PubMed Health⌕ Search

Biomedical subjects

Daniel J Müller

Publications and source records attributed to Daniel J Müller.

18 recordsLinked to original sources

Fourteen protomers compose the oligomer III of the proton-rotor in spinach chloroplast ATP synthase.

Three fundamentally different chloroplast ATP synthase samples of increasing complexity were visualized by atomic force microscopy. The samples are distinguishable in respect to the isolation technique, the detergent employed, and the final subunit composition. The homo-oligomer III was isolated following SDS treatment of ATP synthase, the proton-turbine III+IV was obtained by blue-native electrophoresis, and complete CFO was isolated by anion exchange chromatography of NaSCN splitted ATP synthase. In all three ATP synthase subcomplexes 14 and only 14 circularly arranged subunits III composed the intact transmembrane rotor. Therefore, 14 protomers built the membrane-resident proton turbine. The observed stoichiometry of 14 is not a biochemical artifact or affected by natural growth variations of the spinach, as previously suggested. A correlation between the presence of subunit IV in the imaged sample and the appearance of a central protrusion in the narrower orifice of the oligomeric cylinder III14 has been observed. In contrast to current predictions, in chloroplast FO the subunit IV can be found inside the cylinder III14 and not at its periphery, at least in the reconstituted 2D arrays imaged.

Chloroplast Proton-Translocating ATPases↗

Unfolding pathways of native bacteriorhodopsin depend on temperature.

The combination of high-resolution atomic force microscopy (AFM) imaging and single-molecule force-spectroscopy was employed to unfold single bacteriorhodopsins (BR) from native purple membrane patches at various physiologically relevant temperatures. The unfolding spectra reveal detailed insight into the stability of individual structural elements of BR against mechanical unfolding. Intermittent states in the unfolding process are associated with the stepwise unfolding of alpha-helices, whereas other states are associated with the unfolding of polypeptide loops connecting the alpha-helices. It was found that the unfolding forces of the secondary structures considerably decreased upon increasing the temperature from 8 to 52 degrees C. Associated with this effect, the probability of individual unfolding pathways of BR was significantly influenced by the temperature. At lower temperatures, transmembrane alpha-helices and extracellular polypeptide loops exhibited sufficient stability to individually establish potential barriers against unfolding, whereas they predominantly unfolded collectively at elevated temperatures. This suggests that increasing the temperature decreases the mechanical stability of secondary structural elements and changes molecular interactions between secondary structures, thereby forcing them to act as grouped structures.

Bacteriorhodopsins↗

Observing the growth of individual actin filaments in cell extracts by time-lapse atomic force microscopy.

High-resolution atomic force microscopy (AFM) was applied to directly observe the dynamic assembly of single actin filaments in HeLa cell extracts in vitro. The F-actin filaments established a dynamic network and formed different types of junctions and branches. The connections of this network were X-, Y- or T-shaped. It was found that the actin filaments were densely covered by endosomes and vesicles from the cell extract, which are thought to stabilize their structures. Using time-lapse AFM, the growth, shrinkage, branching and the interaction of actin filaments with endosomes could be characterized. Our results indicate that the majority of F-actin filaments are static in HeLa extract and that only a minor fraction of filaments undergo dynamic changes. Furthermore, the AFM imaging approach not only provides unique insights into the assembly and dynamics of actin networks; it also builds an avenue to study in vitro assays of complex biological systems.

Actin Cytoskeleton↗

Observing membrane protein diffusion at subnanometer resolution.

Single sodium-driven rotors from a bacterial ATP synthase were embedded into a lipid membrane and observed in buffer solution at subnanometer resolution using atomic force microscopy (AFM). Time-lapse AFM topographs show the movement of single proteins within the membrane. Subsequent analysis of their individual trajectories, in consideration of the environment surrounding the moving protein, allow principal modes of the protein motion to be distinguished. Within one trajectory, individual proteins can undergo movements assigned to free as well as to obstacled diffusion. The diffusion constants of these two modes of motion are considerably different. Without the structural information about the membrane environment restricting the moving proteins, it would not be possible to reveal insight into these mechanisms. The high-resolution AFM topographs suggest that, in future studies, such data revealed under various physiological conditions will provide novel insights into molecular mechanisms that drive membrane protein assembly and supply excellent boundary conditions to model protein-protein arrangements.

Diffusion↗

Determining molecular forces that stabilize human aquaporin-1.

Atomic force microscopy (AFM) was used to measure the forces stabilizing human aquaporin-1 (hAQP1), a tetrameric transmembrane protein that forms highly specific water channels. To this end, the AFM tip was attached to the C-terminus of hAQP1 and secondary structure elements were extracted from the membrane while the single-molecule force-extension curve was being recorded. Force peaks, reflecting the unfolding of secondary structure elements, could be interpreted in depth using the atomic model of hAQP1. Different classes of force-extension curves indicated the existence of alternative unfolding pathways for individual proteins. In addition, transmembrane helices at the periphery of the hAQP1 tetramer exhibited smaller extraction forces than helices at the interface between hAQP1 monomers. These results represent the first direct assessment of intermolecular forces defining the oligomeric state of a membrane protein.

Aquaporin 1↗

Conformational changes in surface structures of isolated connexin 26 gap junctions.

Gap junction channels mediate communication between adjacent cells. Using atomic force microscopy (AFM), we have imaged conformational changes of the cytoplasmic and extracellular surfaces of native connexin 26 gap junction plaques. The cytoplasmic domains of the gap junction surface, imaged at submolecular resolution, form a hexameric pore protruding from the membrane bilayer. Exhibiting an intrinsic flexibility, these cytoplasmic domains, comprising the C-terminal connexin end, reversibly collapse by increasing the forces applied to the AFM stylus. The extracellular connexon surface was imaged after dissection of the gap junction with the AFM stylus. Upon injection of Ca(2+) into the buffer solution, the extracellular channel entrance reduced its diameter from 1.5 to 0.6 nm, a conformational change that is fully reversible and specific among the divalent cations tested. Ca(2+) had a profound effect on the cytoplasmic surface also, inducing the formation of microdomains. Consequently, the plaque height increased by 0.6 nm to 18 nm. This suggests that calcium ions induce conformational changes affecting the structure of both the hemichannels and the intact channels forming cell-cell contacts.

Connexin 26↗

Association study between two variants in the DOPA decarboxylase gene in bipolar and unipolar affective disorder.

Irregularities of dopaminergic and serotonergic neurotransmission have been implicated in a variety of neuropsychiatric disorders. DOPA decarboxylase (DDC), also known as aromatic L-amino acid decarboxylase, is an enzyme involved directly in the synthesis of dopamine and serotonin and indirectly in the synthesis of noradrenaline. Therefore, the DDC gene can be considered as a candidate gene for affective disorders. Recently, two novel variants were reported in the DDC gene: a 1-bp deletion in the promoter and a 4-bp deletion in the untranslated exon 1. Subsequently, an association case-control study including 112 English patients and 80 Danish patients with bipolar affective disorder (BPAD) revealed a significant association with the 1-bp deletion. This finding prompted us to analyze whether this effect was also present in a larger and ethnically homogeneous sample of 228 unrelated German patients with BPAD (208 patients with BP I disorder, 20 patients with BP II disorder), 183 unrelated patients with unipolar affective disorder (UPAD), and 234 healthy control subjects. For both BPAD and UPAD we could not detect a genetic association with either variant. Thus, our results do not support an involvement of the 1-bp or 4-bp deletion within the DDC gene in the etiology of affective disorders.

Adult↗

Identification and structure of a putative Ca2+-binding domain at the C terminus of AQP1.

Aquaporin-1 (AQP1) is the first functionally identified aquaporin of a growing family of membrane water channels found in all forms of life. Recently, a possible secondary function as a cyclic guanosine monophosphate (cGMP) gated ion channel was attributed to AQP1. We have reconstituted purified protein from bovine and human red blood cell membranes into highly ordered 2D crystals. The topography of both AQP1s was determined by electron microscopy from freeze-dried, unidirectionally metal-shadowed 2D crystals as well as from surface topographs of native crystals recorded in buffer solution with the atomic force microscope (AFM). In spite of the high level of sequence homology between bovine and human AQP1, the surfaces showed distinct differences. Alignment of both sequences and comparison of the acquired surface topographies with the atomic model of human AQP1 revealed the topographic changes on the surface of bovine AQP1 to be induced by a few amino acid substitutions. A striking degree of sequence homology was found between the carboxyl-terminal domains of AQP1s from different organisms and EF-hands from Ca2+-binding proteins belonging to the calmodulin superfamily, suggesting the existence of a Ca2+-binding site at the C terminus of AQP1 instead of the putative cGMP-binding site reported previously. To unveil its position on the acquired surface topographies, 2D crystals of AQP1 were digested with carboxypeptidase Y, which cleaves off the intracellular C terminus. Difference maps of AFM topographs between the native and the peptidase-treated AQP1s showed the carboxylic tail to be close to the 4-fold symmetry axis of the tetramer. SDS-PAGE and matrix-assisted laser desorption/ionisation mass spectrometry of native and decarboxylated bovine and human AQP1 revealed that the EF-hand motif found at the C terminus of AQP1 was partially resistant to peptidase digestion. The importance of the C-terminal domain is implicated by structural instability of decarboxylated AQP1. A possible role of the C terminus and calcium in translocation of AQP1 in cholangiocytes from intracellular vesicles to the plasma membrane and in triggering its fusion is discussed. Functional studies are now required to identify the physiological role of the Ca2+-binding site.

Amino Acid Sequence↗

Sampling the conformational space of membrane protein surfaces with the AFM.

The atomic force microscope acquires topographs of single native membrane proteins at subnanometer resolution. Owing to the high signal-to-noise ratio, such images allow the conformational space of membrane protein surfaces to be sampled. This is demonstrated by topographs of porin OmpF, aquaporin-Z, and bacteriorhodopsin, all recorded at a lateral resolution of <7 A and a vertical resolution of ~1 A. The amplitudes of the domain movements were estimated from a large number of single molecule topographs and the corresponding energy landscapes calculated. To visualize the motion of protein domains, movies were generated by similarity ranking of the observed protein configurations. Electronic supplementary material to this paper can be obtained by using the Springer Link server located at http://dx.doi.org/10.1007/s00249-001-0197-8

Aquaporins↗

Isolation and characterization of gap junctions from tissue culture cells.

The purification of membrane proteins in a form and amount suitable for structural or biochemical studies still remains a great challenge. Gap junctions have long been studied using electron microscopy and X-ray diffraction. However, only a limited number of proteins in the connexin family have been amenable to protein or membrane purification techniques. Molecular biology techniques for expressing large gap junctions in tissue culture cells combined with improvements in electron crystallography have shown great promise for determining the channel structure to better than 10 A resolution. Here, we have isolated two-dimensional (2D) gap junction crystals from HeLa Cx26 transfectants. This isoform has never been isolated in large fractions from tissues. We characterize these preparations by SDS-PAGE, Western blotting, negative stain electron microscopy and atomic force microscopy. In our preparations, the Cx26 is easily detected in the Western blots and we have increased expression levels so that connexin bands are visible on SDS-PAGE gels. Preliminary assessment of the samples by electron cryo-microscopy shows that these 2D crystals diffract to at least 22 A. Atomic force microscopy of these Cx26 gap junctions show exquisite surface modulation at the extracellular surface in force dissected gap junctions. We also applied our protocol to cell lines such as NRK cells that express endogenous Cx43 and NRK and HeLa cell lines transfected with exogenous connexins. While the gap junction membrane channels are recognizable in negatively stained electron micrographs, these lattices are disordered and the gap junction plaques are smaller. SDS-PAGE and Western blotting revealed expression of connexins, but at a lower level than with our HeLa Cx26 transfectants. Therefore, the purity and morphology of the gap junction plaques depends the size and abundance of the gap junctions in the cell line itself.

Animals↗

Association between a polymorphism in the pseudoautosomal X-linked gene SYBL1 and bipolar affective disorder.

In the past decade, several chromosomal regions have been analyzed for linkage with bipolar affective disorder (BPAD). There have been conflicting results regarding the involvement of X-chromosomal regions in harboring susceptibility genes for BPAD. Recently, a new candidate gene (SYBL1) for BPAD has been described on Xq28. SYBL1, which maps to the Xq pseudoautosomal region (PAR), encodes a member of the synaptobrevin family of proteins involved in synaptic vesicle docking, exocytosis, and membrane transport. A subsequent case-control association study, including 110 US-American patients with BPAD and 119 unrelated controls, investigated a potential etiological role of a novel polymorphism (G-->C transversion) in a regulatory region of the SYBL1 gene. In this analysis, the C allele showed a statistical trend to be more frequent in males with BPAD than in respective controls (P=0.06). This finding prompted us to verify whether a similar effect was also present in a larger German sample of 164 unrelated patients with BPAD (148 patients with BP I disorder, 16 patients with BP II disorder) and 267 controls. We observed a significantly increased frequency of genotypes homozygous for the C allele in females with BPAD in comparison with controls (P=0.017). Thus, our data strengthen the role of the SYBL1 gene as a candidate gene for BPAD.

Adult↗

Stability of bacteriorhodopsin alpha-helices and loops analyzed by single-molecule force spectroscopy.

The combination of high-resolution atomic force microscopy imaging and single-molecule force spectroscopy allows the identification, selection, and mechanical investigation of individual proteins. In a recent paper we had used this technique to unfold and extract single bacteriorhodopsins (BRs) from native purple membrane patches. We show that subsets of the unfolding spectra can be classified and grouped to reveal detailed insight into the individualism of the unfolding pathways. We have further developed this technique and analysis to report here on the influence of pH effects and local mutations on the stability of individual structural elements of BR against mechanical unfolding. We found that, although the seven transmembrane alpha-helices predominantly unfold in pairs, each of the helices may also unfold individually and in some cases even only partially. Additionally, intermittent states in the unfolding process were found, which are associated with the stretching of the extracellular loops connecting the alpha-helices. This suggests that polypeptide loops potentially act as a barrier to unfolding and contribute significantly to the structural stability of BR. Chemical removal of the Schiff base, the covalent linkage of the photoactive retinal to the helix G, resulted in a predominantly two-step unfolding of this helix. It is concluded that the covalent linkage of the retinal to helix G stabilizes the structure of BR. Trapping mutant D96N in the M state of the proton pumping photocycle did not affect the unfolding barriers of BR.

Bacteriorhodopsins↗

Imaging the electrostatic potential of transmembrane channels: atomic probe microscopy of OmpF porin.

The atomic force microscope (AFM) was used to image native OmpF porin and to detect the electrostatic potential generated by the protein. To this end the OmpF porin trimers from Escherichia coli was reproducibly imaged at a lateral resolution of approximately 0.5 nm and a vertical resolution of approximately 0.1 nm at variable electrolyte concentrations of the buffer solution. At low electrolyte concentrations the charged AFM probe not only contoured structural details of the membrane protein surface but also interacted with local electrostatic potentials. Differences measured between topographs recorded at variable ionic strength allowed mapping of the electrostatic potential of OmpF porin. The potential map acquired by AFM showed qualitative agreement with continuum electrostatic calculations based on the atomic OmpF porin embedded in a lipid bilayer at the same electrolyte concentrations. Numerical simulations of the experimental conditions showed the measurements to be reproduced quantitatively when the AFM probe was included in the calculations. This method opens a novel avenue to determine the electrostatic potential of native protein surfaces at a lateral resolution better than 1 nm and a vertical resolution of approximately 0.1 nm.

Biophysical Phenomena↗

Imaging and manipulation of biological structures with the AFM.

Many biologists have dreamt of physically touching and manipulating the biomolecules they were investigating. With the invention of the atomic force microscope (AFM), this dream has come true. Here, recent applications of the AFM to image and to manipulate biological systems at the nanometer scale are reviewed. Macromolecular biological assemblies as well as individual biomolecules can be subjected to controlled nanomanipulation. Examples of AFM application in imaging and nanomanipulation include the extraction of chromosomal DNA for genetic analysis, the disruption of antibody--antigen bonds, the dissection of biological membranes, the nanodissection of protein complexes, and the controlled modulation of protein conformations. Also reviewed is the novel combination of single molecule imaging and force spectroscopy which allows biomolecules to be imaged, and inter- and intramolecular forces to be measured. Future application of these nanotechniques will reveal new information on the structure, function and assembly of biomolecules.

Antigen-Antibody Complex↗

Observing structure, function and assembly of single proteins by AFM.

Single molecule experiments provide insight into the individuality of biological macromolecules, their unique function, reaction pathways, trajectories and molecular interactions. The exceptional signal-to-noise ratio of the atomic force microscope allows individual proteins to be imaged under physiologically relevant conditions at a lateral resolution of 0.5-1nm and a vertical resolution of 0.1-0.2nm. Recently, it has become possible to observe single molecule events using this technique. This capability is reviewed on various water-soluble and membrane proteins. Examples of the observation of function, variability, and assembly of single proteins are discussed. Statistical analysis is important to extend conclusions derived from single molecule experiments to protein species. Such approaches allow the classification of protein conformations and movements. Recent developments of probe microscopy techniques allow simultaneous measurement of multiple signals on individual macromolecules, and greatly extend the range of experiments possible for probing biological systems at the molecular level. Biologists exploring molecular mechanisms will benefit from a burgeoning of scanning probe microscopes and of their future combination with molecular biological experiments.

Biophysical Phenomena↗