PubMed Health⌕ Search

Biomedical subjects

D R Ripoll

Publications and source records attributed to D R Ripoll.

31 records · Page 2Linked to original sources

Thrombin-bound conformation of a cyclic anticoagulant peptide using transferred nuclear Overhauser effect (NOE), distance geometry, and NOE simulations.

A cyclic hirudin C-terminal fragment, even truncated to eight residues, retains higher activity in binding to thrombin compared with its linear analogue of the same peptide length. In this paper, we report the results of a conformational study of a cyclic hirudin peptide 55-62 ([sequence: see text]) bound to the exosite of thrombin. Based on transferred NOE data and molecular modeling, conformation of the 18-membered ring was well defined with little mobility in the loop region. The backbone conformations of residues Glu (58) to Lys (61) are very similar to those in a native 11-residue linear peptide in the thrombin-bound state [Ni et al. (1990) Biochemistry, vol. 29, pp. 4479-4489; Skrzypczak-Jankun et al. (1991) Journal of Molecular Biology, vol. 221, pp. 1379-1393]. The side chain of Ile (59), the most critical residue, assumes a gauche- conformation, as observed in linear hirudin peptides. The bound conformations of residues Phe(56) and Glu (57) are defined by an iterative procedure involving the matching of computed and experimental transferred NOE intensities. The exosite of thrombin appears to be very specific to both the backbone and the side-chain conformations of the hirudin C-terminal peptides, especially those of residues Phe(56) and Ile(59).

Amino Acid Sequence↗

An electrostatic mechanism for substrate guidance down the aromatic gorge of acetylcholinesterase.

Electrostatic calculations based on the recently solved crystal structure of acetylcholinesterase (acetylcholine acetylhydrolase, EC 3.1.1.7) indicate that this enzyme has a strong electrostatic dipole. The dipole is aligned with the gorge leading to its active site, so that a positively charged substrate will be drawn to the active site by its electrostatic field. Within the gorge, aromatic side chains appear to shield the substrate from direct interaction with most of the negatively charged residues that give rise to the dipole. The affinity of quaternary ammonium compounds for aromatic rings, coupled with this electrostatic force, may work in concert to create a selective and efficient substrate-binding site in acetylcholinesterase and explain why the active site is situated at the bottom of a deep gorge lined with aromatic residues.

Acetylcholinesterase↗

Solution structure of a platelet receptor peptide bound to bovine alpha-thrombin.

NMR experiments were carried out to study the interaction of thrombin with a synthetic peptide, ESKATNATLDPR, derived from the newly-identified platelet receptor for thrombin [Vu, T.-K. H., Hung, D. T., Wheaton, V. I., & Coughlin, S. R. (1991) Cell 64, 1057-1068]. On the basis of the observation of the thrombin-induced line broadening and transferred NOEs, binding of the peptide was found to be located exclusively within residues LDPR of the proteolytic cleavage site LDPR/S essential for receptor activation by thrombin. Measurement of transferred NOEs and molecular modeling indicate that the side chain of the Asp(P3) residue may form a hydrogen bond with thrombin and, by doing so, it is brought near a positively-charged thrombin residue Arg(221A), thereby partially neutralizing the negative charge of an Asp residue at this site of protein substrates. The hydrophobic side chains of residues Leu(P4) and Pro(P2) reside on the same side of the peptide backbone as indicated by transferred NOEs and were found by modeling to fit into a hydrophobic cage around the thrombin active site. These results suggest that the interaction of thrombin with protein substrates such as prothrombin, protein C, protein S, the platelet receptor, and the A alpha- and B beta-chains of fibrinogen all follow the same canonical binding mode in that the substrate forms an antiparallel beta-strand with thrombin.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

Conformational stability of a thrombin-binding peptide derived from the hirudin C-terminus.

The COOH-terminal region of hirudin represents an independent functional domain that binds to an anion-binding exosite of thrombin and inhibits the interaction of thrombin with fibrinogen and regulatory proteins in blood coagulation. The thrombin-bound structure of the peptide fragment, hirudin 55-65, has been determined by use of transferred NOE spectroscopy [Ni, F., Konishi, Y., & Scheraga, H. A. (1990) Biochemistry 29, 4479-4489]. The stability of the thrombin-bound conformation has been characterized further by a combined NMR and theoretical analysis of the conformational ensemble accessible by the hirudin peptide. Medium- and long-range NOE's were found for the free hirudin peptide in aqueous solution and in a mixture of dimethyl sulfoxide and water at both ambient (25 degrees C) and low (0 degrees C) temperatures, suggesting that ordered conformations are highly populated in solution. The global folding of these conformations is similar to that in the thrombin-bound state, as indicated by NOE's involving the side-chain protons of residues Phe(56), Ile(59), Pro(60), Tyr(63), and Leu(64). Residues Glu(61), Glu(62), Tyr(63), and Leu(64) all contain approximately 50% of helical conformations calculated from the ratio of the sequential dNN and d alpha N NOE's. Among the helical ensemble, active 3(10)-helical conformations were found by an analysis of the medium-range [(i,i+2) and (i,i+3)] NOE's involving the last six residues of the peptide. An analysis of the side-chain rotamers revealed that, upon binding to thrombin, there may be a rotation around the alpha CH-beta CH bond of Ile(59) such that Ile(59) adopts a gauche- (chi 1 = +60) conformation in contrast to the highly populated trans (chi 1 = -60) found for Ile(59) in the free peptide. However, the thrombin-bound conformation of the hirudin peptide is still an intrinsically stable conformer, and the preferred conformational ensemble of the peptide contains a large population of the active conformation. The apparent preference for a gauche- (chi 1 = +60) side-chain conformation of Ile(59) in the bound state may be explained by the existence of a positively charged arginine residue among the hydrophobic residues in the thrombin exosite.

Binding Sites↗

Refinement of the thrombin-bound structure of a hirudin peptide by a restrained electrostatically driven Monte Carlo method.

Energy refinement of the structure of a linear peptide, hirudin56-65, bound to thrombin was carried out using a conformational search method in combination with restrained minimization. Five conformations originated from nmr data and distance geometry calculations having a similar global folding pattern but quite different backbone conformations were used as the starting structures. As a result of this approach, a series of low-energy conformations compatible with a set of upper and lower bounds of interproton distances determined from transferred nuclear Overhauser effects were found. A comparison among the lowest energy conformations of each run showed that the combination of energy refinement plus distance constraints led to a very well-defined structure for both the backbone and the side chains of the last 7 residues of the polypeptide. Furthermore, the low-energy conformations generated with this technique contain a segment of 3(10)-helix involving the last 5 residues at the COOH terminal end.

Electrochemistry↗

Conformational analysis of a 12-residue analogue of mastoparan and of mastoparan X.

We have investigated the conformational properties of a truncated analogue of mastoparan and of mastoparan X, both peptides from wasp venom. The electrostatically driven Monte Carlo method was used to explore the conformational space of these short peptides. The initial conformations used in this study, mainly random ones, led to alpha-helical conformations. The alpha-helical conformations thus found exhibit an amphipathic character. These results are in accord with experimental data from NMR and CD spectroscopy.

Amino Acid Sequence↗

Conformational study of a peptide epitope shows large preferences for beta-turn conformations.

The conformational preferences of the 7-residue peptide Glu-Val-Val-Pro-His-Lys-Lys was investigated using a global search algorithm, namely the Electrostatically Driven Monte Carlo (EDMC) method, and the ECEPP/2 potential energy function. This particular sequence corresponds to the N-terminal portion of a 19-residue peptide antigen whose three dimensional structure, when complexed to a cognate antibody, was reported recently. As a result of this study a series of low-energy conformations were identified showing a common folding pattern with residues Val-3, Pro-4, His-5 and Lys-6 forming a beta turn. A comparison of the computed conformations with the one determined by X-ray crystallography in the antibody-antigen complex reveals marked similarities. In most of the cases rms deviations smaller than 1.1 A were found for the backbone atoms of the four residues forming the turn. These results suggest that the recognition process is accomplished in this case through the interaction of the antibody with relatively stable conformers of the antigenic peptide.

Amino Acid Sequence↗

The electrostatically driven Monte Carlo method: application to conformational analysis of decaglycine.

The Electrostatically Driven Monte Carlo (EDMC) method was applied in a study of a decamer of glycine whose conformational behavior is described by the Empirical Conformational Energy Program for Peptides (ECEPP/2) potential energy model. When free neutral end groups were used, it was found that conformations that were not alpha-helical had significantly lower potential energies than fully alpha-helical ones. However, when the N- and C-termini were blocked by acetyl and methyl amide groups, respectively, the number of unsatisfied hydrogen-bond donors and acceptors at the helix termini was diminished from 8 to 6; in this case, the possibility of forming two additional alpha-helical hydrogen bonds was an important enough factor in making the alpha-helical conformation the one with the lowest energy. The EDMC method was used as a global energy optimizer since it does not often become trapped in high-energy local minima.

Electrochemistry↗

On the multiple-minima problem in the conformational analysis of polypeptides. V. Application of the self-consistent electrostatic field and the electrostatically driven Monte Carlo methods to bovine pancreatic trypsin inhibitor.

In connection with the accompanying paper to test various models for the hydration of polypeptides, we have explored a limited portion of the conformational energy hyperspace of the small protein bovine pancreatic trypsin inhibitor (BPTI) with the aid of two search methods developed in this laboratory. A series of low-energy conformations was obtained as a result of this study. These conformations constitute a set of local minima in the conformational energy space of the molecule as described by the ECEPP/2 (Empirical Conformational Energy Program for Peptides) potential energy function, without the inclusion of hydration. Five different initial conformations were used in this exploration: the first corresponds to an energy-refined structure based on the crystallographic coordinates (4PTI) provided by Deisenhofer and Steigemann and reported previously by Meirovitch and Scheraga. The remaining four initial conformations were obtained by using a Variable-Target-Function procedure, applied to the experimental Cartesian coordinates (5PTI) reported by Wlodawer et al. The self-consistent electrostatic field (SCEF) and the electrostatically driven Monte Carlo (EDMC) methods were used to search the conformational space. The SCEF and EDMC methodologies assume that a polypeptide or protein molecule is driven toward the native structure mainly by the action of the electrostatic interactions. Application of these methodologies led to a set of conformations (up to 50 kcal/mol lower than the starting ones) with ECEPP/2 energies lower than any of those that we had previously found. Application of both methods to the initial conformation generated from 4PTI led to a series of low-energy conformations exhibiting similar rms deviations with respect to the experimental data (4PTI) as did the starting conformation. However, statistical analysis of the runs that had started from the conformations generated by using the variable-target-function procedure (and applying the EDMC method) indicated that the rms deviations of the atomic positions of the new low-energy conformations tended to increase as the energy improved, when compared with the X-ray data from which the starting conformations had been generated. The structures with the lowest energies also had radii of gyration smaller than the experimentally observed one. These results indicated a need to include hydration in the potential function, and provided the conformations used in the accompanying paper to test various hydration models.

Animals↗

On the multiple-minima problem in the conformational analysis of polypeptides. IV. Application of the electrostatically driven Monte Carlo method to the 20-residue membrane-bound portion of melittin.

The conformational space of the membrane-bound portion of melittin has been searched using the electrostatically driven Monte Carlo (EDMC) method with the ECEPP/2 (empirical conformational energy program for peptides) algorithm. The former methodology assumes that a polypeptide or protein molecule is driven toward the native structure by the combined action of electrostatic interactions and stochastic conformational changes associated with thermal movements. The algorithm produces a Monte Carlo search in the conformational hyperspace of the polypeptide using electrostatic predictions and a random sampling technique, combined with local minimization of the energy function, to locate low-energy conformations. As a result of 8 test calculations on the 20-residue membrane-bound portion of melittin, starting from six arbitrary and two completely random conformations, the method was able to locate a very low-energy region of the potential with a well-defined structure for the backbone. In all of the cases under study, the method found a cluster of similar low-energy conformations that agree well with the structure deduced from x-ray diffraction experiments and with one computed earlier by the build-up procedure.

Amino Acid Sequence↗

The multiple-minima problem in the conformational analysis of polypeptides. III. An electrostatically driven Monte Carlo method: tests on enkephalin.

The three-dimensional conformation of Met-enkephalin, corresponding to the lowest minimum of the empirical potential energy function ECEPP/2 (empirical conformational energy program for peptides), has been determined using a new algorithm, viz. the Electrostatically Driven Monte Carlo Method. This methodology assumes that a polypeptide or protein molecule is driven toward the native structure by the combined action of electrostatic interactions and stochastic conformational changes associated with thermal movements. These features are included in the algorithm that produces a Monte Carlo search in the conformational hyperspace of the polypeptide, using electrostatic predictions and a random sampling technique to locate low-energy conformations. In addition, we have incorporated an alternative mechanism that allows the structure to escape from some conformational regions representing metastable local energy minima and even from regions of the conformational space with great stability. In 33 test calculations on Met-enkephalin, starting from arbitrary or completely random conformations, the structure corresponding to the global energy minimum was found in all the cases analyzed, with a relatively small search of the conformational space. Some of these starting conformations were right or left-handed alpha-helices, characterized by good electrostatic interactions involving their backbone peptide dipoles; nevertheless, the procedure was able to convert such locally stable structures to the global-minimum conformation.

Electrochemistry↗