PubMed Health⌕ Search

Biomedical subjects

D R Korber

Publications and source records attributed to D R Korber.

18 recordsLinked to original sources

Planktonic or biofilm growth affects survival, hydrophobicity and protein expression patterns of a pathogenic Campylobacter jejuni strain.

The effect of planktonic or biofilm modes of growth on survival, hydrophobicity and cellular protein expression patterns of a pathogenic Campylobacter jejuni strain were determined. This was achieved by growing the strain in brain heart infusion broth (with 1% yeast extract), or attached to glass beads in the same medium, at 37 degrees C for 48 h under microaerophilic conditions. Cells from the broth or the bead surfaces were stored at different temperatures (4, 10, 25 and 37 degrees C) for 28 days in phosphate buffered saline (PBS) and monitored at appropriate time intervals for culturable numbers and hydrophobicity by standard methods. In addition, cells were inoculated onto the surface of two processed meat products (a bologna and a summer sausage) vacuum packaged and stored at 4 degrees C for 28 days. Numbers of culturable cells were monitored at appropriate time intervals by standard methods. Cells from the broth or the bead surfaces were also examined for protein expression using two-dimensional protein electrophoresis. Results indicated that numbers of culturable cells in phosphate buffered saline decreased from approximately 6 log colony forming units (cfu) g(-1) to undetectable levels within 14-day storage in a temperature dependent manner. Hydrophobicity of broth grown cells decreased from 15% to 0% adherence to xylene over the same time in a temperature independent manner. Cells grown in a biofilm mode initially displayed a <0.3% adherence to xylene which was maintained during storage. Furthermore, cells grown in the biofilm mode decreased in number more rapidly on storage in buffer than their counterparts grown in broth. Numbers of culturable cells on meat decreased from approximately 5 log cfu g(-1) to undetectable levels within 14-day storage in a product dependent manner, with the most rapid decrease observed for the more acidic summer sausage. Cells grown in a biofilm mode decreased in number more rapidly on storage than broth grown cells. The protein expression patterns differed between planktonic and biofilm cells with seven unique and 12 up-regulated protein spots expressed in a growth mode specific manner. A number of the differentially expressed spots were tentatively identified, by comparison to existing literature, as surface- and stress-associated proteins. Despite the elicitation of some putative stress proteins, this study importantly indicates that biofilm cells of C. jejuni are less resistant to stress than their planktonic counterparts and may lack a sophisticated adaptive stress-resistance response. These findings have implication in determining the risks of infection associated with C. jejuni contamination on food.

Bacterial Adhesion↗

Efficacy enhancement of trisodium phosphate against spoilage and pathogenic bacteria in model biofilms and on adipose tissue.

A two-step approach for enhancing the efficacy of trisodium phosphate (TSP) was evaluated using meat spoilage and pathogenic bacteria in flow cell biofilms and adipose tissue model systems. The process was based on the plasmolysis of attached bacteria (biofilms) with a hyperosmotic solution (1.5 M NaCl) and the subsequent deplasmolysis of cells with a low-osmotic-strength solution containing different concentrations of TSP (0.1, 0.25, 0.5, 0.625, and 1.0 % [wt/vol]). Escherichia coli, Salmonella Enteritidis, Pseudomonas sp., Listeria monocytogenes, and Brochothrix thermosphacta strains were cultivated for 24 h as pure culture biofilms in glass flow cells with complex media and were then treated with either 0.1, 0.25, 0.5, 0.625, and 1.0% TSP, or the same TSP concentrations delivered in conjunction with plasmolysis-deplasmolysis (PDP). Confocal scanning laser microscopy, a commercial fluorescent viability probe, and image analysis were then used to quantify the relative abundances of living and dead cells remaining after the different treatment regimes. With the exception of L. monocytogenes (which was resistant to TSP concentrations of up to 5%), the PDP process increased the sensitivity of the test strains to TSP. However, when similar experiments were conducted with pork adipose tissue, it became evident that higher TSP concentrations were necessary to produce significant decreases in the number of viable cells and that the PDP process generally failed to enhance TSP efficacy. An exception was L. monocytogenes, which exhibited an increase in sensitivity to TSP when inoculated tissue was pretreated with 1.5 M NaCl. It is thought that factors contributing to the failure of the PDP process to enhance the activity of TSP in meat systems involves the mode of TSP antimicrobial activity, alkaline pH stress, and the chemically complex, buffered nature of meats. It remains to be determined whether the PDP process is suitable for use with other food grade antimicrobial agents or can be used in nonfood biofilm control applications.

Adipose Tissue↗

Adaptation of bacterial communities to environmental transitions from labile to refractory substrates.

The aim of this work was to assess the adaptation of bacterial communities to environmental transitions from labile to refractory substrates. This involved testing the hypothesis that bacteria self-organize and propagate not only as individual cellular systems, but also as functional sets of interacting organisms. A biofilm community was cultivated in a flow-cell irrigated with tryptic soy broth and subjected to a cyclic series of environmental transitions, from labile to refractory substrates, followed by a period of starvation (30 days). The appearance and disappearance of specific colony morphotypes when the emigrants were plated onto tryptic soy agar was used to monitor the restructuring of the community. Confocal laser microscopy of flow cells showed that these transitions decreased the biofilm thickness and coverage. Substrate shifts also changed the architecture of the biofilm communities. Repeated inoculation of flow-cell communities with a composite inoculum increased the number and diversity of emigrants. Their biofilms were thicker and covered a wider area than those of communities that had been inoculated only at the beginning of the experiment. With repeated inoculation, the time required for the community to restructure and stabilize decreased during most transitions. This suggested that organismal recombination acted as a mechanism of adaptation, enhancing the growth of microbial communities exposed to environmental stresses. Changes in the profiles of emigrants during the adaptation of biofilm communities to environmental transitions showed the appearance and disappearance of discrete sets of organisms. This suggested that the biofilm communities responded to environmental stresses as sets of interacting organisms. Enhanced growth of biofilm communities due to repeated environmental cycling suggested that the functionality of cellular positioning accrued from one cycle to the next and was thus heritable, although it was not necessarily genetically encoded.

Adaptation, Physiological↗

Identification of synergistic interactions among microorganisms in biofilms by digital image analysis.

Digital image analysis showed that reductions in biofilm plating efficiency were due to the loss of protection provided by two benzoate-degrading strains of Pseudomonas fluorescens. This loss in protection was due to the spatial separation of the protective organisms from benzoate-sensitive organisms during the dilution process. Communities were cultivated in flow cells irrigated with trypticase soy broth. When the effluent from these flow cells was plated on 0.15% benzoic acid, satellite colonies formed only in the vicinity of primary colonies. A digital image analysis procedure was developed to measure the size and spatial distribution of these satellites as a function of distance from the primary colony. The size of satellites served as a measure of growth, and the number per unit area served as a measure of survival. At the three dilutions tested, the size and concentration of satellite colonies varied inversely with distance from the primary colonies. When these measurements were plotted, the slopes were used to quantify the effect of bacterial association on the growth and survivability of the satellites. In the absence of the primary colonies, satellites grew in axenic culture only at low benzoate concentrations. Thus benzoate-degrading organisms are capable of creating a protective microenvironment for other members of biofilm communities.

Agar↗

Surface-catalysed disinfection of thick Pseudomonas aeruginosa biofilms.

Transition metal catalysts were incorporated into polymers which formed the surface for bacterial attachment and biofilm formation in a constant depth film fermenter (100 microns thickness), flow chamber (about 30 microns thickness) and in batch culture (< 30 microns thickness). The catalysts drive the breakdown of persulphates to reactive oxygen species. When Pseudomonas aeruginosa biofilms were exposed to dilute solutions of potassium monopersulphate (20 micrograms ml-1-1 mg ml-1), significant enhancement of killing was notable for catalyst-containing surfaces over that of controls. The degree of enhancement was greatest for thin films, but was nevertheless significant for the 100 microns thick biofilms. Fluorescence probes and viability staining, in conjunction with laser confocal microscopy, showed that reactive species were generated at the biofilm-substratum interface and killed the biofilm from the inside. Reaction-diffusion limitation now concentrates the active species within the biofilm rather than protecting it, and a diffusion bump is established whereby further treatment agent is drawn to the substratum enabling relatively thick biofilms to be disinfected.

Biofilms↗

Impact of nutrient composition on a degradative biofilm community.

A microbial community was cultivated in flow cells with 2,4,6-trichlorobenzoic acid (2,4,6-TCB) as sole carbon and energy source and was examined with scanning confocal laser microscopy and fluorescent molecular probes. The biofilm community which developed under these conditions exhibited a characteristic architecture, including a basal cell layer and conspicuous mounds of bacterial cells and polymer (approximately 20 to 30 (mu)m high and 25 to 40 (mu)m in diameter) occurring at 20- to 200-(mu)m intervals. When biofilms grown on 2,4,6-TCB were shifted to a labile, nonchlorinated carbon source (Trypticase soy broth), the biofilms underwent an architectural change which included the loss of mound structures and the formation of a more homogeneous biofilm. Neutrally charged fluorescent dextrans, which upon hydration become cationic, were observed to bind to mounds, as well as to the basal cell layer, in 14-day biofilms. In contrast, polyanionic dextrans bound only to the basal cell layer, indicating that this material incorporated sites with both positive and negative charge. The results from this study indicate that nutrient composition has a significant impact on both the architecture and the physicochemistry of degradative biofilm communities.

Journal Article↗

Substratum topography influences susceptibility of Salmonella enteritidis biofilms to trisodium phosphate.

Established (48- and 72-h) Salmonella enteritidis biofilms grown in glass flow cells with or without artificial crevices (0.5-, 0.3-, and 0.15-mm widths) were subjected to a 10% trisodium phosphate (TSP) solution under different flow regimens (0.3, 0.6, 1.2, and 1.8 cm s-1). The abundance of biofilm remaining after TSP treatment, the biocidal efficacy of TSP, and the factors which contributed to bacterial survival were then evaluated by using confocal laser microscopy and a fluorescent viability probe. Biofilm age affected the amount of biofilm which remained following a 15-s exposure to TSP. After TSP treatment of 48-h biofilms, 29% of the original biofilm remained at the biofilm-liquid interface, whereas 75% of the biofilm remained at the base (the attachment surface). Following TSP treatment of 72-h biofilms, 27% of the biofilm material remained at the biofilm-liquid interface, 73% remained at the 5-micron depth, and 91% remained at the biofilm base. Results obtained using the BacLight viability probe indicated that TSP exposure killed all the cells in 48-h biofilms, whereas in the thicker 72-h biofilms, surviving bacteria (approximately 2% of the total) were found near the 5- and 0-micron depths. In the presence of artificially constructed crevices, an inverse relationship was shown to exist between bacterial survival (ranging from approximately 13 to 83% of total biofilm material) and crevice width. This relationship was further influenced by the velocity of TSP flow; high TSP flow velocities (1.8 cm s-1) resulted in the lowest number of surviving bacteria at the base of crevices (approximately 42% survival). Extended time courses demonstrated that after TSP stress was relieved, biofilms continued to grow within crevices but not in systems without crevices. It is suggested that advective TSP flux into crevices and through the biofilm matrix was enhanced under conditions of high flow. These results suggest that the inherent roughness of the substratum on which the biofilm was grown and the timing of TSP application are important factors controlling the efficacy of TSP treatment.

Animals↗

Germ theory vs. community theory in understanding and controlling the proliferation of biofilms.

Germ theory and pure culture methods have provided invaluable information concerning the role of bacteria in diseases resulting from a single organism which bypasses a host's defenses. However, they do not provide sufficient information concerning the synergisms which allow the members of biofilm communities to proliferate more effectively as communities rather than as individuals. The mechanisms of these synergies are potential targets for antimicrobial agents as well as potential mechanisms of resistance to antimicrobial agents. Understanding community-level phenomena in oral biology requires the culture, identification, and classification of functional plaque communities as well as new methods of identifying and quantifying communal relationships. Cultured biofilm communities also provide ideal models of bacterial self-organization in which information related to adaptive strategies arises not only through the recombination of genes within genomes, but also through the recombination of organisms within communities.

Adaptation, Biological↗

Bacterial plasmolysis as a physical indicator of viability.

Bacterial plasmolytic response to osmotic stress was evaluated as a physical indicator of membrane integrity and hence cellular viability. Digital image analysis and either low-magnification dark-field, high-magnification phase-contrast, or confocal laser microscopy, in conjunction with pulse application of a 1.5 M NaCl solution, were used as a rapid, growth-independent method for quantifying the viability of attached biofilm bacteria. Bacteria were considered viable if they were capable of plasmolysis, as quantified by changes in cell area or light scattering. When viable Salmonella enteritidis biofilm cells were exposed to 1.5 M NaCl, an approximately 50% reduction in cell protoplast area (as determined by high-magnification phase-contrast microscopy) was observed. In contrast, heat- and formalin-killed S. enteritidis cells were unresponsive to NaCl treatment. Furthermore, the mean dark-field cell area of a viable, sessile population of Pseudomonas fluorescens cells (approximately 1,100 cells) increased by 50% as a result of salt stress, from 1,035 +/- 162 to 1,588 +/- 284 microns2, because of increased light scattering of the condensed, plasmolyzed cell protoplast. Light scattering of ethanol-killed control biofilm cells underwent little change following salt stress. When the results obtained with scanning confocal laser microscopy and a fluorescent viability probe were compared with the accuracy of plasmolysis as a viability indicator, it was found that the two methods were in close agreement. Used alone or in conjunction with fluorochemical probes, physical indicators of membrane integrity provided a rapid, direct, growth-independent method for determining the viability of biofilm bacteria known to undergo plasmolysis, and this method may have value during efficacy testing of biocides and other antimicrobial agents when nondestructive time course analyses are required.

Bacteria↗

Digital image analysis of growth and starvation responses of a surface-colonizing Acinetobacter sp.

Surface growth of an Acinetobacter sp. cultivated under several nutrient regimens was examined by using continuous-flow slide culture, phase-contrast microscopy, scanning confocal laser microscopy, and computer image analysis. Irrigation of attached coccoid stationary-phase Acinetobacter sp. cells with high-nutrient medium resulted in a transition from coccoid to bacillar morphology. Digital image analysis revealed that this transition was biphasic. During phase I, both the length and the width of cells increased. In contrast, cell width remained constant during phase II, while both cell length and cell area increased at a rate greater than in phase I. Cells were capable of growth and division without morphological transition when irrigated with a low-nutrient medium. Rod-shaped cells reverted to cocci by reduction-division when irrigated with starvation medium. This resulted in conservation of cell area (biomass) with an increase in cell number. In addition, the changes in cell morphology were accompanied by changes in the stability of cell attachment. During phase I, coccoid cells remained firmly attached. Following transition in high-nutrient medium, bacillar cells displayed detachment, transient attachment, and drifting behaviors, resulting in a spreading colonization pattern. In contrast, cells irrigated with a low-nutrient medium remained firmly attached to the surface and eventually formed tightly packed microcolonies. It is hypothesized that the coccoid and bacillar Acinetobacter sp. morphotypes and associated behavior represent specialized physiological adaptations for attachment and colonization in low-nutrient systems (coccoid morphotype) or dispersion under high-nutrient conditions (bacillar morphotype).

Acinetobacter↗

Microbial biofilms.

Direct observations have clearly shown that biofilm bacteria predominate, numerically and metabolically, in virtually all nutrient-sufficient ecosystems. Therefore, these sessile organisms predominate in most of the environmental, industrial, and medical problems and processes of interest to microbiologists. If biofilm bacteria were simply planktonic cells that had adhered to a surface, this revelation would be unimportant, but they are demonstrably and profoundly different. We first noted that biofilm cells are at least 500 times more resistant to antibacterial agents. Now we have discovered that adhesion triggers the expression of a sigma factor that derepresses a large number of genes so that biofilm cells are clearly phenotypically distinct from their planktonic counterparts. Each biofilm bacterium lives in a customized microniche in a complex microbial community that has primitive homeostasis, a primitive circulatory system, and metabolic cooperativity, and each of these sessile cells reacts to its special environment so that it differs fundamentally from a planktonic cell of the same species.

Bacteria↗

Determination of diffusion coefficients in biofilms by confocal laser microscopy.

Microbial exopolymer may hinder the diffusion of nutrients, antibiotics, and other materials to the cell surface. Studies of diffusion in biofilms have been limited to indirect measurements. This study demonstrated the use of fluorescein and size-fractionated fluor-conjugated dextrans in conjunction with scanning confocal laser microscopy to directly monitor and determine diffusion coefficients within biofilms. The monitoring approaches were simple and, when combined with computerized image collection, allowed assembly of a data set suitable for calculation of one-dimensional diffusion coefficients for biofilm regions. With these techniques, it was shown that regional variability in the mobility of the dextrans occurred within mixed-species biofilms. Some regions exhibited rapid diffusion of all test molecules, while adjacent regions were only penetrated by the lower-molecular-weight compounds. The effective diffusion coefficients (D(e)) determined in a mixed-species biofilm were a function of the molecular radius of the probe (i.e., fluorescein, D(e) = 7.7 x 10 cm s; 4,000 molecular weight, D(e) = 3.1 x 10 cm s; and 2,000,000 molecular weight, D(e) = 0.7 x 10 cm s). These results demonstrated that diffusion in the biofilm was hindered relative to diffusion in the bulk solution. The study indicated that in situ monitoring by scanning laser microscopy is a useful approach for determining the mobility of fluorescently labeled molecules in biofilms, allowing image acquisition, appropriate scales of study, both xy and xz monitoring, and calculation of D(e) values.

Journal Article↗

Effect of Motility on Surface Colonization and Reproductive Success of Pseudomonas fluorescens in Dual-Dilution Continuous Culture and Batch Culture Systems.

The colonization of glass surfaces by motile and nonmotile strains of Pseudomonas fluorescens was evaluated by using dual-dilution continuous culture (DDCC), competitive and noncompetitive attachment assays, and continuous-flow slide culture. Both strains possessed identical growth rates whether in the attached or planktonic state. Results of attachment assays using radiolabeled bacteria indicated that both strains obeyed first-order (monolayer) adsorption kinetics in pure culture. However, the motile strain attached about four times more rapidly and achieved higher final cell densities on surfaces than did the nonmotile strain (2.03 x 10 versus 5.57 x 10 cells vial) whether evaluated alone or in cocultures containing motile and nonmotile P. fluorescens. These kinetics were attributed to the increased transport of motile cells from the bulk aqueous phase to the hydrodynamic boundary layer where bacterial attachment, growth, and recolonization could occur. First-order attachment kinetics were also observed for both strains by using continuous-flow slide culture assays analyzed by image analysis. The DDCC system contained both aqueous and particulate phases which could be diluted independently. DDCC results indicated that when cocultures containing motile and nonmotile P. fluorescens colonized solid particles, the motile strain replaced the nonmotile strain in the system over time. Increasing the aqueous-phase rates of dilution decreased the time required for extinction of the nonmotile strain while concurrently decreasing the overall carrying capacity of the DDCC system for both strains. These results confirmed that bacterial motility conveyed a selective advantage during surface colonization even in aqueous-phase systems not dominated by laminar flow.

Journal Article↗

Evaluation of Fleroxacin Activity against Established Pseudomonas fluorescens Biofilms.

Scanning confocal laser microscopy (SCLM) and fluorescent molecular probes were used to evaluate the effect of the fluoroquinolone fleroxacin on the architecture of established Pseudomonas fluorescens biofilms. Control P. fluorescens biofilms were heterogeneous, consisting of cell aggregates extending from the attachment surface to maximum measured depths of approximately 90 mum (mean biofilm depth at 72 h, 42 +/- 28 mum) and penetrated by an array of channels. In contrast, fleroxacin-treated biofilms were less deep (mean biofilm depth at 72 h, 29 +/- 8 mum), varied little in depth over large areas, and consisted of a homogeneous distribution of cells. Fleroxacin also caused cells to elongate, with cells located near the biofilm-liquid interface lengthening significantly more than cells located at the attachment surface. By using SCLM, acridine orange, and image analysis it was found that approximately 59% of cells within fleroxacin-treated biofilms emitted red fluorescence whereas >99% of cells from control biofilms emitted green fluorescence. The fleroxacin-treated cells which emitted red fluorescence were observed to be the population of cells which elongated.

Journal Article↗

Behavioral analysis of Vibrio parahaemolyticus variants in high- and low-viscosity microenvironments by use of digital image processing.

Digital image analysis and light microscopy were used to study and quantify the growth and behavior of two variants and selected flagellar mutants of Vibrio parahaemolyticus in glass flow cells under high- and low-viscosity conditions. The observations showed a series of surface-associated behaviors, including attachment, microcolony formation, migration, chemotactic movements, and aggregation, indicating a substantial degree of adaptive flexibility and multicellular behavior during growth of V. parahaemolyticus at interfaces.

Bacterial Adhesion↗

Proteus mirabilis biofilm protection against struvite crystal dissolution and its implications in struvite urolithiasis.

Proteus mirabilis biofilm formation, struvite (MgNH4PO4.6H2O) crystal formation and dissolution in an artificial urine mixture were monitored using computer-enhanced microscopy (CEM) and a 1 x 3 mm. glass flow cell. Image analysis showed that P. mirabilis biofilm formation did not occur to any extent at macroenvironment flow rates greater than two mL/h (equivalent to a microenvironment flow rate of less than 5 microns./sec). Essentially, cells attached to glass surfaces, grew slowly and divided. Daughter cells were generally released directly into the medium where they could then presumably colonize other regions. Microcolonies formed by the adhesion of aggregates of cells from the medium, and over time grew into biofilms. Struvite crystallization due to urease activity and pH elevation above neutrality, was preceded by the deposition of organic matter on the glass surface, followed by the appearance of a number of tiny (one to two microns.) crystals. Crystals forming within a biofilm at low dilution rates took on a characteristic twinned or "X-shaped" appearance (crystal habit) indicative of a rapid growth rate. Those forming outside the biofilm took on a more tabular appearance reflecting their slower growth. When the macroenvironment flow rate of artificial urine (initial pH 5.8) in the glass flow cell was increased from two mL/h to four mL/h, struvite crystals not associated with biofilms dissolved within five to 10 min. Crystals entrapped within the P. mirabilis biofilm withstood flow rates up to 200 mL/h presumably due to the maintenance of an alkaline Mg-saturated microenvironment within the biofilm. These observations may suggest a mechanism by which struvite calculi can grow in spite of neutral or acidic urine pH and resist mild acidification therapy.

Bacterial Adhesion↗

Optical sectioning of microbial biofilms.

Scanning confocal laser microscopy (SCLM) was used to visualize fully hydrated microbial biofilms. The improved rejection of out-of-focus haze and the increased resolution of SCLM made it preferable to conventional phase microscopy for the analysis of living biofilms. The extent of image improvement was dependent on the characteristics of individual biofilms and was most apparent when films were dispersed in three dimensions, when they were thick, and when they contained a high number of cells. SCLM optical sections were amenable to quantitative computer-enhanced microscopy analyses, with minimal interference originating from overlying or underlying cell material. By using SCLM in conjunction with viable negative fluorescence staining techniques, horizontal (xy) and sagittal (xz) sections of intact biofilms of Pseudomonas aeruginosa, Pseudomonas fluorescens, and Vibrio parahaemolyticus were obtained. These optical sections were then analyzed by image-processing techniques to assess the distribution of cellular and noncellular areas within the biofilm matrices. The Pseudomonas biofilms were most cell dense at their attachment surfaces and became increasingly diffuse near their outer regions, whereas the Vibrio biofilms exhibited the opposite trend. Biofilms consisting of different species exhibited distinctive arrangements of the major biofilm structural components (cellular and extracellular materials and space). In general, biofilms were found to be highly hydrated, open structures composed of 73 to 98% extracellular materials and space. The use of xz sectioning revealed more detail of biofilm structure, including the presence of large void spaces within the Vibrio biofilms. In addition, three-dimensional reconstructions of biofilms were constructed and were displayed as stereo pairs. Application of the concepts of architectural analysis to mixed- or pure-species biofilms will allow detailed examination of the relationships among biofilm structure, adaptation, and response to stress.

Image Processing, Computer-Assisted↗