microchannel, which is used to induce EOF, is held constant. The results of EOF control in this hybrid microfluidic system are presented for phosphate buffer at pH 3 and pH 5. It is also demonstrated that EOF control can be performed at higher solution pH of 6 and 7.4 by modifying the silicon wafer surface with cetyltrimethylammonium bromide (CTAB) prior to assembly of the hybrid microfluidic system. Results of EOF control from this study are compared with those reported in the literature involving the use of other microfluidic devices under comparable solution conditions.

Cetrimonium↗