Biomedical subjects

D Zaslavsky

Publications and source records attributed to D Zaslavsky.

8 recordsLinked to original sources

PubMed2001

Exposure of bovine cytochrome c oxidase to high triton X-100 or to alkaline conditions causes a dramatic change in the rate of reduction of compound F.

The final step in the catalytic cycle of cytochrome oxidase, the reduction of oxyferryl heme a(3) in compound F, was investigated using a binuclear polypyridine ruthenium complex ([Ru(bipyridine)(2)](2)(1,4-bis[2-(4'-methyl-2, 2'-bipyrid-4-yl)ethenyl]benzene)(PF(6))(4)) as a photoactive reducing agent. In the untreated dimeric enzyme, the rate constant for reduction of compound F decreased from 700 s(-1) to 200 s(-1) as the pH was increased from 7.5 to 9.5. Incubation of dimeric enzyme at pH 10 led to an increase in the rate constant to 1650 s(-1), which was independent of pH between pH 7.4 and 10. This treatment resulted in a decrease in the sedimentation coefficient consistent with the irreversible conversion of the enzyme to a monomeric form. Similar results were obtained when the enzyme was incubated with Triton X-100 at pH 8.0. These treatments, which have traditionally been used to convert dimeric enzyme to monomeric form, have no effect on the steady-state activity. The data indicate that either the conversion of the bovine oxidase to a monomeric form or some structural change coincident with this conversion strongly influences the rate constant of this step in the catalytic cycle, perhaps by influencing the proton access to the heme-copper binuclear center.

Animals↗

PubMed2000

Proton pumping by cytochrome oxidase: progress, problems and postulates.

The current status of our knowledge about the mechanism of proton pumping by cytochrome oxidase is discussed. Significant progress has resulted from the study of site-directed mutants within the proton-conducting pathways of the bacterial oxidases. There appear to be two channels to facilitate proton translocation within the enzyme and they are important at different parts of the catalytic cycle. The use of hydrogen peroxide as an alternative substrate provides a very useful experimental tool to explore the enzymology of this system, and insights gained from this approach are described. Proton transfer is coupled to and appears to regulate the rate of electron transfer steps during turnover. It is proposed that the initial step in the reaction involves a proton transfer to the active site that is important to convert metal-ligated hydroxide to water, which can more rapidly dissociate from the metals and allow the reaction with dioxygen which, we propose, can bind the one-electron reduced heme-copper center. Coordinated movement of protons and electrons over both short and long distances within the enzyme appear to be important at different parts of the catalytic cycle. During the initial reduction of dioxygen, direct hydrogen transfer to form a tyrosyl radical at the active site seems likely. Subsequent steps can be effectively blocked by mutation of a residue at the surface of the protein, apparently preventing the entry of protons.

Animals↗

PubMed1999

Examination of the reaction of fully reduced cytochrome oxidase with hydrogen peroxide by flow-flash spectroscopy.

The reaction of cytochrome c oxidase with hydrogen peroxide has been of great value in generating and characterizing oxygenated species of the enzyme that are identical or similar to those formed during turnover of the enzyme with dioxygen. Most previous studies have utilized relatively low peroxide concentrations (millimolar range). In the current work, these studies have been extended to the examination of the kinetics of the single turnover of the fully reduced enzyme using much higher concentrations of peroxide to avoid limitations by the bimolecular reaction. The flow-flash method is used, in which laser photolysis of the CO adduct of the fully reduced enzyme initiates the reaction following rapid mixing of the enzyme with peroxide, and the reaction is monitored by observing the absorbance changes due to the heme components of the enzyme. The following reaction sequence is deduced from the data. (1) The initial product of the reaction appears to be heme a(3) oxoferryl (Fe(4+)=O(2)(-) + H(2)O). Since the conversion of ferrous to ferryl heme a(3) (Fe(2+) to Fe(4+)) is sufficient for this reaction, presumably Cu(B) remains reduced in the product, along with Cu(A) and heme a. (2) The second phase of the reaction is an internal rearrangement of electrons and protons in which the heme a(3) oxoferryl is reduced to ferric hydroxide (Fe(3+)OH(-)). In about 40% of the population, the electron comes from heme a, and in the remaining 60% of the population, Cu(B) is oxidized. This step has a time constant of about 65 micros. (3) The third apparent phase of the reaction includes two parallel reactions. The population of the enzyme with an electron in the binuclear center reacts with a second molecule of peroxide, forming compound F. The population of the enzyme with the two electrons on heme a and Cu(A) must first transfer an electron to the binuclear center, followed by reaction with a second molecule of peroxide, also yielding compound F. In each of these reaction pathways, the reaction time is 100-200 micros, i.e., much faster than the rate of reaction of peroxide with the fully oxidized enzyme. Thus, hydrogen peroxide is an efficient trap for a single electron in the binuclear center. (4) Compound F is then reduced by the final available electron, again from heme a, at the same rate as observed for the reduction of compound F formed during the reaction of the fully reduced oxidase with dioxygen. The product is the fully oxidized enzyme (heme a(3) Fe(3+)OH(-)), which reacts with a third molecule of hydrogen peroxide, forming compound P. The rate of this final reaction step saturates at high concentrations of peroxide (V(max) = 250 s(-)(1), K(m) = 350 mM). The data indicate a reaction mechanism for the steady-state peroxidase activity of the enzyme which, at pH 7.5, proceeds via the single-electron reduction of the binuclear center followed by reaction with peroxide to form compound F directly, without forming compound P. Peroxide is an efficient trap for the one-electron-reduced state of the binuclear center. The results also suggest that the reaction of hydrogen peroxide to the fully oxidized enzyme may be limited by the presence of hydroxide associated with the heme a(3) ferric species. The reaction of hydrogen peroxide with heme a(3) is very substantially accelerated by the availability of an electron on heme a, which is presumably transferred to the binuclear center concomitant with a proton that can convert the hydroxide to water, which is readily displaced.

Catalysis↗

PubMed1999

Glutamate-89 in subunit II of cytochrome bo3 from Escherichia coli is required for the function of the heme-copper oxidase.

Recent electrostatics calculations on the cytochrome c oxidase from Paracoccus denitrificans revealed an unexpected coupling between the redox state of the heme-copper center and the state of protonation of a glutamic acid (E78II) that is 25 A away in subunit II of the oxidase. Examination of more than 300 sequences of the homologous subunit in other heme-copper oxidases shows that this residue is virtually totally conserved and is in a cluster of very highly conserved residues at the "negative" end (bacterial cytoplasm or mitochondrial matrix) of the second transmembrane helix. The functional importance of several residues in this cluster (E89II, W93II, T94II, and P96II) was examined by site-directed mutagenesis of the corresponding region of the cytochrome bo(3) quinol oxidase from Escherichia coli (where E89II is the equivalent of residue E78II of the P. denitrificans oxidase). Substitution of E89II with either alanine or glutamine resulted in reducing the rate of turnover to about 43 or 10% of the wild-type value, respectively, whereas E89D has only about 60% of the activity of the control oxidase. The quinol oxidase activity of the W93V mutant is also reduced to about 30% of that of the wild-type oxidase. Spectroscopic studies with the purified E89A and E89Q mutants indicate no perturbation of the heme-copper center. The data suggest that E89II (E. coli numbering) is critical for the function of the heme copper oxidases. The proximity to K362 suggests that this glutamic acid residue may regulate proton entry or transit through the K-channel. This hypothesis is supported by the finding that the degree of oxidation of the low-spin heme b is greater in the steady state using hydrogen peroxide as an oxidant in place of dioxygen for the E89Q mutant. Thus, it appears that the inhibition resulting from the E89II mutation is due to a block in the reduction of the heme-copper binuclear center, expected for K-channel mutants.

Alanine↗

PubMed1999

Observation of a novel transient ferryl complex with reduced CuB in cytochrome c oxidase.

The reaction between mixed-valence (MV) cytochrome c oxidase from beef heart with H2O2 was investigated using the flow-flash technique with a high concentration of H2O2 (1 M) to ensure a fast bimolecular interaction with the enzyme. Under anaerobic conditions the reaction exhibits 3 apparent phases. The first phase (tau congruent with 25 micros) results from the binding of one molecule of H2O2 to reduced heme a3 and the formation of an intermediate which is heme a3 oxoferryl (Fe4+=O2-) with reduced CuB (plus water). During the second phase (tau congruent with 90 micros), the electron transfer from CuB+ to the heme oxoferryl takes place, yielding the oxidized form of cytochrome oxidase (heme a3 Fe3+ and CuB2+, plus hydroxide). During the third phase (tau congruent with 4 ms), an additional molecule of H2O2 binds to the oxidized form of the enzyme and forms compound P, similar to the product observed upon the reaction of the mixed-valence (i.e., two-electron reduced) form of the enzyme with dioxygen. Thus, within about 30 ms the reaction of the mixed-valence form of the enzyme with H2O2 yields the same compound P as does the reaction with dioxygen, as indicated by the final absorbance at 436 nm, which is the same in both cases. This experimental approach allows the investigation of the form of cytochrome c oxidase which has the heme a3 oxoferryl intermediate but with reduced CuB. This state of the enzyme cannot be obtained from the reaction with dioxygen and is potentially useful to address questions concerning the role of the redox state in CuB in the proton pumping mechanism.

Animals↗

PubMed1998

Single electron reduction of cytochrome c oxidase compound F: resolution of partial steps by transient spectroscopy.

The final step of the catalytic cycle of cytochrome oxidase, the reduction of oxyferryl heme a3 in compound F, was investigated using a binuclear polypyridine ruthenium complex (Ru2C) as a photoactive reducing agent. The net charge of +4 on Ru2C allows it to bind electrostatically near CuA in subunit II of cytochrome oxidase. Photoexcitation of Ru2C with a laser flash results in formation of a metal-to-ligand charge-transfer excited state, Ru2C, which rapidly transfers an electron to CuA of cytochrome oxidase from either beef heart or Rhodobacter sphaeroides. This is followed by reversible electron transfer from CuA to heme a with forward and reverse rate constants of k1 = 9.3 x 10(4) s-1 and k-1 = 1.7 x 10(4) s-1 for R. sphaeroides cytochrome oxidase in the resting state. Compound F was prepared by treating the resting enzyme with excess hydrogen peroxide. The value of the rate constant k1 is the same in compound F where heme a3 is in the oxyferryl form as in the resting enzyme where heme a3 is ferric. Reduction of heme a in compound F is followed by electron transfer from heme a to oxyferryl heme a3 with a rate constant of 700 s-1, as indicated by transients at 605 and 580 nm. No delay between heme a reoxidation and oxyferryl heme a3 reduction is observed, showing that no electron-transfer intermediates, such as reduced CuB, accumulate in this process. The rate constant for electron transfer from heme a to oxyferryl heme a3 was measured in beef cytochrome oxidase from pH 7.0 to pH 9.5, and found to decrease upon titration of a group with a pKa of 9.0. The rate constant is slower in D2O than in H2O by a factor of 4.3, indicating that the electron-transfer reaction is rate-limited by a proton-transfer step. The pH dependence and deuterium isotope effect for reduction of isolated compound F are comparable to that observed during reaction of the reduced, CO-inhibited CcO with oxygen by the flow-flash technique. This result indicates that electron transfer from heme a to oxyferryl heme a3 is not controlled by conformational effects imposed by the initial redox state of the enzyme. The rate constant for electron transfer from heme a to oxyferryl heme a3 is the same in the R. sphaeroides K362M CcO mutant as in wild-type CcO, indicating that the K-channel is not involved in proton uptake during reduction of compound F.

2,2'-Dipyridyl↗

PubMed1998

Substitution of lysine-362 in a putative proton-conducting channel in the cytochrome c oxidase from Rhodobacter sphaeroides blocks turnover with O2 but not with H2O2.

The recently reported X-ray structures of cytochrome oxidase reveal structures that are likely proton-conducting channels. One of these channels, leading from the negative aqueous surface to the heme a3/CuB bimetallic center, contains a lysine as a central element. Previous work has shown that this lysine (K362 in the oxidase from Rhodobacter sphaeroides) is essential for cytochrome c oxidase activity. The data presented demonstrate that the K362M mutant is impeded in the reduction of the heme a3/CuB bimetallic center, probably by interfering with the intramolecular movement of protons. The reduction of the heme-copper center is required prior to the reaction with dioxygen to form the so-called peroxy intermediate (compound P). This block can be by-passed to some extent by the addition of H2O2, which can react with the enzyme without prereduction of the heme-copper center and can then be reduced to water using electrons from cytochrome c. Hence, the K362M mutant, though lacking oxidase activity, exhibits cytochrome c peroxidase activity. Rapid mixing techniques have been used to determine the kinetics of this peroxidase activity at concentrations of H2O2 up to 0.5 M. The Km for peroxide is about 50 mM and the Vmax is 50 electrons s-1, which is considerably slower than the turnover that can be obtained for the oxidase activity of the wild-type enzyme (1200 s-1). The turnover of the mutant oxidase with H2O2 appears to be limited by the rate of reaction of the enzyme with peroxide to form compound P, rather than the rate of reduction of compound P to water by cytochrome c. The data require a reexamination of the proposed roles of the putative proton-conducting channels.

Catalysis↗

PubMed1993

Flash-induced membrane potential generation by cytochrome c oxidase.

Flash-induced single-electron reduction of cytochrome c oxidase. Compound F (oxoferryl state) by RuII(2,2'-bipyridyl)3(2+) [Nilsson (1992) Proc. Natl. Acad. Sci. USA 89, 6497-6501] gives rise to three phases of membrane potential generation in proteoliposomes with tau values and contributions of ca. 45 microsecond (20%), 1 ms (20%) and 5 ms (60%). The rapid phase is not sensitive to the binuclear centre ligands, such as cyanide or peroxide, and is assigned to vectorial electron transfer from CuA to heme a. The two slow phases kinetically match reoxidation of heme a, require added H2O2 or methyl peroxide for full development, and are completely inhibited by cyanide; evidently, they are associated with the reduction of Compound F to the Ox state by heme a. The charge transfer steps associated with the F to Ox conversion are likely to comprise (i) electrogenic uptake of a 'chemical' proton from the N phase required for protonation of the reduced oxygen atom and (ii) electrogenic H+ pumping across the membrane linked to the F to Ox transition. Assuming heme a 'electrical location' in the middle of the dielectric barrier, the ratio of the rapid to slow electrogenic phase amplitudes indicates that the F to Ox transition is linked to transmembrane translocation of 1.5 charges (protons) in addition to an electrogenic uptake of one 'chemical' proton required to form Fe(3+)-OH- from Fe4+ = O2-. The shortfall in the number of pumped protons and the biphasic kinetics of the millisecond part of the electric response matching biphasic reoxidation of heme a may indicate the presence of 2 forms of Compound F, reduction of only one of which being linked to full proton pumping.

Animals↗