PubMed Health⌕ Search

Biomedical subjects

D L Gutnick

Publications and source records attributed to D L Gutnick.

At least 19 recordsLinked to original sources
PubMed2001

Escherichia coli maltose-binding protein as a molecular chaperone for recombinant intracellular cytoplasmic single-chain antibodies.

Recombinant single-chain antibodies (scFvs) that are expressed in the cytoplasm of cells are of considerable biotechnological and therapeutic potential. However, the reducing environment of the cytoplasm inhibits the formation of the intradomain disulfide bonds that are essential for correct folding and functionality of these antibody fragments. Thus, scFvs expressed in the cytoplasm are mostly insoluble and inactive.Here, we describe a general approach for stabilizing scFvs for efficient functional expression in the cell cytoplasm in a soluble, active form. The scFvs are expressed as C-terminal fusions with the Escherichia coli maltose-binding protein (MBP). We tested a large panel of scFvs that were derived from hybridomas and from murine and human scFv phage display and expression libraries by comparing their stability and functionality as un-fused versus MBP fused proteins. We found that MBP fused scFvs are expressed at high levels in the cytoplasm of E. coli as soluble and active proteins regardless of the redox state of the bacterial cytoplasm. In contrast, most un-fused scFvs can be produced (to much lower levels) in a functional form only when expressed in trxB(-) but not in trxB(+) E. coli cells. We show that MBP-scFv fusions are more stable than the corresponding un-fused scFvs, and that they perform more efficiently in vivo as cytoplasmic intrabodies in E. coli. Thus, MBP seems to function as a molecular chaperone that promotes the solubility and stability of scFvs that are fused to it.

ATP-Binding Cassette Transporters↗
PubMed2000

Engineering bacterial biopolymers for the biosorption of heavy metals; new products and novel formulations.

Bioremediation of heavy metal pollution remains a major challenge in environmental biotechnology. One of the approaches considered for application involves biosorption either to biomass or to isolated biopolymers. Many bacterial polysaccharides have been shown to bind heavy metals with varying degrees of specificity and affinity. While various approaches have been adopted to generate polysaccharide variants altered in both structure and activity, metal biosorption has not been examined. Polymer engineering has included structural modification through the introduction of heterologous genes of the biosynthetic pathway into specific mutants, leading either to alterations in polysaccharide backbone or side chains, or to sugar modification. In addition, novel formulations can be designed which enlarge the family of available bacterial biopolymers for metal-binding and subsequent recovery. An example discussed here is the use of amphipathic bioemulsifiers such as emulsan, produced by the oil-degrading Acinetobacter lwoffii RAG-1, that forms stable, concentrated (70%), oil-in-water emulsions (emulsanosols). In this system metal ions bind primarily at the oil/ water interface, enabling their recovery and concentration from relatively dilute solutions. In addition to the genetic modifications described above, a new approach to the generation of amphipathic bioemulsifying formulations is based on the interaction of native or recombinant esterase and its derivatives with emulsan and other water-soluble biopolymers. Cation-binding emulsions are generated from a variety of hydrophobic substrates. The features of these and other systems will be discussed, together with a brief consideration of possible applications.

Bacteria↗
PubMed1999

Paenibacillus dendritiformis sp. nov., proposal for a new pattern-forming species and its localization within a phylogenetic cluster.

A new strain capable of forming distinctive patterns during colony development was identified by using a combination of phenotypic characterization, fatty acid analysis and analysis of the 16S rRNA gene sequence. The strain formed either a branched, tip-splitting colony morphology (referred to as the T morphotype) or a chiral pattern exhibiting thinner branches with distinctive curling patterns (referred to as the C morphotype). Isolates of the T morphotype exhibited sequence identities greater than 97% to Paenibacillus thiaminolyticus JCM 7540. Phylogenetic analysis placed the T morphotype within the Paenibacillus cluster on a phylogenetic tree. On the basis of unique colony morphology and distinctive phenotypic characteristics, it is proposed that the pattern-forming isolates should be placed within a new species of Paenibacillus, Paenibacillus dendritiformis sp. nov., the type strain of which is T168T (= 30A1T).

Bacillaceae↗
PubMed1998

Cooperative organization of bacterial colonies: from genotype to morphotype.

In nature, bacteria must often cope with difficult environmental conditions. To do so they have developed sophisticated cooperative behavior and intricate communication pathways. Utilizing these elements, motile microbial colonies frequently develop complex patterns in response to adverse growth conditions on hard surfaces under conditions of energy limitation. We employ the term morphotype to refer to specific properties of colonial development. The morphologies we discuss include a tip-splitting (T) morphotype, chiral (C) morphotype, and vortex (V) morphotype. A generic modeling approach was developed by combining a detailed study of the cellular behavior and dynamics during colonial development and invoking concepts derived from the study of pattern formation in nonliving systems. Analysis of patterning behavior of the models suggests bacterial processes whereby communication leads to self-organization by using cooperative cellular interactions. New features emerging from the model include various models of cell-cell signaling, such as long-range chemorepulsion, short-range chemoattraction, and, in the case of the V morphotype, rotational chemotaxis. In this regard, pattern formation in microorganisms can be viewed as the result of the exchange of information between the micro-level (the individual cells) and the macro-level (the colony).

Bacteria↗
PubMed1995

Detection of alpha/beta-hydrolase fold in the cell surface esterases of Acinetobacter species using an analysis of 3D profiles.

The primary sequence of esterases from Acinetobacter lwoffii RAG-1 and A. calcoaceticus BD413 were compared with linearized structural sequences of two hundred proteins selected from Brookhaven Protein DataBank using a modified version of the Bowie et al. algorithm [3]. Significant structural homology was found to alpha/beta proteins and specifically to those with the alpha/beta-hydrolase fold for which the crystal structure was reported. No such homology was detected using common primary sequence alignment programs such as FASTA or BLAST.

Acinetobacter↗
PubMed1994

A role for exopolysaccharides in the protection of microorganisms from desiccation.

Mucoid strains of Escherichia coli, Acinetobacter calcoaceticus, and Erwinia stewartii were significantly more resistant to desiccation than corresponding isogenic nonmucoid mutants (survival rates of up to 35% in mucoid strains and between 0.7 and 5% in nonmucoid variants), even in colonies containing both cell types. Desiccation was found to bring about an induction of beta-galactosidase in Lon strains of E. coli K-12 carrying transcriptional lac fusions in the capsule biosynthetic (cps) regulon. This induction was dependent on the transcriptional activators RcsA and RcsB. Induction was lower in cells carrying mutations in the membrane sensor protein RcsC.

Journal Article↗
PubMed1993

Esterase from the oil-degrading Acinetobacter lwoffii RAG-1: sequence analysis and over-expression in Escherichia coli.

The est gene encoding an esterase from Acinetobacter lwoffii RAG-1 was cloned into E. coli under the control of the PL promoter of the phage lambda. The N-terminal sequence of the first 20 amino acids of the heterologous expressed esterase corresponded to that obtained from the nucleotide sequence. Antibodies prepared against the over-expressed recombinant esterase in E. coli were used to locate the enzyme primarily in the membrane fractions of A. lwoffii RAG-1. Comparison with homologous proteins from both eukaryotic and prokaryotic organisms suggest that the RAG-1 esterase exhibits sequence motifs characteristic of both serine proteases and of lipases.

Acinetobacter↗
PubMed1993

Isolation, characterization, and sequence analysis of cryptic plasmids from Acinetobacter calcoaceticus and their use in the construction of Escherichia coli shuttle plasmids.

Three cryptic plasmids have been discovered in Acinetobacter calcoaceticus BD413. These three plasmids, designated pWM10 (7.4 kb), pWM11 (2.4 kb), and pWM12 (2.2 kb), exhibited extensive homology to one another, as shown by Southern blot hybridization and restriction site analysis data, and also hybridized with three plasmids having slightly different sizes detected in a second strain, A. calcoaceticus BD4. Plasmid pWM11 and a fragment of pWM10 were each subcloned into pUC19, yielding plasmids pWM4 and pWM6, respectively, and were used in a series of inter- and intraspecies transformation experiments. Both plasmids replicated as high-copy-number plasmids in A. calcoaceticus BD413, as well as in strains of Escherichia coli. However, when transformed into the oil-degrading strain Acinetobacter lwoffii RAG-1, both plasmids were maintained at low copy numbers. No modification of the plasmids was detected after repeated transfers between hosts. An analysis of a series of deletions demonstrated that (i) a 185-bp fragment of pWM11 was sufficient to permit replication of the shuttle plasmid in A. calcoaceticus BD413, (ii) the efficiency of transformation of A. calcoaceticus BD413 decreased according to the size of the deletion in the insert by up to 4 orders of magnitude, and (iii) the entire insert was required for transformation and replication in A. lwoffii RAG-1. The sequence of pWM11 contained several small (150- to 300-bp) open reading frames, none of which exhibited any homology to known DNA or protein sequences. In addition, a number of inverted and direct repeats, as well as six copies of the consensus sequence AAAAAAATA previously described for a cryptic plasmid from A. lwoffii (M. Hunger, R. Schmucker, V. Kishan, and W. Hillen, Gene 87:45-51, 1990), were detected. Cloning and expression of the alcohol dehydrogenase regulon from A. lwoffii RAG-1 were accomplished by using the Acinetobacter shuttle plasmid.

Acinetobacter calcoaceticus↗
PubMed1989

Cloning and expression in Escherichia coli of an esterase-coding gene from the oil-degrading bacterium Acinetobacter calcoaceticus RAG-1.

A putative esterase gene (est) from Acinetobacter calcoaceticus RAG-1 has been cloned into Escherichia coli. Esterase-positive clones exhibited high levels of esterase activity even in intact cells. In addition, expression of the est gene conferred on E. coli the ability to grow on simple triglycerides such as triacetin (TAC). The original esterase-positive plasmid pRA17 carried a 2.2-kb insert from a partial MboI digest of RAG-1 DNA, which gave a single band with RAG-1 DNA following Southern hybridization. By subcloning and sequencing the est gene was found to contain a sequence of 870 bp which could be translated to yield a protein of Mr 32,700. In support of the sequencing results was the finding that when pRA17 was expressed in minicells, a unique peptide of Mr 32,500 was identified. This peptide was not found in minicells transformed with esterase-negative plasmids, such as pRA176, which contained a Tn5 insertion in the est gene. The fact that the production of active esterase depended on the orientation of the est gene within the vector suggested that transcription proceeded from the tet promoter in pBR322.

Acinetobacter↗
PubMed1989

Effect of emulsan on biodegradation of crude oil by pure and mixed bacterial cultures.

Crude oil was treated with purified emulsan, the heteropolysaccharide bioemulsifier produced by Acinetobacter calcoaceticus RAG-1. A mixed bacterial population as well as nine different pure cultures isolated from various sources was tested for biodegradation of emulsan-treated and untreated crude oil. Biodegradation was measured both quantitatively and qualitatively. Recovery of CO(2) from mineralized C-labeled substrates yielded quantitative data on degradation of specific compounds, and capillary gas chromatography of residual unlabeled oil yielded qualitative data on a broad spectrum of crude oil components. Biodegradation of linear alkanes and other saturated hydrocarbons, both by pure cultures and by the mixed population, was reduced some 50 to 90% after emulsan pretreatment. In addition, degradation of aromatic compounds by the mixed population was reduced some 90% in emulsan-treated oil. In sharp contrast, aromatic biodegradation by pure cultures was either unaffected or slightly stimulated by emulsification of the oil.

Journal Article↗
PubMed1987

Involvement of a plasmid in growth on and dispersion of crude oil by Acinetobacter calcoaceticus RA57.

A crude-oil-degrading Acinetobacter species, Acinetobacter calcoaceticus RA57, was isolated by standard enrichment culture techniques on the basis of its ability to utilize the oily sludge found in the vicinity of a local gas station. Strain RA57 was found to contain four plasmids: pSR1 (5.1 kilobases [kb]), pSR2 (5.4 kb), pSR3 (10.5 kb), and pSR4 (20 kb). Both supercoiled and open circular forms of the first three plasmids were identified by two-dimensional gel electrophoresis. Restriction endonuclease analysis of pSR4 demonstrated that the plasmid contained a circular map. Colonies were isolated at random after growth in the presence of acridine orange and found to fall into two categories: (i) those which had lost the ability to grow on and disperse crude oil in liquid culture and concurrently were cured of pSR4 and (ii) those which retained the ability to both grow on and disperse crude oil and which contained pSR4. Strains from the first class continued to grow on hydrocarbon vapors, indicating that the defect associated with the curing of pSR4 was related to the physical interaction of the cells with the hydrocarbon substrate, rather than to its metabolism. No differences in either adherence to hydrocarbons or production of extracellular emulsifying activity were found between the two classes of mutants. In growth experiments on crude oil in mixed culture with strains which either contained or lacked pSR4, no sparing of the growth defect was observed. The results are consistent with the possibility that pSR4 encodes a factor(s) which is tightly associated with the cell surface.

Acinetobacter↗
PubMed1986

Enhanced emulsan production in mutants of Acinetobacter calcoaceticus RAG-1 selected for resistance to cetyltrimethylammonium bromide.

Mutants of Acinetobacter calcoaceticus RAG-1 that produced elevated levels of the polymeric bioemulsifier emulsan were isolated on the basis of their resistance to the cationic surfactant cetyltrimethylammonium bromide (CTAB). Such mutants showed maximum enhancement in both overall yield and specific productivity of some two- to threefold over that of the wild type. In addition, the effect was also observed in a resting cell system in the presence of chloramphenicol, indicating that the mutation is not simply the result of faster growth. When CTAB-tolerant mutants were subjected together with the sensitive parent to the detergent under growing conditions, only the mutants were found to grow. The results suggest that the mutation for CTAB resistance leads to enhanced capsule production. This was confirmed quantitatively by a specific enzyme-linked immunosorbent assay for the cell-bound emulsan minicapsule.

Acinetobacter↗
PubMed1985

Tolerance of Acinetobacter calcoaceticus RAG-1 to the cationic surfactant cetyltrimethylammonium bromide: role of the bioemulsifier emulsan.

Emulsan, the polyanionic heteropolysaccharide bioemulsifier produced by Acinetobacter calcoaceticus RAG-1, was found to enhance the tolerance of RAG-1 cells to the toxic effects of the cationic detergent cetyltrimethylammonium bromide (CTAB). Emulsan-mediated tolerance was obtained with the purified deproteinated apoemulsan; ca. 9 micrograms of apoemulsan neutralized 1 microgram of CTAB. Deesterified apoemulsan was only half as effective in protecting the cells from CTAB toxicity. Tolerance was also mediated by the cell-associated emulsan minicapsule. Mutants lacking this capsule were more sensitive to CTAB than the corresponding parent. The growth of mutants and parent cells in mixed-culture experiments demonstrated that the cell-associated polymer mediates CTAB tolerance in the early stages of growth. Once sufficient cell-free polymer has been released into the aqueous medium (ca. 0.5 micrograms/ml), this extracellular emulsan also plays a role in CTAB tolerance.

Acinetobacter↗
PubMed1985

Exocellular esterase and emulsan release from the cell surface of Acinetobacter calcoaceticus.

An esterase activity has been found, both in the cell-free growth medium and on the cell surface of the hydrocarbon-degrading Acinetobacter calcoaceticus RAG-1. The enzyme catalyzed the hydrolysis of acetyl and other acyl groups from triglycerides and aryl and alkyl esters. Emulsan, the extracellular heteropolysaccharide bioemulsifier produced by strain RAG-1, was also a substrate for the enzyme. Gel filtration showed that the cell-free enzyme was released from the cell surface either emulsan free or associated with the bioemulsifier. The partially purified enzyme was found to interact specifically with the esterified fully active emulsan, but not with the deesterified polymer. A role for esterase in emulsan release from the cell surface was indicated when the enzyme was preferentially depleted from the cell surface under conditions in which emulsan was not released. Such cells lost the capacity to release the biopolymer.

Acinetobacter↗
PubMed1983

Immunochemical identification of the major cell surface agglutinogen of Acinetobacter calcoaceticus RAG-92.

The immunochemical and immunocytochemical characteristics of three Acinetobacter calcoaceticus RAG strains were compared in order to clarify the relationship between antibody-induced agglutination and the production of polyanionic extracellular emulsifier (termed emulsan). In addition to the parent, RAG-92, two mutant strains were examined: (1) a non-agglutinating emulsan-producer (AB15), and (2) an agglutinating mutant (16TLU) defective in the production of emulsan. A combined genetic-immunochemical approach was employed. This included the comparison of crossed immunoelectrophoresis patterns of parent and mutant supernates and the effect of absorption of anti-whole cell antiserum with mutant cells. In addition, agglutinability and competition studies were performed as well as electron microscopic cytochemistry. The results demonstrated that three major antigenic components were associated with the cell surface and the supernate. Mutant cells were altered both in their cell surface properties and in their extracellular products. One antigenic component, termed component C3, was the major cell surface agglutinogen; this component was absent in non-agglutinating mutants. Component C3 may be identical with or attached to the 300 nm projections on the parent cell surface, but it is not directly related to the presence of emulsan. It appears that emulsan plays little or no role in the phenomenon of antibody-induced agglutination of this organism.

Acinetobacter↗
PubMed1983

Localization of emulsan-like polymers associated with the cell surface of acinetobacter calcoaceticus.

Various immunochemical techniques were employed to probe the relationship between the extracellular emulsifying agent (emulsan) and the cell-associated form of the polymer in Acinetobacter calcoaceticus RAG-1. Using an emulsan-specific antibody preparation, immunocytochemical labeling revealed that an emulsan-like antigen is a major component of the 125-nm minicapsule which envelopes the exponential-phase cell of the parent strain. The marked reduction of this capsule in stationary-phase cells was correlated with the production of extracellular emulsifying activity. Crossed immunoelectrophoresis techniques demonstrated that the major antigenic component (S1) of the culture supernatant fluid is immunochemically identical to purified emulsan, yet electrophoretically distinct. The characteristics of the parent strain were compared with those of two phage-resistant mutant strains which are defective in extracellular emulsan production. One of these mutants, termed TR3, lacked both the emulsan-like capsule on the cell surface and the extracellular S1 component. A second phage-resistant emulsan-defective mutant (TL4) was characterized by an antigenically altered and inactive form of extracellular emulsan. A relatively small amount of emulsan-like capsular material was consistently demonstrated on the cell surface of this mutant. The correlation between phage sensitivity and extracellular emulsan production was strengthened by the fact that emulsan-specific antibodies inhibited both emulsification activity and phage adsortion onto cells of the parent strain.

Acinetobacter↗
PubMed1982

Emulsan in Acinetobacter calcoaceticus RAG-1: Distribution of Cell-Free and Cell-Associated Cross-Reacting Material.

Emulsan is an extracellular polymeric bioemulsifier produced by Acinetobacter calcoaceticus RAG-1. Antibodies prepared against purified emulsan inhibited the activity of the polymer in a standard emulsification test. These antibodies were used to develop a sensitive enzyme-linked immunosorbent assay to monitor changes in cell-free emulsan throughout the growth cycle. This assay was also used to detect emulsan associated with the cell surface and to monitor changes in the distribution of cell-free and cell-associated emulsan throughout the growth cycle. Cells in the early exponential phase exhibited relatively large amounts of cell-associated emulsan which decreased rapidly between the midexponential and early stationary phases. This drop in cell-associated material was accompanied by a rise in the concentration of extracellular polymer. Moreover, in agreement with previous results (C. Rubinovitz, D. L. Gutnick, and E. Rosenberg, manuscript in press), production of cell-free emulsan was enhanced in the presence of chloramphenicol. The release of this material from the cell surface in the presence of chloramphenicol apparently involved the synthesis of cell-associated cross-reacting material since the relative amount of such cell-bound polymer remained constant during the treatment with the drug.

Journal Article↗