PubMed Health⌕ Search

Biomedical subjects

D Thuault

Publications and source records attributed to D Thuault.

10 recordsLinked to original sources
PubMed2006

Heat resistance of coliform species isolated from cooked ham, snail flesh, and 'bouchées à la reine'.

AIMS: In this study, the heat resistance of coliform species isolated from cooked ham and ready-made meals was determined. METHODS AND RESULTS: Thirteen coliform strains belonging to 12 different species were studied using laboratory medium in order to determine delta (first decimal reduction time) and z(T) values (temperature increase leading to a 10-fold reduction of delta) using the Weibull model. For seven strains, delta-values were determined at temperatures ranging from 55 to 60 degrees C, with, delta values between 0.52 and 2.98 min, at 59 degrees C. For the other six strains, lower temperature values were determined with delta-values ranging from 0.47 to 1.64 min at 54 degrees C. z(T) values calculated for the 13 strains were 3.1 to 7.5 degrees C. For eight strains, plotting of the log of survivors was not linear but rather showed shoulders or shoulders and tails. CONCLUSIONS: Coliform species were sensitive to heat treatment with a decimal reduction time under 2 min at 60 degrees C. SIGNIFICANCE AND IMPACT OF THE STUDY: The better knowledge of coliform heat resistance by determining thermal resistance parameters with confidence intervals will be useful for evaluating the efficiency of industrial thermal processes.

Animals↗
PubMed2003

Streptococcus thermophilus 580 produces a bacteriocin potentially suitable for inhibition of Clostridium tyrobutyricum in hard cheese.

A strain of Streptococcus thermophilus that inhibits Clostridium tyrobutyricum has been isolated from raw milk. The active compound produced disappears after a treatment with protease. However, unlike most bacteriocins, it is not thermoresistant, and the activity is completely lost after 1 h at 60 degrees C. Its inhibitory spectrum is limited to other thermophilic streptococci, Brochothrix, and sporulated gram-positive rods. So this bacteriocin could be different from those already described. This bacteriocin-producing strain could be used in thermophilic starter for hard cheese making because the bacteriocin is not active against thermophilic lactobacilli. It is produced in M17 medium during the decreasing temperature phase of the hard cheese-making process temperature cycle and is also produced in milk. Moreover, when Streptococcus thermophilus was cocultured with a Lactobacillus delbrueckii subsp. lactis starter strain, it seems to enhance the bacteriocin production. However the level of activity always decreases drastically during the stationary phase. But inhibition of Clostridium tyrobutyricum spores can be obtained in small-scale curds.

Animals↗
PubMed2002

Modelling the growth kinetics of Listeria as a function of temperature, pH and organic acid concentration.

The combined effects of temperature, pH and organic acids (lactic, acetic and propionic) on the growth kinetics of Listeria innocua ATCC 33090 were studied. First, a multiplicative model was built assuming independent effects of all environmental factors. Thus, the model was expanded by the inclusion of a novel term describing the effects of interactions on the growth/no growth limits. The proposed approach allows an accurate description of the boundary between growth and no growth of Listeria.

Acetic Acid↗
PubMed2002

Modelling microbial growth in structured foods: towards a unified approach.

Historically, the ability of foods to support the growth of spoilage organisms and food-borne pathogens has been assessed by inoculating a food with an organism of interest, and following its growth over a period of time. Information gained from such challenge tests, together with knowledge of the organoleptic stability of the product, can then be used to determine an appropriate shelf-life for the food. Whilst this approach may be seen as the "gold-standard" of microbiological assessment of food, it is both time-consuming and costly. A major advance to complement challenge testing was the development of predictive modelling, when it was demonstrated that the growth of a wide range of organisms of interest could be quite accurately modelled as a function of only a few environmental parameters-primarily temperature, pH and water activity (a(w)), with perhaps other factors such as nitrite, organic acids and oxygen. This approach to predictive microbiology is embodied in software tools such as the UK Food MicroModel and the Pathogen Modeling Program from the USA. Whilst modelling of this form yields accurate predictions of the growth of organisms in the majority of foods, there are occasions when there are discrepancies between the model and the observed growth. These discrepancies are most often described as "fail-safe", i.e. the observed growth is slower than predicted by the model. This paper examines the role of food structure in the development of microbial populations and communities, and describes the methodologies we propose to begin to tackle some of these complex and interlinked issues.

Bacteria↗
PubMed1997

Modelling Bacillus cereus growth.

The aim of this study was to model the growth, in a model system, of toxigenic strains of Bacillus cereus as a function of temperature, pH and water activity. Optical density (OD) values were transformed into numbers of colony-forming units (CFU) by the use of a 'calibrating' relation. The growth curves were then fitted to the Gompertz function which allowed the estimation of the lag-time (lambda) and the growth rate (mu). These two parameters were then modelled according to the controlling factors which were pH and water activity at 20 and 30 degrees C.

Bacillus cereus↗
PubMed1995

Characterization of diacetin B, a bacteriocin from Lactococcus lactis subsp. lactis bv. diacetylactis UL720.

Fourteen Lactococcus lactis strains showing inhibitory activity against Listeria innocua SICC 4202 were isolated from different French raw milks and raw milk cheeses and screened for bacteriocin production by the triple layer method under conditions that eliminate the effects of lactic acid and hydrogen peroxide. Three bacteriocinogenic strains (two Lactococcus lactis subsp. lactis bv. diacetylactis UL719 and UL720 and one Lactococcus lactis subsp. lactis UL730) were selected for their high capacity to inhibit the growth of various food pathogens, including Listeria monocytogenes, Staphylococcus aureus, and clostridial strains. The inhibitory compounds from these three strains are inactivated by selected proteases, indicating their protein nature. They retained their antibacterial activity after heat treatments of 100 degrees C for 60 min and 121 degrees C for 20 min, and in the pH range from 2 to 11. The bacteriocin diacetin B produced by strain UL720 has been purified by a pH-dependent adsorption-desorption procedure, followed by reverse-phase high performance liquid chromatography, with a yield of 1.25% of the original activity. Mass spectrometry analysis indicates that the pure peptide has a molecular mass of 4292.32 or 4490.28 Da, while amino acid sequencing allowed the identification of the primary structure of the bacteriocin composed of 37 amino acid residues. The structure of the peptide did not show similarity with other known bacteriocins from lactic acid bacteria.

Amino Acid Sequence↗
PubMed1992

Development of a Method for Detection of Lactic Acid Bacteria Producing Exclusively the l-(+)- Isomer of Lactic Acid.

A method was developed for the detection and isolation, within a population of lactic acid bacteria, of strains producing exclusively the l-(+)- isomer of lactic acid; the visual detection of colonies of these particular strains can be carried out directly on agar plates (50 to 70 colonies per plate). The method is based on an enzymatic stereospecific reaction involving d-(-)-lactate dehydrogenase and linked to a staining reaction; the diffusion area of the d-(-)- isomer stains red around the d-(-)- and the dl-lactic acid-producing colonies, while the colonies producing exclusively l-(+)-lactic acid are detected by the absence of the colored halo. The intensity of staining was increased when cellulose powder and Tween 20 were added to the agar medium.

Journal Article↗
PubMed1991

Plasmid-encoded determinants for bacteriocin production and immunity in a Lactococcus lactis strain and purification of the inhibitory peptide.

Lactococcin, a bacteriocin produced by Lactococcus lactis subsp. lactis ADRIA 85LO30, was purified as a 2.3-2.4 kDa peptide. Six non-bacteriocin-producing (Bac-) and non-immune (Imm-) strains were isolated after curing experiments. These strains had in common the loss or modification of two plasmids: pOS4 (32 kb) and pOS5 (70 kb). By comparing pOS5 and several modified plasmids, a DNA region from pOS5 of about 10 kb, which was necessary for wild-type bacteriocin production and immunity, was identified.

Bacteriocins↗
PubMed1991

Inhibition of Clostridium tyrobutyricum by bacteriocin-like substances produced by lactic acid bacteria.

Lactic acid bacteria were selected for their inhibitory activity against Clostridium tyrobutyricum under conditions that eliminate the effects of lactic acid and hydrogen peroxide. Four strains were isolated belonging to the species Lactococcus lactis ssp. lactis. The sensitivity of the inhibitory substances to pronase and trypsine indicates that they are proteins or peptides different from nisin. Their resistance to phospholipase D indicates that they are also different from lactostrepcin. The inhibitory substances are produced during the exponential phase of growth. Their activity is bactericidal and directed toward some strains of Clostridium tyrobutyricum, Lactobacillus helveticus, and Streptococcus thermophilus, but strains used as dairy starters, Lactobacillus lactis, Streptococcus thermophilus, and Propionibacterium shermanii, are not all affected by the inhibition.

Animals↗