PubMed Health⌕ Search

Biomedical subjects

David A Case

Publications and source records attributed to David A Case.

At least 19 recordsLinked to original sources

Second derivatives in generalized Born theory.

Generalized Born solvation models offer a popular method of including electrostatic aspects of solvation free energies within an analytical model that depends only upon atomic coordinates, charges, and dielectric radii. Here, we describe how second derivatives with respect to Cartesian coordinates can be computed in an efficient manner that can be distributed over multiple processors. This approach makes possible a variety of new methods of analysis for these implicit solvation models. We illustrate three of these methods here: the use of Newton-Raphson optimization to obtain precise minima in solution; normal mode analysis to compute solvation effects on the mechanical properties of DNA; and the calculation of configurational entropies in the MM/GBSA model. An implementation of these ideas, using the Amber generalized Born model, is available in the nucleic acid builder (NAB) code, and we present examples for proteins with up to 45,000 atoms. The code has been implemented for parallel computers using both the OpenMP and MPI environments, and good parallel scaling is seen with as many as 144 OpenMP processing threads or MPI processing tasks.

Algorithms↗

An accurate and simple quantum model for liquid water.

The path-integral molecular dynamics and centroid molecular dynamics methods have been applied to investigate the behavior of liquid water at ambient conditions starting from a recently developed simple point charge/flexible (SPC/Fw) model. Several quantum structural, thermodynamic, and dynamical properties have been computed and compared to the corresponding classical values, as well as to the available experimental data. The path-integral molecular dynamics simulations show that the inclusion of quantum effects results in a less structured liquid with a reduced amount of hydrogen bonding in comparison to its classical analog. The nuclear quantization also leads to a smaller dielectric constant and a larger diffusion coefficient relative to the corresponding classical values. Collective and single molecule time correlation functions show a faster decay than their classical counterparts. Good agreement with the experimental measurements in the low-frequency region is obtained for the quantum infrared spectrum, which also shows a higher intensity and a redshift relative to its classical analog. A modification of the original parametrization of the SPC/Fw model is suggested and tested in order to construct an accurate quantum model, called q-SPC/Fw, for liquid water. The quantum results for several thermodynamic and dynamical properties computed with the new model are shown to be in a significantly better agreement with the experimental data. Finally, a force-matching approach was applied to the q-SPC/Fw model to derive an effective quantum force field for liquid water in which the effects due to the nuclear quantization are explicitly distinguished from those due to the underlying molecular interactions. Thermodynamic and dynamical properties computed using standard classical simulations with this effective quantum potential are found in excellent agreement with those obtained from significantly more computationally demanding full centroid molecular dynamics simulations. The present results suggest that the inclusion of nuclear quantum effects into an empirical model for water enhances the ability of such model to faithfully represent experimental data, presumably through an increased ability of the model itself to capture realistic physical effects.

Computer Simulation↗

How nitrogenase shakes--initial information about P-cluster and FeMo-cofactor normal modes from nuclear resonance vibrational spectroscopy (NRVS).

Nitrogenase catalyzes a reaction critical for life, the reduction of N(2) to 2NH(3), yet we still know relatively little about its catalytic mechanism. We have used the synchrotron technique of (57)Fe nuclear resonance vibrational spectroscopy (NRVS) to study the dynamics of the Fe-S clusters in this enzyme. The catalytic site FeMo-cofactor exhibits a strong signal near 190 cm(-)(1), where conventional Fe-S clusters have weak NRVS. This intensity is ascribed to cluster breathing modes whose frequency is raised by an interstitial atom. A variety of Fe-S stretching modes are also observed between 250 and 400 cm(-)(1). This work is the first spectroscopic information about the vibrational modes of the intact nitrogenase FeMo-cofactor and P-cluster.

Algorithms↗

Influence of budget and reinforcement location on risk-sensitive preference.

Little is known about the effect that procedural variables have on risk-sensitive preference. This study assessed the effect of procedural variables on pigeons' choice between a fixed and variable amount of reinforcement (amount risk) and, in a separate condition, between a fixed and variable delay until reinforcement (delay risk). Experiment 1 investigated the impact of water reinforcement and risk dimension when pigeons were in a restrictive budget, where access to water was less than that necessary to maintain current body weight, and a condition where the pigeons had ample access to water. Pigeons exhibited a greater tendency to prefer the variable alternative for delay risk than for amount risk in both restrictive and ample budgets. Varying water budget had no effect on risk preference. Experiment 2 investigated the influence of water reinforcer location while in a restrictive budget, in which reinforcers were delivered to a single location, two distinct locations, or a randomly selected location. With amount risk, pigeons were risk averse when reinforcers were delivered in separate or random locations and were indifferent to risk when delivered to a single location. With delay risk, pigeons were generally risk prone with no effect from reinforcement location. The finding that pigeons were risk averse when reinforcers were delivered to separate locations and were indifferent to risk when delivered to a single location offers a methodological explanation to the inconsistent findings in the literature with amount risk.

Animals↗

A multistep approach to structure-based drug design: studying ligand binding at the human neutrophil elastase.

In this study we show that a combination of different theoretical methods is a viable approach to calculate the binding affinities of new ligands for the human neutrophile elastase. This protease degrades elastin and likely aids neutrophils in fulfilling their immunological functions. Abnormally high human neutrophil elastase (HNE) levels are involved in several diseases; therefore, inhibitors of HNE are of interest as targets for drug design. A recent study has revealed that cinnamic acid and bornyl ester derivatives bind to HNE, but DeltaG0 values from ligand docking results exhibited no correlation with those calculated from the IC50 values. To accurately compute binding affinities, we generated possible protein ligand complex structures by ligand docking calculations. For each of the ligands, the 30 most likely placements were used as starting points of nanosecond length molecular dynamics simulations. The binding free energies for these complex structures were estimated using a continuum solvent (MM-PBSA) approach. These results, along with structural data from the molecular dynamics runs, allowed the identification of a group of similar placements that serve as a model for the natural protein ligand complex structure. This structural model was used to perform thermodynamic integration (TI) calculations to obtain the relative binding free energies of similar ligands to HNE. The TI results were in quantitative agreement with the measured binding affinities. Thus, the presented approach can be used to generate a probable complex structure for known ligands to HNE and to use such a structure to calculate the effects of small ligand modifications on ligand binding, possibly leading to new inhibitors with improved binding affinities.

Binding Sites↗

Dynamics of an [Fe4S4(SPh)4]2- cluster explored via IR, Raman, and nuclear resonance vibrational spectroscopy (NRVS)-analysis using 36S substitution, DFT calculations, and empirical force fields.

We have used four vibrational spectroscopies--FT-IR, FT-Raman, resonance Raman, and 57Fe nuclear resonance vibrational spectroscopy (NRVS)--to study the normal modes of the Fe-S cluster in [(n-Bu)4N]2[Fe4S4(SPh)4]. This [Fe4S4(SR)4]2- complex serves as a model for the clusters in 4Fe ferredoxins and high-potential iron proteins (HiPIPs). The IR spectra exhibited differences above and below the 243 K phase transition. Significant shifts with 36S substitution into the bridging S positions were also observed. The NRVS results were in good agreement with the low temperature data from the conventional spectroscopies. The NRVS spectra were interpreted by normal mode analysis using optimized Urey-Bradley force fields (UBFF) as well as from DFT theory. For the UBFF calculations, the parameters were refined by comparing calculated and observed NRVS frequencies and intensities. The frequency shifts after 36S substitution were used as an additional constraint. A D 2d symmetry Fe4S4S'4 model could explain most of the observed frequencies, but a better match to the observed intensities was obtained when the ligand aromatic rings were included for a D 2d Fe4S4(SPh)4 model. The best results were obtained using the low temperature structure without symmetry constraints. In addition to stretching and bending vibrations, low frequency modes between approximately 50 and 100 cm(-1) were observed. These modes, which have not been seen before, are interpreted as twisting motions with opposing sides of the cube rotating in opposite directions. In contrast with a recent paper on a related Fe4S4 cluster, we find no need to assign a large fraction of the low frequency NRVS intensity to 'rotational lattice modes'. We also reassign the 430 cm(-1) band as primarily an elongation of the thiophenolate ring, with approximately 10% terminal Fe-S stretch character. This study illustrates the benefits of combining NRVS with conventional Raman and IR analysis for characterization of Fe-S centers. DFT theory is shown to provide remarkable agreement with the experimental NRVS data. These results provide a reference point for the analysis of more complex Fe-S clusters in proteins.

Algorithms↗

Nudged elastic band calculation of minimal energy paths for the conformational change of a GG non-canonical pair.

The nudged elastic band (NEB) technique has been implemented in AMBER to calculate low-energy paths for conformational changes. A novel simulated annealing protocol that does not require an initial hypothesis for the path is used to sample low-energy paths. This was used to study the conformational change of an RNA cis Watson-Crick/Hoogsteen GG non-canonical pair, with one G syn around the glycosidic bond and the other anti. A previous solution structure, determined by NMR-constrained modeling, demonstrated that the GG pairs change from (syn)G-(anti)G to (anti)G-(syn)G in the context of duplex r(GCAGGCGUGC) on the millisecond timescale. The set of low-energy paths found by NEB show that each G flips independently around the glycosidic bond, with the anti G flipping to syn first. Guanine bases flip without opening adjacent base-pairs by protruding into the major groove, accommodated by a transient change by the ribose to C2'-exo sugar pucker. Hydrogen bonds between bases and the backbone, which lower the energetic barrier to flipping, are observed along the path. The results show the plasticity of RNA base-pairs in helices, which is important for biological processes, including mismatch repair, protein recognition, and translation. The modeling of the GG conformational change also demonstrates that NEB can be used to discover non-trivial paths for macromolecules and therefore NEB can be used as an exploratory method for predicting putative conformational change paths.

Base Pairing↗

Automatic atom type and bond type perception in molecular mechanical calculations.

In molecular mechanics (MM) studies, atom types and/or bond types of molecules are needed to determine prior to energy calculations. We present here an automatic algorithm of perceiving atom types that are defined in a description table, and an automatic algorithm of assigning bond types just based on atomic connectivity. The algorithms have been implemented in a new module of the AMBER packages. This auxiliary module, antechamber (roughly meaning "before AMBER"), can be applied to generate necessary inputs of leap-the AMBER program to generate topologies for minimization, molecular dynamics, etc., for most organic molecules. The algorithms behind the manipulations may be useful for other molecular mechanical packages as well as applications that need to designate atom types and bond types.

Algorithms↗

A comparison of quantum chemical models for calculating NMR shielding parameters in peptides: mixed basis set and ONIOM methods combined with a complete basis set extrapolation.

This article compares several quantum mechanical approaches to the computation of chemical shielding tensors in peptide fragments. First, we describe the effects of basis set quality up to the complete basis set (CBS) limit and level of theory (HF, MP2, and DFT) for four different atoms in trans N-methylacetamide. For both isotropic shielding and shielding anisotropy, the MP2 results in the CBS limit show the best agreement with experiment. The HF values show quite a different tendency to MP2, and even in the CBS limit they are far from experiment for not only the isotropic shielding of carbonyl carbon but also most shielding anisotropies. In most cases, the DFT values differ systematically from MP2, and small basis-set (double- or triple-zeta) results are often fortuitously in better agreement with the experiment than the CBS ones. Second, we compare the mixed basis set and ONIOM methods, combined with CBS extrapolation, for chemical shielding calculations at a DFT level using various model peptides. From the results, it is shown that the mixed basis set method provides better results than ONIOM, compared to CBS calculations using the nonpartitioned full systems. The information studied here will be useful in guiding the selection of proper quantum chemical models, which are in a tradeoff between accuracy and cost, for shielding studies of peptides and proteins.

Computer Simulation↗

Induced fit and "lock and key" recognition of 5S RNA by zinc fingers of transcription factor IIIA.

Transcription factor IIIA (TFIIIA) is a Cys2His2 zinc finger protein that regulates expression of the 5 S ribosomal RNA gene by binding specifically to the internal control element. TFIIIA also functions in transport and storage of 5 S RNA by binding directly to the RNA transcript. To obtain insights into the mechanism by which TFIIIA recognizes 5 S RNA, we determined the solution structure of the middle three zinc fingers bound to the central core of 5 S RNA. Finger 4 utilizes "lock and key" recognition to bind in the widened major groove of the pre-structured RNA loop E motif. This interaction is mediated by direct hydrogen bonding interactions with bases. In contrast, recognition of loop A, a flexible junction of three helices, occurs by an induced fit mechanism that involves reorganization of the conserved CAUA motif and structuring of the finger 5-finger 6 interface to form a complementary RNA binding surface.

Amino Acid Sequence↗

Differential solvation and tautomer stability of a model base pair within the minor and major grooves of DNA.

2-(2'-Hydroxyphenyl)benzoxazole (HBO) may be used as a model base pair to study solvation, duplex environment, and tautomerization within the major and minor groves of DNA duplexes. In its ground state, HBO possesses an enol moiety which may be oriented syn or anti relative to the imino nitrogen of the benzoxazole ring. In the absence of external hydrogen-bond donors and acceptors HBO exists as the internally hydrogen-bonded syn-enol, a mimic of the rare base pair tautomer found in DNA, which may be photoinduced to tautomerize and form the keto tautomer, a mimic of the dominant base pair tautomer. Previously, we demonstrated that when incorporated into DNA such that the enol moiety is positioned in the major groove, HBO is not solvated, exists exclusively as the internally hydrogen-bonded syn-enol which is efficiently photoinduced to tautomerize, and the corresponding keto tautomer is preferentially stabilized. In stark contrast, we now show that when HBO is incorporated in DNA such that the enol moiety is positioned in the minor groove, the enol tautomer is preferentially stabilized. Molecular dynamics simulations suggest that this results from the formation of a stable hydrogen-bond between the HBO enol and the O4' atom of an adjacent nucleotide, an H-bond acceptor that is only available in the minor groove. The differential stabilization of the enol and keto tautomers in the major and minor grooves may reflect the functions for which these environments evolved, including duplex replication, stability, and recognition.

Base Pairing↗

Molecular dynamics simulations of the 136 unique tetranucleotide sequences of DNA oligonucleotides. II: sequence context effects on the dynamical structures of the 10 unique dinucleotide steps.

Molecular dynamics (MD) simulations including water and counterions on B-DNA oligomers containing all 136 unique tetranucleotide basepair steps are reported. The objective is to obtain the calculated dynamical structure for at least two copies of each case, use the results to examine issues with regard to convergence and dynamical stability of MD on DNA, and determine the significance of sequence context effects on all unique dinucleotide steps. This information is essential to understand sequence effects on DNA structure and has implications on diverse problems in the structural biology of DNA. Calculations were carried out on the 136 cases embedded in 39 DNA oligomers with repeating tetranucleotide sequences, capped on both ends by GC pairs and each having a total length of 15 nucleotide pairs. All simulations were carried out using a well-defined state-of-the-art MD protocol, the AMBER suite of programs, and the parm94 force field. In a previous article (Beveridge et al. 2004. Biophysical Journal. 87:3799-3813), the research design, details of the simulation protocol, and informatics issues were described. Preliminary results from 15 ns MD trajectories were presented for the d(CpG) step in all 10 unique sequence contexts. The results indicated the sequence context effects to be small for this step, but revealed that MD on DNA at this length of trajectory is subject to surprisingly persistent cooperative transitions of the sugar-phosphate backbone torsion angles alpha and gamma. In this article, we report detailed analysis of the entire trajectory database and occurrence of various conformational substates and its impact on studies of context effects. The analysis reveals a possible direct correspondence between the sequence-dependent dynamical tendencies of DNA structure and the tendency to undergo transitions that "trap" them in nonstandard conformational substates. The difference in mean of the observed basepair step helicoidal parameter distribution with different flanking sequence sometimes differs by as much as one standard deviation, indicating that the extent of sequence effects could be significant. The observations reveal that the impact of a flexible dinucleotide such as CpG could extend beyond the immediate basepair neighbors. The results in general provide new insight into MD on DNA and the sequence-dependent dynamical structural characteristics of DNA.

Base Pairing↗

The Amber biomolecular simulation programs.

We describe the development, current features, and some directions for future development of the Amber package of computer programs. This package evolved from a program that was constructed in the late 1970s to do Assisted Model Building with Energy Refinement, and now contains a group of programs embodying a number of powerful tools of modern computational chemistry, focused on molecular dynamics and free energy calculations of proteins, nucleic acids, and carbohydrates.

Algorithms↗

Biomolecular simulations at constant pH.

Like temperature and pressure, the solution pH is an important thermodynamic variable that is commonly varied in experiments and is used by cells to influence biochemical function. It is now becoming feasible to carry out practical molecular dynamics simulations that mimic the thermodynamics of such experiments, by allowing proton transfer between the system of interest and a hypothetical bath of protons at a given pH. These are demanding calculations, because the energetics of charge changes upon protonation or deprotonation must be accurately modeled, and because such simulations must sample both molecular configurations and the large number of protonation states that are possible for a molecule with many titrating sites.

Algorithms↗

Predicting interactions of winged-helix transcription factors with DNA.

Determining protein-DNA interactions is important for understanding gene regulation, DNA repair and chromatin structure. Unfortunately, the structures of DNA-bound complexes are often difficult to obtain experimentally, so the development of computational methods that provide good models of these complexes would be valuable. Here, we present a rigid-body docking approach using the computer program DOT. DOT performs a complete, six-dimensional search of all orientations for two rigid molecules and calculates the interaction energy as the sum of electrostatic and van der Waals terms. DOT was applied to three winged-helix transcription factors that share similar DNA-binding structural motifs but bind DNA in different ways. Docking with linear B-form DNA models accomplished several objectives; it (1) distinguished the different ways the transcription factors bind DNA, (2) identified each protein's DNA-binding site and the DNA orientation at the site and (3) gave at least one solution among the three best-ranked that shows the protein side chain-DNA base interactions responsible for recognition. Furthermore, the ensemble of top-ranked, docked linear B-DNA fragments indicated the DNA bending induced upon protein binding. Docking linear B-DNA to structures of the transcription factor FadR suggests that the allosteric, conformational change induced upon effector binding results in loss of the ability to bend DNA as well as loss of sequence-specific interactions with DNA. The electrostatic energy term calculated by DOT is comparable to the electrostatic binding energy calculated by Poisson-Boltzmann methods. Our results show rigid-body docking that includes a rigorous treatment of the electrostatic interaction energy can be effective in predicting protein-DNA interactions.

Bacterial Proteins↗

Molecular dynamics simulations of the 136 unique tetranucleotide sequences of DNA oligonucleotides. I. Research design and results on d(CpG) steps.

We describe herein a computationally intensive project aimed at carrying out molecular dynamics (MD) simulations including water and counterions on B-DNA oligomers containing all 136 unique tetranucleotide base sequences. This initiative was undertaken by an international collaborative effort involving nine research groups, the "Ascona B-DNA Consortium" (ABC). Calculations were carried out on the 136 cases imbedded in 39 DNA oligomers with repeating tetranucleotide sequences, capped on both ends by GC pairs and each having a total length of 15 nucleotide pairs. All MD simulations were carried out using a well-defined protocol, the AMBER suite of programs, and the parm94 force field. Phase I of the ABC project involves a total of approximately 0.6 mus of simulation for systems containing approximately 24,000 atoms. The resulting trajectories involve 600,000 coordinate sets and represent approximately 400 gigabytes of data. In this article, the research design, details of the simulation protocol, informatics issues, and the organization of the results into a web-accessible database are described. Preliminary results from 15-ns MD trajectories are presented for the d(CpG) step in its 10 unique sequence contexts, and issues of stability and convergence, the extent of quasiergodic problems, and the possibility of long-lived conformational substates are discussed.

Base Sequence↗

Change in protein flexibility upon complex formation: analysis of Ras-Raf using molecular dynamics and a molecular framework approach.

Changes in flexibility upon protein-protein complex formation of H-Ras and the Ras-binding domain of C-Raf1 have been investigated using the molecular framework approach FIRST (Floppy Inclusion and Rigid Substructure Topology) and molecular dynamics simulations (MD) of in total approximately 35 ns length. In a computational time of about one second, FIRST identifies flexible and rigid regions in a single, static three-dimensional molecular framework, whose vertices represent protein atoms and whose edges represent covalent and non-covalent (hydrogen bond and hydrophobic) constraints and fixed bond angles within the protein. The two methods show a very good agreement with respect to the identification of changes in flexibility in both binding partners on a local scale. This implies that flexibility can be successfully predicted by identifying which bonds limit motion within a molecule and how they are coupled. In particular, as identified by MD, the beta-sheet in Raf shows considerably more pronounced orientational correlations in the bound state compared to the unbound state. Similarly, FIRST assigns the beta-sheet to the largest rigid cluster of the complex. Interestingly, FIRST allows us to identify that interactions across the interface (but not conformational changes upon complex formation) result in the observed rigidification. Since regions of the beta-sheet of Raf that do not interact directly with Ras become rigidified, this also demonstrates the long-range aspect to rigidity percolation. Possible implications of the change of flexibility of the Ras-binding domain of Raf on the activation of Raf upon complex formation are discussed. Finally, the sensitivity of FIRST results with respect to the representation of non-covalent interactions used as constraints is probed.

Algorithms↗

Development and testing of a general amber force field.

We describe here a general Amber force field (GAFF) for organic molecules. GAFF is designed to be compatible with existing Amber force fields for proteins and nucleic acids, and has parameters for most organic and pharmaceutical molecules that are composed of H, C, N, O, S, P, and halogens. It uses a simple functional form and a limited number of atom types, but incorporates both empirical and heuristic models to estimate force constants and partial atomic charges. The performance of GAFF in test cases is encouraging. In test I, 74 crystallographic structures were compared to GAFF minimized structures, with a root-mean-square displacement of 0.26 A, which is comparable to that of the Tripos 5.2 force field (0.25 A) and better than those of MMFF 94 and CHARMm (0.47 and 0.44 A, respectively). In test II, gas phase minimizations were performed on 22 nucleic acid base pairs, and the minimized structures and intermolecular energies were compared to MP2/6-31G* results. The RMS of displacements and relative energies were 0.25 A and 1.2 kcal/mol, respectively. These data are comparable to results from Parm99/RESP (0.16 A and 1.18 kcal/mol, respectively), which were parameterized to these base pairs. Test III looked at the relative energies of 71 conformational pairs that were used in development of the Parm99 force field. The RMS error in relative energies (compared to experiment) is about 0.5 kcal/mol. GAFF can be applied to wide range of molecules in an automatic fashion, making it suitable for rational drug design and database searching.

Nucleic Acids↗