PubMed Health⌕ Search

Biomedical subjects

Daniel W Armstrong

Publications and source records attributed to Daniel W Armstrong.

At least 19 recordsLinked to original sources
PubMed2007

Enantioseparation of extended metal atom chain complexes: unique compounds of extraordinarily high specific rotation.

Extended metal atom chains (EMACs) contain a linear metal chain wrapped by various ligands. Most complexes are of the form M(3)(dpa)(4)X(2), where M = metal, dpa = 2,2'-dipyridylamide, and X = various anions. The ligands form helical coils about the metal chain, which results in chiral EMAC complexes. The EMACs containing the metals Co and Cu were partially separated in polar organic mode using a vancomycin-based chiral stationary phase. Under similar conditions, two EMACs with Ni metal and varying anions could be baseline separated. The polar organic mode was used because of the instability of the compounds in aqueous mobile phases. Also, these conditions are more conducive to preparative separations. Polarimetric measurements on the resolved enantiomers of Ni(3)(dpa)(4)Cl(2) indicate that they have extraordinarily high specific rotations (on the order of 5000 deg cc/g dm).

Anti-Bacterial Agents↗
PubMed2006

Rapid determination of complex mixtures by dual-column gas chromatography with a novel stationary phase combination and spectrometric detection.

Fast GC separations of a broad range of analytes are demonstrated using a capillary column coated with a novel immobilized ionic liquid (IIL) stationary phase. Both completely cross-linked and partially cross-linked columns were evaluated, yielding approximately 1600 and approximately 2000 theoretical plates per meter, respectively. Enhanced separation is demonstrated using a dual-column ensemble comprised of an IIL column, a commercially coated Rtx-1 column, and a pneumatic valve connecting the inlet to the junction point between the two columns. Enhanced separation of 20 components, with two sets of co-eluting peaks is shown in approximately 150 s, while sacrificing only a length of time equivalent to the sum of the stop flow pulses, or about 15.5 s. A novel application of a band trajectory model that shows band position as a function of analysis time as analytes move through the column ensemble is employed to determine pulse application times. The model predicts component retention times within a few seconds. Another method of selectivity enhancement of the IIL stationary phase-coated columns is demonstrated using a differential mobility spectrometer (DMS) that provides a second dimension separation based on ion mobility in a high-frequency electrical field. The DMS is able to separate all but one set of co-eluting components from the IIL column. The separation of 13 components found in the headspace above U.S. currency is demonstrated using the IIL column in a dual-column ensemble as well as with the DMS.

Chromatography, Gas↗
PubMed2006

Assessing the roles of the constituents of ionic liquids in dynamic solvation: Comparison of an ionic liquid in micellar and bulk form.

Dynamic solvation of the dye, coumarin 153, is compared in an ionic liquid that forms micelles in water against the bulk solvent. This provides the unprecedented opportunity of investigating the behavior of the ionic liquid in two globally different configurations. It is proposed that the imidazolium moiety is in both cases responsible for the majority of the solvation, which manifests itself in the first 100 ps. Exploiting the use of ionic liquids capable of accommodating specific structures thus provides a deeper insight into how solutes interact with these fascinating and interesting solvents (at least those that are imidazolium based) that are gaining ever increasing interest in the scientific community.

Coumarins↗
PubMed2006

Dynamic solvation in imidazolium-based ionic liquids on short time scales.

Steady-state and time-resolved Stokes shift data for the probe coumarin 153 in two imidazoles, six imidazolium-based ionic liquids, and several other solvents are presented. These results are consistent with our original suggestion (J. Phys. Chem. B 2004, 108, 10245-10255) that initial solvation is dominated by the organic moiety of the ionic liquid, and they show that for the imidazole-based liquids initial solvation is in all cases very rapid. Solvation by methylimidazole and butylimidazole is complete in 100 ps, and all of the imidazolium ionic liquids demonstrate similarly rapid initial solvation. Owing to the importance of determining the amount of initial solvation that is missed in a given experiment with finite time resolution, we discuss a method of estimating the intramolecular contribution to the reorganization energy. This method yields 2068 cm(-1) and is compared with an alternative method.

Journal Article↗
PubMed2006

Capillary electrophoretic method for the detection of bacterial contamination.

There has been growing interest in separations-based techniques for the identification and characterization of microorganisms because of the versatility, selectivity, sensitivity, and short analysis times of these methods. A related area of analysis that is scientifically and commercially important is the determination of the presence or complete absence of microbes (in essence, a test for sample sterility). In such a test, it is not of immediate importance to identify a particular microorganism, but rather, to know with a high degree of certainty whether any organism(s) is (are) present. Current regulations require culture-based tests that can take up to 2 weeks to complete. As a rapid alternative, capillary electrophoresis-based methods are examined. Experimental formats are developed that promote the consolidation of all cell types into a single zone (peak) which is separated from the electroosmotic flow front and any other interfering molecular constituents. This process can be accomplished using a segment of dilute cetyltrimethylammonium bromide, which serves to temporarily reverse the migration direction of the cells, and another segment of solution containing a "blocking agent", which serves to stop the cell migration and focus them into a narrow zone. Relatively wide-bore capillaries can be used to increase sample size. This approach appears to be effective for a broad spectrum of bacteria, and analyses times are less than 10 min.

Bacillus cereus↗
PubMed2006

High resolution spectral differentiation of enantiomers: benzo[a]pyrene tetrols complexed with a promiscuous antibody.

The interaction of the highly cross-reactive anti-PAH monoclonal antibody with four diastereomeric benzo[a]pyrene tetrols (BPTs) is studied by means of fluorescence line-narrowing spectroscopy. It is shown that the interaction of enantiomers of cis-BPT and trans-BPT with the antibody involves different complex geometries. These spatially different ligand-protein interactions alter the relative intensities of the excited-state vibrational frequencies of immunocomplexed molecules allowing for unambiguous spectroscopic resolution of all four enantiomeric isomers. This study represents the first example of a high-resolution, fluorescence-based spectroscopic method capable of enantiospecific differentiation.

Antibodies, Monoclonal↗
PubMed2006

Development of dinitrophenylated cyclodextrin derivatives for enhanced enantiomeric separations by high-performance liquid chromatography.

The synthesis and evaluation of new dinitrophenyl (DNP) substituted beta-cyclodextrin (beta-CD) chiral stationary phases (CSPs) for the enantioseparation of various classes of chiral analytes by HPLC are presented. The dinitrophenyl substituted beta-CD derivatives are synthesized and covalently bonded to functionalized 5 microm spherical porous silica gel. These are the first reported derivatized cyclodextrin which contains pi-electron deficient substituents (i.e., pi-acidic moieties). The column performance in terms of their ability to separate enantiomers is evaluated. A variety of different dinitro-substituted aryl groups are investigated and compared. The pH of the mobile phase buffers, the buffer composition, the number and position of the dinitro groups on the phenyl ring substituent, the degree of substitution, and the bonding strategy all greatly affect the performance of the CSPs. A large variety of racemic compounds have been separated successfully on these CSPs. The bonded dinitrophenyl-derivatized cyclodextrins are stable in all three mobile phase modes, namely, the reversed-phase, polar organic, and normal phase modes. No degradation in column performance was observed in any mode of operation even after more than 1000 injections. The analytical applicability of these types of CSPs for enantiomeric separations is discussed in detail.

Alcohols↗
PubMed2006

Maristentorin, a novel pigment from the positively phototactic marine ciliate Maristentor dinoferus, is structurally related to hypericin and stentorin.

The photoreceptor pigment of the heterotrich ciliate, Maristentor dinoferus, has been characterized. It is structurally similar to those of Stentor coeruleus and Blepharisma japonicum but differs significantly in that it bears no aromatic hydrogens. The structure of the pigment, maristentorin, is based upon the hypericin skeleton, and its spectra are nearly identical to those of hypericin but shifted toward the red. Within experimental error, its fluorescence lifetime is identical to that of hypericin, approximately 5.5 ns in dimethylsulfoxide. It is remarkable that while the pigments are structurally similar in S. coeruleus and M. dinoferus, in the former there is an abrupt photophobic response, whereas in the latter there is a slow response toward light. The roles of the hypericin-like pigments in the heterotrich ciliates are discussed as potentially analogous in Maristentor.

Animals↗
PubMed2006

Determination of solute partition behavior with room-temperature ionic liquid based micellar gas-liquid chromatography stationary phases using the pseudophase model.

The use of micelles in ionic liquid based gas-chromatography stationary phases was evaluated using equations derived for a "three-phase" model. This model allows the determination of all three partition coefficients involved in the system, and elucidates the micellar contribution to retention and selectivity. Four types of micellar-ionic liquid columns were examined in this study: 1-butyl-3-methylimidazolium chloride with sodium dodecylsulfate or dioctyl sulfosuccinate, and 1-butyl-3-methylimidazolium hexafluorophosphate with polyoxyethylene-100-stearyl ether or polyoxyethylene-23-lauryl ether. The partition coefficients were measured for a wide range of probe molecules capable of a variety of types and magnitudes of interactions. In general, most probe molecules preferentially partitioned to the micellar pseudophase over the bulk ionic liquid component of the stationary phase. Therefore, addition of surfactant to the stationary phase usually resulted in greater solute retention. It is also shown that the selectivity of the stationary phase is significantly altered by the presence of micelles, either by enhancing or lessening the separation. The effects of surfactant on the interaction parameters of the stationary phase are determined using the Abraham solvation parameter model. The addition of sodium dodecylsulfate and dioctyl sulfosuccinate to 1-butyl-3-methylimidazolium chloride stationary phases generally increased the phase's hydrogen bond basicity and increased the level of dispersion interaction. Polyoxyethylene-100-stearyl ether and polyoxyethylene-23-lauryl ether surfactants, however, enhanced the pi-pi/n-pi, polarizability/dipolarity, and hydrogen bond basicity interactions of 1-butyl-3-methylimidazolium hexafluorophosphate to a greater degree than the ionic surfactants with 1-butyl-3-methylimidazolium chloride. However, these nonionic surfactants appeared to hinder the ability of the stationary phase to interact with solutes via dispersion forces. Therefore, it is possible to effectively predict which analytes will be most highly retained by these micellar-ionic liquid stationary phases.

Chromatography, Gas↗
PubMed2006

Theory and use of the pseudophase model in gas-liquid chromatographic enantiomeric separations.

The theory and use of the "three-phase" model in enantioselective gas-liquid chromatography utilizing a methylated cyclodextrin/polysiloxane stationary phase is presented for the first time. Equations are derived that account for all three partition equilibria in the system, including partitioning between the gas mobile phase and both stationary-phase components and the analyte equilibrium between the polysiloxane and cyclodextrin pseudophase. The separation of the retention contributions from the achiral and chiral parts of the stationary phase can be easily accomplished. Also, it allows the direct examination of the two contributions to enantioselctivity, i.e., that which occurs completely in the liquid stationary phase versus the direct transfer of the chiral analyte in the gas phase to the dissolved chiral selector. Six compounds were studied to verify the model: 1-phenylethanol, alpha-ionone, 3-methyl-1-indanone, o-(chloromethyl)phenyl sulfoxide, o-(bromomethyl)phenyl sulfoxide, and ethyl p-tolylsulfonate. Generally, the cyclodextrin component of the stationary phase contributes to retention more than the bulk liquid polysiloxane. This may be an important requirement for effective GC chiral stationary phases. In addition, the roles of enthalpy and entropy toward enantiorecognition by this stationary phase were examined. While enantiomeric differences in both enthalpy and entropy provide chiral discrimination, the contribution of entropy appears to be more significant in this regard. The three-phase model may be applied to any gas-liquid chromatography stationary phase involving a pseudophase.

Arylsulfonates↗
PubMed2006

High-performance liquid chromatographic enantioseparation of unusual secondary amino acids on a D-penicillamine-based chiral ligand exchange column.

The application of a chiral ligand-exchange column (CLEC) for the direct high-performance liquid chromatographic enantioseparation of unusual secondary amino acids using D-penicillamine-Cu(II) complex as chiral selector is reported. The amino acids investigated were pyrrolidine-2-carboxylic acid, piperidine-2-carboxylic acid, piperazine-2-carboxylic acid, morpholine-3-carboxylic acid, and thiomorpholine-3-carboxylic acid analogs. Chromatographic results are given as the retention, separation, and resolution factors. The chromatographic conditions were varied to achieve optimal separation. The elution sequence of the enantiomers was determined and in most cases the S isomer eluted before R.

Chromatography, High Pressure Liquid↗
PubMed2006

Flow-through partial-filling affinity capillary electrophoresis using a crossreactive antibody for enantiomeric separations.

It is demonstrated that the separation of diastereoisomers and enantiomers can be accomplished by the flow-through partial-filling affinity CE using a crossreactive mAb. This approach revealed differences in the binding strength of the (+/-)-cis- and (+/-)-trans-benzo[a]pyrene tetrols with the anti-polycyclic aromatic hydrocarbon mAb and demonstrated that (+)-enantiomers are more strongly immunocomplexed than their (-)-counterparts. It is proposed that crossreactive monoclonal antibodies (i.e. mAb raised against achiral molecule and possessing limited selectivity) could be effectively utilized for specific stereoisomeric differentiation and chiral separations.

Affinity Labels↗
PubMed2006

Evaluation and comparison of a methylated teicoplanin aglycone to teicoplanin aglycone and natural teicoplanin chiral stationary phases.

HPLC enantiomeric separations of a wide variety of racemic analytes was evaluated using chiral stationary phases (CSPs) based on the macrocyclic glycopeptides teicoplanin (T), teicoplanin aglycone (TAG), and methylated teicoplanin aglycone (Me-TAG) in two different mobile phase modes, i.e., the RP mode and the polar organic (PO) mode. Comparison of the enantiomeric separations using Chirobiotic T, Chirobiotic TAG, and the methylated form of TAG were conducted in order to gain a better understanding of the roles of the polar functional groups on the CSP. Substantial effects due to the cleavage of saccharides and/or methylation on chiral separations were observed in both separation modes. Improved separation efficiencies for many acidic analytes were obtained by methylating the H-bonding groups of TAG. These groups were believed to be a contributing factor to band broadening on TAG due to their negative effect on mass transfer between the stationary phase and mobile phase. Ionic/dipolar interactions between the carboxylate group of the analytes and the amine groups on T, TAG, or Me-TAG are important for chiral discrimination. Therefore, analytes possessing a carboxyl group are good candidates for successful separations on these CSPs. Hydrophobic interactions are important for enantiomeric separations in the RP mode where the H-bonding interactions between analytes and the chiral selectors are relatively weak. Me-TAG offers higher hydrophobicity, which can accentuate the interactions of analytes with hydrophobic moieties, but these interactions are not necessarily stereoselective. In the PO mobile phase, electrostatic/dipolar interactions between polar functional groups are the dominating interactions in chiral recognition. Another important factor is steric fit, which could be changed with every modification of the T structure. Therefore, substantial changes of enantioseparations were obtained within this studied group of CSPs. The PO mode was shown to be the most powerful mobile phase mode for enantiomeric separations on T-based stationary phases, mainly due to the improved efficiency. Methylation of the TAG proved to be a very useful tool for investigating the chiral recognition mechanism for this group of chiral selectors.

Chromatography, High Pressure Liquid↗
PubMed2006

Gas chromatographic determination of the interconversion energy barrier for dimethyl-2,3-pentadienedioate enantiomers.

The enantiomers of dimethyl-2,3-pentadienedioate undergo interconversion during gas chromatographic separation on 2,6-di-O-methyl-3-O-pentyl-beta-, 2,6-di-O-methyl-3-O-pentyl-gamma-, and 2,3-di-O-methyl-6-O-tert butyldimethylsilyl-beta-CD chiral stationary phases. The combination of a deconvolution method with an internal standard was used to determine individual enantiomer peak areas and retention times needed for the calculation of the interconversion rate constants and the energy barrier for dimethyl-2,3-pentadienedioate enantiomers. The kinetic and thermodynamic data obtained for the interconversion data (rate constants, energy barriers, enthalpies, and entropies) were in good agreement with the published data (Trapp, O., Schurig, V., Chirality 2002, 14, 465-470) using permethylated-beta-CD (Chirasil-beta-Dex).

Alkadienes↗
PubMed2006

Determination of the 2,3-pentadienedioic acid enantiomer interconversion energy barrier 1. Classical kinetic approach.

A classical kinetic method was used to determine the energy barrier for the inter-conversion of 2,3-pentadienedioic acid enantiomers. Each individual enantiomer was isolated by collecting the appropriate peaks from the HPLC enantiomeric separation, of racemic 2,3-pentadienedioic acid. The isolated enantiomers were racemized at 22 degrees C using various interconversion times. The ratio of enantiomers in each reaction solution was determined by HPLC at 22 degrees C. The corresponding peak areas of the enantiomers and the interconversion times obtained from the HPLC chromatograms were used to calculate both the interconversion rate constants describing (+)--> (-) and (-) --> (+) interconversions as well as the energy barriers. It was confirmed that the interconversion of 2,3-pentadienedioic acid enantiomers is a firstorder kinetic reaction. Both semiempirical and ab initio methods were used to explore the mechanism of the interconversion of 2,3-pentadienedioic acid enantiomers, and to calculate the interconversion energy barrier. Comparison of the interconversion energy barriers found by the ab initio method (deltaG# = 110.7 kJ/mol) and by classical kinetics in the mobile phase solution at 22 degrees C (delta Gapp = 93.9+/-0.2 kJ/mol) shows a difference which may be attributed to the different conditions assumed in the theoretical calculation (i.e., a gaseous state) and the actual experimental conditions (i. e., liquid solution) and a possible catalytic effect of the solution composition.

Alkadienes↗
PubMed2005

Use of the three-phase model and headspace analysis for the facile determination of all partition/association constants for highly volatile solute-cyclodextrin-water systems.

A versatile method for measuring the partition coefficients of volatile analytes with an aqueous pseudophase using headspace gas chromatography is reported. A "three-phase" model accounts for all equilibria present in the system, including the partitioning of the analyte in the gas and aqueous phases to the pseudophase. This method is applicable to a wide variety of volatile analytes and aqueous pseudophases, providing that sufficient pseudophase may be used to reduce the analyte partial pressure. Generally, the method offers good reproducibility and high sensitivity. The associations of five volatile analytes (hydrogen sulfide, methanethiol, dimethyl sulfide, dichloromethane, and ethyl ether) with various cyclodextrins were examined. All analytes were found to partition preferentially to the cyclodextrin pseudophase compared to the aqueous phase. In addition, several analyte-cyclodextrin combinations formed insoluble complexes in solution that enhanced the extraction of the analyte from the gas and aqueous phases. Derivatization of the cyclodextrins generally decreased the extent of analyte-cyclodextrin interaction.

Cyclodextrins↗