PubMed Health⌕ Search

Biomedical subjects

D Saville

Publications and source records attributed to D Saville.

12 recordsLinked to original sources

Effect of milling conditions on the solid-state conversion of ranitidine hydrochloride form 1.

Powder samples of ranitidine hydrochloride forms 1 and 2 were milled using a vibrational ball mill (Retsch MM301) for periods up to 240min at 4, 12 and 35 degrees C. X-ray powder diffraction (XRPD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), solid-state nuclear magnetic resonance (NMR) and differential scanning calorimetry (DSC) were used to monitor solid-state properties of the milled samples. Milling of form 1 at 4 degrees C led to a powder temperature of 36 degrees C in the milling chamber and produced only amorphous drug; at 12 degrees C (powder temperature 45 degrees C) and at 35 degrees C (powder temperature 62 degrees C) progressive transformation of form 1 via amorphous drug to form 2 occurred. DSC of the milled samples showed a glass transition at 13-30 degrees C and a crystallization exotherm (T(c)) between 30 and 65 degrees C if the sample contained amorphous drug. The behaviour of the solid was speculated to be influenced by the relationship between powder temperature and T(c); at powder temperatures below T(c), amorphous drug is formed but no crystallization of form 2 occurs; at temperatures close to T(c), amorphous content initially increases with transformation to form 2 on continued milling. At temperatures much higher than T(c), at intermediate stages, less amorphous drug but both form 1 and form 2 are recovered, but continued milling gives only form 2. Form 2 did not transform to form 1 under any conditions used in this study.

Calorimetry, Differential Scanning↗

Cross-linking of dried paracetamol alginate granules Part 1. The effect of the cross-linking process variables.

This paper reports on the cross-linking of dried (<5% moisture) paracetamol alginate granules with calcium chloride solutions. The effect of calcium concentration, temperature of the treatment solution, stirring speed and time used during cross-linking of granules on water uptake by the granules during cross-linking and physical properties of the cross-linked and dried granules were studied. A full factorial study of these factors each at two levels was used (CaCl2.2H2O: 20, 100 mg/ml; temperature: 25, 45 degrees C; stirrer speed: 25, 240 rpm; time: 1.5 and 5.5 min) to treat dried stock granules (size: 0.8-1.0 mm) containing the model drug paracetamol and sodium alginate powder (1:1) which were prepared using conventional aqueous granulation under low shear. In addition to SEM and photomicrography, the physical properties studied were water uptake during cross-linking, yield, aggregation behaviour, moisture content, drug content, early stage drug release [over 10 s (R10) and the next 50 s (R50)] and calcium and sodium content of the unwashed cross-linked granules. Dry granules were successfully cross-linked. The treatment factors significantly affected most of the response variables. The variables most affected were water uptake (78-254%), drug entrapment (58-86%), early release (R10: 1.2-6.4% and R50: 3.0-12.2%), granule aggregation (0-70%), calcium (6.02-12.4%) and sodium content (1.2-6.44%). SEM photographs suggest that low calcium treated granules were less porous in nature compared to high calcium treated granules. Low shear drug alginate granules can be cross-linked in dried state. The properties of the cross-linked granules can be modified by altering the treatment process.

Acetaminophen↗

Determination of polymorphic forms of ranitidine-HCl by DRIFTS and XRPD.

The identification, characterization and quantification of crystal forms are becoming increasingly important within the pharmaceutical industry. A combination of different physical analytical techniques is usually necessary for this task. In this work solid-state techniques, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and X-ray powder diffractometry (XRPD) were combined to analyze polymorphic purity of crystalline ranitidine-HCl, an antiulcer drug, H2 receptor antagonists. A series of 12 different mixtures of Form 1 and 2 was prepared by geometric mixing and their DRIFT spectra and XRD powder patterns were obtained and analyzed, either alone or combined together, using Artificial Neural Networks (ANNs). A standard feed-forward network, with back-propagation rule and with multi layer perceptron architecture (MPL) was chosen. A working range of 1.0-100% (w/w) of crystal Form 2 in Form 1 was established with a minimum quantifiable level (MQL) of 5.2% and limit of detection of 1.5% (w/w). The results demonstrate that DRIFTS combined with XRPD may be successfully used to distinguish between the ranitidine-HCl polymorphs and to quantify the composition of binary mixtures of the two.

Ranitidine↗

Effect of grapefruit juice on pharmacokinetics and pharmacodynamics of verapamil enantiomers in healthy volunteers.

OBJECTIVES: To determine the effect of grapefruit juice on the pharmacokinetics and pharmacodynamics of S- and R-verapamil (given as racemates) at steady state. METHODS: Nine healthy male volunteers followed a randomised cross-over study comprising two treatment periods. Pretreatments of 200 ml orange juice (control) or grapefruit juice twice daily for 5 days and 120 mg verapamil (orally) twice daily for 3 days were given. On the study day, the subjects received the morning dose of verapamil with either orange juice (control) or grapefruit juice. Plasma and urine samples were collected for measurement of S- and R-verapamil and the metabolites S- and R-norverapamil. Blood pressure (BP), heart rate (HR) and PR-interval were monitored. RESULTS: During the grapefruit juice period, the steady-state peak and trough concentrations of S-verapamil were moderately increased (peak 41+/-25 ng ml(-1) versus 26+/-13 ng ml(-1), trough 14+/-7 ng ml(-1) versus 12+/-6 ng ml(-1), P=0.08). Grapefruit juice significantly increased the area under the plasma concentration-time curve during the 12-h dose interval (AUC0-12 h) of S-verapamil by 36% (292+/-146 ng h ml(-1) versus 215+/-102 ng h ml(-1), P=0.04). Similar results were obtained for peak and trough concentrations of R-verapamil. The AUC0-12 h of R-verapamil was increased by 28% (1022+/-412 ng h ml(-1) versus 800+/-316 ng h ml(-1), P=0.04). Elimination half-life and renal clearance of both S- and R-verapamil were not affected. Considerable inter-subject variability in interaction was shown. There were no significant differences in the pharmacodynamic parameters (BP, HR and PR-interval). CONCLUSIONS: The present study has demonstrated an interaction between verapamil and grapefruit juice, which is likely due to an inhibition of intestinal metabolism resulting in increased oral bioavailability.

Adult↗

Ranitidine hydrochloride X-ray assay using a neural network.

A simple X-ray powder diffractometric (XRD) method with artificial neural networks (ANNs) for data modelling was developed to recognize and quantify two crystal modifications of ranitidine HCl in mixtures and thus, provide information about the solid state of the bulk drug. The method was also used to quantify ranitidine HCl from tablets in the presence of other components. An ANN consisting of three layers of neurons was trained by using a back-propagation learning rule. A sigmoid output function was used in the hidden layer to facilitate non-linear fitting. Unlike other techniques the ANN method described here employed pattern recognition on the entire XRD pattern. Correct classification was mainly influenced by the XRD pattern resolution. It was shown that data transformations improved the quantitative performance when the XRD patterns were not contaminated by other components. Only smoothed X-ray diffractograms were required to distinguish between the two crystalline forms in a mixture. In the case of ranitidine-HCl quantification from tablets, where significant interference with tablet excipients was present, better results were obtained without data transformations. The trained ANN perfectly quantified ranitidine HCI polymorphic forms from mixtures (mean sum of squared error was less than 0.02%) and ranitidine HCl form 1 from tablets (recovery = 98.65). Excellent quantification performance of the ANN analysis. demonstrated in this study, serves as an indication of the broad potential of neural networks in pattern analysis. While the system described has been developed to interpret XRD patterns, peak detection has implications in every chemical application where the recognition of peak-shaped signals in analytical data is important.

Anti-Ulcer Agents↗

Powder diffractometric assay of two polymorphic forms of ranitidine hydrochloride.

A simple X-ray powder diffractometric method was developed for the qualitative and quantitative assay of the two crystalline modifications of ranitidine-HCl. The main purpose of the present work was to investigate if artificial neural networks (ANNs) could be applied in quantitative X-ray diffractometric analyses. The ANN approach was compared with a conventional mixture design method. The results obtained by the ANN had a smaller standard deviation and relative error and a better precision at lower concentrations. ANNs provide a simple alternative to conventional statistical modelling methods to identify the non-linear relationship without complex equations.

Anti-Ulcer Agents↗

Functional nonequivalence of Drosophila actin isoforms.

We show that different Drosophila actin isoforms are not interchangeable. We sequenced the six genes that encode conventional Drosophila actins and found that they specify amino acid replacements in 27 of 376 positions. To test the significance of these changes we used directed mutagenesis to introduce 10 such conversions, independently, into the Act88F flight muscle-specific actin gene. We challenged these variant actins to replace the native protein by transforming germline chromosomes of a Drosophila strain lacking flight muscle actin. Only one of the 10 reproducibly perturbed myofibrillar function, demonstrating that most isoform-specific amino acid replacements are of minor significance. In order to establish the consequences of multiple amino acid replacements, we substituted portions of the Drosophila Act88F actin gene with corresponding regions of genes encoding other isoforms. Only one of five constructs tested engendered normally functioning flight muscles, and the severity of myofibrillar defects correlated with the number of replacements within the chimeric genes. Finally, we completely converted the flight muscle actin-encoding gene to one specifying a nonmuscle isoform, a change entailing a total of 18 amino acid replacements. Transformation of flies with this construct resulted in disruption of flight muscle structure and function. We conclude that actin isoform sequences are not equivalent and that effects of the amino acid replacements, while minor individually, collectively confer unique properties.

Actins↗

Secretion of Saccharomyces cerevisiae killer toxin: processing of the glycosylated precursor.

Killer toxin secretion was blocked at the restrictive temperature in Saccharomyces cerevisiae sec mutants with conditional defects in the S. cerevisiae secretory pathway leading to accumulation of endoplasmic reticulum (sec18), Golgi (sec7), or secretory vesicles (sec1). A 43,000-molecular-weight (43K) glycosylated protoxin was found by pulse-labeling in all sec mutants at the restrictive temperature. In sec18 the protoxin was stable after a chase; but in sec7 and sec1 the protoxin was unstable, and in sec1 11K toxin was detected in cell lysates. The chymotrypsin inhibitor tosyl-l-phenylalanyl chloromethyl ketone (TPCK) blocked toxin secretion in vivo in wild-type cells by inhibiting protoxin cleavage. The unstable protoxin in wild-type and in sec7 and sec1 cells at the restrictive temperature was stabilized by TPCK, suggesting that the protoxin cleavage was post-sec18 and was mediated by a TPCK-inhibitable protease. Protoxin glycosylation was inhibited by tunicamycin, and a 36K protoxin was detected in inhibited cells. This 36K protoxin was processed, but toxin secretion was reduced 10-fold. We examined two kex mutants defective in toxin secretion; both synthesized a 43K protoxin, which was stable in kex1 but unstable in kex2. Protoxin stability in kex1 kex2 double mutants indicated the order kex1 --> kex2 in the protoxin processing pathway. TPCK did not block protoxin instability in kex2 mutants. This suggested that the KEX1- and KEX2-dependent steps preceded the sec7 Golgi block. We attempted to localize the protoxin in S. cerevisiae cells. Use of an in vitro rabbit reticulocyte-dog pancreas microsomal membrane system indicated that protoxin synthesized in vitro could be inserted into and glycosylated by the microsomal membranes. This membrane-associated protoxin was protected from trypsin proteolysis. Pulse-chased cells or spheroplasts, with or without TPCK, failed to secrete protoxin. The protoxin may not be secreted into the lumen of the endoplasmic reticulum, but may remain membrane associated and may require endoproteolytic cleavage for toxin secretion.

Killer Factors, Yeast↗

Yeast killer plasmid mutations affecting toxin secretion and activity and toxin immunity function.

M double-stranded RNA (MdsRNA) plasmid mutants were obtained by mutagenesis and screening of a diploid killer culture partially heat cured of the plasmid, so that a high proportion of the cells could be expected to have only on M plasmid. Mutants with neutral (nonkiller [K-], immune [R+]) or suicide (killer [K+], sensitive [R-] phenotypes were examined. All mutants became K- R- sensitives on heat curing of the MdsRNA plasmid, and showed cytoplasmic inheritance by random spore analysis. In some cases, M plasmid mutations were indicated by altered mobility of the MdsRNA by agarose gel electrophoresis or by altered size of in vitro translation products from denatured dsRNA. Neutral mutants were of two types: nonsecretors of the toxin protein or secretors of an inactive toxin. Of three neutral nonsecretors examined, one (NLP-1), probably a nonsense mutation, made a smaller protoxin precursor in vitro and in vivo, and two made full-size protoxin molecules. The in vivo protoxin of 43,000 molecular weight was unstable in the wild type and kinetically showed a precursor-product relationship to the processed, secreted 11,000-molecular-weight toxin. In one nonsecretor (N1), the protoxin appeared more stable in a pulse-chase experiment, and could be altered in a recognition site required for protein processing.

Hot Temperature↗

Yeast plasma membrane ghosts. An analysis of proteins by two-dimensional gel electrophoresis.

We have examined yeast cell ghost preparations to assess their value in obtaining plasma membrane proteins. Ghosts prepared by two methods involving stabilization of spheroplast envelopes had similar protein patterns by two-dimensional gel electrophoresis, and approximately 200 proteins were resolved. Spheroplasts were lactoperoxidase iodinated, and recovery of label in ghost preparations was greater than 60%. Spheroplasts appeared to be impermeable to the lactoperoxidase reagents as judged by an examination of two-dimensional gel electrophoretic patterns of ghost proteins that had been iodinated in spheroplasts or in unsealed ghosts. Spheroplasts were also impermeable to pronase proteases. Surface iodination and surface proteolysis allowed us to identify exposed ghost proteins; the major ghost glycoprotein was exposed in spheroplasts. Two-dimensional patterns of ghost proteins were not heavily contaminated (less than or equal to 25% of all proteins) by proteins present in soluble or promitochondrial fractions, and estimates of surface label and total cell protein recovery suggested that the ghost fraction represents a cell envelope enrichment of 8--10 fold over whole cells. Resolution of ghost proteins by two-dimensional gel electrophoresis appears to be a powerful aid toward identifying membrane proteins.

Cell Membrane↗

Binding of yeast killer toxin to a cell wall receptor on sensitive Saccharomyces cerevisiae.

35S-labeled killer toxin protein bound to cells of sensitive Saccharomyces cerevisiae S14a. Strains that were resistant to toxin through mutation in the nuclear genes kre1 kre2 bound toxin only weakly. Non-radioactive toxin competed effectively with 35S-labeled toxin for binding to S14a, but did not compete significantly in the binding to mutant kre1-1. This implied that binding to kre1-1 was nonspecific. A Scatchard analysis of the specific binding to S14a gave a linear plot, with an association constant of 2.9 x 10(6) M-1 and a receptor number of 1.1 x 10(7) per cell. Killer toxin receptors were solubilized from the cell wall by zymolyase digestion. Soluble, non-dialyzable cell wall digest from S14a competed with sensitive yeast cells for 35S-labeled toxin binding and reduced toxin-dependent killing of a sensitive strain. Wall digest from kre1-1 competed only weakly for toxin binding with sensitive cells and caused little reduction of toxin-dependent killing. Although the abundant (1.1 x 10(7) per cell) receptor appeared necessary for toxin action, as few as 2.8 x 10(4) toxin molecules were necessary to kill a sensitive cell of S14a. The kinetics killing of S14a suggested that some component was saturated with toxin at a concentration 50-fold lower than that needed to saturate the wall receptor.

Cell Wall↗