PubMed Health⌕ Search

Biomedical subjects

D M Lilley

Publications and source records attributed to D M Lilley.

At least 55 records · Page 3Linked to original sources
PubMed1998

Structure and activity of the hairpin ribozyme in its natural junction conformation: effect of metal ions.

The natural form of the hairpin ribozyme consists of a four-way RNA junction of which the single-stranded loop-carrying helices are adjacent arms. The junction can be regarded as providing a framework for constructing the active ribozyme, and the rate of cleavage can be modulated by changing the conformation of the junction. We find that the junction-based form of the hairpin ribozyme is active in magnesium, calcium, or strontium ions, but not in manganese, cadmium, or sodium ions. Using fluorescence resonance energy transfer experiments, we have investigated the global structure of the ribozyme. The basic folding of the construct is based on pairwise helical stacking, so that the two loop-carrying arms are located on opposite stacked helical pairs. In the presence of magnesium, calcium, or strontium ions, the junction of the ribozyme undergoes a rotation into a distorted antiparallel geometry, creating close physical contact between the two loops. Manganese ions induce the same global folding, but no catalytic activity; this change in global conformation is therefore necessary but not sufficient for catalytic activity. Fitting the dependence of the conformation on ionic concentration to a two-state model suggests that cooperative binding of two ions is required to bring about the folding. However, further ion binding is required for cleavage activity. Cobalt hexammine ions also bring about global folding, while spermidine generates a more symmetrical form of the antiparallel structure. Cadmium ions generate a different folded form, interpreted in terms of close loop-loop association while the junction is unfolded. Sodium ions were unable to induce any folding of the ribozyme, which remained slightly parallel. These results are consistent with a folding process induced by the binding of two group IIA metal ions, distributed between the junction and the loop interface.

Base Sequence↗
PubMed1998

Dissection of the sequence specificity of the Holliday junction endonuclease CCE1.

CCE1 is a Holliday (four-way DNA) junction-specific endonuclease which resolves mitochondrial DNA recombination intermediates in Saccharomycescerevisiae. The junction-resolving enzymes are a diverse class, widely distributed in nature from viruses to higher eukaryotes. In common with most other junction-resolving enzymes, the cleavage activity of CCE1 is nucleotide sequence-dependent. We have undertaken a systematic study of the sequence specificity of CCE1, using a single-turnover kinetic assay and a panel of synthetic four-way DNA junction substrates. A tetranucleotide consensus cleavage sequence 5'-ACT downward arrowA has been identified, with specificity residing mainly at the central CT dinucleotide. Equilibrium constants for CCE1 binding to four-way junctions are unaffected by sequence variations, suggesting that substrate discrimination occurs predominantly in the transition state complex. CCE1 cuts most efficiently at the junction center, but can also cleave the DNA backbone at positions one nucleotide 3' or 5' of the point of strand exchange, suggesting a significant degree of conformational flexibility in the CCE1:junction complex. Introduction of base analogues at single sites in four-way junctions has allowed investigation of the sequence specificity of CCE1 in finer detail. In particular, the N7 moiety of the guanine base-pairing with the cytosine of the consensus sequence appears to be crucial for catalysis. The functional significance of sequence specificity in junction-resolving enzymes is discussed.

Adenine↗
PubMed1998

Structural recognition and distortion by the DNA junction-resolving enzyme RusA.

RusA is a relatively small DNA junction-resolving enzyme of lambdoid phage-origin. Many of the physical characteristics of this enzyme are similar to those of junction-resolving enzymes of different origins. RusA binds to DNA junctions as a dimer, with a dissociation constant of 2 to 7 nM. RusA also exists in dimeric form in free solution, with a half time for subunit exchange of 4.2 minutes. We find that RusA can cleave both fixed junctions and those that can undergo a number of steps of branch migration, and confirm that the enzyme exhibits a strong preference for cleavage 5' to a CpC sequence. We have isolated a mutant protein, RusA D70N, that is completely inactive in cleavage while binding normally to DNA junctions, suggesting a role for aspartate 70 in the cleavage reaction. Constraining the conformation of the junction by means of tethering the helical ends leads to a marked reduction in cleavage rate by RusA, suggesting that the structure must be altered for cleavage. Using comparative gel electrophoresis we find that the global structure of the DNA junction is altered on RusA binding, into a structure that is different from any that is formed by the free junction. Moreover, the structure of the complex is the same irrespective of the presence or absence of magnesium ions. Thus, like all the junction-resolving enzymes, RusA both recognises and distorts the structure of DNA junctions.

Catalysis↗
PubMed1998

Two superhelix density-dependent DNA transitions detected by changes in DNA adsorption/desorption behavior.

The adsorption behavior of covalently closed circular plasmid DNA at the mercury/water interface was studied by means of AC impedance measurements. The dependence of the differential capacitance (C) of the electrode double layer on the potential (E) was measured in the presence of adsorbed DNA. It was found that the C-E curves of supercoiled DNA at native and highly negative superhelix densities (sigma), relaxed covalently closed circular DNA, and nicked DNA differed from each other. A detailed study of topoisomer distributions ranging from -sigma of 0 to 0.11 revealed two supercoiling-dependent transitions, at about -sigma = 0.04 (transition TI) and 0.07 (transition TII). Transition TI was detected by measuring the height of the adsorption/desorption peak 1 (at about -1.2 V against the saturated calomel electrode) and the decrease of capacitance (DeltaC) at -0.35 V. This transition may be due to a sudden change in the ability of the DNA to respond to the alternating voltage, probably caused by changes in the DNA tertiary and/or secondary structure. Transition TII was detected by measuring peak 3* (at about -1.3 V), which was absent in topoisomers with -sigma less than 0.05. This transition is due to changes in the DNA adsorption/desorption behavior related to increased accessibility of bases at elevated negative superhelix density. Opening of the duplex at highly negative superhelix density was also detected by the single-strand selective probe of DNA structure, osmium tetroxide, 2, 2'-bipyridine. Our results suggest that electrochemical techniques provide sensitive experimental analysis of changes in DNA structure.

Adsorption↗
PubMed1998

HMG box proteins bind to four-way DNA junctions in their open conformation.

The HMG box is an 80 amino acid domain found in a variety of eukaryotic chromosomal proteins and transcription factors. Binding to DNA is associated with recognition of structural distortion or manipulation of DNA structure. All the HMG box domains bind to four-way DNA junctions, which must therefore present some feature that is common to the binding targets of this wide variety of proteins. Since the four-way junction can itself adopt a variety of structures depending upon conditions, it is important to determine in which form it exists in complexes with HMG boxes. We find that a single HMG box domain is bound exclusively to the open square form of the junction and that conditions that stabilize the stacked X structure significantly lower affinity for the HMG box. We suggest that the HMG domain binds to one arm of the junction in the minor groove at the point of strand exchange and we present a model for the structure of the complex.

Animals↗
PubMed1998

Exchange between stacking conformers in a four-Way DNA junction.

Four-way DNA junctions undergo metal ion-induced folding by means of pairwise coaxial stacking of helical arms in one of two possible conformers that depend on the choice of stacking partners. For most such junctions there is a significant bias toward one conformer over the other. In this study we have characterized a four-way DNA junction in which there is rapid exchange between equal populations of the two possible stacking conformers. Analysis of the global conformation using comparative gel electrophoresis gives results consistent with either a tetrahedral disposition of the four arms or an equilibrium between equal populations of the two alternative stacked X-structures. Protection of bases at the center of the junction against attack by osmium tetroxide indicates that base stacking is preserved through the point of strand exchange. Cleavage across the point of strand exchange by the restriction enzyme MboII is consistent with pairwise coaxial stacking of helical arms. Taken together, these indicate that the junction adopts the stacked X-structure, but unusually there appears to be little bias for one stacking conformer over the other. Complete digestion of junctions by MboII demonstrates that all the molecules in solution pass through a given conformer during the time of incubation, demonstrating that exchange between conformers must occur. This is true even for minor stacking conformers in strongly biased junctions. Comparative gel electrophoresis shows that sequence changes at the third position out from the point of strand exchange can have a marked influence on the relative stability of the stacking conformers.

Cations, Divalent↗
PubMed1998

Activation of the leu-500 promoter by a reversed polarity tetA gene. Response to global plasmid supercoiling.

The leu-500 promoter is inactivated by a mutation in the -10 region but can be activated in topA Escherichia coli and Salmonella strains. We have found that the tetA gene plays a vital role in the topA-dependent activation of a plasmid-borne leu-500 promoter. In previous studies, the leu-500 promoter and tetA gene have been arranged divergently. In this study we have reversed the polarity of the tetA gene, thus locating the leu-500 promoter at the 3' end of tetA. Despite being formally located in the downstream region of tetA, the leu-500 promoter is equally well activated in a topA strain in this environment, even though it is 1.6 kilobase pairs away from the promoter of the reversed tetA gene. Activation of the leu-500 promoter depends on transcription and translation of tetA but is largely insensitive to the function of other transcription units on the plasmid. These results require a change in viewpoint of the role of tetA, from local to global supercoiling. We conclude that transcription of the tetA gene is the main generator of transcription-induced supercoiling that activates the leu-500 promoter. Unbalanced relaxation of this supercoiling leads to a net increase in the negative linking difference of the plasmid globally, and there is a linear correlation between the change in global plasmid topology and the activation of the leu-500 promoter. Thus the leu-500 promoter appears to respond to the negative supercoiling of the plasmid overall.

Antiporters↗
PubMed1998

Folding of the hairpin ribozyme in its natural conformation achieves close physical proximity of the loops.

The hairpin ribozyme is a self-cleaving motif found in the negatives strand of the satellite RNA of some plant viruses. In its natural context, the ribozyme comprises four helices, two of which contain conserved formally unpaired loops, that are adjacent arms of a four-way RNA junction. We show that the arms that would carry these loops are brought close together in the global conformation of the isolated junction. Using fluorescence resonance energy transfer, we demonstrate a two-magnesium ion-dependent conformational transition of the complete ribozyme that brings the loopbearing arms into close physical proximity. The ribozyme is active as a four-way junction, and the rate of cleavage may be modulated by the conformation of the four-way junction.

Base Sequence↗
PubMed1998

Global structure of four-way RNA junctions studied using fluorescence resonance energy transfer.

Four-way helical junctions are found widely in natural RNA species. In this study, we have studied the conformation of two junctions by fluorescence resonance energy transfer. We show that the junctions are folded by pairwise coaxial helical stacking, forming one predominant stacking conformer in both examples studied. At low magnesium ion concentrations, the helical axes of both junctions are approximately perpendicular. One junction undergoes a rotation into a distorted antiparallel structure induced by the binding of a single magnesium ion. By contrast, the axes of the four-way junction of the U1 snRNA remain approximately perpendicular under all conditions examined, and we have determined the stacking conformer adopted.

Base Sequence↗
PubMed1997

Ion-induced folding of the hammerhead ribozyme: a fluorescence resonance energy transfer study.

The ion-induced folding transitions of the hammerhead ribozyme have been analysed by fluorescence resonance energy transfer. The hammerhead ribozyme may be regarded as a special example of a three-way RNA junction, the global structure of which has been studied by comparing the distances (as energy transfer efficiencies) between the ends of pairs of labelled arms for the three possible end-to-end vectors as a function of magnesium ion concentration. The data support two sequential ion-dependent transitions, which can be interpreted in the light of the crystal structures of the hammerhead ribozyme. The first transition corresponds to the formation of a coaxial stacking between helices II and III; the data can be fully explained by a model in which the transition is induced by a single magnesium ion which binds with an apparent association constant of 8000-10 000 M-1. The second structural transition corresponds to the formation of the catalytic domain of the ribozyme, induced by a single magnesium ion with an apparent association constant of approximately 1100 M-1. The hammerhead ribozyme provides a well-defined example of ion-dependent folding in RNA.

Base Sequence↗
PubMed1997

Global structure of three-way DNA junctions with and without additional unpaired bases: a fluorescence resonance energy transfer analysis.

The structure of three-way DNA junctions with and without extrahelical adenine nucleotides in one strand at the branch point of the junction (i.e., An bulges with n = 0, 1, 2, and 3) has been investigated by fluorescence resonance energy transfer. The structure of the junction without bulged nucleotides was found to have a symmetric trigonal geometry. With bulges, the arrangement of the arms becomes asymmetrical. The energy transfer results suggest a model of bulged junctions where the angle between two of the arms is significantly smaller than between the other two pairs of arms. The acute angle becomes smaller as the number of nucleotides in the bulge increases. The FRET efficiencies of the junctions are the same in the presence of Mg++ and Na+ ions.

Base Composition↗
PubMed1997

Effect of additional unpaired bases on the stability of three-way DNA junctions studied by fluorescence techniques.

Fluorescence melting experiments were carried out to determine the relative stability of three-way DNA junctions with and without extrahelical adenine nucleotides in one strand at the branch point of the junction (i.e., An bulges where n = 0, 1, 2, and 3). The oligonucleotides were labeled with chromophores at the 5' ends of the strands. The progress of the thermal denaturation was followed by monitoring the fluorescence intensities and anisotropies of the dyes and the fluorescence resonance energy transfer between the two dyes. The results of the thermal denaturation experiments are interpreted and discussed in terms of either two-state thermodynamic models or statistical models for the thermal denaturation. The junctions all melt at the same temperature (at equal concentrations) within the error of the Tm determination, regardless of the presence, or absence, of the bulge. It is suggested that the denaturation of the helical arms begins primarily at the free ends of the helical arms and proceeds toward the branch point. The junctions, all which have 10 base pairs in each arm, possess thermal denaturation characteristics similar to duplexes with 20 arms. This leads to the proposition that for these junctions an important molecular parameter that controls the stability of the junctions is the number of base pairs between neighboring arms. The melting profiles obtained by monitoring the tetramethylrhodamine fluorescence are found to depend strongly on the nucleotide sequence in the single-stranded region.

Base Composition↗
PubMed1997

Severe axial bending of RNA induced by the U1A binding element present in the 3' untranslated region of the U1A mRNA.

The 3' untranslated region of the U1A mRNA contains a binding site for the U1A protein that consists of two asymmetric internal bulges. The bulges each comprise a loop of seven unpaired bases opposing a single base (termed a U1A box). The seven-base loops are located on opposite strands, distributed in a symmetrical manner about the intervening four-base duplex. We have investigated the global conformation of this binding element. Comparison of electrophoretic mobilities of RNA duplexes interrupted by a single U1A box with a series of duplexes of the same length containing oligoadenine bulges indicates that the individual boxes cause a substantial kinking of the helix axis, estimated to be 90 (+/- 10) degrees. A series of RNA duplexes were constructed containing a U1A box separated from an A5 bulge by a duplex section of length between 3 and 21 bp. It was found that the electrophoretic mobilities of these species varied sinusoidally, indicating that the U1A box introduces a defined kink into the RNA helix, rather than a point of flexibility. Electrophoretic experiments with the complete U1A binding element suggest that the axial trajectories of the two U1A boxes combine to give an approximately in-line, 180 degrees change in duplex direction.

Base Composition↗
PubMed1997

The crystal structure of a parallel-stranded guanine tetraplex at 0.95 A resolution.

In both DNA and RNA, stretches of guanine bases can form stable four-stranded helices in the presence of sodium or potassium ions. Sequences with a propensity to form guanine tetraplexes have been found in chromosomal telomers, immunoglobulin switch regions, and recombination sites. We report the crystal structure at 0.95 A resolution of a parallel-stranded tetraplex formed by the hexanucleotide d(TG4T) in the presence of sodium ions. The four strands form a right-handed helix that is stabilized by hydrogen-bonding tetrads of co-planar guanine bases. Well-resolved sodium ions are found between and, at defined points, within tetrad planes and are coordinated with the guanine O6 groups. Nine calcium ions have been identified, each with a well-defined hepta-coordinate hydration shell. Hydrogen-bonding water patterns are observed within the tetraplex's helical grooves and clustered about the phosphate groups. Water molecules in the groove may form a hydrogen bond with the O4', and may affect the stacking behavior of guanine. Two distinct stacking arrangements are noted for the guanine tetrads. The thymine bases do not contribute to the four-stranded conformation, but instead stack to stabilize the crystal lattice. We present evidence that the sugar conformation is strained and propose that this originates from forces that optimize guanine base stacking. Discrete conformational disorder is observed at several places in the phosphodiester backbone, which results from a simple crankshaft rotation that requires no net change in the sugar conformation.

Base Composition↗
PubMed1997

The junction-resolving enzyme T7 endonuclease I: quaternary structure and interaction with DNA.

Endonuclease I is a DNA junction-selective resolving enzyme from bacteriophage T7. Using a nuclease-defective mutant that retains normal binding to DNA we show that the protein binds to four-way DNA junctions as a dimer, in common with other junction-resolving enzymes studied. Gel filtration and chemical crosslinking indicate that endonuclease I also exists in free solution as a dimer together with a tetramer and higher molecular mass aggregates. However, in marked contrast with other junction-resolving enzymes, there is no detectable subunit exchange under normal conditions. Only by exposure to 6 M urea could we induce subunit exchange, and this was used to generate heterodimeric species containing one active and one inactive subunit. Using a supercoil-stabilised cruciform substrate we demonstrate that an active subunit of endonuclease I can act as a junction-specific nuclease in a heterodimeric combination with an inactive subunit. However, the two subunits of a fully active homodimeric enzyme each cleave the phosphodiester backbone of a cruciform within the lifetime of the DNA-protein complex.

Bacteriophage T7↗
PubMed1997

Recognition and manipulation of branched DNA structure by junction-resolving enzymes.

The junction-resolving enzymes are a class of nucleases that introduce paired cleavages into four-way DNA junctions. They are important in DNA recombination and repair, and are found throughout nature, from eubacteria and their bacteriophages through to higher eukaryotes and their viruses. These enzymes exhibit structure-selective binding to DNA junctions; although cleavage may be more or less sequence-dependent, binding affinity is purely related to the branched structure of the DNA. Binding and cleavage events can be separated for a number of the enzymes by mutagenesis, and mutant proteins that are defective in cleavage while retaining normal junction-selective binding have been isolated. Critical acidic residues have been identified in several resolving enzymes, suggesting a role in the coordination of metal ions that probably deliver the hydrolytic water molecule. The resolving enzymes all bind to junctions in dimeric form, and the subunits introduce independent cleavages within the lifetime of the enzyme-junction complex to ensure resolution of the four-way junction. In addition to recognising the structure of the junction, recent data from four different junction-resolving enzymes indicate that they also manipulate the global structure. In some cases this results in severe distortion of the folded structure of the junction. Understanding the recognition and manipulation of DNA structure by these enzymes is a fascinating challenge in molecular recognition.

Amino Acid Sequence↗
PubMed1997

Near-simultaneous DNA cleavage by the subunits of the junction-resolving enzyme T4 endonuclease VII.

In common with a number of other DNA junction-resolving enzymes, endonuclease VII of bacteriophage T4 binds to a four-way DNA junction as a dimer, and cleaves two strands of the junction. We have used a supercoil-stabilized cruciform substrate to probe the simultaneity of cleavage at the two sites. Active endonuclease VII converts the supercoiled circular DNA directly into linear product, indicating that the two cleavage reactions must occur within the lifetime of the protein-junction complex. By contrast, a heterodimer of active enzyme and an inactive mutant endonuclease VII leads to the formation of nicked circular product, showing that the subunits operate fully independently.

Bacteriophage T4↗