PubMed Health⌕ Search

Biomedical subjects

D T Dryden

Publications and source records attributed to D T Dryden.

At least 19 recordsLinked to original sources

Crystallization and preliminary X-ray analysis of ocr, the product of gene 0.3 of bacteriophage T7.

Ocr, the product of gene 0.3 of bacteriophage T7, prevents the action of restriction endonucleases of the host bacteria. The amino-acid sequence of ocr has less than 20% similarity to any protein of known three-dimensional structure. Ocr has been crystallized in a number of different crystal forms and X-ray data for the seleno-L-methionine-substituted form has been collected to a resolution of 1.8 A. The presence of caesium was found to be required for good crystal growth. Anomalous X-ray data was used to identify possible positions for Se and Cs atoms in the unit cell.

Amino Acid Sequence↗

Nucleoside triphosphate-dependent restriction enzymes.

The known nucleoside triphosphate-dependent restriction enzymes are hetero-oligomeric proteins that behave as molecular machines in response to their target sequences. They translocate DNA in a process dependent on the hydrolysis of a nucleoside triphosphate. For the ATP-dependent type I and type III restriction and modification systems, the collision of translocating complexes triggers hydrolysis of phosphodiester bonds in unmodified DNA to generate double-strand breaks. Type I endonucleases break the DNA at unspecified sequences remote from the target sequence, type III endonucleases at a fixed position close to the target sequence. Type I and type III restriction and modification (R-M) systems are notable for effective post-translational control of their endonuclease activity. For some type I enzymes, this control is mediated by proteolytic degradation of that subunit of the complex which is essential for DNA translocation and breakage. This control, lacking in the well-studied type II R-M systems, provides extraordinarily effective protection of resident DNA should it acquire unmodified target sequences. The only well-documented GTP-dependent restriction enzyme, McrBC, requires methylated target sequences for the initiation of phosphodiester bond cleavage.

DNA↗

Shape of Ocr, the gene 0.3 protein of bacteriophage T7: modeling based on light scattering experiments.

Ocr, the first protein expressed by bacteriophage T7, inhibits type Iota DNA restriction enzymes by preventing them from binding to DNA. This inhibition allows the phage to successfully infect the host. The shape of ocr is modeled on the basis of static and dynamic light scattering measurements. The static light scattering data confirm previous observations that ocr exists in solution as a dimer. The diffusion constant determined by dynamic light scattering indicates a nonspherical shape of the ocr dimer. Hydrodynamic models of ellipsoids are presented, and it is argued that ocr is best described by a prolate ellipsoid with dimensions of 10.4 nm by 2.6 nm. The size and shape predicted by this model are consistent with ocr acting as a mimic of the DNA structure bound by type Iota restriction enzymes.

Bacteriophage T7↗

Characterisation of the structure of ocr, the gene 0.3 protein of bacteriophage T7.

The product of gene 0.3 of bacteriophage T7, ocr, is a potent inhibitor of type I DNA restriction and modification enzymes. We have used biophysical methods to examine the mass, stability, shape and surface charge distribution of ocr. Ocr is a dimeric protein with hydrodynamic behaviour equivalent to a prolate ellipsoid of axial ratio 4.3 +/- 0.7:1 and mass of 27 kDa. The protein is resistant to denaturation but removal of the C-terminal region reduces stability substantially. Six amino acids, N4, D25, N43, D62, S68 and W94, are all located on the surface of the protein and N4 and S68 are also located at the interface between the two 116 amino acid monomers. Negatively charged amino acid side chains surround W94 but these side chains are not part of the highly acidic C-terminus after W94. Ocr is able to displace a short DNA duplex from the binding site of a type I enzyme with a dissociation constant of the order of 100 pM or better. These results suggest that ocr is of a suitable size and shape to effectively block the DNA binding site of a type I enzyme and has a large negatively charged patch on its surface. This charge distribution may be complementary to the charge distribution within the DNA binding site of type I DNA restriction and modification enzymes.

Amino Acids↗

DNA recognition by the methyl-CpG binding domain of MeCP2.

The methyl-CpG binding domain (MBD) of the transcriptional repressor MeCP2 has been proposed to recognize a single symmetrically methylated CpG base pair via hydrophobic patches on an otherwise positively charged DNA binding surface. We have tested this binding model by analysis of mutant derivatives of the MeCP2 MBD in electrophoretic mobility shift assays complemented by NMR structural analysis. Exposed arginine side chains on the binding face, in particular Arg-111, were found to be critical for binding. Arg-111 was found to interact with the conserved aspartate side chain Asp-121, which is proposed to orientate the arginine side chain to allow specific contacts with the DNA. The conformational flexibility of the disordered B-C loop region, which forms part of the binding face, was also shown to be important. In contrast, mutation of the exposed hydrophobic side chains had a less severe effect on DNA binding. This suggests that the Arg-111 side chain may contribute to sequence-specific recognition of the CpG site rather than simply making nonspecific contacts with the phosphate backbone. The majority of missense mutations within the MBD found in the human genetic disorder Rett syndrome were shown or predicted to affect folding of the domain rather than the DNA recognition event directly.

Alanine↗

Translocation-independent dimerization of the EcoKI endonuclease visualized by atomic force microscopy.

Bacterial type I restriction/modification systems are capable of performing multiple actions in response to the methylation pattern on their DNA recognition sequences. The enzymes making up these systems serve to protect the bacterial cells against viral infection by binding to their recognition sequences on the invading DNA and degrading it after extensive ATP-driven translocation. DNA cleavage has been thought to occur as the result of a collision between two translocating enzyme complexes. Using atomic force microscopy (AFM), we show here that EcoKI dimerizes rapidly when bound to a plasmid containing two recognition sites for the enzyme. Dimerization proceeds in the absence of ATP and is also seen with an EcoKI mutant (K477R) that is unable to translocate DNA. Only monomers are seen when the enzyme complex binds to a plasmid containing a single recognition site. Based on our results, we propose that the binding of EcoKI to specific DNA target sequences is accompanied by a conformational change that leads rapidly to dimerization. This event is followed by ATP-dependent translocation and cleavage of the DNA.

DNA Restriction Enzymes↗

Central modules of the vaccinia virus complement control protein are not in extensive contact.

The 28.6 kDa vaccinia virus complement control protein (VCP) is an inhibitor of the complement system and has therapeutic potential. It is composed of four domains or modules and is a homologue of complement receptor 1 (CR1) and other mammalian regulators of complement activation. A key aspect to structure-function relationships in these proteins is the extent of intramolecular module-module interactions, since these dictate the overall shape and flexibility of the molecules. A protein fragment (VCP approximately 2,3) encompassing modules 2 and 3 of VCP was over-expressed in Pichia pastoris. Ultracentrifugation showed that VCP approximately 2,3 is highly asymmetric with an axial ratio of 5.3:1, which is consistent with an end-to-end arrangement of the two modules. NMR spectroscopy, differential scanning calorimetry, CD and intrinsic tryptophan fluorescence were used to monitor unfolding of VCP approximately 2,3. Experiments performed over a range of temperatures and concentrations of guanidinium chloride revealed that module 2 unfolds under milder conditions than, and independently of, module 3. Unfolding of module 2 is not associated with extensive changes in amide (15)N and (1)H chemical shifts of module 3, implying that the modules do not form an extensive intermodular interface. Results obtained in this work for VCP approximately 2,3 are compared with those obtained in a study of CR1 modules 15-17 [Kirkitadze, Krych, Uhrin, Dryden, Smith, Cooper, Wang, Hauhart, Atkinson and Barlow (1999) Biochemistry 38, 7019-7031].

Amino Acid Sequence↗

Co-operativity between modules within a C3b-binding site of complement receptor type 1.

Complement receptor type 1 (CR1) has 30 modules in its extracellular portion. An understanding of structure-function relationships within CR1 is being assembled gradually from studies of overlapping protein fragments. A CR1 fragment corresponding to modules 16 and 17 was expressed recombinantly as a non-glycosylated protein and its stability and unfolding characteristics studied using biophysical techniques. The results were compared with data collected previously on a CR1 fragment encompassing modules 15, 16 and 17 which together constitute a C3b-binding site (Kirkitadze, M.D., Krych, M., Uhrin, D. , Dryden, D.T.F., Smith, B.O., Wang, X., Hauhart, R., Atkinson, J.P. and Barlow, P.N. (1999) Biochemistry 38, 7019-7031). Modules within CR1 were found to co-operate during unfolding. The folding, stability and flexibility of this protein is therefore likely to be a complex function, and not just the sum, of contributions from individual modules.

Binding Sites↗

On the structure and operation of type I DNA restriction enzymes.

Type I DNA restriction enzymes are large, molecular machines possessing DNA methyltransferase, ATPase, DNA translocase and endonuclease activities. The ATPase, DNA translocase and endonuclease activities are specified by the restriction (R) subunit of the enzyme. We demonstrate that the R subunit of the Eco KI type I restriction enzyme comprises several different functional domains. An N-terminal domain contains an amino acid motif identical with that forming the catalytic site in simple restriction endonucleases, and changes within this motif lead to a loss of nuclease activity and abolish the restriction reaction. The central part of the R subunit contains amino acid sequences characteristic of DNA helicases. We demonstrate, using limited proteolysis of this subunit, that the helicase motifs are contained in two domains. Secondary structure prediction of these domains suggests a structure that is the same as the catalytic domains of DNA helicases of known structure. The C-terminal region of the R subunit can be removed by elastase treatment leaving a large fragment, stable in the presence of ATP, which can no longer bind to the other subunits of Eco KI suggesting that this domain is required for protein assembly. Considering these results and previous models of the methyltransferase part of these enzymes, a structural and operational model of a type I DNA restriction enzyme is presented.

Adenosine Triphosphate↗

Independently melting modules and highly structured intermodular junctions within complement receptor type 1.

A segment of complement receptor type 1 (CR1) corresponding to modules 15-17 was overexpressed as a functionally active recombinant protein with N-glycosylation sites ablated by mutagenesis (referred to as CR1 approximately 15-17(-)). A protein consisting of modules 15 and 16 and another corresponding to module 16 were also overexpressed. Comparison of heteronuclear nuclear magnetic resonance (NMR) spectra for the single, double, and triple module fragments indicated that module 16 makes more extensive contacts with module 15 than with module 17. A combination of NMR, differential scanning calorimetry, circular dichroism, and tryptophan-derived fluorescence indicated a complex unfolding pathway for CR1 approximately 15-17(-). As temperature or denaturant concentration was increased, the 16-17 junction appeared to melt first, followed by the 15-16 junction, and module 17 itself; finally, modules 15 and 16 became denatured. Modules 15 and 16 adopted an intermediate state prior to total denaturation. These results are compared with a previously published study [Clark, N. S., Dodd, I, Mossakowska, D. E., Smith, R. A. G., and Gore, M. G. (1996) Protein Eng. 9, 877-884] on a fragment consisting of the N-terminal three CR1 modules which appeared to melt as a single unit.

Amino Acid Sequence↗

Localization of a protein-DNA interface by random mutagenesis.

The type I restriction and modification enzymes do not possess obvious DNA-binding motifs within their target recognition domains (TRDs) of 150-180 amino acids. To identify residues involved in DNA recognition, changes were made in the amino-TRD of EcoKI by random mutagenesis. Most of the 101 substitutions affecting 79 residues had no effect on the phenotype. Changes at only seven positions caused the loss of restriction and modification activities. The seven residues identified by mutation are not randomly distributed throughout the primary sequence of the TRD: five are within the interval between residues 80 and 110. Sequence analyses have led to the suggestion that the TRDs of type I restriction enzymes include a tertiary structure similar to the TRD of the HhaI methyltransferase, and to a model for a DNA-protein interface in EcoKI. In this model, the residues within the interval identified by the five mutations are close to the protein-DNA interface. Three additional residues close to the DNA in the model were changed; each substitution impaired both activities. Proteins from twelve mutants were purified: six from mutants with partial or wild-type activity and six from mutants lacking activity. There is a strong correlation between phenotype and DNA-binding affinity, as determined by fluorescence anisotropy.

Amino Acid Sequence↗

The DNA binding characteristics of the trimeric EcoKI methyltransferase and its partially assembled dimeric form determined by fluorescence polarisation and DNA footprinting.

The type I DNA restriction and modification systems of enteric bacteria display several enzymatic activities due to their oligomeric structure. Partially assembled forms of the EcoKI enzyme from E. coli K12 can display specific DNA binding properties and modification methyltransferase activity. The heterodimer of one specificity (S) subunit and one modification (M) subunit can only bind DNA whereas the addition of a second modification subunit to form M2S1 also confers methyltransferase activity. We have examined the DNA binding specificity of M1S1 and M2S1 using the change in fluorescence anisotropy which occurs on binding of a DNA probe labelled with a hexachlorofluorescein fluorophore. The dimer has much weaker affinity for the EcoKI target sequence than the trimer and slightly less ability to discriminate against other DNA sequences. Binding of both proteins is strongly dependent on salt concentration. The fluorescence results compare favourably with those obtained with the gel retardation method. DNA footprinting using exonucleaseIII and DNaseI, and methylation interference show no asymmetry, with both DNA strands being protected by the dimer and the trimer. This indicates that the dimer is a mixture of the two possible forms, M1S1 and S1M1. The dimer has a footprint on the DNA substrate of the same length as the trimer implying that the modification subunits are located on either side of the DNA helical axis rather than lying along the helical axis.

Base Sequence↗

Sequence-specific DNA binding by EcoKI, a type IA DNA restriction enzyme.

The type I DNA restriction and modification enzymes of prokaryotes are multimeric enzymes that cleave unmethylated, foreign DNA in a complex process involving recognition of the methylation status of a DNA target sequence, extensive translocation of DNA in both directions towards the enzyme bound at the target sequence, ATP hydrolysis, which is believed to drive the translocation possibly via a helicase mechanism, and eventual endonucleolytic cleavage of the DNA. We have examined the DNA binding affinity and exonuclease III footprint of the EcoKI type IA restriction enzyme on oligonucleotide duplexes that either contain or lack the target sequence. The influence of the cofactors, S-adenosyl methionine and ATP, on binding to DNA of different methylation states has been assessed. EcoKI in the absence of ATP, with or without S-adenosyl methionine, binds tightly even to DNA lacking the target site and the exonuclease footprint is large, approximately 45 base-pairs. The protection is weaker on DNA lacking the target site. Partially assembled EcoKI lacking one or both of the subunits essential for DNA cleavage, is unable to bind tightly to DNA lacking the target site but can bind tightly to the recognition site. The addition of ATP to EcoKI, in the presence of AdoMet, allows tight binding only to the target site and the footprint shrinks to 30 base-pairs, almost identical to that of the modification enzyme which makes up the core of EcoKI. The same effect occurs when S-adenosyl homocysteine or sinefungin are substituted for S-adenosyl methionine, and ADP or ATPgammaS are substituted for ATP. It is proposed that the DNA binding surface of EcoKI comprises three regions: a "core" region which recognises the target sequence and which is present on the modification enzyme, and a region on each DNA cleavage subunit. The cleavage subunits make tight contacts to any DNA molecule in the absence of cofactors, but this contact is weakened in the presence of cofactors to allow the protein conformational changes required for DNA translocation when a target site is recognised by the core modification enzyme. This weakening of the interaction between the DNA cleavage subunits and the DNA could allow more access of exonuclease III to the DNA and account for the shorter footprint.

Adenosine Triphosphate↗

Analysis of the subunit assembly of the typeIC restriction-modification enzyme EcoR124I.

Type I restriction-modification (R-M) enzymes are composed of three different subunits, of which HsdS determines DNA specificity, HsdM is responsible for DNA methylation and HsdR is required for restriction. The HsdM and HsdS subunits can also form an independent DNA methyltransferase with a subunit stoichiometry of M2S1. We found that the purified Eco R124I R-M enzyme was a mixture of two species as detected by the presence of two differently migrating specific DNA-protein complexes in a gel retardation assay. An analysis of protein subunits isolated from the complexes indicated that the larger species had a stoichiometry of R2M2S1and the smaller species had a stoichiometry of R1M2S1. In vitro analysis of subunit assembly revealed that while binding of the first HsdR subunit to the M2S1complex was very tight, the second HsdR subunit was bound weakly and it dissociated from the R1M2S1complex with an apparent K d of approximately 2.4 x 10(-7) M. Functional assays have shown that only the R2M2S1complex is capable of DNA cleavage, however, the R1M2S1complex retains ATPase activity. The relevance of this situation is discussed in terms of the regulation of restriction activity in vivo upon conjugative transfer of a plasmid-born R-M system into an unmodified host cell.

Adenosine Triphosphatases↗

A prediction of the amino acids and structures involved in DNA recognition by type I DNA restriction and modification enzymes.

The S subunits of type I DNA restriction/modification enzymes are responsible for recognising the DNA target sequence for the enzyme. They contain two domains of approximately 150 amino acids, each of which is responsible for recognising one half of the bipartite asymmetric target. In the absence of any known tertiary structure for type I enzymes or recognisable DNA recognition motifs in the highly variable amino acid sequences of the S subunits, it has previously not been possible to predict which amino acids are responsible for sequence recognition. Using a combination of sequence alignment and secondary structure prediction methods to analyse the sequences of S subunits, we predict that all of the 51 known target recognition domains (TRDs) have the same tertiary structure. Furthermore, this structure is similar to the structure of the TRD of the C5-cytosine methyltransferase, Hha I, which recognises its DNA target via interactions with two short polypeptide loops and a beta strand. Our results predict the location of these sequence recognition structures within the TRDs of all type I S subunits.

Amino Acid Sequence↗

The in vitro assembly of the EcoKI type I DNA restriction/modification enzyme and its in vivo implications.

Type I DNA restriction/modification enzymes protect the bacterial cell from viral infection by cleaving foreign DNA which lacks N6-adenine methylation within a target sequence and maintaining the methylation of the targets on the host chromosome. It has been noted that the genes specifying type I systems can be transferred to a new host lacking the appropriate, protective methylation without any adverse effect. The modification phenotype apparently appears before the restriction phenotype, but no evidence for transcriptional or translational control of the genes and the resultant phenotypes has been found. Type I enzymes contain three types of subunit, S for sequence recognition, M for DNA modification (methylation), and R for DNA restriction(cleavage), and can function solely as a M2S1 methylase or as a R2M2S1 bifunctional methylase/nuclease. We show that the methylase is not stable at the concentrations expected to exist in vivo, dissociating into free M subunit and M1S1, whereas the complete nuclease is a stable structure. The M1S1 form can bind the R subunit as effectively as the M2S1 methylase but possesses no activity; therefore, upon establishment of the system in a new host, we propose that most of the R subunit will initially be trapped in an inactive complex until the methylase has been able to modify and protect the host chromosome. We believe that the in vitro assembly pathway will reflect the in vivo situation, thus allowing the assembly process to at least partially explain the observations that the modification phenotype appears before the restriction phenotype upon establishment of a type I system in a new host cell.

Chromatography, Gel↗